Components and Systems for Instrumentation and Control

Components and Systems for Instrumentation and Control

RAFI:

Solutions with passi

CUSTOM CONTROL SYSTEMS for Instrumentation and Control Custom input systems ready for connection with electronics and a large number of interfaces. Multi-functional input systems with integrated control units such as membrane keyboards, touchscreens, joysticks and control components, in housings and combined with embedded control solutions from our standard range or developed according to customers’ requirements.

Control system for packaging machine with RAFIX 16 F control components and EtherCAT interface.

Mobile control unit with membrane keyboard for teaching robots, with 6D mouse, RAFI pushbuttons and RAFIX 16 Emergency-Stop.

Control unit GLASSCAPE with glass surface.

Control system RK 90 for CNC Training Center

Combination of membrane keyboard with RF 19 keys, integration of display, touchscreen and RAFIX 22 FS control components.

2

CUSTOM CONTROL SYSTEMS for Instrumentation and Control

Panel for printing machines. Flat data entry keyboard with RACON short-travel keys, display and RAFIX 22 FS Emergency-Stop on one common PCB.

Panels with keys and touchscreen for automation technology.

Control system for paper cutting machine

Optical thread sensor for detection of damage and quality control in textile machines.

3

INTELLIGENT CONTROL SYSTEMS for Instrumentation and Control

The RAFI SMART-Panel range is the basis for fast, cost-effective control and visualization tasks.

SMART-Touch with touchscreen.

The modular SMART-Panel system consists of various keyboard / touchscreen input units, which are connected to a 32-bit computer with a fan-less XScale processor. The WINDOWS CE operating system runs on this system. The interfaces ProfiBus, CANBus and Ethernet are offered as standard. All components of this range can be varied according to customers’ requirements. ECU, the SMART-Panel electronic unit.

Custom control system based on the RAFI SMART-Panel system, combined with control components.

4

SHORT-TRAVEL KEYS for Instrumentation and Control

RAFI supplies high quality electromechanical components for automation technology.

RF 15/19 and KN 19 combined with RAFIX 22 FS contact blocks.

Short-travel keys MICON 5, RACON 8/12, RF 15/19 and main switch KN 19 in control systems under overlay or keycap. Absolute reliability with optimum tactile response.

Short-travel key RACON with plunger in flat data entry keyboard. Keycaps RK 90 over RACON short-travel

MICON under overlay and under keycaps.

5

CONTROL COMPONENTS for Instrumentation and Control

Robust control and signal components for all areas of application. RAFIX 16 with 16 mm mounting hole diameter, RAFIX 22 FS with extremely low mounting depth or RAFIX 22 QR for large currents.

Emergency-Stop buttons from the ranges RAFIX 22 QR, RAFIX 16, LUMOTAST 25 and RAFIX 22 FS.

Control components RAFIX 22 FS Robust control components with mounting depth of only 9.2 mm with PCB connection, or 27 mm for plug-in connection, provide functional, elegant panels.

RAFIX 22 QR with AS-interface contact blocks.

RAFIX 22 FS E-Box. The compact EmergencyStop unit. RAFIX 22 FS in terminal of industrial PC.

6

RAFI Company Profile

RAFI in Berg/Ravensburg

Solutions with Passion Solutions for automation technology have always been a special challenge for development, production and quality assurance. We have faced up to these challenges with a passion and have been producing electro-mechanical and electronic products for automation technology at our national and international locations

since the end of the 1980s. Our great success in this market segment led to the establishment of an independent sales division. In this way we can dedicate ourselves more intensively to producing solutions for our customers.

Certificates

Mechanical production



DIN ISO 9001:2000 (DQS)



Contact technology



ISO/TS 16949:2002 (DQS)



Plastic injection moulding



Metalworking

Research



Screen printing



Advanced engineering



Pad printing



Material testing



Manual, semi- and fully-automatic assembly

Electronic development

Circuit development

Electronic production



Component selection



PCB design



Manual and automatic assembly of SMD and THT components



Software development



Soldering (reflow, wave, vapour phase and selective soldering)



Automatic functional tests (ICT, AOI)

Design

3D design



2D design



Tool and operating materials design

7

RAFI:

11/2009

Solutions with passi

RAFI GmbH & Co. KG P.O. Box 2060, 88190 Ravensburg, Germany Tel.: + 49 (0)751/89-0, Fax +49 (0)751/89-1300 www.rafi.de, [email protected]