Index Door lock and transponder interface for many old model Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, Pontiac and Saturn vehicles. Features include RAP ...
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide Door lock and transponder interface for many old model Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, Pontiac and Saturn vehicles. Features include RAP shutdown, door trigger sensing and tach output.
WARNING: Door lock function may not operate on older vehicles that do not have the OnStar feature (active or not).
Index Vehicle Application Guide................................................................................................................................................ 02 Installation Type 1.............................................................................................................................................................................. Vehicle Wiring Reference Chart - Type 1......................................................................................................................... Type 2.............................................................................................................................................................................. Vehicle Wiring Reference Chart - Type 2......................................................................................................................... Type 3.............................................................................................................................................................................. Vehicle Wiring Reference Chart - Type 3......................................................................................................................... Type 4.............................................................................................................................................................................. Vehicle Wiring Reference Chart - Type 4.........................................................................................................................
04 05 06 07 08 09 10 11
Programming Programming - Type 1..................................................................................................................................................... Programming - Types 2 & 4............................................................................................................................................. Programming - Type 3..................................................................................................................................................... Module Reset................................................................................................................................................................... Hard Reset....................................................................................................................................................................... Feature & Option List....................................................................................................................................................... Feature Programming......................................................................................................................................................
13 14 15 16 16 17 18 19
LED Diagnostics & Troubleshooting................................................................................................................................ 21 Limited One-Year Consumer Warranty............................................................................................................................ 22 Quick Reference Guide................................................................................................................................................... 22
® Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, Pontiac and Saturn are registered trademarks and property of their respective companies.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 2
Vehicle Application Guide
3 1
1
1
1
1
3
3
3
1
1
1
Cadillac Escalade Chevrolet Astro Avalanche Blazer Cavalier Colorado Equinox Express Van Impala Malibu Malibu Classic Monte Carlo S10 Pickup Silverado Suburban Tahoe Uplander Venture GMC Canyon Envoy Jimmy Safari Savana Sierra Sonoma Suburban Yukon
4
4
4
2
2
2
1
2
2
2
2
2
1
2
2
1
2
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Trunk/Hatch Pin
•
•
RS-Tach / RPM Output
•
•
RS-SmartStart
•
•
FOB-Control of aftermarket alarm with OEM remote
•
•
DL-Trunk / Hatch Release
•
DL-Sliding Door Control Passenger
D
•
•
D
D
•
•
D
•
D
•
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
•
D
D
•
•
•
•
4
4
4
•
D
•
•
•
•
•
•
•
D
•
•
•
•
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
D
D
•
•
D
4
2
•
DL-Sliding Door Control Driver
3
DL-Driver Priority Unlock
3
DL-Door Unlock
3
DL-Door Lock Control
3
DL-Disarm Factory Security
3
DL-Arm Factory Security
3
AV-Panic Mode Activation
3
1998
3
1999
1
2000
1
2001
2005
1
2002
2006
1
2003
2007
1
2004
2008
Buick Allure Century LaCrosse Rendezvous Terraza
2009
2010
2011
2012
Vehicles
PK-Immobilizer Bypass-Data No Key Req'd
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year allows you to determine which installation type should be used for your vehicle.
4
4
4
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
2
2
2
•
D
•
•
•
•
•
D
D
•
•
D
4
4
1
2
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
3
3
3
3
•
•
•
•
•
•
•
D
•
4
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
•
•
•
•
•
D
•
3
3
4
4
3
3
3
3
3
3
•
4
4
4
4
4
•
D
•
•
•
•
•
D
D
•
•
D
4
4
4
•
D
•
•
•
•
•
D
D
•
•
D
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
•
•
•
D
D
•
•
D
•
•
•
•
•
•
•
•
D
D
•
4
4
1 1
1
2
2
1
1
•
1
1
•
D
•
•
•
•
•
D
D
•
•
D
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4
•
D
•
•
•
•
•
D
D
•
•
D
4
4
4
•
D
•
•
•
•
•
D
D
•
•
D
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
4 4
4
4
4
Legend: AV: Horn & Lights Controls DL: OE Door Lock & Alarm Controls FOB: Sync CAN Interface w/ FOB Remote PK: Transponder & Immobilizer Override RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 3
Vehicle Application Guide (continued)
4
1
Saturn ION Relay Sedan Coupe S-Series VUE
1
1
1
4
4
FOB-Control of aftermarket alarm with OEM remote
RS-SmartStart
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Trunk/Hatch Pin
•
•
D
D
•
•
D
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
D
•
•
•
D
•
DL-Sliding Door Control Passenger
D
•
•
•
DL-Sliding Door Control Driver
•
DL-Driver Priority Unlock
1998
1999
•
•
•
•
•
•
•
D
D
•
•
•
•
•
D
D
•
4
4
4
•
D
•
•
•
•
•
D
D
•
1
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
•
•
•
•
D
•
•
•
•
•
D
•
•
•
•
D
•
•
•
•
D
•
•
•
D
•
•
•
D
•
•
D
•
3
3
1
1
1
1
4
4
4
4
4
4
4
4
4
4
2
2
1
4
D
•
•
•
3
4
D
•
D
•
1
4
•
D
•
•
4 4
D
•
•
•
4
4
D
•
•
D
3
1
•
•
•
•
1
2
•
D
•
•
3
1
D
D
•
4
1
2
D
•
•
4
1
1
•
D
4
1
2
•
•
4
1
4
D
DL-Door Unlock
2
•
DL-Door Lock Control
2
•
DL-Disarm Factory Security
2
D
DL-Arm Factory Security
2
D
AV-Panic Mode Activation
2
•
PK-Immobilizer Bypass-Data No Key Req'd
4 2
Oldsmobile Alero Bravada Intrigue Silhouette Pontiac Aztek Montana Montana SV6 Sunfire Torrent Trans Sport
2000
2
2001
2006
2
2002
2007
2
2003
2008
2
2004
2009
2
Isuzu Hombre i-280 i-290 i-350 i-370
2005
2010
Hummer H3
2011
2012
Vehicles
DL-Trunk / Hatch Release
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year allows you to determine which installation type should be used for your vehicle.
4
•
•
•
D
D
•
•
•
•
•
D
D
•
•
•
•
•
•
D
D
•
•
•
•
D
D
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D
D
•
•
•
•
D
D
•
D
D
•
•
•
•
D
D
•
D •
D
•
•
D
•
•
•
D
•
•
D
•
•
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
4
4
•
D
•
•
•
•
•
•
D
D
•
•
D
•
•
D
•
•
•
•
•
•
D
D
•
•
D
•
Legend: AV: Horn & Lights Controls DL: OE Door Lock & Alarm Controls FOB: Sync CAN Interface w/ FOB Remote PK: Transponder & Immobilizer Override RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 4
Installation Type 1 Refer to page 5 for the corresponding Vehicle Wiring Reference Chart.
[2] (AC)
Tach Input
(-) Trunk Status Input
(+) 12V Input
Remote
(-) E-Brake Status Input
(-) Hood Switch
Starter
(+) Accessory 1 Output (+) Accessory 2 Output (if required) (+) Brake Input (+/-) Parking Lights Output (+) Ignition 2 Output
(-) Door Status Input
(-) Ground
(-) Lock Output (-) Unlock Output (-) Rear Hatch or Trunk Release Output [1] (-) AUX1 Right Sliding Door Output (-) AUX2 Left Sliding Door Output (+) Starter Output (+) Ignition Output (-) GWR (Status)
J1850: Violet, pin 2 1
8
9
16
Diagnostic connector OBDII (connector side view)
J1850: Violet/Yellow: 2 (+) 12V: Red: 13
(-) Ground
14
(+) 12V
(-) Ground: Black: 14
10: Blue/White: (-) GWR (Status) Input 9: Pink: (+) Ignition Input
(-) Door Status Output: Green/White: 3
8: Violet: (+) Starter Input
(-) Trunk Status Output: Red/Black: 4
10
Tach Output: Violet/White: 5
12
[2] (AC)
Keyless Data: Yellow/Black: 10 (-) E-brake Status Output: Orange/Black: 11
2: Blue: (-) Unlock Input 1: Green: (-) Lock Input
2
40
4: White/Violet: (-) AUX1 Right Sliding Door Input 3: Red/White: (-) Rear Hatch or Trunk Release Input [1]
Keyless Data: pin 37
31
5: Violet/Black: (-) AUX2 Left Sliding Door Input
RF
49
52
LED
DBALL/ DBALL2
4
Prog. button
(+)12V RX (-) Ground TX
P#: XKD2D65
21 11 44
1
10
41
If no wire is found in pin 37, insert one to enable connection.
Connector 1 at BCM (connector side view) BCM is located at the left of steering column. Exception: 2000-05 Pontiac Montana, 2000-05 Chevrolet Venture, and 2000-04 Oldsmobile Silhouette: located behind glove box at BCM-C2, 32-pin conn., Black/White, pin C8.
Not required in D2D mode. [1] Rear
Hatch or Trunk Release Input: On vehicle with a motorized rear hatch, this input will release the hatch. See programming options to change its operation.
[2] Tach
wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 5
Vehicle Wiring Reference Chart - Type 1 (+)12V, Ignition 1 & 2, Starter, Keyless Data Vehicles Buick Allure LaCrosse Terraza Chevrolet Uplander Venture Oldsmobile Silhouette Pontiac Montana Montana SV6 Saturn Relay
Years
(+) 12V
Ignition 1
Ignition 2
Starter
Keyless Data
2005-09 BCM-C1, Orange, pin 46 BCM-C1, Pink, pin 22 N/A 2005-09 BCM-C1, Orange, pin 46 BCM-C1, Pink, pin 22 N/A 2005-07 BCM-C1, Red/White, pin 51 BCM-C1, Pink, pin 22 N/A
BCM-C1, Yellow, pin 21 BCM-C1, Yellow, pin 21 BCM-C1, Yellow, pin 21
BCM-C1, pin 37 BCM-C1, pin 37 BCM-C1, pin 37
2005-09 BCM-C1, Red/White, pin 51 BCM-C1, Pink, pin 22 N/A 2000-05 Ignition Switch, Red Ignition Switch, Pink Ignition Switch, White
BCM-C1, Yellow, pin 21 Ignition Switch, Yellow
BCM-C1, pin 37 BCM-C2, Black/White, pin C8
2000-04 Ignition Switch, Red
Ignition Switch, Yellow
BCM-C2, Black/White, pin C8
2000-05 Ignition Switch, Red Ignition Switch, Pink Ignition Switch, White 2005-09 BCM-C1, Red/White, pin 51 BCM-C1, Pink, pin 22 N/A
Ignition Switch, Yellow BCM-C1, Yellow, pin 21
BCM-C2, Black/White, pin C8 BCM-C1, pin 37
2005-09 BCM-C1, Red/White, pin 51 BCM-C1, Pink, pin 22 N/A
BCM-C1, Yellow, pin 21
BCM-C1, pin 37
Ignition Switch, Pink
Ignition Switch, White
Accessory 1 & 2, Brake, Parking Lights, J1850 Vehicles Buick Allure LaCrosse Terraza Chevrolet Uplander Venture Oldsmobile Silhouette Pontiac Montana Montana SV6 Saturn Relay
Years
Accessory 1
Accessory 2
Brake
Parking Lights
J1850
2005-09 BCM-C1, Brown, pin 23 2005-09 BCM-C1, Brown, pin 23 2005-07 BCM-C1, Brown, pin 23
N/A N/A N/A
BCM-C2, White, pin 30 BCM-C3, Brown/White, pin 8 (-) OBDII, Violet, pin 2 BCM-C2, White, pin 30 BCM-C3, Brown/White, pin 8 (-) OBDII, Violet, pin 2 BCM-C1, Lt. Green, pin 39 BCM-C3, Brown/White, pin 8 (-) OBDII, Violet, pin 2
2005-09 BCM-C1, Brown, pin 23 2000-05 Ignition Switch, Orange
N/A BCM-C1, Lt. Green, pin 39 BCM-C3, Brown/White, pin 8 (-) OBDII, Violet, pin 2 Ignition Switch, Brown Brake Switch, White Driver Kick Panel, Brown (+) OBDII, Violet, pin 2
2000-04 Ignition Switch, Orange
Ignition Switch, Brown Brake Switch, White
2000-05 Ignition Switch, Orange 2005-09 BCM-C1, Brown, pin 23
Ignition Switch, Brown Brake Switch, White Driver Kick Panel, Brown (+) OBDII, Violet, pin 2 N/A BCM-C1, Lt. Green, pin 39 BCM-C3, Brown/White, pin 8 (-) OBDII, Violet, pin 2
2005-09 BCM-C1, Brown, pin 23
N/A
Driver Kick Panel, Brown (+)
OBDII, Violet, pin 2
BCM-C1, Lt. Green, pin 39 BCM-C3, Brown/White, pin 8 (-) OBDII, Violet, pin 2
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 6
Installation Type 2 Refer to page 7 for the corresponding Vehicle Wiring Reference Chart. (-) Hood Switch (+) Brake Input
(+) Parking Lights Output (+) 12V Input
Tach Input
[2] (-)
Door Status Input (+) Ignition Output
Remote
[1] (AC)
(-) Trunk Status Input
Starter
(-) E-Brake Status Input
(-) Ground
(-) Lock Output (-) Unlock Output (+) Starter Output (+) Ignition Output
(+) Accessory Output
(-) GWR (Status)
The position of the R. Code wire may vary. Test this wire using the following chart:
BCM Side 1 2 3 4 5 6
Green or Black Connector located at the ignition switch.
- 12V at Key Input - 0V at Accessory
- 4.3V at Ignition - 3V at Start
Key Side J1850: Violet, pin 2
R. Code White or White/Blue
1
8
9
16
Diagnostic connector OBDII (connector side view)
J1850: Violet/Yellow: 2 (+) 12V: Brown/Red: 12
(+) 12V (-) Ground
(+) 12V: Red: 13
14
(+) 12V
(-) Ground: Black: 14
RAP Off: Black/White: 1 Driver Door Sense Trigger
[2] (-)
10: Blue/White: (-) GWR (Status) Input
Door Status Output: Green/White: 3
9: Pink: (+) Ignition Input
Tach Output: Violet/White: 5
12
[1] (AC)
10
(-) Trunk Status Output: Red/Black: 4
8: Violet: (+) Starter Input 2: Blue: (-) Unlock Input
R. Code: Violet/Green: 8
1: Green: (-) Lock Input
R. Code: Violet/Brown: 9 (-) E-brake Status Output: Orange/Black: 11
2
RF
LED
DBALL/ DBALL2
4
Prog. button
(+)12V RX (-) Ground TX
P#: XKD2D65
Not required in D2D mode. [1] Tach [2] If
wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
applicable - see Vehicle Application Guide. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 7
Vehicle Wiring Reference Chart - Type 2 (+)12V, R.Code, Ignition 1, Accessory, Parking Lights, J1850 Vehicles
Years
(+) 12V
R. Code
Ignition
Accessory
Parking Lights
J1850
Chevrolet 2004-12
High Driver Kick Panel, Ign. Switch, Orange White/Blue, pin 3
Ign. Switch, White/Green, pin 4
Ign. Switch, White/Red, pin 6
Passenger Kick Panel, OBDII, Violet, pin 2 Brown
2004-12
High Driver Kick Panel, Ign. Switch, Orange White/Blue, pin 3
Ign. Switch, White/Green, pin 4
Ign. Switch, White/Red, pin 6
Passenger Kick Panel, OBDII, Violet, pin 2 Brown
H3
2006-09
High Driver Kick Panel, Ign. Switch, Orange White/Blue, pin 3
Ign. Switch, White/Green, pin 4
Ign. Switch, White/Red, pin 6
Passenger Kick Panel, OBDII, Violet, pin 2 Brown
Isuzu I-280 I-290 I-350 I-370 Saturn
2006 2007-08 High Driver Kick Panel, Ign. Switch, Orange White/Blue, pin 3 2006 2007-08
Ign. Switch, White/Green, pin 4
Ign. Switch, White/Red, pin 6
Passenger Kick Panel, OBDII, Violet, pin 2 Brown
Ion
2003-07
Colorado GMC Canyon Hummer
Elect. Power Steering Ign. Switch, White, Ign. Switch, Blue, Module, Red pin 2 pin 4
Ign. Switch, Brown, Light Switch, Brown pin 3
OBDII, Violet, pin 2
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 8
Installation Type 3 Refer to page 9 for the corresponding Vehicle Wiring Reference Chart. (-) Hood Switch
(+) Starter Output
(+) 12V Input
(+) Brake Input
(+) Accessory 2 Output (if required) (+) Ignition 1 Output (+) Ignition 2 Output (-)E-Brake Status Input [3] (AC) [2] (-)
Tach Input
Starter
(+) Accessory 1 Output
Remote
(-) Parking Lights Output
Trunk Status Input
[2] (-)
(-) Ground
(-) Lock Output (-) Unlock Output (-) Rear Hatch or Trunk Release Output [1]
Door Status Input
(-) GWR (Status)
J1850: Violet, pin 2 1
8
9
16
Diagnostic connector OBDII (connector side view)
J1850: Violet/Yellow: 2 (+) 12V: Red: 13
(-) Ground
(-) Ground: Black: 14
14
(+) 12V
Driver Door Sense Trigger [2]
Door Status Output: Green/White: 3 Trunk Status Output: Red/Black: 4
[3] (AC)
12
[2] (-)
10
[2] (-)
10: Blue/White: (-) GWR (Status) Input
RAP Off: Black/White: 1
3: Red/White: (-) Rear Hatch or Trunk Release Input [1] 2: Blue: (-) Unlock Input
Tach Output: Violet/White: 5
1: Green: (-) Lock Input
(-) E-brake Status Output: Orange/Black: 11
2
RF
LED
DBALL/ DBALL2
4
Prog. button
(+)12V RX (-) Ground TX
P#: XKD2D65
Not required in D2D mode. [1] Rear
Hatch or Trunk Release Input: On vehicle with a motorized rear hatch, this input will release the hatch. See programming options to change its operation.
[2] If
applicable - see Vehicle Application Guide.
[3] Tach
wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 9
Vehicle Wiring Reference Chart - Type 3 (+)12V, Ignition 1 & 2, Starter, Accessory 1 & 2, Brake, Parking Lights, J1850 Vehicles Buick Century Rendezvous Chevrolet Impala Monte Carlo Pontiac Aztek Vehicles
Years
(+) 12V
Ignition 1
Ignition 2
Starter
Accessory 1
2000-05 Ignition Switch, Red 2002-07 Fuse Box, Orange
Ignition Switch, Pink Steering Column, Pink
Ignition Switch, White Steering Column, Dk. Green
Ignition Switch, Yellow Ignition Switch, Orange Steering Column, Yellow Steering Column, Orange
2000-05 Ignition Switch, Red 2000-05 Ignition Switch, Red
Ignition Switch, Pink Ignition Switch, Pink
Ignition Switch, Green Ignition Switch, Green
Ignition Switch, Yellow Ignition Switch, Yellow
Ignition Switch, Orange Ignition Switch, Orange
2001-05 Fuse Box, Orange
Steering Column, Pink
Steering Column, Dk. Green
Ignition Switch, Yellow
Steering Column, Orange
Years
Buick Century 2000-05 Rendezvous 2002-07 Chevrolet 2000-05 Impala [1] Monte Carlo [1] 2000-05 Pontiac Aztek 2001-05
Accessory 2
Brake
Ignition Switch, Brown Brake Switch, White Steering Column, Brown Brake Switch, White Ignition Switch, Brown Ignition Switch, Brown
Parking Lights Light Switch, Lt. Blue (+) Light Switch, Lt. Blue (-)
J1850 OBDII, Violet, pin 2 OBDII, Violet, pin 2
Steering Column, White BCM Gray Connector, Lt. Blue (-) OBDII, Violet, pin 2 Brake Switch, White At Switch, Lt. Blue (-) OBDII, Violet, pin 2
Steering Column, Brown Brake Switch, White
Light Switch, Lt. Blue (-)
OBDII, Violet, pin 2
[1] Make sure the 2nd Accessory is powered up on the Chevrolet Monte Carlo & Impala. This NEEDS to be done otherwise, the vehicle will not crank the starter.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 10
Installation Type 4 Refer to pages 11 and 12 for the corresponding Vehicle Wiring Reference Chart. (+) Brake Input
(-) Hood Switch (+) 12V Input
(+) Parking Lights Output
(+) Accessory 2 Output (if required)
(-) E-Brake Status Input [2] (AC) [1] (-)
Tach Input
Starter
(+) Accessory Output
Remote
(+) Ignition 2
Trunk Status Input
[1] (-)
(-) Ground
(-) Lock Output (-) Unlock Output (-) Trunk Release Output (+) Starter Output (+) Ignition 1 Output
Door Status Input
(-) GWR (Status)
J1850: Violet, pin 2 1
8
9
16
Diagnostic connector OBDII (connector side view)
J1850: Violet/Yellow: 2 (+) 12V: Red: 13
(-) Ground
(-) Ground: Black: 14
14
(+) 12V
Driver Door Sense Trigger RAP Off: Black/White: 1 10: Blue/White: (-) GWR (Status) Input [1] (-)
Door Status Output: Green/White: 3 Trunk Status Output: Red/Black: 4 Tach Output: Violet/White: 5
10
[2] (AC)
9: Pink: (+) Ignition Input
12
[1] (-)
R. Code: Violet/Green: 8
3: Red/White: (-) Trunk Release Input 2: Blue: (-) Unlock Input
R. Code: Violet/Brown: 9
1: Green: (-) Lock Input
(-) E-brake Status Output: Orange/Black: 11
2
IGNITION KEY
8: Violet: (+) Starter Input
RF
LED
DBALL/ DBALL2
4
Prog. button
(+)12V RX (-) Ground TX
P#: XKD2D65
Bulb test
Bulb test wire coming from black connector at the ignition switch.
Black or Orange/Black Yellow
White or Red/White
BCM
Not required in D2D mode. [1] If
applicable - see Vehicle Application Guide.
[2] Tach
wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 11
Vehicle Wiring Reference Chart - Type 4 (+)12V, Ignition 1 & 2, Starter Vehicles Cadillac Escalade Chevrolet Astro Avalanche Blazer Cavalier Equinox Express Van Malibu Malibu Classic S10 Pick-Up Silverado Suburban Suburban Tahoe GMC Envoy Jimmy Safari Savana Sierra Sonoma Sonoma Yukon Isuzu Hombre Oldsmobile Alero Bravada Intrigue Pontiac Sunfire Torrent Trans Sport Saturn Sedan Coupe S-Series VUE VUE
Years
(+) 12V
Ignition 1
Ignition 2
Starter
2000-02 Ign. Harness, Red
Ign. Harness, Pink
Ign. Harness, White
Ign. Harness, Yellow
2000-05 2002 2000-05 2000-05 2005-06 2000-02 2000-03 2004-05 2000-04 2000-02 1998-99 2000-02 2000-02
Ign. Harness, Red Ign. Harness, Red Steering Column, Red Ign. Harness, Red Ign. Harness, Red/White Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red Ign.Harness, Red Ign. Harness, Red Ign. Harness, Red
Ign. Harness, Pink Ign. Harness, Pink Steering Column, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink
Ign. Harness, White Ign. Harness, White Steering Column, White Ign. Harness, White N/A Ign. Harness, White Ign. Harness, Green Ign. Harness, Green Ign. Harness, White Ign. Harness, White Ign. Harness. White Ign. Harness, White Ign. Harness, White
Ign. Harness, Yellow Ign. Harness, Yellow Steering Column, Yellow Ign. Harness, Yellow N/A Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow
2000-01 2000-05 2000-05 2000-03 2000-02 2000 2001-04 2000-02
Steering Column, Red Steering Column, Red Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red Ign. Harness, Red
Steering Column, Pink Steering Column, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink
Steering Column, White Steering Column, White Ign. Harness, White Ign. Harness, White Ign. Harness, White Ign. Harness, White Ign. Harness, White Ign. Harness, White
Steering Column, Yellow Steering Column, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow Ign. Harness, Yellow
Ign. Harness, Red
Ign. Harness, Pink
Ign. Harness, White
Ign. Harness, Yellow
2000
2000-04 Ign. Harness, Red 2000-01 Steering Column, Red 2000-02 Ign. Harness, Red
Ign. Harness, Pink Ign. Harness, Green Steering Column, Pink Steering Column, White Ign. Harness, Pink Ign. Harness, Green
Ign. Harness, Yellow Steering Column, Yellow Ign. Harness, Yellow
2000-05 Ign. Harness, Red 2006 Ign. Harness, Red/White 2000-04 Ign. Harness, Red
Ign. Harness, Pink Ign. Harness, Pink Ign. Harness, Pink
Ign. Harness, White N/A Ign. Harness, White
Ign. Harness, Yellow N/A Ign. Harness, Yellow
2000-01 2000-04 2002-05 2006-07
Ign. Ign. Ign. Ign.
Ign. Harness, Green N/A N/A N/A
Ign. Ign. Ign. Ign.
Ign. Ign. Ign. Ign.
Harness, Harness, Harness, Harness,
Red Red Orange Orange
Harness, Harness, Harness, Harness,
Pink Pink Pink Pink
Harness, Harness, Harness, Harness,
Yellow Yellow Yellow Yellow
Continued on next page
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 12
Accessory 1 & 2, Brake, Parking Lights, J1850 Vehicles Cadillac Escalade Chevrolet Astro Avalanche Blazer Cavalier Equinox Express Van Malibu Malibu Classic S10 Pick-Up S10 Pick-Up Silverado Suburban Tahoe GMC Envoy Jimmy Safari Savana Sierra Sonoma Sonoma Yukon Isuzu Hombre Oldsmobile Alero Bravada Intrigue Pontiac Sunfire Torrent Trans Sport Saturn Sedan Coupe S-Series VUE VUE
Years
Accessory 1
Accessory 2
Brake
Parking Lights
J1850
2000-02 Ign. Harness, Orange
Ign. Harness, Brown
Brake Switch, White
Light Switch, Brown (+)
OBDII, Violet, pin 2
2000-05 2002 2000-05 2000-05 2005-06 2000-02 2000-03 2004-05 2000 2001-04 2000-02 2000-02 2000-02
Ign. Harness, Orange Ign. Harness, Orange Steering Column, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange
N/A Ign. Harness, N/A Ign. Harness, N/A N/A Ign. Harness, Ign. Harness, N/A Ign. Harness, N/A Ign. Harness, N/A
Brake Switch, White Brake Switch, White Steering Column, White Brake Switch, White Brake Switch, Lt. Blue Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White
Driver Kick Panel, Brown (+) BCM Gray Connect., Brown, pin 6 (+) Relay Block Connect., Lt. Blue (+) Light Switch, Brown (+) BCM Gray Connect., Brown, pin B7 (+) Light Switch, Brown (+) Light Switch, Brown (+) Light Switch, Brown (+) Light Switch, Lt. Blue (+) Light Switch, Lt. Blue (+) BCM Gray Connect., Brown, pin 6 (+) BCM Gray Connect., Brown, pin 6 (+) Light Switch, Brown (+)
OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII,
Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet,
pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2
2000-01 2000-05 2000-05 2000-03 2000-02 2000 2001-04 2000-02
Steering Column, Orange Steering Column, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange Ign. Harness, Orange
N/A N/A N/A N/A N/A N/A Ign. Harness, Brown Ign. Harness, Brown
Steering Column, White Steering Column, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White Brake Switch, White
Lt. Blue: Relay Block Connect. (+) Lt. Blue: Relay Block Connect. (+) Driver Kick Panel, Brown (+) Light Switch, Brown (+) BCM Gray Connect., Brown, pin 6 (+) Light Switch, Lt. Blue (+) Light Switch, Lt. Blue (+) Light Switch, Brown (+)
OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII, OBDII,
Violet, Violet, Violet, Violet, Violet, Violet, Violet, Violet,
pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2 pin 2
Ign. Harness, Orange
N/A
Brake Switch, White
Light Switch, Lt. Blue (+)
OBDII, Violet, pin 2
2000
Brown Brown
Brown Brown Brown Brown
2000-04 Ign. Harness, Orange Ign. Harness, Brown 2000-01 Steering Column, Orange N/A 2000-02 Ign. Harness, Orange N/A
Brake Switch, Lt. Blue Radio Plug, Brown (+) Below Steering Column, White Below Steering Column, Brown (+) Brake Switch, White Light Switch, Brown (+)
OBDII, Violet, pin 2 OBDII, Violet, pin 2 OBDII, Violet, pin 2
2000-05 Ign. Harness, Orange 2006 Ign. Harness, Orange 2000-04 Ign. Harness, Orange
Ign. Harness, Brown N/A N/A
Brake Switch, White Brake Switch, Lt. Blue Brake Switch, White
Light Switch, Brown (+) BCM Gray Connect., Brown, pin B7 (+) Driver Kick Panel, Brown (+)
OBDII, Violet, pin 2 OBDII, Violet, pin 2 OBDII, Violet, pin 2
2000-01 2000-04 2002-05 2006-07
Ign. Ign. Ign. Ign.
Brake Switch, Brake Switch, Brake Switch, Brake Switch,
Light Switch, Brown (+) Light Switch, Brown (+) Light Switch, Brown (+) Driver Kick Panel, Brown (+)
OBDII, OBDII, OBDII, OBDII,
Ign. Ign. Ign. Ign.
Harness, Harness, Harness, Harness,
Orange Orange Orange Orange
Harness, Harness, Harness, Harness,
Brown Brown Brown Brown
Lt. Lt. Lt. Lt.
Blue Blue Blue Blue
Violet, Violet, Violet, Violet,
pin 2 pin 2 pin 2 pin 2
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 13
Module Programming Refer to the LED Diagnostics section on pages 19-20 for more information and for troubleshooting purposes.
Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. Warning! To take advantage of advanced features, you must use XpressVIP 4.5 or higher. Using version 2.9 or 3.1 will limit available functions and features. 1. Connect the interface module to your computer using the XKLoader. 2. Open an Internet Explorer browser (version 6 or higher), and go to www.directechs.com. The detail of the platform and firmware that is currently saved on the interface module will be indicated in the top right corner of the page. 3. Select the year, make and model of the vehicle; the page will refresh to display the compatible firmware. 4. In the search result page, select Flash Standard install, and follow the instructions provided on the screen. 5. Once you have configured your options, click on the FLASH button to upload the firmware onto the interface module. 6. The following message will be displayed when the upload is completed: “The flashing is successfully completed. You may now unplug the kit.” You can now proceed with the programming instructions below. D2D Installation If required for your installation, connect the 10-pin, 12-pin and 14-pin harnesses to the module, then connect the 4-pin D2D harness.
in 14-p 2-pin 1
D2D 0-pin 1 3rd
th
4
st
1
2nd
OR W2W Installation If required for your installation, connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module.
in 14-p 2-pin 1
D2D 0-pin 1 3rd
1st
2nd
Type 1
1
Wait until the LED turns ON solid red.
N IG
2
Key IN
Turn the key to ignition, the LED starts to flash orange.
OFF
Solid
START
& Flashes No Clutch
P
Key IN
N
R N D 2 L
OFF
4
Turn the key to start and keep this position until the LED starts to flash green and orange.
Position “D”
IG
3
Make sure the vehicle cannot start: - Automatic transmission: Put the transmission in Drive (D position). - Manual Transmission: Do NOT depress the clutch pedal.
START
& Flashes
5
Press unlock on the factory key fob (if not available, press the programming button 5 times) and the LED turns ON solid orange for 3 seconds.
& Solid Orange x3 secs
Go to the next page to complete the module programming.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 14
Position “P”
6
For vehicles equipped with an automatic transmission, put the transmission in Park (P position).
7
You can remove the key, the module is now programmed and ready to operate.
P
N IG
Key OUT
OFF
R N D 2 L
START
You have successfully completed the module programming sequence.
Types 2 & 4
1
Wait until the LED turns ON solid red.
N IG
2
Key IN
Turn the key to ignition, the LED starts to flash orange.
OFF
Solid
START
& Flashes No Clutch
P R N D 2 L
N
Key IN
OFF
4
Turn the key to START and keep this position until the LED starts to flash green.
Position “D”
IG
3
Make sure the vehicle cannot start: - Automatic transmission: Put the transmission in Drive (D position). - Manual Transmission: Do NOT depress the clutch pedal.
START
&
Turn the key back to the ignition position. The LED starts to flash green 1, 2 or 3 times and then turns OFF.
6
For vehicles equipped with an automatic transmission, put the transmission in Park (P position).
7
You can remove the key, the module is now programmed and ready to operate.
N
5
IG
OFF
Flashes
START
&
& Flashes
OFF
Position “P” P
IG
OFF
Key OUT
N
R N D 2 L
START
You have successfully completed the module programming sequence.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 15
Type 3
1
Wait until the LED turns ON solid red.
N
Key IN
Turn the key to ignition, the LED starts to flash orange.
IG
2
OFF
Solid
START
& Flashes
P
Key IN
N
Turn the key to START and keep this position until the LED starts to flash green.
No Clutch
R N D 2 L
OFF
4
Position “D”
IG
3
Make sure the vehicle cannot start: - Automatic transmission: Put the transmission in Drive (D position). - Manual Transmission: Do NOT depress the clutch pedal.
START
& Flashes
6
For vehicles equipped with an automatic transmission, put the transmission in Park (P position).
7
You can remove the key, the module is now programmed and ready to operate.
& Solid 3 sec.
Off
Position “P” P
Key OUT
OFF
R N D 2 L
N
The LED turns ON solid green for 3 seconds then shuts off.
IG
5
START
You have successfully completed the module programming sequence.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 16
Module Reset
A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed to the module using the web config tool will not be affected. D2D Installation
If required for your installation, connect the 10-pin, 12-pin & 14-pin harnesses to the module. Press and hold the programming button, then connect the 4-pin D2D harness.
1
3rd
th
5
st
1
2nd
4th
OR W2W Installation
in 14-p 2-pin 1
D2D 0-pin 1
If required for your installation, connect the 10-pin & 12-pin harnesses to the module. Press and hold the programming button, then connect the 14-pin harness to the module.
2
in 14-p 2-pin 1
D2D 0-pin 1
4th
st
1
Wait 3 seconds until the LED turns ON solid orange then release the programming button. The LED then turns ON solid red.
2nd
3rd
&
& Release
Solid
Solid
Hard Reset Warning Against Executing a Hard Reset! A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such as RFTD and D2D options) may have to be reconfigured. See the Feature & Option List section of this guide. D2D Installation
If required for your installation, connect the 10-pin, 12-pin & 14-pin harnesses to the module. Press and hold the programming button, then connect the 4-pin D2D harness.
1
5th
3rd
1st
2nd
4th
OR W2W Installation
If required for your installation, connect the 10-pin & 12-pin harnesses to the module. Press and hold the programming button, then connect the 14-pin harness to the module.
2
in 14-p 2-pin 1
D2D 0-pin 1
in 14-p 2-pin 1
D2D 0-pin 1 1st
4th
2nd
3rd
Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the LED starts to flash orange and red.
& Solid
3
Flashes
&
Release the programming button. The LED turns ON solid red. Release
Solid
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 17
Feature & Option List It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page on www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the information on this page. * Default Option
Feat.
1
2
3
4
5
6
Operation
RFTD Output Type
Flashes/Options 1. No RF Output*
Module is connected to a remote starter using a standard installation.
2. RFTD Output
Module is connected to an XL202 using an RSR or RXT installation (when available).
3. SmartStart
Module is connected to SmartStart using an RSR or RXT installation (when available).
1. Driver Priority*
Unlocks only the driver door on first press and unlocks all doors on a second press within 5 seconds.
2. Unlock All Doors
Unlocks all doors on first press.
1. Trunk*
The vehicle trunk will open when the "Trunk" button is pressed.
2. Right Sliding Door
The vehicle right sliding door will open when the "Trunk" button is pressed.
2. Left Sliding Door
The vehicle left sliding door will open when the the "Trunk" button is pressed.
1. Trunk
The vehicle trunk will open when the "AUX1" button is pressed.
2. Right Sliding Door*
The vehicle right sliding door will open when the "AUX1" button is pressed.
2. Left Sliding Door
The vehicle left sliding door will open when the the "AUX1" button is pressed.
1. Trunk
The vehicle trunk will open when the "AUX2" button is pressed.
2. Right Sliding Door
The vehicle right sliding door will open when the "AUX2" button is pressed.
2. Left Sliding Door*
The vehicle left sliding door will open when the the "AUX2" button is pressed.
1. Disabled*
The vehicle doors will not lock automatically.
2. Ignition
The vehicle doors will lock when ignition is turned ON and unlock when ignition is OFF.
Unlock Driver Priority
Trunk
AUX1
AUX2
Automatic Controlled Door Lock
1. Disabled
2. Safelock
7
Description
Smart OEM Alarm Control 3. Enabled*
The OEM alarm will not be controlled by DBALL upon remote start. No disarm or arm command will be executed at the beginning or end of the sequence; it must be controlled by the Remote Starter. Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the beginning of the sequence, and relock after start and shutdown. Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle in the remote start sequence, only when required. The reason for this is, factory alarm control must often be done by lock or unlock operation. This could create unnecessary actions on door lock modules, such as the horn to honk. When possible, Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will also monitor the remote starter actions so that the factory alarm control is not done twice. A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 18
Feature Programming Programming Button
To enter feature programming routine - Use the key to turn the ignition ON, then OFF. - Within 5 sec, press and HOLD the Programming button. The orange LED turns ON after 3 seconds. Release the Programming button. - The green LED starts flashing slowly one time to indicate the feature number is 1. After a short delay, the red LED flashes rapidly to indicate the current option of feature 1. It repeats until next action happens. Changing feature options - Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. - The red LED flashes rapidly the number of times equal to the current option number. After a short delay, the green LED flashes slowly the number of times to indicate the current feature. It repeats until next action happens. Accessing another feature - Press and release the Programming button a number of times to advance from the current feature to the next desired feature. - The green LED flashes slowly the number of times equal to the feature number. After a short delay, the red LED flashes rapidly to indicate the current option of the current feature. It repeats until next action happens. When the maximum number of feature or option is reached, the LED will starts flashing again from the first feature or option. Once a feature is programmed - Another feature(s) can be programmed. - The feature programming can be exited. Exiting feature programming - No activity for 30 seconds; after 30 seconds, the orange LED will turn ON for 2 seconds to confirm exiting. OR - Press and HOLD the Programming button for 3 seconds. After 3 seconds, the orange LED will turn ON for 2 seconds to confirm exiting.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 19
LED Diagnostics & Troubleshooting LED Status Module Programming
Description
Troubleshooting
Solid
Solid red
Waiting for bus detection.
If the key was turned to IGNITION: To know if the bus is detected, connect the pink ignition input wire from the black 10-pin connector to (+) 12V. If the LED starts flashing orange: The bus was detected, but the ignition was not detected in data. In this case, connecting the pink ignition input wire from the black 10-pin connector will fix the issue.
Flashes x1
Flashes red x1
Data bus detection timeout.
J1850 was not detected. Refer to the wiring diagram to verify your connections to the vehicle.
Flashes x3
Flashes red x3
Bypass detection timeout.
Bypass was not detected after a timeout period. Refer to the wiring diagram to verify your connections to the vehicle.
Solid Red 3 sec.
Solid red 3 sec.
The Saturn Ion type of bypass programmed, but J1850 did not.
J1850 was not detected. Refer to the wiring diagram to verify your connections to the vehicle.
Flashes
Flashes orange
Waiting for the bypass to program.
Waiting for the key to be at the START position. If it was already turned to that position, start is not being seen in data. Connect the violet start input wire from the black 10pin connector on the module.
Flashes x1
Flashes orange x1
Programming completed.
Bypass detected = PassLock 1 door lock is on ISO.
Flashes x2
Flashes orange x2
Programming completed.
Bypass detected = PassLock 2 door lock is on ISO.
Flashes x3
Flashes orange x3
Programming completed.
Bypass detected = PassLock 3 door lock is on ISO.
Flashes
Flashes orange & green
Waiting for keyless programming.
The module detected the ISO door lock. Press lock or unlock on the OEM FOB to validate your installation. If it does not work, refer to the wiring diagram to verify your connections. If the OEM FOB is not available, it is possible to skip the keyless programming by pressing 5 times on the programming button. The LED will go to the final status, and it will then turn OFF. The module will be programmed in ISO door lock anyway.
Flashes x1
Flashes green x1
Programming completed.
Bypass detected = PassLock 1 door lock is on J1850.
Flashes x2
Flashes green x2
Programming completed.
Bypass detected = PassLock 2 door lock is on J1850.
Flashes x3
Flashes green x3
Programming completed.
Bypass detected = PassLock 3 door lock is on J1850.
Analogue bypass programming in progress, waiting on more information to complete the sequence.
If the key was turned back to IGNITION, the module did not move to the next step because it noticed an error in the second recorded value. Refer to the wiring diagram to verify your MUX connections. It is possible to skip the bypass by pressing 5 times on the programming button. The LED will turn ON solid red for 3 seconds, and then it will turn OFF to indicate the bypass was skipped. The module will only do convenience in this case.
Flashes
Flashes green
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 20
LED
Status
Description
Troubleshooting
Active Ground While Running Flashes
Flashes
Flashes
Flashes green
GROUND OUT ON (GWR) command received.
Flashes red & orange
IGNITION ON command received.
Flashes green quickly
START ON command received.
Otherwise, the Ground While Running (status) signal was lost or was never received by the module. Commands can come from RF, D2D or W2W. Otherwise, the ignition signal was not received by the module. In a W2W install, it will show only if the ignition input wire is used. Otherwise, the start signal was not received by the module. In a W2W install, it will show only if the ignition input wire is used.
D2D & W2W Commands Flashes x1
Flashes orange x1
Lock command received.
Flashes x2
Flashes orange x2
Unlock command received.
Flashes x3
Flashes orange x3
Trunk command received.
Flashes x4
Flashes orange x4
Aux1 command received.
Flashes x5
Flashes orange x5
Aux2 command received.
If the bypass module fails to flash, it means the module did not receive the signal. Commands can come from RF, D2D or W2W.
© 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: GM5
Rev.: 20150731 Page 21
Limited One Year Consumer Warranty For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description. This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction. TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS, AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE. This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part. For further details relating to warranty information of Directed products, please visit the support section of DIRECTED’s website at: www.directed.com 920-10012-01 2013-07 This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only. Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; European Patent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada.
© 2015 Directed. All rights reserved.
Quick Reference Guide DBALL/DBALL2-GM5
Notes
List of Available Commands Note that the information below is for Viper, Clifford and Python models. Icons and commands may differ depending on the remote brand and model purchased. Refer to your authorized installation center for more information. Button(s)
Actions Press & hold for 1 second to lock. Press & hold for 1 second to unlock. Press & hold for 1 second to remote start. Press & hold for 5 seconds to activate the trunk release (optional).
x1 +
Press once, then to activate the rear hatch/tail glass release (optional).*
x3 +
Press 3 times, then the panic mode.
x1 +
Press once, then remote starter runtime.
to activate to reset the
* This output is configurable. see your authorized installation center for more information.
© 2015 Directed. All rights reserved.
