Continental VDO Event and Fault Codes

Continental VDO Event and Fault Codes Pictogram

Error Text

Memory Code

àÕ

Internal Fault

àÕ àÕ àÕ àÕ àÕ àÕ àÒ àÐ

Internal Fault Internal Fault Time Fault Internal Fault Calibration Fault Internal Fault Internal Fault Download Fault

01 02 03 04 05 06 08 09 10 11 12

àÕ àÕ àÕ

Internal Fault Internal Fault Internal Fault

13 14 15

àÓ Þæ Þæ ÞÑ ÞÓ ÞÓ ÞÓ Þæ Þæ Þæ Þæ Þæ Þ¿Í

16 17 18 19 20 21 22 23 24 25 26 27 28

ÞÍÍ çç

Sensor Fault Security Breach Security Breach Power Interruption Sensor Fault Sensor Fault Sensor Fault Security Breach Security Breach Security Breach Security Breach Security Breach Driving Without Card Cards Conflict Overspeed

ÞÑ

Power Interruption

­­­ ïÍ ïÍè ïÒ

­­­ Ejection not Possible Process Delayed Printout not Possible

31 32 33 34 35 36

ïÒ

Printout Delayed

37

ïÒ ïÒ àÕË àÍË

Drawer Open No Paper Internal Fault Card Fault

38 39 40 41

29 30

Meaning A serious fault has appeared in the device or a communication fault

A serious fault has occurred in the device Communication fault Time error Keypad error Calibration memory error v-pulse output (B7) fault Printer fault A communication error has occurred while downloading card or mass memory CAN, internal error CAN fault, bus off CAN, communication error between recording unit and external display instrument Internal sensor fault Fault in sensor data authentication Error in sensor authentication Sensor power interruption Error in sensor communication Error in sensor communication – no real time signal Error in sensor communication Sensor authentication error Unknown sensor serial no. Error in data memory Housing of recording unit opened Invalid signals at calibration interface Driving without a valid card in slot 1 or driving with an invalid card combination in card slots 1 and 2 Invalid card combination in card slots 1 and 2 The programmed overspeed setting was exceeded for longer than 60 secs Recording unit power interruption Calibration error Motion sensor impulse when ignition is switched off A card cannot be ejected (i.e. whilst driving) Card processing delayed Printout not possible due to no ignition, driving, temperature rise or low/high voltage Printout delayed or cancelled due to temperature rise or under/overvoltage Printer drawer open No paper in the printer Card mechanical system fault Card communication error

01376 552999 www.novadata.co.uk

ÞæË ÞæË ÞÍÕË ÞÎÎË ÞÍ¿Ë ÞæË ÞÍË ïÍÊË ïÍË ïÍË ïÍËà ïÕ ï¿Ë ï¿Ë ï¿Ì ï¿Ì àÕÌ àÍÌ ÞæÌ ÞæÌ ÞÍÕÌ ÞÎÎÌ ÞÍ¿Ì ÞæÌ ÞÍÌ ïÍÊÌ ïÍÌ ïÍÌ ïÍÌà ïÕ ­­­ ­­­ ­­­ ­­­

Security Breach Security Breach Card not Closed Time Overlap Insertion while Driving Security Breach Card not Valid Recording Inconsistent Card Error Wrong Card Type Card Locked Internal Fault Break! 1¿4h30 É00h15 Break! 1¿4h15 É00h15 Break! 2¿4h30 É00h15 Break! 2¿4h15 É00h15 Internal Fault Card Fault Security Breach Security Breach Card not Closed Time Overlap Insertion While Driving Security Breach Card not Valid Recording Inconsistent Card Error Wrong Card Type Card Locked Internal Fault Upgrade Module not Present Upgrade Failed Error #00000003 Upgrade Failed Error #00000001 Upgrade Failed Error #00000002

42 43 44 45 46

Authenticity of card data can not be ensured Card exchanged, missing or interlock open Last card session was not closed correctly Negative time difference compared to the last vehicle The driver card was inserted whilst driving

47 48

50 51 52 53 56

Authenticity of card failed The card has either expired, is not yet valid or the authentication has failed While reading in a card (in slot 1), an inconsistency is found in the links within the data The inserted card (in card slot 1) cannot be read or written to. The card inserted is not a valid tachograph card The inserted Workshop Card (in slot 1) is Blocked Process not possible, tachograph card is not accepted and is ejected Continuous driving period of 4 hours 30mins Exceeded – Slot 1

57

Continuous driving period of 4 hours 15mins Exceeded – Slot 1

74

Continuous driving period of 4 hours 30mins Exceeded – Slot 2

75

Continuous driving period of 4 hours 15mins Exceeded – Slot 2

58 59 60 61 62 63 64

Card mechanical system fault – Slot 2 Card communication error – Slot 2 Authenticity of card data can not be ensured – Slot 2 Card exchanged, missing or interlock open – Slot 2 Last card session was not closed correctly – Slot 2 Negative time difference compared to the last vehicle – Slot 2 The driver card was inserted whilst driving – Slot 2

65 66

Authenticity of card failed – Slot 2 The card has either expired, is not yet valid or the authentication has failed – Slot 2 While reading in a card (in slot 2), an inconsistency is found in the links within the data

49

67 68 69 70 71 75 78 79 79

The inserted card (in card slot 2) cannot be read or written to. The card inserted is not a valid tachograph card – Slot 2 The inserted Workshop Card (in slot 2) is Blocked Process not possible, tachograph card is not accepted and is ejected – Slot 2 The DTCO 1381 is not fitted with a software Upgrade The upgrade file is defective or damaged. The software upgrade has been cancelled During the software upgrade the DTCO 1381's power supply was outside the specified range. The software upgrade has been cancelled The management device could not be authenticated. The software upgrade has been cancelled.

01376 552999 www.novadata.co.uk