We are pleased to announce the schedule for 2013 Technical Training Classes
covering Yazaki. Gas-Fired and Water-Fired Chiller/Heaters as follows:.
Yazaki Energy Systems, Inc. 701 E. Plano Pkwy, Suite 305 Plano, TX 75074-6700 (469) 229-5443 Office (469) 229-5448 FAX
Technical Training Schedule Fall 2013 through 2014 We are pleased to announce the schedule for 2013 Technical Training Classes covering Yazaki Gas-Fired and Water-Fired Chiller/Heaters as follows: WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
September 9-10 (2 days) 9am – 4pm each day
K-Series Gas-Fired Chiller/Heaters
November 18-20 (3 days) 9am – 4pm each day
WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
January 20-21 (2 days) 9am – 4pm each day
Complete Line Class
January 20-24 (5 days) 9am – 4pm each day
WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
March 10-11 (2 days) 9am – 4pm each day
K-Series Gas-Fired Chiller/Heaters
March 24-26 (3 days) 9am – 4pm each day
K-Series Gas-Fired Chiller/Heaters
May 5-7 (3 days) 9am – 4pm each day
WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
May 26-27 (2 days) 9am – 4pm each day
WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
July 14-15 (2 days) 9am – 4pm each day
WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
September 8-9 (2 days) 9am – 4pm each day
WFC-SC/SH Water-Fired Chillers and Chiller/Heaters
October 20-21 (2 days) 9am – 4pm each day
Complete Line Class
October 20-24 (5 days) 9am – 4pm each day
K-Series Gas-Fired Chiller/Heaters
November 17-19 (3 days) 9am – 4pm each day
The scope of the training includes emphasis on absorption theory, electrical and mechanical controls, troubleshooting, and limited hands-on experience including use of simulators and/or models. Students will receive copies of service materials, evacuation service port adapter, service manual(s), and a copy of the Yazaki Master Reference CD. A 90-minute lunch break is provided each day for the students, but meals are not provided. Cost for Training Classes are: Complete Line Class K-Series, MG-Series, WFC-SC/SH Classes
$350.00 per person $150.00 per person
Tool Packages are available at discounted price from our regular tool catalog. These kits are not required for the class. Prior Series Service Manuals Package (Includes Service Manuals for CH-D, CH-G, CH-L, CH-V, and older WFC series units) $400.00 per package ($75 Discount) Tool Kit (water pressure test manifold, phase rotation meter) $425.00 per kit ($120 Discount) Evacuation Kit (tubing, adapter, grease, trap, vacuum gauge) $775.00 per kit ($195 Discount) Yazaki Specialized Tools (10mm torque wrench, Starrett 90 level, graduated cylinder, hydrometer kit) $1,150.00 per kit ($305 Discount) Gas Kit (Honeywell Display Module, UE EM200 digital manometer) $995.00 per kit ($280 Discount) Combustion Analyzer Kit, no NOx, no SOx (TPI 709) (Includes printer and carrying case. No NOx, SOx readout.) $1,250.00 per kit ($300 Discount) Payment or PO Number must be provided with the registration. Training costs for customers with open accounts will be billed once the class is confirmed to be held as scheduled. Training costs are 100% refundable until the week prior to the class. 50% of the training costs are refundable until noon of the last Friday before the class is to be held. No refund of training cost is available if cancellation occurs after noon of the last Friday before the class is to be held. Each participant will be responsible for the cost of travel, lodging, and meals. Please note that a rental car is recommended. A list of nearby hotels is available upon request. To reserve your place, please FAX your registration to the number on the form or email your completed form to the email address given on the registration form. Please be advised that class size is limited. All possible efforts will be made to accommodate those who desire to attend. Classes with fewer than 4 sign-ups may be cancelled. You will receive an email of either confirmation or cancellation with no less than 21 days advanced notice.
Do not make non-refundable travel arrangements until you receive confirmation that the desired class will be held as scheduled! Please be advised, when classes end, traffic between the Yazaki office and the airports is typically quite congested and drive time to the airport could be an hour or more. It is, therefore, recommended that your return flights be scheduled after 7pm or on the next day.
Yazaki Energy Systems, Inc. 701 E. Plano Pkwy, Suite 305, Plano, TX 75074-6700 (469) 229-5443 Office (469) 229-5448 FAX
Technical Training Class Registration Form Please FAX this form to (469) 229-5448 in order to complete registration. Or you may send this information in an email to:
[email protected] Please fill out completely. Please Print or Type clearly.
Name: Company Name: Address: City:
State:
Telephone:
FAX:
Zip:
Email Address:
Name(s) of Attendee(s)
Class to Attend (circle one) K
MG WFC Complete Line
K
MG WFC Complete Line
K
MG WFC Complete Line
Desired Date of Class
Complete Line: $350 x ______ persons = $ K-Series, MG-Series, WFC-Series: $150 x ______ persons = $ Optional Packages: Kit Totals = $ QTY – Optional Package Description ___ - Prior Series Service Manual Package -- $400 ea. ___ - Tool Kit ------------------------------------------- $425 ea. ___ - Evacuation Kit ---------------------------------- $775 ea. ___ - Yazaki Specialized Tools ------------------- $1,150 ea. ___ - Gas Kit -------------------------------------------- $995 ea. ___ - Combustion Analyzer, no NOx, SOx ---- $925 ea.
Authorized Signature: __________________________
Total Due:
$
PO #:
Date: __________________
Payment or PO is required at time of registration. Training costs for open accounts will be billed once class is confirmed to be held as scheduled.
NOTICE: Wait until you receive confirmation that the class will be held as scheduled before making non-refundable travel arrangements!
