Edwards 6000-MP 6000-MPAMP 6000-MP-DMIC 6000-MP-DSUM ...

6 downloads 130 Views 135KB Size Report
6000-MP-DSUM Dual Stereo Summing Input Module. Provides auxiliary level inputs from two stereo sources. 6000-MP Series. FEATURES. > Made in USA.
PUBLIC ADDRESS SYSTEMS

Mixer Preamplifier & Input Devices Cat. No. 6000-MPAMP

6000-MP Series FEATURES

www.leedan.com [email protected] Toll-Free: 800-231-1414

> Made in USA

The Edwards Mixer Preamplifier Catalog 6000-MPAMP has the ca-

> Master/satellite architecture > Low distortion and noise > Priority muting

pacity to accept up to eight programmed inputs using Edwards Input modules and a bridging transformer input. The bridging input allows parallel operation with another 6000-MPAMP. The unit's modular concept enhances the ability of the system designer to

> Protective polycarbonate overlay

package the Mixer Preamplifier to specific design criteria.

> Color-coded, calibrated LED level display

The 6000-MPAMP circuity maintains low distortion (THD) and high

> Rack mount or table top AGENCY APPROVALS > UL 813 Listed for Commercial Sound

signal-to-noise ratio. The Mixer/Preamplifier has dual, single-ended outputs that can be converted into an active, balanced output. The dual outputs are desirable for driving individual channel amplifiers. The 6000-MPAMP allows for priority muting. The unit can be mounted in any standard 19" (48.3cm) equipment rack. For 42" wall cabinet mounting, order Cat. No. 6000-MR-42; for 21" wall cabinet mounting, order Cat. No. 6000-MR-21. The removal

SPECIFICATIONS

of the unit's mounting brackets allow for table top mounting. The

> Rated output:

6000-MPAMP has eight individual volume controls, bass and treble control, master volume control, lighted AC power switch and a tone

– 6V RMS dual single-ended output (+18.0dBm)

control bypass switch. The front panel is covered by a protective

– 12V RMS active balanced output (+18.0dBm)

Input Modules

> 600 ohm output load impedance > 120 V AC, 60Hz, 6 Watts

6000-MP-DMIC Dual Mic/Aux Input Module Provides two inputs, each selectable for transformer isolated, low impedance microphone or auxiliary. 6000-MP-DSUM Dual Stereo Summing Input Module Provides auxiliary level inputs from two stereo sources.

17-2

D-04

> -10C to +60C (12F to 140F)

polycarbonate overlay.

90 Fieldstone Court | Ph: 203.699.3300 |

Cheshire, CT 06410 Fx: 203.699.3108

www.edwards-signals.com

© Copyright 2004 Edwards

PUBLIC ADDRESS SYSTEMS TECHNICAL INFORMATION www.leedan.com [email protected] Toll-Free: 800-231-1414 19" (483mm)

11" (159mm)

3 1/4" (89mm)

Cat. No. 6000-MPAMP 4 3/4"" (121mm)

3" (76mm)

3" (76mm)

Cat. No's. 6000-MP-DMIC, 6000-MP-DSUM

Cat. No.

Description

Power Requirements

Frequency Response

Input Sensitivity

Impedance

Noise Levels

6000-MPAMP

Mixer preamp

120V AC 60 Hz

20 Hz to 20 KHz (+/- 1/2 dB)

Input Module Dependent

Input Module Dependent Bridging= Approx. 6k ohms

Mic: >-60 dB Aux: >-65dB Master Control Off: >-85 dB

6000-MP-DMIC

Dual Mic/Aux Input Module

+/- 15V DC @ 10mA

20 Hz to 20 KHz (+/- 1 dB)

Mic: 300microV Aux: 0.1V or 1V

Mic: 150 ohms to 200 ohms, transformer isolated Aux: 10k ohms

SNR Ratio Mic: ≥60dB Aux: ≥65dB

6000-MP-DSUM

Dual Stereo Summing Input Module

+/- 15V DC @ 10mA

20 Hz to 20 KHz (+/- 1 dB)

500mV

100k ohms

SNR Ratio: 75dB (20Hz-20KHz band limiting)

Cat. No. 6000-MP-DMIC

Cat. No. 6000-MP-DSUM D-04

90 Fieldstone Court | Ph: 203.699.3300 |

Cheshire, CT 06410 Fx: 203.699.3108

www.edwards-signals.com

17-3

© Copyright 2004 Edwards