Contour. Page 2. File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC.
Page 2 of 8. Created by Ole Kristensen. Created on 10/20/2003. 9:24:00 AM.
Contour 7.6.8 Install guide
Contour
Page 2
Introduction This document describes how to install the latest Contour version and patch.
Contents Contour ......................................................................................................................................1 7.6...............................................................................................................................................1 Install guide................................................................................................................................1 Revision table.............................................................................................................................2 1 Install from CD ..................................................................................................................2 1.1 Dongle........................................................................................................................5 2 Patches ...............................................................................................................................6 3 Documentation...................................................................................................................7 4 The program.......................................................................................................................8
Revision table Date 20.10.2003 15.10.2004 02.11.2004 03.05.2006
Who OKR JUS OKR JUS
Comment Document created Revised New dump – CD Install Release 7.6.8
1 Install from CD To install the latest version of Contour, then insert the CD in your drive and an auto-run window pops up.
File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 2 of 8 Created on 10/20/2003
Contour
Page 3
If not, then start the program D:\Installer.exe manually – where D:\ is your CD-ROM drive. The window includes a button for Contour, e.g. “Contour 7.6.8”. Press it and follow the instructions. If a small patch exists, then an additional button is found right to the install button. This has to be installed after the real installation. As default it suggests that you install into C:\EIVA\CONTOUR:
File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 3 of 8 Created on 10/20/2003
Contour
Page 4
If you want it differently, then press Browse and select a new folder.
Select “Typical” installation. After installation, the programs are copied to the selected drive and catalogue:
File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 4 of 8 Created on 10/20/2003
Contour
• • • •
Page 5
\EIVA\Contour\bin: Includes all executables and DLL’s. \EIVA\Contour\Demo data Gives a series of sample data for DTM’s and calibration \EIVA\Contour\Manuals Includes release notes, manual and a small power point lecture. \EIVA\Contour\Setup Dedicated setup file(s) used by the program
1.1 Dongle Beside the program, you must also install support for Wibu-key (the small green dongle placed on the parallel or USB port). This must also be done in demonstration mode, as it requires driver no matter if the dongle is there or not. Installation is initiated from the main start-up window Dongle button.
And then just follow the instructions. File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 5 of 8 Created on 10/20/2003
Contour
Page 6
2 Patches Very often the CD’s also includes a patch – where a patch can be a single file or a minor installation program. The patches have to be found and installed manually. They are always located at the CD at D:\Contour\Version7.4.8\Patch – where the Versionx.y.z is the most recent one.
In the above sample you have to install the patch Contour749.exe as described in the small description file: EIVA a/s 15.10.2004 Contour 7.4.9 - patch to official release 7.4.8 --------------------------------------------------------------------Extract the contents of the zip file to \eiva\contour\bin directory. This enables: * Compatible with NE DB 7.0.x
At a later stage, you may add patches from newer CD’s or you may pick them up from our download home page: http://download.eiva.dk/downloads/default.asp
File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 6 of 8 Created on 10/20/2003
Contour
Page 7
3 Documentation The manual for Contour is installed on your drives (\eiva\contour\manuals\Contour7_4.doc) as a Word document. If you have problems reading the Word format, then contact EIVA (
[email protected]) to get RTF or PDF version instead.
File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 7 of 8 Created on 10/20/2003
Contour
Page 8
4 The program After installation the Contour program is added to the Windows Start Menu:
File: C:\EIVA\CONTOUR\MANUALS\CONTOUR INSTALL.DOC Created by Ole Kristensen 9:24:00 AM
Page 8 of 8 Created on 10/20/2003