EOS 5D. BP-511A. BG-E4 direct fit. BGM-E2. EOS 5D Mk II. LP-E6. BG-E6 direct
fit. BGM- ... EOS 1000D. LP-E5 ... tion manual, nor in any Canon listing. If you do
...
Compatibility table Camera EOS 5D EOS 5D Mk II EOS 5D Mk III EOS 6D EOS 7D EOS 10D EOS 20D/20Da EOS 30D EOS 40D EOS 50D EOS 60D/60Da EOS 70D EOS 300D EOS 350D EOS 400D EOS 450D EOS 500D EOS 550D EOS 600D EOS 650D EOS 700D EOS 1000D EOS 1100D EOS M EOS D30 EOS D60
Battery magazine
Camera battery pack
Battery grip
BP-511A LP-E6 LP-E6 LP-E6 LP-E6 BP-511
BG-E4 BG-E6 BG-E11 BG-E13 BG-E7 BG-ED3
direct fit direct fit BGM-E11L BGM-E13L direct fit direct fit
BGM-E2 BGM-E6 BGM-E11A BGM-E13A BGM-E6 not available
BP-511A
BG-E2/N*
direct fit
BGM-E2
LP-E6 LP-E6 BP-511
BG-E9 BG-E14 BG-E1
BGM-E9L BGM-E14L direct fit
BGM-E9A BGM-E14A not available
NB-2LH
BG-E3
BGM-E3L
BGM-E3A
LP-E5
BG-E5
BGM-E5L
BGM-E5A
LP-E8
BG-E8
BGM-E8L
BGM-E8A
for one or two for six AA-size battery packs batteries
LP-E8 LP-E5 LP-E10 LP-E12
BG-E8 BGM-E8L BGM-E8A BG-E5 BGM-E5L BGM-E5A Canon battery grip not available (see notes) Canon battery grip not available
BP-511
BG-ED3
direct fit
AA batteries cannot be used
* The BG-E2 and BG-E2N are both compatible with the EOS 20D, 30D, 40D and 50D. The BG-E2N was introduced with the EOS 40D and adds a weatherproof seal to the battery compartment. Direct fit means that the battery packs are inserted into the battery grip without the need for a magazine tray.
Notes EOS 1D/1Ds series cameras The EOS professional models are not listed in the table above because they all have built-in battery grips, complete with a second set of controls for shooting in the portrait format. The cameras use a battery pack (Ni-MH or Lithium-ion, depending on model) which slides in from the side of the camera. Size AA batteries cannot be fitted. EOS 1100D There is a Battery Grip BG-E9, and a BG-E11, but no BG-E10. Logically, this would be the grip for the EOS 1100D, but there is no grip for this camera mentioned in the instruction manual, nor in any Canon listing. If you do an internet search for BG-E10 you will find quite a few compatible from third-party manufacturers, but so far we have not seen a genuine Canon BG-E10 grip. Our guess is that Canon feels there will be insufficient demand for a grip to fit this entry-level model, but has left its options open.
