Daybed >>>assembly instructions - Dorel Asia | Home

6 downloads 97 Views 1MB Size Report
notes. 13. QUESTIONS? Just call 1-800-295-1980. For faster service, have the style number and DPCI number ready ... Note: Keep Allen Key (H5) for future use.
Nolan Daybed style# TG3610 dpci# 242-18-6386

>>>assembly instructions

Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your room in no time. Good luck-though we're confident you won't need it.

before you begin 1. Check for damaged or missing parts. Please call 1-800-295-1980 for parts and service. Please reference DPCI # 242-18-6386 or model number TG3610. 2. Use the carton as a working surface to prevent product damage during assembly. 3. Gather all tools prior to assembly.

tools needed

2

table of contents

…………………………………..…………………………………………………………….. introduction

2

hardware

4

parts list

5

assembly notes

6-12 13

QUESTIONS? Just call 1-800-295-1980. For faster service, have the style number and DPCI number ready when calling. 3

hardware

………………………………………………………………………………………………………………………………………………. (H1) x 8

(H2) x 2

(H3) x 2

bolt

bolt

spring washer

Ø 5/16" x 20mmL

Ø 5/16" x 55mmL

Ø 12.5mm

(H4) x 10

(H5) x 1

(H6) x 12

flat washer

allen key

screw

Ø 19mm

Ø 5mm

Ø 4mm x 30mmL

4

ITEM DESCRIPTION QUANTITY ………………………………………………………………………………………………………………………………………………. A B C D E F G H I J

5

back left side frame right side frame front rail left metal bracket right metal bracket slat rack support leg plastic plate wood foot

1 1 1 1 1 1 1 3 4 4

Step 1

……………………………………………………………………………………………………………………………………………….

1.) Slide back (A) to side frames (B & C) by inserting the metal brackets on back (A) into the metal glides on side frames (B & C). 6

Step 2

……………………………………………………………………………………………………………………………………………….

……………………………………………… (H1) x 4

(H4) x 4

bolt Ø 5/16" x 20mmL

flat washer Ø 19mm

(H5) x 1 Allen Key Ø 5mm

1). Attach metal brackets (E & F) to front rail (D) with bolts (H1) and flat washers (H4). Use allen Key (H5) to tighten bolts. 2). Attach the assembled front rail (D) to the side frames (B & C). Note: Keep Allen Key (H5) for future use. 7

Step 3

……………………………………………………………………………………………………………………………………………….

……………………………………………… (H1) x 4

(H4) x 4

bolt Ø 5/16" x 20mmL

flat washer Ø 19mm

(H5) x 1 Allen Key Ø 5mm

1). Secure front rail (D) and side frames (B & C) with bolts (H1) and flat washers (H4). Use Allen Key (H5) to tighten the bolts. Note: Keep Allen Key (H5) for future use. 8

Step 4

……………………………………………………………………………………………………………………………………………….

……………………………………………… (H2) x 2 bolt Ø 5/16" x 55mmL

(H3) x 2

(H4) x 2

spring washer Ø 12.5mm

flat washer Ø 19mm

(H5) x 1 Allen Key Ø 5mm

1). With the help of another person, lay the unit on a clean smooth surface as shown above. 2). Secure back (A) and side frames (B & C) with bolts (H2), spring washers (H3) and flat washers (H4). Use Allen Key (H5) to tighten all bolts. 9

Step 5 ……………………………………………………………………………………………………………………………………………….

1). Attach wood feet (J) and plastic plates (I) to side frames (B & C) by rotating clockwise. 2). With the help of another person, turn the daybed in the upright postion on its feet.

10

Step 6 ……………………………………………………………………………………………………………………………………………….

1). Attach support legs (H) to the slats with the pre-mounted nuts on slat rack (G) by rotating clockwise.

11

Step 7 ……………………………………………………………………………………………………………………………………………….

………………………… (H6) x 12 screw Ø 4mm x 30mmL

1st slat

16th slat

1). Lay slat rack (G) on the wood frame of back (A) and front rail (D). Make sure the first and last slat on slat rack (G) are placed outside the wooden blocks on back (A) and front rail (D). 2). Starting from the left side, secure the 1st, 4th, 7th, 10th, 13th and 16th slats on slat rack (G) with screws (H6). Use a Phillips head screw driver (not included) to tighten screws. 12

Notes ……………………………………………………………………………………………………………………………………………….

Use with a coil spring mattress only; minimum thickness of 8". 13

© 2008 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.