Class G - Mountain Cement Company

24 downloads 77 Views 211KB Size Report
Lot # 334. Date: 11/30/13. Chemical Analysis(%) - ASTM C 114. Physical and Performance Tests - A.P.I. Spec. 10A. MgO. 0.9 Blaine Fineness – ASTM C204.
Certificate of Test Class G Well Cement Grade MSR May 30, 2017 Lot 150 Chemical Requirements - Table 1 Item MgO SO3 Loss on Ignition Insoluble Residue C3S, % C3A, % Equivalent Alkalies, %

Spec Limit 6.0 max 3.0 max 3.0 max 0.75 max 48 to 58 8 max 0.75 max

Physical and Performance Requirements – Table 2 Result 1.0 3.0 1.2 0.38 58 5 0.62

Item Free-Fluid Content, % Compressive Strengths, PSI 8 hours @ 38° C 8 hours @ 60° C Schedule 5 Thickening Time, minutes

Spec Limit 5.9 max

Result 5.0

300 min 1,500 min 90 to 120

1090 2460 102

This cement has been sampled and tested in accordance with API Specification 10A. Cement analysis are reported as oxides, in accordance with ASTM Test Method C114. This cement is manufactured at our Laramie, Wyoming facility. All test results are certified to comply with the type specification designated. We are not responsible for improper use or workmanship.

Bob Kersey Chief Chemist

AASHTO Accredited since 1996