MGI's PunchCard Pro is a stand-alone, hydraulic finishing unit for paper or ...
Format. 330 mm x 487 mm/13” x 19”. Consumable Films. Clear PVC or PET
Overlay ...
Data Sheet - PressCard Pro/Punch Card Pro
Industrial Lamination Unit for Paper & Plastic The PressCard Pro is an industrial lamination unit for paper and plastic substrates, including PVC, polycarbonate, vinyl and synthetic papers. The unique technologies integrated into the unit include individual heating, cooling and pressure control circuits. The PressCard Pro can manufacture plastic cards (ISO CR-80) from 100 up to 850 microns (4 mil up to 34 mil), RFID, labels, signage and many other applications, including clear PVC overlay with embedded magnetic stripes. This compact and industrial hot lamination press is fully automated and operates on an average 25 minute cycle.
Stand-Alone Finishing Unit for Paper & Plastics MGI’s PunchCard Pro is a stand-alone, hydraulic finishing unit for paper or plastic cards. Each sheet can be cut into 21 or 24 ISO CR-80 cards (85.5 mm x 54 mm), with rounded corners and a maximum thickness of 0.85 mm/34 mil/850 microns. Crop marks are read using integrated fiber optics, which ensures precision die cutting. Cards are automatically retrieved via 3 chimney stackers (3 x 180 cards).
Innovation in Motion
Technical Specifications
Process
Substrate Format
Speed
Card Thickness
Standard lamination is achieved using 2 PVC sheets (or any other synthetic substrate) and with/without a spacer (heat activated core), through a single stack heat/water cooled process. Lamination could be obtained in matt or in glossy finish.
Min width: 300 mm/11.8”. Max: 330 mm/13”. Min length: 190 mm/7.5”. Max: 487 mm/19”.
2,000 ISO cards per hour 760 μ. 90 sheets 760 μ 13’’ x 19’’ (330 mm x 487 mm). 2,800 ISO cards per hour 300 μ. 135 sheets 300 μ 13’’x 19’’ (330 mm x 487 mm).
21 to 24-up (ISO CR-80). Template 330 x 487 mm/13” x 19” sheet. PVC, Polyester and Paper from 100 up to 850 μ/4 mil up to 34 mil.
Die Cutting Format (ISO CR-80)
Format
85.5 x 54 mm/3.36” x 2.12” - ISO Format.
330 mm x 487 mm/13” x 19”.
Collection Stacker For Cut Out Cards
Consumable Films
Clear PVC or PET Overlay, Polishgard Spacer for Split Core stainless lamination plates and pads.
3 drawers of 10 stainless steel plates each for a total of 30 sandwiches (760 to 850 μ - 34 mil).
Templates for ISO CR-80
21 to 24-up layout of standard ISO cards on a 330 mm x 487 mm/ 13’’x19’’ sheet.
Maximum Pressure
Power Supply
110 V/60 Hz - 230 V/50 Hz.
Electrical Consumption 1.8 kW.
Dimensions (W x D x H)
Max. hydraulic pressure 120 bars.
780 x 670 x 1180 mm. 30.7” x 26.4” x 46.5”.
3 phases of 400 Volts at 30 A, nearly 4 kW / cycle.
Dimensions (W x D x H)
Cutting Speed
Up to 8,500 ISO cards/hour.
Loading
Power
3 chimney stackers capacity of 180 cards each (total 540).
Weight
± 210 kg (463 lbs).
950 x 800.2 x 1610 mm. 37.4” x 31.5” x 63.4”.
Weight
± 1,200 kg (2,646 lbs).
All the other trademarks cited are marks registered by their respective manufacturers. Operator / end-users are invited to submit substrates to MGI for validation.
Digitally printed using the MGI Meteor DP8700 XL.
0845 388 6448
www.mgitechnology.co.uk Maylands Business Centre, Redbourn Road, Hemel Hempstead HP2 7ES