2003-2006 Suzuki SV 650 Dynojet Research 2191 ... - MotoSport

2003-2006 Suzuki SV 650 I n s ta l l a t i o n I n s t r u c t i o n s

Parts List

1

Power Commander

1

CD-ROM

1

Button Adjustment Display

USB Cable

1

Installation Guide

1

Power Adapter

2

Power Commander Decals

2

Dynojet Decals

2

Velcro

®

1

Strip

Alcohol Swab

Faceplate Buttons

Expansion Port

USB Port

The ignition MUST be turned OFF before installation!

You can also download the Power

Commander software and latest maps

from our web site at:

www.powercommander.com

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com i313-411

2003-2006 Suzuki SV 650 - PCIII USB - 1

Fig. A

Unplug this connector

1

Remove the main seat and the passenger seat.

2

Prop the front of the fuel tank up using the

3

Route the Power Commander harness from

4

Locate the stock, black fuel connector (Fig.

Suzuki prop rod.

the tail section towards the engine.

A).

This connector is located to the left side

of the engine, just inside the frame rail.

Note: Fig. A&B was taken with the air box removed.

The air box does NOT need to be

Fig. B

removed to install the PCIII.

5

Unplug this connector and plug the Power Commander connectors in-line (Fig. B).

Stock

connectors

PCIII

connectors

Fig. C

6

7

Locate the Throttle Position Sensor connector,

located on the left side of the throttle body.

Unplug the connector from the TPS (Fig. C).

Unplug this connector

i313-411



Stock

Fig. D

connector

8

Plug the PCIII wiring harness in-line of the

9

Attach the ground wire from the Power

stock wiring harness and throttle body

PCIII

connectors

Fig. E

Ground wire

(Fig. E).

PCIII harness

10

Install the Power Commander in the tail section.

If you are not going to keep the tool kit

then you can lay the PC flat against the inner

Fig. F i313-411

Commander to the negative side of the battery

fender or you can mount as shown in Fig. F. 11


Bolt the fuel tank back down.

Install the

main seat and the passenger seat.
