DCI Quote Request Form - DCI, Inc.

2 downloads 182 Views 716KB Size Report
Product Contact Finish (Internal). Product Contact Weld Finish (Internal). Is Electropolish Required? (Internal). Non-Pr
DCI Inc.

SSWI

600 North 54th Ave

2550 S. East Ave #101B

St. Cloud, MN 56303

Fresno, CA 93706 Phone: 559-233-7116 www.sanitarystainless.com

Phone: 320-252-8200 www.dciinc.com

DCI Tank Questionnaire DCI INTERNAL USE ONLY - (IF REQUESTED)

Quote #

Budget Price **Budget Price based on supplied information

Red is a required field to complete proper quote. Answer to the best of your abilities.

Email: Phone: ZIP:

Customer Contact: Company Physical Address City and State/Province

General Information Quantity Customer ID Tag Working Volume Product Specific Gravity Site Zip Code

-

Vessel Configuration Vessel Mobility Location Electrical

-

-

-

Tank Details Vessel Design

Heat Transfer

Design Pressure (PSIG) Design Vacuum (PSIG) ASME Code Stamped Design Temperature °F. Top Head Design Bottom Head Design Desired Outlet Height of vessel from floor level

-

-

-

Reset Heat Transfer

-

Initial Product Temperature °F Heat Transfer Duty with Heat Transfer Media Type Media Temperature °F end result Final Product Temperature °F Time to Accomplish Heat Transfer

Material of Construction

Product Contant Alloy / Internal Non-Product Contact Alloy / External Support Alloy / External Gasket Materials Are USP Class VI Materials Required?

NA - Heat Transfer

Type of Heat Transfer Material of Construction Heat Transfer Design Pressure (PSIG) (if known)

-

Insulation

Vessel Finish

Insulated or Non-Insulated

-

Product Contact Finish (Internal) Product Contact Weld Finish (Internal) Is Electropolish Required? (Internal) Non-Product Contact Finish (External) Non-Product Contact Weld Finish (External) Vessel Support Finish Vessel Support Weld Finish

Tank Notes (if applicable)

Nozzle Schedule Location

Size

Quantity

Description

Accessories / Notes

-

-

Agitation Hardware

NA - Agitator

Agitation Supplier Agitation Installer Agitation Type Motor Finish Gearbox Finish Process data Mixing Volume (Operating) Viscosity

Reset Agitator

-

Orientation Location Agitator Mounting Method

-

Available Power Phase /Hz / Volts Washdown Duty Motor Required Inverter Rated Motor Required

-

-

Notes for Agitation and Control (if applicable)

-

-

Rate of mixing Turn over Rate (Vol./ min)

VFD's and / or Controls

Is a VFD (Variable Frequency Drive) required Are Controls required

-

Email

DCI Questionnaire, X-7388-1