Participants must follow on-line the “Introduction to CCTV” course prior to
attending ... This training course is intended for Installation / Service technicians
and ...
CCTV Training Analog and IP solutions 3 Days Technical Training Tr ai nin g S yll a b u s & A g e n d a
Page 1 / 5
Purpose of this Document The purpose of this document is to provide an overview and course outline for technical training on Honeywell CCTV Solutions. Pre-requisites Participants to this course should preferably have knowledge of: ✔ ✔
Basics in CCTV (analog cameras, DVRs) Knowledge of TCP/IP Network topology.
Participants must follow on-line the “Introduction to CCTV” course prior to attending this training Medium of training The training is delivered in English Language. Objective This training course is intended for Installation / Service technicians and Administrators or anybody who will be involved with installing and maintaining Honeywell CCTV systems. Training Session Duration The time period to be reserved for this training session is 3 full day’s where each day will have (2) intermediate breaks and a lunch. Travel for participants will have to be scheduled in such way that the participating engineer(s) will have sufficient time to complete the full training course. Certificates will be provided after students have successfully participated in the test at the end of the training.
CCTV Systems Training – Overview The purpose of this training session is to build a solid working knowledge of Honeywell Video Solutions. This training will cover analog, Hybrid and IP solutions and products. Hands-on exercises will help the attendees to build experience on the subjects. The following items will be discussed during the training session: ✔ ✔ ✔ ✔ ✔ ✔ ✔
Fusion IV DVR and storage solutions Fusion IV NVR HRDP DVR Fusion Video Management Software for Fusion and HRDP DVRs. IP cameras (Standard 4CIF, Megapixel, High Definition) Video analytics Videoblox Analog Matrix
At the end of the course all students will receive a complimentary CD which contains Product documentation, product related tools, presentations, Page 2 / 5
Training Hardware Equipments For hands-on sessions, there are 5 sets of hardware with the following items. This is intended for 10 participants and 1 set to be shared by 2 attendees. ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 Laptop Set of IP cameras (01 Megapixel, 01 HD, 01 4CIF) IP Utility Software FVMS Software HRDP Remote Software Fusion Remote Software Videoblox Configuration software
Software Each student will learn how to perform a complete installation of the softwares mentioned above.. Students will learn as well how to configure the DVRs using the remote softwares and how to set-up the IP cameras prior to adding them to the Fusion DVR/NVR.
Course outline Day #1 Session starts at 09:30 and ends by 16:30. Each day will have 2 intermediate breaks (at 11:00 and 14:45) and lunch break (12:30 to 13:30). ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
Ιntroduction and warm-up Fusion IV DVR Presentation Overview of DVR menu and configuration Set-up of recording schedule (motion detection, continuous, sensor input..) Set-up and connection of a PTZ camera Set-up and connection of HJZTPX keyboard Hands-on session FVMS Presentation FVMS Installation and set-up ✔ Add-on of Fusion DVR to FVMS software ✔ Set-up and configuration of multiple DVRs using FVMS software ✔ Creation of customized scenes ✔ Alarm Management (motion detection, senor inputs, video loss) ✔ Add-on of Maps and site layout ✔ Health-check configuration ✔ User Management and authority levels ✔ Search of recorded videos ✔ Network Backup (scheduled and manual) ✔ Clip export Network bandwidth and storage calculation Hands-on Session Page 3 / 5
Day #2 Session starts at 09:30 and ends by 16:30. Each day will have 2 intermediate breaks (at 11:00 and 14:45) and lunch break (12:30 to 13:30). ✔ Questions and Answers of previous day’s topics ✔ Ιntroduction and warm-up ✔ HRDP Presentation ✔ Overview of DVR menu and configuration ✔ Set-up of recording schedule (motion detection, continuous, sensor input..) ✔ Set-up and connection of a PTZ camera ✔ Add-on of HRDP DVR to FVMS software ✔ Set-up and configuration of HRDP DVR from FVMS ✔ Hands-on Session ✔ ✔ ✔
✔ ✔
✔
Presentation of IP Cameras Set-up of cameras using IP utilities Camera Menu ✔ Network settings (Compression, frame rate, Resolution, bit rate..) ✔ Display settings (BLC, Gain...) ✔ Sabotage detection ✔ I/O configuration ✔ Embedded motion detection ✔ Privacy zone set-up ✔ Definition of presets and tours in case of PTZ camera Hands-on session Presentation Fusion NVR ✔ Overview of NVR menu and configuration ✔ Add-on IP cameras into Fusion NVR ✔ IP Camera Setup from Fusion NVR menu ✔ Set-up of recording schedule Hands-on session
Day #3 Session starts at 09:30 and ends by 16:30. Each day will have 2 intermediate breaks (at 11:00 and 14:45) and lunch break (12:30 to 13:30). ✔ ✔
Questions and Answers of previous day’s topics Introduction to Videoblox Analog Matrix ✔ Overview of architecture ✔ CPU and Chassis configuration ✔ Video Input and output modules configuration ✔ PIT configuration and connection of a PTZ dome ✔ Keyboard setup ✔ Setup of Videoblox Matrix using VBLX NetCFG software ✔ System sizing ✔ Definition of camera inputs and monitor outputs Page 4 / 5
Definition of scenes and group of cameras Users creation and definition of access rights (cameras, monitors, keyboards) ✔ Creation of sequences and overview of different commands ✔ Database Backup Hands-on session ✔ ✔
✔
✔ ✔
✔
✔
Introduction to Video Analytics System components and architecture overview Embedded V.A on RapidEye DVR presentation ✔ Camera Placement and Lens selection ✔ Lens calculator tool overview ✔ Video and Channel setup ✔ Scene Setup ✔ Zone setup ✔ Events setup ✔ Alarm Management and notification Hands-on session ✔ Exclusion zone ✔ Object block zone ✔ Restricted zone ✔ Direction zone ✔ Trespass Zone ✔ Fence zone ✔ Inside/Outside zone (people counting) Test and Conclusion
Page 5 / 5