ISO/IEC IN THE FIELD. OF CONFORMITY ... GOST R ISO/IEC 17000-2009 CA –
Vocabulary and generals principles. GOST R ... GOST R ISO/IEC 17030-2007.
1
THE DEVELOPMENT OF NATIONAL CONFORMITY ASSESSMENT SYSTEM BASED ON INTERNATIONAL STANDARDS ISO/IEC IN THE FIELD OF CONFORMITY ASSESSMENT DR., PROF. I. ARONOV, HEAD OF DEPARTMENT ON CONFORMITY ASSESSMENT RUSSIAN RESEARCH INSTITUTE FOR CERTIFICATION, DEPUTY HEAD of TC ON STANDARDIZATION “CONFORMITY ASSESSMENT”, CASCO EXPERT
2
WHAT ARE THE ORIGIN AND NATURE OF NON-TARIFF OBSTACLES IN INTERNATIONAL TRADE? REQUIREMENTS RELATED TO PRODUCTS IN TECHNICAL REGULATIONS (TRs) AND STANDARDS (STs) CONFORMITY ASSESSMENT PROCEDURES
WHAT IS HAPPINING IF YOU PLAY NOT BY RULES
3
WTO PRINCIPLES TO AVOID THE TECHNICAL BARRIERS HARMONIZATION AND EQUIVALENCE NON-DISCRIMINATION TRANSPARENCY
4
CONFORMITY ASSESSMENT (CA) PROCEDURES CONFORMITY ASSESSMENT PROCEDURES ARE ANY PROCEDURES USED DIRECTLY OR INDIRECTLY TO DETERMINE THAT RELEVANT REQUIREMENTS IN TRs OR STs ARE FULFILLED SOURCE: TBT AGREEMENT BY WTO
5
6
EXAMPLES OF CA PROCEDURES
CERTIFICATION OF CONFORMITY
SUPPLIER’S DECLARATION OF СОNFORMITY TESTING
7
INTERNATIONAL LEVEL FOR DEVELOPING STANDARDS AND GUIDELINES FOR CA PROCEDURES
ISO COUNCIL COMMITTEE ON CONFORMITY ASSESSMENT
STRUCTURE OF CASCO
8
9
THE MAIN GOALS OF CASCO ACTIVITIES ANALYSIS OF METHODS FOR CA OF PRODUCTS, PROCESSES, SERVICES OF REQUIREMENTS OF THE STs
PREPARATION OF INTERNATIONAL STs AND GUIDELINES FOR TESTING, CERTIFICATION OF PRODUCTS, PROCESSES AND SERVICES, AS WELL AS THE ASSESSMENT OF ACCREDITATION PROMOTING MRAs AND THE DEVELOPMENT OF REGIONAL AND NATIONAL CA SYSTEMS
10
NATIONAL LEVEL FOR DEVELOPING STANDARDS FOR CA PROCEDURES
11
STRUCTURE OF THE TECHNICAL COMMITTEE "CONFORMITY ASSESSMENT" TC «CA»
Fundamentals of CA
Accreditation
CA
WG “COORDINATION”
CA of electric equipment
MEMBERS OF TC "CONFORMITY ASSESSMENT" THE REGULATORS (STATE SURVEILLANCE AUTHORITIES)
THE NATIONAL ACCREDITATION BODY THE INDUSTRIES (GOVERNMENT AND NONGOVERNMENT ENTERPISES) THE SCIENTIFIC AND RESEARCH INSTITUTES
THE CERTIFICATION BODIES
12
13
THE MAIN GOALS OF THE NATIONAL STANDARDS SYSTEM UNIFIED APPROACH TO CONDUCTION OF CA PROCEDURES FOR DIFFERENT USERS PROMOTION OF THE CONFORMITY ASSESSMENT PRACTICES OPTIMIZATION OF THE CA PROCEDURES
TRUST TO RESULTS OF CA
STRUCTURE OF THE NATIONAL STANDARDS SYSTEM THE 1-ST GROUP - NATIONAL STs DEVELOPED DIRECTLY (FULLY OR PARTIALLY) ON THE BASE OF INTERNATIONAL STs THE 2-ND GROUP - NATIONAL STs OF ELECTRICAL EQUIPMENT HARMONIZED WITH THE DOCUMENTS OF THE IEC THE 3-RD GROUP - NATIONAL STs, ESPECIALLY DEVELOPED FOR IMPLEMENTATION THE ADOPTED TECHNICAL REGULATIONS THE 4-TH GROUP - NATIONAL STs ESPECIALLY DEVELOPED FOR VOLUNTARY CERTIFICATION OF PRODUCTS, SERVICES
14
15
NATIONAL STs FULLY HARMONIZED WITH INTERNATIONAL STs ISO/IEC №
Standard name
GOST R ISO/IEC 17000-2009
CA –Vocabulary and generals principles
GOST R ISO/IEC 17007-2011
CA – Guidance for drafting normative documents suitable for conformity assessment
GOST R ISO/IEC 17011-2009
CA – General requirements for accreditation bodies accrediting conformity assessment bodies
GOST R ISO/IEC 17020-2010
CA – General criteria for the operation of various types of bodies performing inspection
GOST R ISO/IEC 17021-2008
CA – Requirements for bodies providing audit and certification of management systems
16
№
Standard name
GOST R ISO/IEC 17024-2011
CA – General requirements for bodies operating certification of persons
GOST R ISO/IEC 17025-2009
CA – General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17030-2007
CA – General requirements for third party marks of conformity
GOST R ISO/IEC 17040-2010
CA – General requirements for peer assessment of CAB and AB
GOST R ISO/IEC 17050-1-2009
CA – Supplier’s declaration of conformity – Part 1. General requirements
GOST R ISO/IEC 17050-2-2009
CA – Supplier’s declaration of conformity – Part 2. Supporting documentation
GOST R ISO/IEC 65:96
CA – General requirements for bodies operating product certification systems
17
EXAMPLE OF NATIONAL STANDARD WHITCH ARE SPECIFIED CA FOR PRODUCTION
GOST R 53063-2009 “CONFORMITY ASSESSMENT. PRODUCT CERTIFICATION SCHEMES OF THE RUSSIAN FEDERATION”
EXAMPLE OF SCHEMES CERTIFICATION FOR INNOVATIVE PRODUCT
TYPE 10
TYPE 9
18
TYPE 8
Scheme type 8 = analysis of the design documentation Scheme type 9 = analysis of the design documentation + model test
Scheme type 10 = analysis of the design documentation + model test + test of one or more samples of product
19
CONCLUSION The developing the national standards system for CA on the base of CASCO international documents provides: to accelerate the elaboration of domestic standards to reduce unnecessary barriers in the trade to promote MRAs
