and qualified ''Control and Automation Technicians'' in control and ... intermediate
persons who are able to control the ... e-mail:
I. THE PURPOSE OF THE PROGRAM
III. WORKING AREAS OF THE GRADUATES
The main purpose of the program is to educate needed
After being educated in vocational courses, our
and qualified ''Control and Automation Technicians'' in
graduates may work in the fields of public and private
control and automation technologies. By educating
sectors, technical services, maintenance-reparation
intermediate persons who are able to control the
units, electric-electronic and mechanic montage and
industrial process and who can use the current
demontage tasks, programming microcontrollers,
production technologies actively. It is aimed to improve
electric-electronic and machine manufacturing factories, control and remote control systems, PLC
the human sources of our country in this field and to
programming, Pneumatic- Hydraulic Systems and
support regional and national development.
robotics, and they may establish their own business.
The program lasts two years. During the first year, it is the aim that the students are provided with basic electric, electronic, mechanic, and computer skills. In
II. TECHNICAL BACKGROUND AND
the second year, the students are skilled and informed about mechanic, montage-maintenance- reparation of electric and electronic equipments, measuring and controlling the variables of level, pressure, heat, flow, humidity and Ph, the application of PLC systems in automation, the remote and in-place control of the process, the applications of different types of microcontroller used in process controlling and the application fields of pneumatic and hydraulic power systems.
LABORATORIES The program, which started its education and teaching activities in 1994-1995, has 3 computer an laboratories with 30 computers, overhead projector and a smart board, 1 language laboratory and 30 classrooms. Moreover, there is a Communication Technologies Laboratory, an Electronic Technologies Laboratory, a PLC and SCADA Laboratory, a Mechanics and Motor Laboratory, an Electric Machines Laboratory, a Control and Automation Technologies Laboratory, an
IV. THE VERTICAL TRANSFER FIELDS THAT GRADUATES MAY APPLY TO
Electric Measurement and Power Systems Laboratory, and a Printed Circuit Laboratory. All classrooms have computer and overhead projectors. There is equipment
·
Industrial Engineering
·
Electrical Engineering
·
Electronics Engineering
such as machine tools, automatic remote controls, PLC,
·
Electronics and Communication Engineering
SCADA, pneumatic systems, hydraulic systems,
·
Control Engineering
measurement information, electric machines and
·
Mechanical Engineering
·
Mechatronics Engineering
·
Aeronautics Engineering
·
Aero Electric-Electronic
drivers for electric and electronic applications in sufficient number.
N
I
V
2006
A I
VOCATIONAL SCHOOL OF TECHNICAL SCIENCES V
M
T
2006
Y
A
IV. REQUIREMENTS TO BE ABLE TO GRADUATE
I
A
S
S
R
Y
E
A
N
Y
U
T
M
I
A
S
S
R
Y
E
A
U
ELECTRONICS AND AUTOMATION DEPARTMENT
FROM THE PROGRAM The students who register for the Control and
CONTROL AND AUTOMATION TECHNOLOGY PROGRAM
Automation Technology Program should take at least 120 AKTS credits with a 20-day training at the end of
CONTACT INFORMATION
the 2nd and 4th semesters, in total a 40-day summer training based on practice in order to graduate from this department.
Amasya University Vocational School Of Technical Sciences 05186/ Amasya Phone: +90 358 2525212-13 Fax: +90 358 2525217 www.amasya.edu.tr e-mail:
[email protected] facebook/atbmyo Twitter/atbmyo
''The Address of Quality in Vocational Education'’
Press and Public Relations Directorship 2013