Compact dual-band circular polarizer using twisted ... - OSA Publishing

Compact dual-band circular polarizer using twisted Hilbert-shaped chiral metamaterial He-Xiu Xu,1,2,* Guang-Ming Wang,1 Mei Qing Qi,2 Tong Cai,1 and Tie Jun Cui2,3 2

1 Missile institute, Air Force Engineering University, Xi’an 710051, Shaanxi, China State Key Laboratory of Millimeter Waves, Southeast University, Nanjing 210096, Jiangsu, China 3 [email protected] *[email protected]

Abstract: We propose a kind of chiral metamaterial inspired from the fractal concept. The Hilbert fractal perturbation in the twisted split ring resonator element results in compact metamaterial and breaking mirror symmetry, which readily forms chirality over triple bands. The discrepancy between co-polarization conversion and cross-polarization conversion over multiple bands can be explored for multifunctional devices. A multiband circular polarizer is then numerically and experimentally studied in the X band based on the bilayered twisted Hilbert resonator with mutual 90° rotation. The ability of transforming linearly polarized incident waves to circularly polarized waves is unambiguously demonstrated with high conversion efficiency and large polarization extinction ratio of more than 20 dB across dual bands. Moreover, exceptionally strong optical activity and circular dichroism are also observed. ©2013 Optical Society of America OCIS codes: (160.3918) Metamaterials; (160.1585) Chiral media; (260.5740) Resonance; (260.5430) Polarization.

References and links 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

J. Y. Chin, J. N. Gollub, J. J. Mock, R. Liu, C. Harrison, D. R. Smith, and T. J. Cui, “An efficient broadband metamaterial wave retarder,” Opt. Express 17(9), 7640–7647 (2009). Y. Ye and S. He, “90o polarization rotator using a bilayered chiral metamaterial with giant optical activity,” Appl. Phys. Lett. 96(20), 203501 (2010). J. Han, H. Li, Y. Fan, Z. Wei, C. Wu, Y. Cao, X. Yu, F. Li, and Z. Wang, “An ultrathin twist-structure polarization transformer based on fish-scale metallic wires,” Appl. Phys. Lett. 98(15), 151908 (2011). Z. Wei, Y. Cao, Y. Fan, X. Yu, and H. Li, “Broadband polarization transformation via enhanced asymmetric transmission through arrays of twisted complementary split-ring resonators,” Appl. Phys. Lett. 99(22), 221907 (2011). M. Mutlu and E. Ozbay, “A transparent 90° polarization rotator by combining chirality and electromagnetic wave tunneling,” Appl. Phys. Lett. 100(5), 051909 (2012). Y. Cheng, Y. Nie, X. Wang, and R. Gong, “An ultrathin transparent metamaterial polarization transformer based on a twist-split-ring resonator,” Appl. Phys., A Mater. Sci. Process. 111(1), 209–215 (2013). J. K. Gansel, M. Thiel, M. S. Rill, M. Decker, K. Bade, V. Saile, G. von Freymann, S. Linden, and M. Wegener, “Gold helix photonic metamaterial as broadband circular polarizer,” Science 325(5947), 1513–1515 (2009). M. Euler, V. Fusco, R. Cahill, and R. Dickie, “325 GHz single layer sub-millimeter wave FSS based split slot ring linear to circular polarization convertor,” IEEE Trans. Antenn. Propag. 58(7), 2457–2459 (2010). Y. Ye, X. Li, F. Zhuang, and S.-W. Chang, “Homogeneous circular polarizers using a bilayered chiral metamaterial,” Appl. Phys. Lett. 99(3), 031111 (2011). Y. Zhao, M. A. Belkin, and A. Alù, “Twisted optical metamaterials for planarized ultrathin broadband circular polarizers,” Nat Commun 3, 870 (2012). M. Mutlu, A. E. Akosman, A. E. Serebryannikov, and E. Ozbay, “Asymmetric chiral metamaterial circular polarizer based on four U-shaped split ring resonators,” Opt. Lett. 36(9), 1653–1655 (2011). X. Ma, C. Huang, M. Pu, C. Hu, Q. Feng, and X. Luo, “Multi-band circular polarizer using planar spiral metamaterial structure,” Opt. Express 20(14), 16050–16058 (2012). S. Yan and G. A. E. Vandenbosch, “Compact circular polarizer based on chiral twisted double split-ring resonator,” Appl. Phys. Lett. 102(10), 103503 (2013). V. A. Fedotov, P. L. Mladyonov, S. L. Prosvirnin, A. V. Rogacheva, Y. Chen, and N. I. Zheludev, “Asymmetric Propagation of Electromagnetic Waves through a Planar Chiral Structure,” Phys. Rev. Lett. 97(16), 167401 (2006).

#197084 - $15.00 USD Received 4 Sep 2013; accepted 27 Sep 2013; published 10 Oct 2013 (C) 2013 OSA 21 October 2013 | Vol. 21, No. 21 | DOI:10.1364/OE.21.024912 | OPTICS EXPRESS 24912

15. C. Menzel, C. Helgert, C. Rockstuhl, E.-B. Kley, A. Tünnermann, T. Pertsch, and F. Lederer, “Asymmetric transmission of linearly polarized light at optical metamaterials,” Phys. Rev. Lett. 104(25), 253902 (2010). 16. M. Kang, J. Chen, H. X. Cui, Y. Li, and H. T. Wang, “Asymmetric transmission for linearly polarized electromagnetic radiation,” Opt. Express 19(9), 8347–8356 (2011). 17. M. Mutlu, A. E. Akosman, A. E. Serebryannikov, and E. Ozbay, “Diodelike asymmetric transmission of linearly polarized waves using magnetoelectric coupling and electromagnetic wave tunneling,” Phys. Rev. Lett. 108(21), 213905 (2012). 18. C. Huang, Y. Feng, J. Zhao, Z. Wang, and T. Jiang, “Asymmetric electromagnetic wave transmission of linear polarization via polarization conversion through chiral metamaterial structures,” Phys. Rev. B 85(19), 195131 (2012). 19. J. Xu, X. Zhuang, P. Guo, W. Huang, W. Hu, Q. Zhang, Q. Wan, X. Zhu, Z. Yang, L. Tong, X. Duan, and A. Pan, “Asymmetric light propagation in composition-graded semiconductor nanowires,” Sci Rep 2, 820 (2012). 20. J. Zhou, J. Dong, B. Wang, T. Koschny, M. Kafesaki, and C. Soukoulis, “Negative refractive index due to chirality,” Phys. Rev. B 79(12), 121104 (2009). 21. Z. Li, R. Zhao, T. Koschny, M. Kafesaki, K. B. Alici, E. Colak, H. Caglayan, E. Ozbay, and C. M. Soukoulis, “Chiral metamaterials with negative refractive index based on four “U” split ring resonators,” Appl. Phys. Lett. 97(8), 081901 (2010). 22. D. H. Kwon, P. L. Werner, and D. H. Werner, “Optical planar chiral metamaterial designs for strong circular dichroism and polarization rotation,” Opt. Express 16(16), 11802–11807 (2008). 23. M. Decker, R. Zhao, C. M. Soukoulis, S. Linden, and M. Wegener, “Twisted split-ring-resonator photonic metamaterial with huge optical activity,” Opt. Lett. 35(10), 1593–1595 (2010). 24. J. Hao, Y. Yuan, L. Ran, T. Jiang, J. A. Kong, C. T. Chan, and L. Zhou, “Manipulating electromagnetic wave polarizations by anisotropic metamaterials,” Phys. Rev. Lett. 99(6), 063908 (2007). 25. W. Sun, Q. He, J. Hao, and L. Zhou, “A transparent metamaterial to manipulate electromagnetic wave polarizations,” Opt. Lett. 36(6), 927–929 (2011). 26. D. Zari, H. Oraizi, and M. Soleimani, “Improved performance of circularly polarized antenna using semi-planar chiral metamaterial covers,” Prog. Electromagnetics Res. 123, 337–354 (2012). 27. J. H. Shi, H. F. Ma, W. X. Jiang, and T. J. Cui, “Multiband stereometamaterial-based polarization spectral filter,” Phys. Rev. B 86(3), 035103 (2012). 28. H. X. Xu, G. M. Wang, C. X. Zhang, and Q. Peng, “Hilbert-shaped complementary single split ring resonator and low-pass filter with ultra-wide stopband, excellent selectivity and low insertion-loss,” AEU, Int. J. Electron. Commun. 65(11), 901–905 (2011).

1. Introduction In recent years, chiral metamaterials (CMMs) have intrigued much interest and have been extensively investigated in terms of linear [1–6] or circular polarizers [7–13], asymmetric transmissions [14–19], and negative refractive index [20,21] for their unique electromagnetic (EM) characteristics such as elliptical or circular dichroism, bianisotropy, and magneto-electric coupling. Giant chirality and optical activity are also observed on the basis of these original physics [22,23]. Due to the anisotropic EM properties (i.e., the lack of mirror symmetry), CMMs exist considerable cross-coupling between electric and magnetic fields at resonance and provide strong chirality around resonance, leading to the breaking of the degeneracy between the right-handed circularly polarized (RCP) and left-handed circularly polarized (LCP) EM waves and different transmission coefficients. Under this condition, CMMs also have the capability of tailoring the propagation state of EM waves [24,25]. The constitutive relations in a chiral medium associated with the strength of the coupling, namely chirality parameter κ, can be written as [20]  D   ε 0ε iκ /c   E   B  =  -iκ /c μ μ   H      0 

(1)

where ε0 and μ0 are the permittivity and permeability in vacuum, ε and μ are the relative permittivity and permeability of the chiral medium, and c is the speed of light in vacuum. A survey of recent literature indicates that CMMs have also been found in the applications of antenna [26] and polarization spectra filter [27], etc. For the circular polarizers, three-dimensional (3D) gold helical metamaterials have been employed to obtain broadband chirality and thus broadband circular polarizer exceeding one octave [7]. However, only one kind of circularly polarized waves can be transformed by such helix CMM, and the realization


and fabrication in the visible wavelength range is hindered by the minimum realizable features imposed by the diffraction limit. Most recently, Alu et al. proposed an alternative avenue of stacked nanorod arrays with a tailored rotational twist to obtain the analogous broadband 3D chiral effects and to simultaneously relax the requirement on fabrication [10]. U-shaped split ring resonator with only one ring (SRR) [21,23] is commonly arranged in four-fold rotational symmetry (C4) and thus the optical activity is insensitive to the plane polarization angle of the incident linearly polarized wave. Meanwhile, based on the same concept, Ye et al. proposed a wheel pattern composed of a cross and a four-gap split ring that exhibits C4 symmetry to obtain circular polarizer with arbitrary polarizations [9]. However, the CMMs in [21] and [23] have relatively low polarization extinction ratio and polarization-conversion efficiency. To address these issues over dual or multiple operation bands, asymmetric U-shaped SRR pair [11], planar spiral structure [12], and twisted split ring resonators (SRRs) with double or more concentric rings [13] have afterwards been continuously reported. However, to the authors’ best knowledge, most meta-atoms utilized in previous articles are not compact enough except for that proposed in [13]. Moreover, it seems that the twisted SRR is rarely reported in the circular-polarization transformation although it has been reported to convert the linear polarization to its cross polarization. In the scenario of electrically large elements, the resulting metamaterial slab or bulk medium is more influenced by the parasitic diffraction effects than that made of compact elements, and the collective electromagnetic response cannot be described appropriately by the macroscopic constitutive material parameters defined under the effective medium approximation. In this frame, the elements in deep subwavelength would benefit considerably the design to some degrees.

Fig. 1. (a) Schematic and (b) parameter illustration of the proposed CMM unit cell. (c) Photograph of the fabricated sample, and (d) its orientation with the incident wave. The geometrical parameters are designed as p = 6.6 mm, ax = 1.08 mm, ay = 0.78 mm, bx = 4.44 mm, by = 5.04 mm, h = 1 mm, and d = g = 0.24 mm.


2. Fundamentals and design In this work, we present a type of alternative compact CMM that is capable of emitting circularly polarized waves from linearly polarized incident wave with high transformation coefficients over dual microwave bands under the normal incidence. The chiral behavior is enhanced by the fractal perturbation and thus renders the twisted SRR the capability of linear-to-circular conversion. Figures 1(a) and 1(b) show the schematic and geometrical parameters of the proposed meta-atom that is utilized as the basic building block of the CMM circular polarizer. The meta-atom is composed of two metallic SRR with Hilbert fractal curve of second iteration order on both sides of a dielectric substrate twisted by 90° with respect to each other. The metallic pattern is the dual part of the complementary structure proposed in [28], which is a variation of conventional Hilbert curve. The plane wave with linear polarization along x or y-direction normally impinges on the sample along z-direction. Due to the strong space-filling property of fractals, the electrical current path along the zig-zag boundary is significantly extended and thus considerable reduction of resonant frequencies, namely compactness of the meta-atom can be envisioned. Most importantly, the fractal perturbation can readily introduce geometrical asymmetry due to the asymmetric fractal boundary. Therefore, the circular dichroism and optical activity can be achieved since there is no mirror symmetry, and the EM response of the normally incident wave with x polarization distinguishes from that with y polarization due to the lack of C4 symmetry. In this design, the substrate is chosen as the commonly available inexpensive F4B board with dielectric constant of εr = 2.65, thickness of h = 1 mm, and loss tangent of 0.001, while the metallic layers on both sides are copper sheet with thickness 36 μm. By periodically arranging the well-designed meta-atom with period constant p, a chiral slab with appealing circular behavior at desired frequencies can be engineered. To study the behavior of the chiral structure, we conduct numerical simulations using the Ansoft HFSS, a commercial full-wave finite-element-method (FEM) EM-field solver. In the simulation setup shown in Fig. 1(a), the periodical boundary condition (PBC) are adopted in the transverse xoy plane while two floquet ports are assigned on the top and bottom boundary along z direction. Figures 1(c) and 1(d) portray the photograph of the finally fabricated sample and its orientation with the incident wave. Under the Cartesian coordinate system, the intensity of transmitted waves E xt and E yt associates with that of incident waves E xi and E yi through four linear transmission components (the complex Jones matrix).  E xt   t xx t xy   E xi  (2)  t  =    i   E y   t yx t yy   E y  In the circular polarization basis, the RCP ( E+t ) and the LCP ( E-t ) transmitted components associate with the incident linear components as [13]  E+t  1  T+ x  t =  2  T- x  E- 

T+y   E xi  1  t xx +it yx  =  T-y   E yi  2  t xx -it yx

t xy +it yy   E xi    t xy -it yy   E yi 

(3)

where T+x, T-x, T+y, and T−y are four transformation coefficients in the circularly polarized basis under x-directed and y-directed polarization, respectively. Observation from Eq. (3) indicates that the CMM exhibits the capability of transforming an EM wave with linear polarization to a wave with circular polarization. As a circular polarizer, the difference (polarization extinct ratio) between the RCP wave and LCP wave should be large and the conversion efficiency should be engineered as high as possible. In the experiment, we fabricate the designed chiral structure composed of 35 × 35 unit cells and occupied an overall area of 231 × 231 mm2 through conventional printed circuit board


technology, and measure the transmission coefficients in microwave anechoic chamber. A pair of double-ridged broadband horn antennas with VSWR0°, otherwise it is left handed elliptical. Moreover, the simulated (measured) polarization azimuth rotation angles are found to be θ = −55.9° (−59.4°) and θ = 47.7° (50.5°) with respect to the incident linearly polarized wave when η = 0° at 9.06 GHz (9.15 GHz) and 11.29 GHz (11.48 GHz), respectively, revealing a giant optical activity. This also suggests that the transmitted wave is still linear polarization with rotation angle θ relative to the incident linearly polarized wave. In the case of y polarization, the value of η is 35.4° (23.9°), −21.6° (−22.94°) and 43.1° (40°) at 8.84 GHz (8.98 GHz), 9.87 GHz (9.89 GHz) and 11.78 GHz (11.86 GHz), respectively, and the rotation angles are observed as θ = −33° (−32.5°) and θ = 38.1° (30.9°) when η = 0° at 9.33 GHz (9.4 GHz) and 11.27 GHz (11.32 GHz), respectively.

η =arc tan

Fig. 5. Simulated and measured polarization azimuth rotation angle and ellipticity of the CMM for both (a) x polarization and (b) y polarization.


The physical origin of the triple-band resonances for the proposed CMM structure can be understood by examining the current and field distributions as shown in Fig. 6, where the phase of axial component of the local magnetic field is plotted in two planes cutting through the top and bottom Hilbert layer, and arrows denote the current directions. The longitudinal magnetic dipole to magnetic dipole coupling [11,12,23] formed in different localized regions accounts for the LCP and RCP resonances while the length of the effective current path is responsible for the operation frequency. As can be seen, there are obviously four small SRR with different orientations formed in the Hilbert structure. At 8.72 GHz, the currents in the upper two SRR of the top layer (enclosed by black dashed) are parallel (coherent) while in the bottom layer the induced currents are parallel in more than three quarters of region including the upper two SRR, enabling six magnetic dipoles with different strength of magnetic moments. The magnetic dipoles in lower two SRR of the bottom layer are not effectively excited due to the disordered (antiparallel) currents, and the weak magnetic moments in the lower two SRR give rise to the low conversion efficiency of the magnetic dipole to magnetic dipole coupling. At 9.77 GHz, seven magnetic dipoles are effectively shaped in corresponding SRR each with coherent current direction, and the currents in the right two SRR (enclosed by black dashed) of either top layer or bottom layer are parallel. The magnetic dipoles in these regions of top layer couple to those in the bottom layer. Moreover, the induced approximate half-region current path in the superposition region of the bilayer interprets the higher resonant frequency with respect to the fundamental resonance. The enhanced intensity of magnetic moments accounts for the moderate polarization transformation. At 11.84 GHz, two electric dipoles form in the diagonal of the top and bottom layer, respectively while six magnetic dipoles are excited in the residual region. The magnetic dipole to magnetic dipole coupling formed in the off-diagonal of the top and bottom layer (see the black dashed) dominates the residual magnetic (electric) dipole to electric (magnetic) dipole coupling and mainly contributes to the polarization conversion at the third frequency. The strongest intensity of the magnetic moments and the coherent current path on the order of three eighths of the entire Hilbert resonator in the superposition region of the bilayer gives rise to the best transformation efficiency and the highest operation frequency. The unique mechanism for the LCP and RCP wave due to the changed orientation of SRR distinguishes current design from any previously reported one.

Fig. 6. Axial component of the local magnetic field and surface current distribution of the Hilbert chiral structure in the case of x-polarized incident wave for the (a) right handed elliptical wave at 8.72 GHz, (b) LCP wave at 9.77GHz and (c) RCP wave at 11.84 GHz. Note that * denotes the position where the current direction changes. The top row is snapshot of the top pattern while the bottom row is that of the bottom pattern.


4. Controllability over resonances Finally, we perform two complementary parametric analyses for independent control over the resonances and chiral characteristics. Figure 7(a) depicts the effects of gap position on the polarization extinct ratio while Fig. 7(b) the effects of periodicity which correspond to the effects of element spacing. In both cases the residual geometrical parameters are kept constant as those shown in the caption of Fig. 1 and the results are obtained under the excitation of x-polarized EM wave. From Fig. 7(a), we learn that f2 undergoes continuously blue shifts when the gap of the top Hilbert SRR moves along the x axis from the end to the center in steps of 0.3mm, whereas f1 suffers slight blue shifts, and f3 is almost fixed. Therefore, the gap position along the x axis affords dependent control over f2. On the other hand when the gap alters to the center of the structure along the y axis, f1, f2 and f3 suffer from significant red shifts which can be employed for more compact designs. Despite this, the polarization purity deteriorates at f1 and f2 to some degrees. Most importantly, the transmitted RCP wave at f3 degenerates to a left-handed elliptical, and asymmetric transmission for linear polarization (txy≠tyx, txx = tyy) is obtained due to the breaking of the mirror symmetry of Hilbert SRR along the y axis. From Fig. 7 (b), the coupling between adjacent elements is significant when the Hilbert SRR is closely spaced and is negligible when the element spacing is sufficiently large. Therefore, all three resonant frequencies go upwards when p increases from 5.64 to 6.36 mm and then are almost constant no matter how p increases. A further inspection also indicates that the polarization extinction ratio deteriorates at f2, while improves to some degree at f3 as p goes up. As a consequence, a tradeoff between the LCP wave at f2 and RCP wave at f3 should be cautiously considered in the selection of the lattice constant.

Fig. 7. Control of the resonances and chiral characteristics through (a) the gap position and (b) element periodicity under the case of x-polarized illuminated EM wave.

5. Conclusions In summary, we have demonstrated numerically and experimentally that the twisted Hilbert SRR exhibits triple-band resonances and chiral characteristics. The formed localized magnetic or electric dipoles give rise to the distinguished resonances and polarization conversions. A properly designed dual-band circular polarizer has been demonstrated with high conversion efficiency and large polarization extinction ratio. An extra-noticeable advantage of the proposed structure is its planar compact size evaluated as λ0/6.83 × λ0/6.83 × λ0/34.4 at 8.72 GHz, which shows remarkable advantage in terms of miniaturization with respect to λ0/3.92 in [11] and λ0/1.83 in [12]. Moreover, the complicated element consists of only one resonator but possesses three resonant bands with respect to that incorporating two resonators with different geometrical parameters in [11] for dual-band operation. The element size would be more compact provided a substrate board with a higher dielectric constant is used, which should find promising applications when the polarizer needs to be integrated with other compact devices. Another advantage is the realization of the multifunctional CMMs which show high stability,


reliability and integrity. Most importantly, the CMM structure is not restricted to the low-frequency operation and can be scaled up to higher spectrum due to the geometrical scalability. Acknowledgments This work was supported in part by the National Natural Science Foundation of China under Grant Nos. 61372034, 60990320 and 60990324, in part by the foundation for Excellent Doctoral Dissertation of Air Force Engineering University under Grant No. KGD080913001, in part by the 111 Project under Grant No. 111-2-05, and in part by National High Tech (863) Projects under Grant Nos. 2011AA010202 and 2012AA030402.
