13th annual international polymer colloquium - Polymer Engineering ...

11 downloads 193 Views 1MB Size Report
Apr 26, 2013 ... experimental study on extrusion embossing for the replication of ... Centers Building, Room 1025, 1550 Engineering Drive, Madison, WI.
13TH ANNUAL INTERNATIONAL POLYMER COLLOQUIUM Friday, April 26th, 2013 • 8:00am – 5:00pm

Engineering Centers Building, Room 1025, 1550 Engineering Drive, Madison, WI   Agenda     8:00am  –  8:45am  

Registration  and  Breakfast        

8:45am  –  9:00am  

Opening  Remarks  by  Prof.  Tim   Osswald  

9:00am  –  9:25am  

Keynote:  “Highlights  of  Some   Polymer  Processing  Research   Projects,”  Prof.  Musa  Kamal,  McGill   University  

9:25am  –  9:50am  

Keynote:  "Fundamental   mechanisms  of  foaming  observed   from  the  visualization,”  Prof.  Chul  Park,  University  of  Toronto  

©2006 by Emery

9:50am  –  10:15am   Keynote:  "Influence  of  Counter-­‐Pressure  on  the  Fiber  Orientation  of  the   Injection  Molding  Process,"  Prof.  Shia-­‐Chung  Chen,  Vice  President  of  Chung   Yuan  Christian  University   10:15am  –  10:40am   Morning  Break  and  Poster  Session   10:40am  –  11:00am   "Interdependency  of  machine  settings  and  temperature  profiles  –  an   experimental  study  on  extrusion  embossing  for  the  replication  of   microstructures,”  Dipl.-­‐Ing.  Stephan  Eilbracht,  Institute  of  Plastics  Processing   (IKV)  Aachen   11:00am  –  11:20am   "Identification  and  characterization  of  the  significant  property-­‐defining   parameters  of  Natural  Fiber  Composites,”  Dipl.-­‐Ing.Tobias  Koplin,  University   of  Applied  Sciences  and  Arts  Hanover     11:20am  –  11:40am   "3D-­‐CFD-­‐Simulation  of  polymer  plastification  in  a  single  screw  extruder   under  high-­‐speed  conditions,”  Dipl.-­‐Ing.Gregor  Karrenberg,  University  of   Duisburg-­‐Essen   11:40am  –  12:00pm   "Simulation  of  Cooling  using  a  New  Model  for  the  determination  of  the   Thermal  Diffusivity  in  Injection  Molding  by  means  of  the  Radial  Function   Method,"  Dr.  Iván  López,    Foundation  Institute  for  the  Plastic  and  Rubber   Research  and  Training  (ICIPC)    

Polymer Engineering Center University of Wisconsin - Madison

13TH ANNUAL INTERNATIONAL POLYMER COLLOQUIUM Friday, April 26th, 2013 • 8:00am – 5:00pm

Engineering Centers Building, Room 1025, 1550 Engineering Drive, Madison, WI 12:00pm  –  1:00pm   Lunch       1:00pm  –  1:30pm    

Poster  Session      

1:30pm  –  1:50pm  

"Temperature  and  sliding  distance  dependency  of  assembly  molded  friction   clutches,”  Dipl.-­‐Ing.  Daniel  Merken,  Institute  of  Polymer  Technology  (LKT)   Erlangen  

1:50pm  –  2:10pm    

"Innovative  Development  in  Single  Screw  Extrusion,"    Dr.  María  del  Pilar   Noriega,    Foundation  Institute  for  the  Plastic  and  Rubber  Research  and   Training  (ICIPC)  

2:10pm  –  2:30pm    

"Manufacturing  of  elastomeric  hollow  bodies  using  the  projectile  injection   technique,”  Dipl.-­‐Ing.  Clemens  Behmenburg,  Institute  of  Plastics  Processing   (IKV)  Aachen  

2:30pm  –  2:50pm    

"The  Anisotropic  Temperature-­‐Dependent  Thermal  Expansion  Coefficent   (TEC)  of  Short-­‐Fiber-­‐Reinforced  Polymers,”  Dipl.-­‐Ing.  Martina  Vetter,   Institute  of  Polymer  Technology  (LKT)  Erlangen  

2:50pm  –  3:20pm    

Afternoon  Break  and  Poster  Session  

3:20pm  –  3:40pm    

"Blow  molding  of  solid  silicone  rubber,”  Dipl.-­‐Ing.  Anna  Funk,  Institute  of   Plastics  Processing  (IKV)  Aachen  

3:40pm  –  4:00pm    

“New  Scientific  Approaches  for  the  Integration  of  the  Statistical  Design  of   Experiments  for  the  Validation  of  Injection  Molding  Processes  in  Medical   Technology,”  Andrea  Müller,  University  of  Applied  Sciences  Schmalkalden  

4:00pm  –  4:20pm    

"Integrated  Process  Monitoring  and  Process  Control  of  Injection  Molding   Machines  and  Molds,"  Dipl.-­‐Ing.Kruppa  Stefan,  University  of  Duisburg-­‐Essen,   KraussMaffei  Technologies  GmbH  

4:20pm  –  4:30pm    

Closing  Remarks  by  Prof.  Lih-­‐Sheng  (Tom)  Turng    

4:30pm  –  5:00pm  

Tour  of  the  Polymer  Engineering  Center  Laboratory  and  the  Wisconsin   Institutes  for  Discovery  

7:00pm  –  10:00pm   Evening  reception  at  the  Memorial  Union  (Tripp  Commons  room,  800   Langdon  Street,  Madison,  WI)    

Polymer Engineering Center University of Wisconsin - Madison

13TH ANNUAL INTERNATIONAL POLYMER COLLOQUIUM Friday, April 26th, 2013 • 8:00am – 5:00pm

Engineering Centers Building, Room 1025, 1550 Engineering Drive, Madison, WI   Posters  

 

"Calculating  the  Properties  of  Recycled  Materials"   Prof.  Achim  Schmiemann   "Design  of  an  Innovate  and  Recycle  Float-­‐Valve  System  by  using  CAD-­‐CAE-­‐LCA  Tools"   Mariangel  Berroteran,  Maria  Virginia  Candal,  Nelson  Colls   "Use  of  a  Stack  Mould  to  Increase  the  Productivity  and  the  Quality  in  the  Injection  Molding"   Maria  Virginia  Candal,  Orlando  Pelliccioni,  Maria  Elimar  Fernandez   “Transformation  of  Measured  p-­‐v-­‐T-­‐Data  into  Moldflow”   Ruben  Schlutter   “Transformation  of  Measured  Viscosity  Data  into  Moldflow”   Ruben  Schlutter   "Production  of  a  High  Performance  Long-­‐Fiber  Reinforced  Composite  Sailboat  via  Vacuum  Resin  Infusion   Aided  by  Computational  Fluid  Dynamics"   Nick  Grundl,  John  Puentes,  Brian  LaQua,  Josh  Mueller,  Prof.  Tim  A.  Osswald   "Dimensional  Accuracy  in  Selective  Laser  Sintered  Parts"   Tim  Erdmann,  Ben  Cohn,  Ross  Comer,  Michael  Van  Dyke,  Juan  Sebastian  Giraldo,  Sylvana  Garcia,  William   Aquite,  Prof.  Tim  A.  Osswald   "Dimensional  Analysis  of  the  Micropelletization  Processs"   Jeremiah  Shafer,  Nathan  Bentley,  William  Aquite,  Prof.  Tim  A.  Osswald   "Simulation  of  Powder  Flowability  Produced  By  Raleigh  Disturbances  using  CHRONO"   Andreas  Präger,  Hammad  Mazhar,  William  Aquite,  Prof.  Dan  Negrut,  Prof.  Tim  A.  Osswald   "Validation  of  the  Corotational  Maxwell  Model"   Christian  Schäfer,  Prof.  Tim  A.  Osswald     "Warping  of  Fiber  Reinforced  Polymeric  Matrix  Composites.  Case  Study:  Spring-­‐In  of  Carbon  Fiber-­‐Epoxy   Prepregs  Proccesed  via  Oven  Curing  in  Vacuum  Bagging"   John  Puentes,  Lucas  Iervolino,  Brian  LaQua,  Prof.  Tim  A.  Osswald   "Numerical  Simulation  of  Mechanical  Mixing  of  Semi-­‐Solid  Metal”     Linda  Gesenhues,  Sylvana  García-­‐Rodríguez,  Xiaochun  C.  Li,  Prof.  Tim  A.  Osswald   “High-­‐Pressure  Slit  Rheometer”   Roberto  Monroy,  Camilo  Perez,  Thomas  Pfeifer,  Natalie  Rudolph,  Prof.  Tim  A.  Osswald      

Polymer Engineering Center University of Wisconsin - Madison

13TH ANNUAL INTERNATIONAL POLYMER COLLOQUIUM Friday, April 26th, 2013 • 8:00am – 5:00pm

Engineering Centers Building, Room 1025, 1550 Engineering Drive, Madison, WI   “Optimizing  Pipe  Extrusion  Dies  using  CFD  Simulation”   John  Puentes,  Prof.  Tim  Osswald,  Steve  Schick,  Jed  Berg   "D-­‐LFT  Molding  Simulation  –  Verification  of  a  New  Model  for  Fiber  Orientation  Prediction"   Sebastian  Goris,  Michael  Herchet,  Camilo  Perez,  Prof.  Tim  Osswald   "Studies  on  the  Reduction  of  Fiber  Length  during  Processing  of  Glass  Fiber-­‐Reinforced  Polypropylene  in  a   Couette  Device"   Nathalie  El  Barche,  Prof.  Tim  A.  Osswald   “Fiber  Micromechanical  Behavior  during  Polymer  Processing”   Daniel  Ramírez,  Luisa  López,  Abrahan  Bechara,  Jakob  Onken,  Prof.  Tim  A.  Osswald   "Friction  Coefficient  Measurements  Using  a  Timoshenko  and  Van  Karman  Device:  Bulk  Polymers"   Sean  Petzold,  Abdullah  A.  Alshaya,  Dr.  Melih  Eriten,  Prof.  Tim  Osswald   “Modeling  and  Simulation  of  Fiber  Orientation  in  Injection  Molding”   Hongyue  Yuan,  Prof.  Tom  Turng   “Reinforcing  Natural  Rubber  Using  Nanofibrillated  Cellulose”   Chunmei  Zhang,  Prof.  Tom  Turng     "Technologies  of  Microcellular  Injection  Molding  for  Tissue  Scaffold  Fabrication”   Haoyang  Mi,  Prof.  Tom  Turng     “Microcellular  Injection  Molding  Using  CO2/N2  Co-­‐blowing  Agents”   Xiaofei  Sun,  Prof.  Tom  Turng     “Polylactic  acid  (PLA)/Thermoplastic  Polyurethane  (TPU)  Blends  with  Shape  Memory  Behavior”   Xin  Jing,  Prof.  Tom  Turng     “Fabrication  and  Characterization  of  Polyvinyl  Alcohol  (PVA)/Nanofibrilated  Cellulose  (NFC)  Filaments”   Jun  Peng,  Prof.  Tom  Turng     “Preparation  and  Characterization  of  Nonconvalently  Functionalized  Graphene  and  Poly(vinyl  alcohol)   (PVA)”   Xiaodong  Wang,  Prof.  Tom  Turng     "Application  of  the  Variational  Asymptotic  Method  for  Unit  Cell  Homogenization  (VAMUCH)  in  Predicting   Mechanical  Properties  of  Microcellular  Injection  Molded  Plastics"   Emily  Yu,  Prof.  Tom  Turng     "Study  of  Ultrasonic  Field-­‐Enhanced  dispersion  during  Two-­‐Rotor  Continuous  Mixing  Process"    Jin  Sha,  Prof.  Tom  Turng   "Toughening  of  Polylactide  with  Pre-­‐Heat  Treated  Natural  Rubber"   Chunmei  Zhang,  Prof.  Tom  Turng  

Polymer Engineering Center University of Wisconsin - Madison