AutoCAD 2013 Readme - Autodesk

AutoCAD 2013 Readme

1

This Readme contains important information about AutoCAD® for Mac® that may not be included in Help.

Installation, Configuration, and Hardware Before you use AutoCAD, you should be aware of the following installation and hardware limitations.

Network License Server Setup When using network licensing, you should be aware of the following: ■ The Autodesk Licensing Guide covers how to set up the automatic startup of a network license server, but the steps might vary depending on what version of OS X is running. Refer to your Mac OS X documentation on how to configure an automatic startup service to run the network license server automatically. ■

A client workstation in a pure IPv6 network environment might not be able to successfully obtain a license from a network license server. As a workaround, use both a client workstation and license server in a IPv4 network environment.

Side-by-side Installs The English and French versions of AutoCAD 2013 cannot be installed on the same workstation. If you need to install the English or French version of AutoCAD 2013 on the same workstation, uninstall the existing version of the product before installing the other version.

1

Installing the Product Using the default installation settings is the fastest way to install AutoCAD. A default installation does the following: ■ Performs a Standard installation, which installs the most common application features. ■

Installs the product to the default installation path of /Applications/Autodesk/AutoCAD 2013. 1 Start the AutoCAD Installation wizard. 2 On the Introduction page, click Continue. 3 On the License page, select a language from the Language drop-down list and review the Autodesk software license agreement. Click Continue and then click Agree. 4 On the Register page, select the type of license you are using: Stand alone or Network. Enter your serial number and product key, then click Continue. For more information on network licensing and setting up a license server, see the Autodesk Licensing Guide and Licensing Appendix. NOTE Select I Want to Try this Product for 30 Days and click Continue if you do not have a serial number and product key. You can change it later in the product after it is started. 5 On the Installation Type page, click Install. 6 If the Password dialog box is displayed, enter your password and click OK. 7 On the Summary page, click Close.

You have successfully installed AutoCAD. You are now ready to register and start using the program.

Activating and Registering the Product 1 On the Finder menu bar, click Go ➤ Applications. 2 In the Applications window, double-click Autodesk ➤ AutoCAD 2013 ➤ AutoCAD 2013. 3 In the Autodesk Privacy Statement dialog, select the checkbox and click I Agree to continue. 4 In the AutoCAD for Mac Product License Activation wizard, select Activate, and then click Next.

2 | Chapter 1 AutoCAD 2013 Readme

For more information on activating a network license, see the Licensing Appendix. 5 Click Register and Activate (Get an Activation Code). 6 Click Next and follow the on-screen instructions. If you do not have Internet access, or if you want to use another method of registration, you can register and activate AutoCAD in one of the following ways: ■ Email. Create an email message with your registration information and send it to Autodesk. ■

Fax or Post/Mail. Enter your registration information, and fax or mail the information to Autodesk.

Uninstalling the Product 1 On the Finder menu bar, click Go ➤ Applications. 2 In the Applications window, double-click Autodesk ➤ AutoCAD 2013 ➤ Remove AutoCAD 2013. 3 In the Remove AutoCAD 2013 dialog box, click Continue. 4 Uncheck Leave AutoCAD Preferences on My Computer to remove the current saved user settings and click Continue. 5 If the Password dialog box is displayed, enter your password and click OK. 6 Fill out the Feedback form if desired and the click Close.

Join the Customer Involvement Program You are invited to help guide the direction of Autodesk design software. If you participate in the Customer Involvement Program (CIP), specific information about how you use AutoCAD is forwarded to Autodesk. This information includes what features you use the most, problems that you encounter, and other information helpful to the future direction of the product. See the following links for more information. ■ Learn more about the Autodesk Customer Involvement Program: http://www.autodesk.com/cip ■

Read the Autodesk Privacy Statement: http://www.autodesk.com/cipprivacy

Join the Customer Involvement Program | 3

When you join, you will be able to view reports that can help you optimize your use of AutoCAD.

To turn the CIP on or off 1 On the Mac OS menu bar, click Help ➤ Customer Involvement Program. 2 In the Customer Involvement Program dialog box, select Yes or No to toggle your participation in the program. 3 Click OK.

System Requirements Before you install AutoCAD 2013, make sure that your computer meets the minimum hardware and software requirements listed below. Hardware and Software Requirements

Hardware

Operating Systems

Minimum

Recommended

Model IDs:

Model IDs:

■

MacPro4,1 or later

■

MacPro4,1 or later

■

MacBookPro5,1 or later

■

MacBookPro6,1 or later

■

iMac8,1 or later

■

iMac11,1 or later

■

MacMini3,1 or later

■

MacMini4,1 or later

■

MacBookAir2,1 or later

■

MacBookAir2,1 or later

■

MacBook5,1 or later

■

MacBook7,1 or later

The following versions of Apple® Mac OS® X are supported:

The following versions of Apple Mac OS X are supported:

■

Snow Leopard - 10.6.8 or later

■

Snow Leopard - 10.6.8 or later

■

Lion - 10.7.0 or later

■

Lion - 10.7.2 or later

For more information on Apple Mac OS X Lion see

4 | Chapter 1 AutoCAD 2013 Readme

http://www.apple.com/macosx/. Web Browser

Apple® Safari® 5.0 or later

Apple Safari 5.0 or later

CPU type

64-bit Intel® Processor

64-bit Intel Processor

Memory

3GB RAM

4GB RAM

Hard disk

2.5 GB Free

3 GB Free

■

1 GB Download

■

1.5 GB Installation

Graphics card

All graphics cards of supported hardware For additional information, see Graphics Card Driver Update (page 6).

All graphics cards of supported hardware

Display resolution

1024 x 768 with True Color

1600 x 1200 with True Color

Pointing device

Apple® Mouse, Magic Mouse, Magic Trackpad, MacBook® Pro Trackpad, or MS-Compliant Mouse

Apple Mouse, Magic Mouse, Magic Trackpad, MacBook Pro Trackpad, or MS-Compliant Mouse

Keyboard layouts

All Mac OS X supported languages and keyboard layouts

All Mac OS X supported languages and keyboard layouts

Media

Download and Installation from DVD

Download and Installation from DVD

Printers

All Mac OS X compliant printers

All Mac OS X compliant printers

System Requirements | 5

Graphics Card Driver Update Prior to installing AutoCAD, you will want to make sure your graphics card is supported. To verify if your graphics card is supported, visit http://www.autodesk.com/autocad-graphicscard. If you do not find your graphics card on the list, it may be outside the supported hardware window.

Command and System Variable History This section outlines the new, changed, and removed commands and system variables in this release.

New Commands The following commands were added: ARRAYCLASSIC Creates copies of objects arranged in a 2D pattern using the legacy dialog box. LAYON Turns on all layers in the drawing. LAYTHW Thaws all layers in the drawing. NEWSHEETSET Creates a new project data (DST) file that manages drawing layouts, file paths, and project information. OPENSHEETSET Opens a selected project data (DST) file. PDFADJUST Adjust the fade, contrast, and monochrome settings of a PDF underlay. PDFATTACH Attach a PDF file as an underlay into the current drawing. PDFCLIP Crops the display of a selected PDF underlay to a specified boundary. PDFLAYERS Controls the display of layers in a PDF underlay. SHEETSET Opens the Project Manager. SHEETSETHIDE Closes the Project Manager. SURFEXTRACTCURVE Creates curves on surfaces and 3D solids. ULAYERS Controls the display of layers in a PDF underlay.

6 | Chapter 1 AutoCAD 2013 Readme

Changed Commands The following commands were changed: ACISOUT Exports a body object, solid, or region to an ACIS file. ARRAY Creates copies of objects arranged in a 2D or 3D pattern. ARRAYPATH Evenly distributes object copies along a path or a portion of a path. ARRAYPOLAR Evenly distributes object copies in a circular pattern around a center point or axis of rotation. ARRAYRECT Distributes object copies into any combination of rows, columns, and levels. ATTACH Inserts an external reference, raster image, or underlay (PDF files) in the current drawing. EXTERNALREFERENCES Opens the Reference Manager palette. EXTRUDE Creates a 3D solid or surface by extending a 2D or 3D curve. FIELD Creates a multiline text object with a field that can be updated automatically as the field value changes. GRADIENT Fills an enclosed area or selected objects with a gradient fill. HATCH Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill. HATCHEDIT Modifies an existing hatch or fill. MTEXT Creates multiline text. OPTIONS Customizes the program settings. PRESSPULL Dynamically modifies objects by extrusion and offset. PROPERTIES Controls properties of existing objects. QSAVE Saves the current drawing using the specified default file format. RENAME Changes the names assigned to items such as layers and dimension styles. REVERSE Reverses the vertices of selected lines, polylines, splines, and helixes, which is useful for linetypes with included text, or wide polylines with differing beginning and ending widths.

Command and System Variable History | 7

SAVE Saves the drawing under the current file name or a specified name. SAVEAS Saves a copy of the current drawing under a new file name. SNAP Restricts cursor movement to specified intervals. TEXTTOFRONT Brings text, dimensions, and multileaders in front of all other objects in the drawing.

New System Variables The following system variables were added: ANNOMONITOR Turns the annotation monitor on or off. When the annotation monitor is on, it flags all non-associative annotations by placing a badge on them. ARRAYASSOCIATIVITY Sets the default behavior of new arrays to be associative or non-associative. CACHEMAXFILES Sets the maximum number of graphics cache files saved in the GraphicsCache folder for the product. CACHEMAXTOTALSIZE Sets the maximum total size of all graphics cache files saved in the GraphicsCache folder for the product. PDFFRAME Determines whether the PDF underlay frame is visible. PDFOSNAP Determines whether object snapping is active for geometry in PDF underlays that are attached to the drawing. PLINEREVERSEWIDTH Controls the appearance of a polyline when reversed. SELECTIONPREVIEWLIMIT Limits the number of objects that can display preview highlighting during a window or crossing selection. SNAPGRIDLEGACY Controls whether the cursor snaps to the snap grid only when an operation is in progress. SSFOUND Displays the path and file name if a search for a project file is successful. SSLOCATE Controls whether the project associated with a drawing is located and opened when the drawing is opened. SSMAUTOOPEN Controls the display behavior of the Project Manager when a drawing associated with a layout is opened. SSMPOLLTIME Controls the time interval between automatic refreshes of the status data in a project.

8 | Chapter 1 AutoCAD 2013 Readme

SSMSHEETSTATUS Controls how the status data in a project is refreshed. SSMSTATE Indicates whether the Project Manager window is open or closed. THUMBSAVE Controls whether thumbnail preview images are created and saved with the drawing. THUMBSIZE Specifies the display resolution in pixels for all thumbnail preview images. UOSNAP Determines whether object snapping is active for geometry in PDF underlays that are attached to the drawing.

Changed System Variables The following system variables were changed: FRAME Controls the display of frames for all images, PDF underlays, and clipped xrefs. FRAMESELECTION Controls whether the frame of an image, PDF underlay, or clipped xref can be selected. SELECTIONPREVIEW Controls the display of selection previewing.

Removed System Variables The following system variables were removed: ACISOUTVER Controls the ACIS version of SAT files created using the ACISOUT command. RASTERPREVIEW Controls whether thumbnail preview images are created and saved with the drawing. Replaced with the THUMBSAVE system variable.

Trademarks © 2012 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted

by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks

Trademarks | 9

The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 123D, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Homestyler, Autodesk Intent, Autodesk Inventor, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSketch, AutoSnap, AutoTrack, Backburner, Backdraft, Beast, Beast (design/logo) Built with ObjectARX (design/logo), Burn, Buzzsaw, CAiCE, CFdesign, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Creative Bridge, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (design/logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DWFX, DXF, Ecotect, Evolver, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, Homestyler, HumanIK, IDEA Server, i-drop, Illuminate Labs AB (design/logo), ImageModeler, iMOUT, Incinerator, Inferno, Instructables, Instructables (stylized robot design/logo),Inventor, Inventor LT, Kynapse, Kynogon, LandXplorer, LiquidLight, LiquidLight (design/logo), Lustre, MatchMover, Maya, Mechanical Desktop, Moldflow, Moldflow Plastics Advisers, Moldflow Plastics Insight, Moldflow Plastics Xpert, Moondust, MotionBuilder, Movimento, MPA, MPA (design/logo), MPI, MPI (design/logo), MPX, MPX (design/logo), Mudbox, Multi-Master Editing, Navisworks, ObjectARX, ObjectDBX, Opticore, Pipeplus, Pixlr, Pixlr-o-matic, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProMaterials, RasterDWG, RealDWG, Real-time Roto, Recognize, Render Queue, Retimer, Reveal, Revit, RiverCAD, Robot, Scaleform, Scaleform GFx, Showcase, Show Me, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels, Stitcher, Stone, StormNET, Tinkerbox, ToolClip, Topobase, Toxik, TrustedDWG, U-Vis, ViewCube, Visual, Visual LISP, Voice Reality, Volo, Vtour, WaterNetworks, Wire, Wiretap, WiretapCentral, XSI. All other brand names, product names or trademarks belong to their respective holders. Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.

10 | Chapter 1 AutoCAD 2013 Readme