Gasket set for Amal 389 carb. £ 2.40 £ 2.00. Gasket set for Amal 600/900 Mk1
Concentrics. £ 2.04 £ 1.70. 000581. Gasket for carb. £ 0.65 £ 0.54. 000581T.
Part No.
000581 000581T 010676 41-G3L-E167 021346 015875 021252 021002 023496 024308 018503 041014 14-021 376-077 376-079 14-015 14-024 376-083 376-094 14-024
AJS & MATCHLESS CARBURETTER - NEW PARTS
Price (20% VAT)
Price (excl VAT)
Gasket set for Amal 276, 76 & 89 carbs Gasket set for Amal 375 carb Gasket set for Amal 376 carb Gasket set for Amal 389 carb Gasket set for Amal 600/900 Mk1 Concentrics Gasket for carb Carb spacer, 1/16" thick, suitable replacement for 000581 gasket, provides better insulation Carburetter spacer, 1" bore, 1941-53 350cc
£ £ £ £ £ £ £
3.65 2.50 2.50 2.75 2.40 0.80 1.00
£ £ £ £ £ £ £
3.04 2.08 2.08 2.29 2.00 0.67 0.83
£
9.75
£
8.13
Carburetter spacer, 1 1/16" bore Carburetter spacer, 1 1/8" bore. Use for 37-G3C-E167 - same dimensions but was alloy.
£ £
9.25 9.55
£ £
7.71 7.96
Carburetter spacer, 1 5/32" bore Carburetter spacer, 1 3/16" bore Carburetter spacer, 1957-on 500cc & 600cc twins, original tufnol type (1" bore, can be used on earlier twins) Carburetter spacer, 650cc twins, original tufnol type (1 1/8" bore) Rubber sealing ring for carburetter flange & manifold, 1956-on singles, 1953-on twins Rubber sealing ring for carburetter flange, 1962-on HW; for carburetter spacer, all LW
£ £ £
9.25 9.75 5.90
£ £ £
7.71 8.13 4.92
£ £ £
5.90 0.25 0.45
£ £ £
4.92 0.21 0.38
Screw locking float chamber top, Pre-Monoblocs Side cover, float chamber, all Monoblocs Screws for float chamber side cover, set of 3, all Monoblocs Float & needle with clip, Pre-Monoblocs
£ £ £ £
5.00 8.00 2.40 22.25
£ £ £ £
4.17 6.67 2.00 18.54
Float & bush, 'Stay-Up' improved version for modern fuel, all Monoblocs
£
13.00
£
10.83
Float needle, Pre-Monoblocs (NB suits all original-specification float chambers but not
£
10.25
£
8.54
Float needle, viton tipped, all Monoblocs Float needle, viton tipped, & seating, all Monoblocs
£ £
4.25 14.70
£ £
3.54 12.25
Ring securing mixing chamber cap, 76 Pre-Monobloc Ring securing mixing chamber cap, 89 Pre-Monobloc Ring securing mixing chamber cap, 376 Monobloc Ring securing mixing chamber cap, 389 Monobloc Spring clip for mixing chamber cap securing ring, 275, 276, 76 & 376 Monobloc Spring clip for mixing chamber cap securing ring, 89 & 389 Monobloc Screw securing cap ring spring clip, all Amal Pre-Monobloc & Monobloc carbs Cap for mixing chamber, 376 Monobloc Cap for mixing chamber, 389 Monobloc Control cable adjuster Air valve, 76 & 276 Pre-Monoblocs Air valve, 89 Pre-Monobloc Air valve, 376 Monobloc Air valve, 389 Monobloc Air valve spring, all Amal Pre-Monobloc & Monobloc carbs Guide for air valve spring, 276, 76 & 376 Monobloc Guide for air valve spring, 89 & 389 Monobloc Throttle valve, 76 & 276 Pre-Monobloc, size 4 Throttle valve, size 3½, 350cc & 600cc twin 376 Monobloc Throttle valve, size 4, 500cc twin 376 Monobloc Throttle valve, 389 Monobloc, size 3: LW CSR, 500cc CS, 1964-on 350cc & 500cc HW, 1959 650cc & 750cc Throttle valve, size 3½, 500cc single 389 Monobloc Throttle valve, size 4, 650cc Throttle valve spring, 275F Pre-Monoblocs Throttle valve spring, 76D, AE, AG, AL & AT Pre-Monoblocs (NB 1946-58 spares lists
£ 10.20 £ 10.90 £ 8.50 £ 8.50 £ 2.50 £ 2.50 £ 0.50 £ 16.50 £ 16.50 £ 1.25 £ 12.50 £ 7.30 £ 7.50 £ 7.50 £ 1.50 £ 2.80 £ 6.35 £ 49.50 £ 18.75 £ 18.75 £ 20.68
£ £ £ £ £ £ £ £ £ £ £ £ £ £ £ £ £ £ £ £ £
8.50 9.08 7.08 7.08 2.08 2.08 0.42 13.75 13.75 1.04 10.42 6.08 6.25 6.25 1.25 2.33 5.29 41.25 15.63 15.63 17.23
£ £ £ £
18.75 18.75 4.20 2.20
£ £ £ £
15.63 15.63 3.50 1.83
£ £ £ £
1.65 1.65 1.65 3.60
£ £ £ £
1.38 1.38 1.38 3.00
later types with 2- prefix) 376-089 376-088 376-089 6-031 29-041 376-065 389-065 4-235 29-201 4-241 376-064 389-064 4-035 6-045 29-055 376-062 389-062 4-046 6-047 29-057 6-052 376-060 376-060 389-060 389-060 389-060 4-037 29-047
state 4/037 for 76D but Amal spares lists states 29/047; 1954 spares list states 4/263 for 76AT but Amal spares list states 29/047) 4-263 376-061 389-061 4-063
Throttle Throttle Throttle Throttle
valve spring, 276, 76AV, 89B, M & N Pre-Monoblocs valve spring, 376 Monobloc valve spring, 389 Monobloc stop screw (NB WD spares lists are wrong - use this part)
376-068 376-069 13-129 4-206 332-017 4-148 6-065 4-230 29-075 4-230 375-063 4-230 376-063 4-230 389-063 4-230 4-230 4-061 29-076 376-072 4-042 376-100 622-104 376-073 376-075 376-076 376-095 389-056 376-070 14-035 14-345 14-036 376-097 376-098 376-091 376-093 14-209 14-210 14-032 4-060 343-011 376-086 376-087 6-038 376-066 014583
014592 022129 022130 029493
Throttle stop screw with spring, all Monoblocs
£
3.20
£
2.67
Screw, pilot air adjustment, all Amal Pre-Monobloc carbs Lock nut for 13/129 pilot air adjustment screw and 4/063 throttle valve stop screw Screw & spring, pilot air adjusting, all Monoblocs
£ £ £
3.75 0.70 3.00
£ £ £
3.13 0.58 2.50
Needle, taper, for needle jet, & clip, Amal 76 & 276 carbs
£
10.00
£
8.33
Needle, taper, for needle jet, & clip, Amal 89 carb
£
7.50
£
6.25
Needle & clip, 375 Monobloc
£
5.00
£
4.17
Needle & clip, 376 Monobloc
£
8.00
£
6.67
Needle & clip, 389 Monobloc
£
7.50
£
6.25
Clip for taper jet needle, all Amal Pre-Monobloc & Monobloc carbs Needle jet, 275, 76 & 276 carbs Needle jet, 89 carb Needle jet, Monobloc, .106 Main jet, Pre-Monobloc, sizes: 120, 130, 140, 150, 160, 170, 180, 190 Main jet, Monobloc, sizes: 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 380, 390, 400, 410, 420, 430, 440, 450, 460 Jet key, for jet fitment & removal Holder for main jet Cover for main jet Pilot jet, Monobloc, sizes: 20, 25, 30 Nut for pilot jet cover Jet block, 1 1/8", 650cc, 350cc CS Peg locating jet block Banjo for petrol feed, single connection, threaded type, Pre-Monobloc carbs Banjo for petrol feed, single connection, accepts push-on rubber piping, Pre-Monobloc carbs Nut retaining banjo connection to float chamber, Pre-Monobloc carbs Banjo for petrol feed, single connection, singles with Monobloc (metal) Banjo for petrol feed, double connection 45°, twins with Monobloc (metal) Banjo for petrol feed, double connection 90°, twins with Monobloc (metal) Bolt for petrol feed banjo, Monobloc Plastic filter for petrol feed Tickler assembly with plunger, sleeve, pin & spring, all Pre-Monoblocs
£ £ £ £ £ £
1.50 5.75 4.40 3.00 4.50 2.25
£ £ £ £ £ £
1.25 4.79 3.67 2.50 3.75 1.88
£ £ £ £ £ £ £ £ £
9.00 7.50 3.15 4.00 2.30 39.73 0.75 11.23 8.00
£ £ £ £ £ £ £ £ £
7.50 6.25 2.63 3.33 1.91 33.11 0.63 9.36 6.67
£ £ £ £ £ £ £
7.91 3.25 8.00 6.25 2.10 1.80 3.60
£ £ £ £ £ £ £
6.60 2.71 6.67 5.21 1.75 1.50 3.00
Tickler assembly with body, plunger & spring, all Monoblocs
£
4.00
£
3.33
Air intake venturi/bellmouth for Amal 76 & 276, polished alloy Air intake venturi/bellmouth for 376 Monobloc, polished alloy Air cleaner, pre-1955 Singles. Original thin 'pancake' type. NB adaptor is required to
£ 3.30 £ 3.37 £ 22.00
£ £ £
2.75 2.81 18.33
£ £ £ £
3.00 3.50 3.75 9.50
£ £ £ £
2.50 2.92 3.13 7.92
£ £
8.00 23.50
£ £
6.67 19.58
£ £
12.50 8.00
£ £
10.42 6.67
fit but this is not included with cleaner (see below). Will only fit Pre-Monobloc carbs - mounting hole is too small to fit Monoblocs. Adaptor for 76 & 276 carbs coming soon. Adaptor for air cleaner, replaces bellmouth, Adaptor for air cleaner, replaces bellmouth, Adaptor for air cleaner, replaces bellmouth, Rubber hose for carb to air cleaner, 1963-on
to fit Amal 89 carb to fit 376 Monobloc to fit 389 Monobloc CS singles (NB will only fit 029701 air
cleaner - filter end of hose is too large to fit 1960-62 026607 air cleaner) 042775/1
019824
Clip for 029493 air cleaner hose, stainless-steel Air cleaner, round with thread-on type central hole to fit 389 Monobloc, black with chrome grille on outside edge. Diameter 4 7/8"; depth 1 11/16" (2" including mounting stub). Doesn't fit all years/models so check depth Air cleaner, as above, to fit 376 Monobloc Junction box, 2 into 1, for air & throttle cables, twins fitted with twin carbs