... by infrared. 10 Burs Per Blister Pack. Bulk Packs of 100 Available ...... 800.275.0020 ⢠FAX: 631.434.7750. Ph: 63
Carbide & Diamond Bur
Catalog
with Reference Guide
www.defend.com
Carbide Bur Shanks and Head Sizes
02
Carbide Bur Product Listing
03
Diamond Bur Grits and Shapes
04
Diamond Bur Numbering System
05
Diamond Bur Product Listing
06-07
Usage and Maintenance
08
Diamond Bur Cross-Reference Chart
Carbide Bur Features & Benefits
Diamond Bur Features & Benefits
Made of Austrian Carbide
Precision centered Japan-made stainless steel #303
Exceeds the International Standard
German electroplating technology
Gives a fast, smooth vibration free performance, reducing patient discomfort as well as operative time
Minimal pressure required on turbine
Less stress on the handpiece and reduces the risk of early chuck failure This produces a longer lasting, durable bur, which is cost effective and and a better value for the money 100% inspected by infrared
01
10 Burs Per Blister Pack Bulk Packs of 100 Available
Concentric, balanced bur with long lasting cutting ability Maximum precision and minimum vibration Superior cutting efficiency and long instrument life Rapid, smooth and comfortable cutting 10 Burs Per Blister Pack
09-10
Types of Carbide Bur Shanks The three main types of shanks are Friction Grip(FG), Right Angle(RA) (also known as Latch-Type), and Handpiece (HP). It is important to know which type of shank you want when choosing a bur because each type is designed to fit into a certain type of handpiece.
FRICTION GRIP • For use in high speed handpieces and friction grip low speed contra angle heads. • Has the smallest diameter shank of all the types of carbide burs; the end of the shank is smooth and is held in place in the handpiece by friction against a chuck. • Short shank for use in miniature head handpiece.
16mm
19mm
FG SHORT SHANK 1.60mm
25mm
FG 1.60mm
FG LONG 1.60mm
RIGHT ANGLE/LATCH-TYPE (RA) • For use in latch-type contra angle heads in low speed handpieces. • Has a notch on the end allows a hook to latch onto it in the head of the handpiece. • Provides greater control when cutting dentin or enamel. 22mm RA 2.35mm Shank Diameter
HEAD DIAMETER / SIZES Per ISO standards the diameter of a rotary instrument is defined as the widest part of the cutting surface. Diamond Bur Diameters
1/10mm mm inches
005 0.5 0.020
006 0.6 0.024
007 0.7 0.028
008 0.8 0.031
009 0.9 0.035
010 1.0 0.039
012 1.2 0.047
014 1.4 0.055
016 1.6 0.063
018 1.8 0.071
021 2.1 0.083
023 2.3 0.091
1/10mm mm inches
031 3.1 0.122
033 3.3 0.130
035 3.5 0.138
037 3.7 0.148
040 4.0 0.157
042 4.2 0.165
045 4.5 0.177
047 4.7 0.185
050 5.0 0.197
055 5.5 0.217
060 6.0 0.236
065 6.5 0.256
www.defend.com
025 2.5 0.098
070 7.0 0.276
027 2.7 0.106
029 2.9 0.114
075 7.5 0.295
080 8.0 0.315
02
Carbide Operative Burs ROUND
FLAT FISSURE PLAIN CUT AMALGAM PREP
U.S. No.
1/4
1/2
1
2
4
6
8
Diameter (mm)
0.50
0.70
0.80
1.00
1.40
1.80
2.30
FG RA
U.S. No.
56
57
58
Diameter (mm)
0.90
1.00
1.20
U.S. No.
245
FG
Diameter (mm)
0.80
FG SS
FG
Round: For caries excavation, cavity preparation, and root canal access. Smaller sizes often used for single surface cavities, medium sizes oftenused for interproximal cavities in anterior teeth.
INVERTED CONE
U.S. No.
33.5
34
Diameter (mm)
0.70
0.80
35
37
1.00
1.40
U.S. No.
329
330
331
332
Diameter (mm)
0.60
0.80
1.00
1.20
FG
FG
FG SS
RA
FLAT FISSURE CROSS CUT
U.S. No.
556
557
558
Diameter (mm)
0.90
1.00
1.20
U.S. No.
557L
558L
Diameter (mm)
1.00
1.20
TAPER FISSURE CROSS CUT (LONG HEAD)
U.S. No.
700L
701L
Diamter (mm)
1.00
1.20
U.S. No.
957
958
Diamter (mm)
1.00
1.10
FG
End Cutting: Used to produce a flat preparation floor, refine preparations, and to mark the depth of bone reduction in crown lengthening. Help reduce any possibility of impacting the surface of the adjacent tooth with the cutting surface of a bur.
FG
Pear: For contouring the occlusal anatomy, preparing cavities, and removing amalgam. Produces an under-cut preparation with round internal line angles.
Inverted Cone: For producing undercuts in cavity preparations; slightly rounded edges on the blade corners reduce chipping for a smoother cut. Ideal for amalgam removal; may also be used to contour the occlusal anatomy of final restorations and for flattening pulpal and gingival walls.
END CUTTING BURS
FLAT FISSURE CROSS CUT (LONG HEAD)
PEAR
Flat Fissure Plain Cut/Flat Fissure Cross Cut: For producing preparations with straight parallel sides and flat floors, gaining access to carious dentin, establishing preparation form, and creating retentive locks. Cross cut burs have more cutting edges.
TAPER FISSURE PLAIN CUT
DOMED FISSURE PLAIN CUT
U.S. No.
169
170
171
U.S. No.
1156
1157
1158
Diameter (mm)
0.90
1.00
1.20
Diamter (mm)
0.90
1.00
1.20
FG
FG
FG
FG FG SS RA
TAPER FISSURE PLAIN CUT (LONG HEAD)
Domed Fissure Plain Cut/Domed Fissure Cross Cut: For producing a preparation with straight, parallel, or minimally divergent walls with round internal line angles. Also used to gain access to carious dentin, establish preparation form, and create retentive locks. Cross cut burs have more cutting edges.
DOMED FISSURE CROSS CUT
TAPER FISSURE CROSS CUT
U.S. No.
699
700
701
702
703
Diamter (mm)
0.90
1.00
1.20
1.60
2.10
FG RA
U.S. No.
169L
170L
171L
Diamter (mm)
0.90
1.00
1.20
FG
U.S. No.
1557
1558
Diamter (mm)
1.00
1.20
FG
Taper Fissure Plain Cut/Taper Fissure Cross Cut: For producing a preparation with tapered, divergent walls and a flat floor. Also used for inlay/onlay preparation and to section teeth and cut bone. Cross cut burs have more cutting edges.
Carbide Trimming and Finishing Burs Twelve bladed finishing burs (7000 series) provide a smooth finish on composite, amalgam,enamel, dentin, ortho debonding, and other dental materials. Best for controlled contouring and finishing.
EGG
FLAME
U.S. No. 12 Flutes
7104
Diameter (mm)
1.40
TF 12 Flutes
03
TAPER POINTED
U.S. No. 12 Flutes
7404
7406
7408
U.S. No. 12 Flutes
7612
Diameter (mm)
1.40
1.80
2.30
Diameter (mm)
0.14
TF 12 Flutes Egg: For contouring and finishing occlusal and lingual surfaces.
TF 12 Flutes
NEEDLE
U.S. No. 12 Flutes
7901
7902
7903
Diameter (mm)
0.90
1.00
1.20
TF 12 Flutes Needle: For Contouring and finishing interproximal margins, Occlusal margins, facial Surfaces and cavosurface margins.
www.defend.com
Diamond Bur Grits Diamond burs also come in a variety of grit sizes. Coarse and super-coarse diamond grits for tooth reduction are the most popular, while fine and super-fine for polishing and smoothing are less popular. Grinding and polishing diamonds should be used to trim and finish micro-filled composites. Coarse grinding tools leave behind striations; fine and extra fine diamonds are suitable for finishing.
Code
Description
SF
Super Fine
30
F
Fine
50
M
Medium
107-120
C
Coarse
150-180
SC
Super Coarse
180-250
Diamond Bur Shapes Description
Shape
ISO
Description
Shape
ISO
Barrel
811
037, 038
Pear
822, 830
237, 238, 239
Cylinder Rounded Shoulder
835KR, 836KR, 837KR, 880, 881, 881KS
146, 156, 157, 158
Pointed Cylinder
879, 884, 885, 886
129, 130, 131
Depth Cutting
834
552
Round
801
001
Double Inverted Cone
806, 813
019, 032
Round+Neck
802
002
Egg Football
368, 369, 379
243, 257, 277
Surgical Length Round
801L
001(316)
End Cutting
839, 840
150
Round End Cylinder
838, 881
139, 141
Flame
390, 860, 861, 862, 863
247, 248, 249, 250, 254, 297, 298
Round End Taper
Flat End Cylinder
835, 836, 837
108, 109, 110, 111, 141
Flat End Taper
845, 846, 847, 848
Gingival Cureliage
849, 850, 850L, 855, 855L, 856, 856L
196, 197, 198, 199
Round Wheel
909
066, 067, 068
169, 170, 171, 172, 173
Safe End
851
220
877K, 878K, 879K
297, 298
Separation
889
169, 540
Gross Reduction
651, 652, 654, 655
511, 512, 513
T368, T850, T855, T855L, T862, T863
197, 199, 249, 257
Inter Proximal
392
465
845KR, 846KR, 847KR
544, 545, 546
Inverted Cone
805, 807
010, 225
Torpedo Cylinder
877, 878, 879
288, 289, 290
Knife Edge
825
304
Wheel
818
041, 042
Needle
852, 858, 859, 859L, 889
160, 170, 171, 172, 173, 198, 199
X-Mas Tree
852
161
www.defend.com
Specials - Cool Cut Taper Rounded Shoulder
04
Diamond Bur Grits THE ISO NUMBERING SYSTEM A formal International Standards Organization (ISO) coding system has been established to simplify identification and ordering of all burs. An example of the ISO coding system is as follows:
B
A C
805
016
MEDIUM
shape A. Head (e.g. round,
of B. Indication maximum head
C.
inverted cone etc)
diameter in 1/10ths mm.
ISO Bur Shanks
D.
Indication of total bur length
ISO Bur Head Sizes
M
=
Normal/Medium
BLUE
SC
=
Super Coarse
BLACK
C
=
Coarse
GREEN
F
=
Fine
RED
SF
=
Super Fine
YELLOW
05
Indication of grit size (e.g. coarse-green, fine-red, etc)
Maximum diameter of cutting head 009
0.9mm
035
3.5mm
010
1.0mm
037
3.7mm
012
1.2mm
042
4.2mm
014
1.4mm
045
4.5mm
016
1.6mm
047
4.7mm
018
1.8mm
050
5.0mm
021
2.1mm
055
5.5mm
023
2.3mm
060
6.0mm
025
2.5mm
065
6.5mm
027
2.7mm
070
7.0mm
029
2.9mm
075
7.5mm
031
3.1mm
080
8.0mm
033
3.3mm
100
10.0mm
www.defend.com
Diamond Burs ROUND END TAPER
850.010
850.012
850.014
850.016
850.018
852.010
856.012
856.014
856.016
856.018
856.021
Diameter (mm)
1.0
1.2
1.4
1.6
1.8
1.0
1.2
1.4
1.6
1.8
2.1
2.5
Head Length (mm)
10.0
10.0
10.0
10.0
10.0
8.0
8.0
8.0
8.0
9.0
8.0
8.0
F
F
M
M
M C
C
Code
856.025
SF
Super Fine F
F
M
M
M C
Fine M
Medium Coarse
C
Super Coarse
M
C
C
C
C
SC
SC
SC
SC
C
C
C
C
SC
SC
SC
SC
NEEDLE
ROUND END TAPER CONTINUED
858.010
858.012
858.014
859.010
859.012
Diameter (mm)
1.4
1.6
1.8
Diameter (mm)
1.0
1.2
1.4
1.0
1.2
1.6
Head Length (mm)
9.0
9.0
9.0
Head Length (mm)
8.0
8.0
8.0
10.0
10.0
10.0
F
F
F
Code
856L.014
856L.016
Code
856L.018
859.016
Super Fine
Super Fine
Fine
F
F
F
Medium
M
M
M
Medium
M
M
M
Coarse
C
C
C
Coarse
C
C
C
SC
SC
Fine
Super Coarse
F
Super Coarse
FLAME
860.010
860.012
861.012
861.014
861.016
862.012
862.014
862.016
863.010
Diameter (mm)
Code
1.0
1.2
1.2
1.4
1.6
1.2
1.4
1.4
1.0
1.2
1.6
1.8
Head Length (mm)
4.0
5.0
6.0
6.0
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0
Super Fine
SF
SF
SF
F
F
F
F
F
F
F
F
M
M
M
M
M
M
M
M
C
C
C
C
C
SC
SC
Fine M
Medium
M
M
Coarse Super Coarse
863.012 863.016 863.018
SF M
BEVELED CYLINDER
Code
877.010
878.012
878.014
879-012
Diameter (mm)
1.0
1.2
1.4
Head Length (mm)
6.0
8.0
8.0
GINGIVAL CURETTAGE
879-014
885-010
885-012
886-012
1.2
1.4
1.0
1.2
1.2
1.4
1.6
9.5
10.0
8.0
8.0
10.0
10.0
10.0
886-014
886-016
Fine Medium
M
M
M
Coarse
C
C
C
M C
M C
Super Coarse
Super Fine Fine Medium Coarse Super Coarse
877K.012
878K-012
878K-016
Diameter (mm)
1.2
1.2
1.6
Head Length (mm)
6.0
8.0
8.0
M
M
M
C
C
Super Fine
Super Fine
SF: F: M: C: SC:
Code
www.defend.com
F
Fine
M
Medium
C
Coarse
C
C
C
C
Super Coarse
06
Diamond Burs ROUND & NECK
ROUND
INVERTED CONE
801.012
801.014
801.016
801.018
801.023
802.012
802.014
802.016
805.10
805.12
805.016
1.0
1.2
1.4
1.6
1.8
2.3
1.2
1.4
1.6
Diameter (mm)
1.0
1.2
1.6
1.8
1.4
1.6
Head Length (mm)
1.0
1.2
1.4
1.6
1.8
2.3
1.2
1.4
1.6
Head Length (mm)
1.3
1.3
1.4
1.6
3.0
4.0
M
M
M
M
Code
SF
Super Fine M
Coarse
Super Fine
F
F
M
M
M
M
M
M
M
M
Medium
C
C
C
C
C
C
C
C
Coarse
Fine Medium
Fine
F
F M C
C
Super Coarse
Super Coarse
DOUBLE INVERTED CONE
BARREL
806.010
806.012
806.014
806.016
813.014
813.016
Diameter (mm)
1.0
1.2
1.4
1.6
1.4
1.6
Head Length (mm)
3.0
3.0
2.0
2.0
2.0
2.0
Code
LONG PEAR
811.033
811.037
Diameter (mm)
3.3
3.7
Diameter (mm)
1.2
Head Length (mm)
5.5
5.5
Head Length (mm)
4.0
Code
Super Fine
830L.012
Code
Super Fine
Fine
Super Fine
Fine
Fine
Medium
M
M
M
M
M
M
Medium
Medium
M
Coarse
C
C
C
C
C
C
Coarse
Coarse
C
Super Coarse
Super Coarse
C
C
SC
SC
EGG/FOOTBALL
Code
368.018
368.020
Super Coarse
FLAT END TAPER
368.023
369.025
379.016
379.018
379.023
Code
847.014
847.016
847.018
848.010
848.016
848.018
Diameter (mm)
1.8
2.0
2.3
2.3
1.6
1.8
2.3
Diameter (mm)
1.4
1.6
1.8
1.0
1.6
1.8
Head Length (mm)
4.5
5.3
5.3
5.3
3.4
3.6
4.4
Head Length (mm)
8.0
8.5
8.0
8.0
10.0
10.0
Super Fine
Super Fine M
M
M
SF
SF
SF
SF
Fine
F
F
F
F
F
Fine
F
F
Medium
M
M
M
M
M
Medium
M
M
Coarse
C
C
C
C
Coarse
C
C
Super Coarse
C
C
C
SC
SC
Super Coarse
SC
FLAT END CYLINDER
835.008
835.010
Diameter (mm)
0.8
1.0
Head Length (mm)
4.0
4.0
Code
835.012
835.014
836.012
1.2
1.4
4.0
4.0
Super Fine
ROUND END CYLINDER
837.014 837.016 837.018
Coarse Super Coarse
M C
M C
M
C SC
INTER PROXIMAL
837.012
1.2
1.4
1.2
1.4
1.6
1.8
Diameter (mm)
0.9
Diameter (mm)
1.6
5.6
6.0
8.0
8.0
8.0
8.0
Head Length (mm)
8.0
Head Length (mm)
5.0
Super Fine
Super Fine
SF
Fine
Fine
F
Medium
M
SF
Medium
C SC
836.014
Fine
07
805.018 807.014 807.016
801.010
Diameter (mm)
Code
M
M
M
C
C
Code
838.009
Code
392-016
M
M
M
Medium
C
C
C
Coarse
Coarse
Super Coarse
Super Coarse
SC
M
SF: F: M: C: SC:
Super Fine Fine Medium Coarse Super Coarse
www.defend.com
Usage and Maintenance General Rotary Instrument Usage Tips Sterilize all burs before each use ■ Burs should be replaced frequently. A dull or damaged bur could result in reduced efficiency and possible harm to the patient ■ Never force a bur into the turbine ■ Observe recommended speeds and air pressure to avoid excessive heat ■
Maximum RPM Bur Diameter (1/10mm)
FG
HP
007-014
450,000
250,000
016-023
300,000
120,000
025-045
120,000
80,000
047-065
80,000
60,000
066-094
60,000
40,000
■ Avoid
putting pressure on the bur when in use Do not keep the bur still to avoid burning of the bur ■ Always insert the bur fully into the handpiece chuck ■ Always use sufficient water coolant ■ Do not use a bur in a worn chuck to avoid slippage and/or vibration that can lead to breakage ■
Rotary Instrument Maintenance Cleaning ■ Pre-soak the burs for at least 10 minutes in a disinfection solution that contains a corrosion inhibitor ■ Use a brush to clean the burs ■ Rinse thoroughly ■ Dry the burs and store in a clean and moisture-free environment Cleaning with UltraSonic ■ Insert burs in bur holders ■ Rinse thoroughly ■ Dry and store in a clean and moisture-free environment Sterilization ■ Place the burs in sterilization bags ■ Sterilize burs according to your autoclave manufacturer recommendations ■ Dry the burs and store in a clean and moisture-free enviroment ■ When using dry heat sterilization, sterilize at 170°C (340°F) for 1 hour. When used according to the manufacturer’s instruction, this will not corrode or dull carbide burs ■ Avoid cold sterilizing solutions as they contain oxidizing agents which may weaken carbide burs ■ Note: It is the responsibility of the user to ensure that the method of sterilization is effective
www.defend.com
08
Diamond Burs Cross Reference Chart
09
DEFEND Grit Round 801–010M M 801–012M M 801–012C C 801–014M M 801–014C C 801–016M M 801–016C C 801–018F F 801–018M M 801–018C C 801–023SF SF 801–023F F 801–023M M 801–023C C Round & Neck 802–012M M 802–012C C 802–014M M 802–14C C 802–16M M 802–016C C Inverted Cone 805–010M M 805–012F F 805–012M M 805–016M M 805–016C C 805–018F F 807–014M M 807–016M M 807–016C C 806–010M M 806–010C C 806–012M M 806–014C C 806–016M M 806–016C C Double Inverted Cone 806–012C C 806–014M M Barrel 811–033C C 811–033SC SC 811–037C C 811–037SC SC 813–014M M 813–014C C 813–016M M 813–016C C Pear 830L–012M M 830L–012C C Egg/Football 368–018SF SF 368–018F F 368–018M M 368–018C C 368–018SC SC 368–020C C 368–023SF SF 368–023F F 368–023M M 368–023C C 368–023SC SC 369–025C C 379–016F F 379–016M M 379–016C C 379–018SF SF 379–018F F 379–018M M 379–018C C 379–023SF SF 379–023F F 379–023M M 379–023C C 379–023SC SC Interproximal 392–016SF SF 392–016F F 392–016M M Flat End Cylinder 835–008C C 835–010M M 835–012M M 835–012C C 835–014M M 836–012SF SF 836–012M M 836–014M M 836–014C C 837–012M M 837–012C C 837–014M M 837–014C C 837–014SC SC 837–016M M 837–016C C 837–018M M 837–018C C Round End Cylinder 838–009M M Flat End Taper 847–014F F 847–014M M 847–014C C 847–016F F 847–016M M 847–016C C 847–018M M 848–010M M 848–016M M 848–016C C 848–016SC SC 848–018C C 848–018SC SC
Henry Schein
Brasseler USA
Meisenger
Axis
SS White
Midwest
Premier
Neo
112–5177 112–5178 – 112–5179 112–5185 112–5181 112–5126 – 112–5182 – – – 112–5184 112–5127
– 004161U0 004781U0 004162U0 004782U0 004163U0 004783U0 – 004164U0 004784U0 – – – –
– 801–012 801G–012 801–014 801G–014 801–016 801G–016 – 801–018 801G–018 – – – –
– M801–012 C801–012 M801–014 C801–014 M801–016 C801–016 – M801–018 C801–018 – – – –
– – – 91002 – – – – 91003 91004 – – – –
– 471010 471019 471011 471020 471012 471021 – 471013 471022 – – – –
– – 115C – – – 120C – – 125C – – – –
– 0112M – – – 0116M 0116C – 0118M 0118C – – – –
112–5186 – 112–5187 112–5190 112–5188 –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
112–5191 112–5192 112–5192 112–5193 – – 112–5206 112–5207 112–5208 112–5196 – 112–5199 – 112–5201 112–5205
– – – – – – – 004236U0 – – – – – – –
– – – – 805G–016 – 807–014 807–016 – – – – – – –
– – – – C805–016 – – M807–016 – – – – – – –
– – – – 91012 – – – – – – – – – –
– – – – – – – 471055 – – – – – – –
– – – – 315.1.75C – – – – – – – – – –
– – – – 0316C – – – – – – – – – –
112–5202 112–5200
004797U0 004225U0
806G–012 806–014
C806–012 M806–014
91016 –
– –
390.3C –
– –
112–5128 112–5129 112–6242 112–6243 112–5214 – 112–5213 –
017277U0 – 017278U0 012925U0 – – – –
811G–033 – – – – – – –
C811–033 – C811–037 SC811–037 – – – –
– – – – – – – –
471060 – 471061 471063 – – – –
230C – 234C – – – – –
2133C – 2137C – – – – –
– –
004954U0 –
– –
M830L–012 –
– –
– –
– –
– –
112–5174 112–5102 112–5173 112–5103 – – 112–5104 112–5105 112–5106 112–5108 112–5109 112–5110 112–5113 112–5114 112–5115 112–5117 112–5118 112–5175 112–5119 112–5296 112–5121 112–5122 112–5123 112–5124
– – – – – – 005256U0 004960U0 004085U0 004768U0 015169U0 – 004965U0 – – – 017165U0 004092U0 – 005258U0 004967U0 004093U0 013889U0 –
– – – – – – – – – – – – – – – – – – – – – – – –
SF368–018 F368–018 M368–018 C368–018 – – SF368–023 F368–023 M368–023 C368–023 SC368–023 – F379–016 – – – F379–018 M379–018 C379–018 SF379–023 F379–023 M379–023 C379–023 –
– – – – – – – 91143 – – – – – – – – – – – – – – 91142 –
– – – – – – 471414 471415 471416 471417 471418 – 471422 – – – 471423 471424 – 471399 471400 471427 471428 –
– – – 290.4C – – – – – 285.5C – – – – – – – – 290.4C – – – 287.4C –
– – – – – – 3923VF 1923F 1923M 1923C – – – – – – 1908F – 1908C 3900VF 1900F 1900M 1900C –
– 112–5125 –
005281U0 004969U0 –
– – –
SF392–016 F392–016 –
– – –
471447 471448 –
– 203.5F –
– 1416F –
– 112–5219 112–5220 112–5222 112–5221 – 112–5223 – 112–5224 – – 112–5225
– 004345U0 – 004810U0 – – – – – 004368U0 004818U0 004369U0 004819U0 – 004370U0 004820U0 – –
– 835–010 – 835G–012 – – – – – 837–012 837G–012 837–014 837G–014 – 837–016 837G–016 – –
– M835–010 – C835–012 – – – – – M837–012 C837–012 M837–014 C837–014 – M837–016 C837–016 – –
– – – 91032 – – – – – – 91035 – 91036 – – 91037 – –
– – – – – – – – – 471086 471089 471087 471090 – 471088 471091 – –
– – – 514.3C – – – – – – 515.7C – 515.8C – – 516.7C – –
– 0710M – 0712C – – – – – – 0712.7C – – – – 0716.8C – –
– 112–5226 – 112–5227 112–5218
–
–
–
–
–
–
–
– – – – 112–5232 112–5138 112–5233 – 112–5234 – – 112–5236 –
– – 004836U0 – 004418U0 004837U0 – – 004425U0 004842U0 – – –
– – 847G–014 – 847–016 847G–016 – – 848–016 848G–016 – – –
– – C847–014 – M847–016 C847–016 – – M848–016 C848–016 – – –
– – 91055 – – 91056 – – – 91058 – – –
– – 471128 – 471125 471129 – – 471154 471158 – – –
– – 702.8C – – 722.8C – – 722.10M 722.10C – – –
– – 0914.8C – 0916.8M 0916.8C – – 0916.10M 0916.10C – – –
Diamond Burs Cross Reference Chart DEFEND Grit Round End Taper 850–010C C 850–012M M 850–012C C 850–012SC SC 850–014M M 850–014C C 850–014SC SC 850–016F F 850–016M M 850–016C C 850–016SC SC 850–018SF F 850–018F F 850–018M M 850–018C C 850–018SC SC 852–010M M 852–010C C 856–012C C 856–012SC SC 856–014M M 856–014C C 856–014SC SC 856–016F F 856–016M M 856–016C C 856–016SC SC 856–018F F 856–018M M 856–018C C 856–018SC SC 856–021C C 856–025C C 856L–014M M 856L–014C C 856–016M M 856L–016C C 856L–016SC SC 856L–018F F 856L–018M M 856L–018C C 856L–018SC SC Needle 858–010F F 858–010M M 858–010C C 858–012F F 858–012M M 858–012C C 858–014F F 858–014M M 858–014C C 859–010F F 859–012F F 859–016F F Flame 860–010SF SF 860–010M M 860–012F F 860–012M M 861–012M M 861–012F F 861–014M M 861–016M M 862–012SF SF 862–012F F 862–012M M 862–012C C 862–012SC SC 862–014SF SF 862–014F F 862–014M M 862–014C C 862–014SC SC 862–016F F 862–016M M 862–016C C 863–010F F 863–010M M 863–012SF SF 863–012F F 863–012M M 863–012C C 863–016F F 863–016M M 863–016C C 863–018M M Gingival Curettage 877K–012M M 878K–012M M 878K–012C C 878K–016M M 878K–016C C Beveled Cylinder 877–010M M 877–010C C 878–012M M 878–012C C 878–014M M 878–014C C 879–012M M 879–012C C 879–014M M 879–014C C 885–010F F 885–010M M 885–010C C 885–012C C 886–012C C 886–014C C 886–016C C
Henry Schein
Brasseler USA
Meisenger
Axis
SS White
Midwest
Premier
Neo
– – 112–5139 – – 112–5140
– – – – – 004850U0
– – 850G–012 – – 850G–014
– – C850–012 – – C850–014
– – – – – –
– – – – – 471174
– – 781.10C – – 781.10C
– – 1112.10C – – 1114.10C
– – 112–5141 – – – 112–5237 112–5238 – 112–5239 – 112–5144 112–5145 112–5147 112–5148 112–5149 112–5150 112–5151 112–5152 112–5153 112–5154 112–5244 112–5155 112–5156 – – – – 112–5158 112–5159 112–5160 – – 112–5161 112–5162
015979U0 – 004851U0 – – – 004450U0 004852U0 – – – 004862U0 – – 004863U0
850F–016 – 850G–016 – ? 850F–018 850–018 850G–018 – – – – – – –
F850–016 – C850–016 – ? F850–018 M850–018 C850–018 – – – C856–012 – – C856–014
– – – – – – – – – – – – – – –
471168 – 471175 – – – 471172 471176 – – – 471207 – – 471208
– – 782.10C – – – – 770.10C – – – 781.8C – – 782.6C
1116.10F – 1116.10C – – – – – – – – 1112.7C – – 1114.8C
005041U0 004488U0 004864U0 004745U0 001734U0 004489U0 004865U0 004746U0 – 004866U0 – – – 005304U0 – – – 005305U0 –
– – – – – – – – – – – – – – – – – – –
F856–016 M856–016 C856–016 SC856–016 F856–018 M856–018 C856–018 SC856–018 – C856–025 – – – C856L–016 – – – C856L–018 –
91116 91068 91069 – 91117 – 91070 – – – – – – – – – – – –
471198 471203 471209 471215 471199 471204 471210 471216 – 471212 – – – 471241 – – – 471242 –
– – 782.8C – – – 770.8C – – 790.8C – – – 770.9C – – – 770.10C –
1116.8F 1116.8M 1116.8C – 1118.7F – 1118.7C – – 2424C – – – – – – – 1118.9C –
– – – – 112–5246 – – – – 112–5165 – –
– – – – – – – 004495U0 004868U0 005046U0 – –
858F–010 – – – – – – 858–014 858G–014 859F–010 – –
F858–010 – – – M858–012 – – M858–014 C858–014 F859–010 – –
– – – – – – – 91071 91072 – – –
– – – – – – – 471251 471253 – – –
– – – – – – – – 207.7C 797.11F – –
– – – – – – – 1314.8M 1314.8C 13212.11F – –
– 112–5255 – – 112–5256
– 004510U0 – – –
– 860–010 – – –
– – – – –
– 91078 – – –
– – – – –
– – – – –
– – – – –
– 112–5258
– – 005374U0 005053U0 004520U0 004878U0 – – 015568U0 – 004879U0 – – – – – – – 005056U0 004529U0 004883U0 – 004530U0 004884U0 –
– – 862C–012 862F–012 862–012 862G–012 – 862C–014 862F–014 – 862G–014 – – – – – – – 863F–012 863–012 863G–012 – 863–016 863G–016 –
– – SF862–012 F862–012 M862–012 C862–012 – SF862–014 F862–014 – C862–014 – – – – F863–010 – – F863–012 M863–012 C863–012 – M863–016 C863–016 –
– – 91128 91121 – 91083 – – – – 91084 – – – – – – – – – 91086 – – 91088 –
– – 471260 471263 471267 471271 – – 471264 – 471272 – – – – – – – – – – – – – –
– – – – – 261.8C – – – – 260.8C – – – – – – – – 797.11M – – – 253.10C –
– – 3512.8VF 1512.8F 1512.8M 1512.8C – – – – 1514.8C – – – – – – – 1512.10F 1512.10M 1512.10C – – – –
112–5294 112–5288 – 112–5290
– – – – 005317U0
– – – – –
– – – – C878K–016
– – – – –
– – – – 471326
– – – – 253.8C
– – – – 1716.8C
112–5266 – 112–5267 112–5169 112–5268 112–5269 112–5271 – 112–5272 112–5273 – 112–5280 – – – – 112–5284
– – 004560U0 004890U0 – 004891U0 – – – – – – – 004899U0 – 012181U0 004901U0
– – 878–012 878G–012 – 878G–014 – – – – – – – 885G–012 – 886–012 886G–016
– – M878–012 C878–012 – C878–014 – – – – – – – C885–012 – M886–012 C886–016
– – – – – – – – – – – – 91104 91105 – – 91106
– – 471304 471307 – 471308 – – – – – – – 471352 – – –
– – – 511.8C – 244.10C – – – – – – 248.8C 251.8C – – –
– – – 1800.8C – 1804.8C – – – – – – – 1812.8C – 1812.10M –
112–5259 – 112–5260 – – – – 112–5261 – 112–5167 – 112–5263 – 112–5262 112–5168 – 112–5264 –
www.defend.com
10
Mydent Affiliations: With Autism rates estimated as high as 1 in 91 children, Mydent feels compelled to take action. That is why a portion of the profits from every DEFEND product sold will go to Autism Speaks. Founded in 2005, Autism Speaks has quickly grown to become the nation’s largest and most effective autism science and advocacy organization. They are dedicated to funding global biomedical research into the causes, prevention, treatments, and cure for autism. Mydent is proud to play a small part in helping them to change the future for all who struggle with autism spectrum disorders. We urge you to learn more at www.autismspeaks.org.
Mydent International is a proud supporter of OSAP, the Organization for Safety, Asepsis and Prevention. OSAP advocates for the safe and infection-free delivery of oral care. OSAP targets its message to dental and other healthcare professionals, academia, consultants, researchers and organizations that include non-governmental organizations (NGOs), government agencies, and even manufacturing and distribution companies -- it's a trusted resource for everyone who is responsible for safe dental care...because safety matters! Learn more at www.osap.org. Mydent International is an accredited business with the Better Business Bureau (BBB) and has a prestigious A+ rating. Since 1985, we have committed ourselves to providing ethical business practices, honest advertising and safeguarding customer privacy.
Mydent is also becoming an industry leader in environmentally responsible manufacturing and distribution practices. We are committed to a reduction of our carbon footprint, using earthfriendly materials and processes wherever possible. From recyclable and reduced packaging, high order practices, reducing emissions as well as “green” practices at our own headquarters, we are committed to a philosophy of being environmentally responsible…Today and Tomorrow.
Mydent International is proud to be a longtime member of the Dental Trade Alliance. The DTA is an association of companies that provide dental equipment, supplies, materials and services to dentists and other oral care professionals. Our member companies are distributors, dental laboratories & manufacturers located in the United States, Canada and Mexico. By providing the best equipment, materials and services to dentists and oral care professionals, we are partners in improving the oral health of everyone.
Our Brand Promise “To provide the healthcare professional with the highest quality infection control products, disposables, preventatives and impression material systems at affordable prices, supported by Superior Service and 100% Customer Satisfaction.”
80 Suffolk Court, Hauppauge, NY 11788 800.275.0020 • FAX: 631.434.7750 Ph: 631.434.3190 • EMAIL:
[email protected]
www.defend.com
JOIN OSAP.ASAP The Organization for Safety, Asepsis and Prevention (OSAP) is the world’s leading advocate and trusted advisor for the safe and infection-free delivery of oral health care. The Safest Dental Visit™ is OSAP’s latest infection control educational program. As an authority on infection control, OSAP has developed this program to help dental practices: IS A PROUD MEMBER OF
• Offer patients The Safest Dental Visit™ - elevating their confidence in the practice • Engage staff in a “culture of safety” • Enhance the overall image of the practice
It’s Like Having an Infection Control Partner! Visit: www.osap.org 1st Edition 2016