English - Accredited Laboratories - Standards Council of Canada

8 downloads 314 Views 212KB Size Report
Jul 18, 2013 ... Tests. ASTM A370, ASTM A450,. ASTM A530, ASME SA-370,. ASME SA-450, ASME SA-530. Test Method for Flattening and Flaring of Metallic.
Standards Council of Canada

Conseil canadien des normes

600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada

55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada

SCOPE OF ACCREDITATION Exova Canada Inc. BURLINGTON LABORATORY 1440 Grahams Lane, Unit #11 Burlington, ON L7S 1W3 Accredited Laboratory No. 65 (Conforms with requirements of ISO/IEC 17025:2005)

CONTACT: TEL: FAX: EMAIL: URL:

Roger Graham (905) 631-7785 (905) 631-7786 [email protected] http://www.exova.com

CLIENTS SERVED:

All interested parties

FIELDS OF TESTING:

Chemical/Physical, Mechanical/Physical

SCOPE ISSUED ON:

2017-09-24

ACCREDITATION VALID TO:

2021-12-12

METALLIC ORES AND PRODUCTS Articles of Metal: All Forms, Articles of Metal (Chemical Analysis) ASTM E1019 (CHEM-20, CHEM-21) Standards Council of Canada

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and 1

Standards Council of Canada Accredited Laboratory No. 65

CHE-1

CHEM-1004

CHEM-20

CHEM-20

Cobalt Alloys by Various Combustion and Fusion Techniques Chemical Analysis of Carbon, Low-Alloy & Stainless Steel and Aluminum and Aluminum Alloys by OES (Optical Emission Spectroscopy) Quantitative Analysis of: (ASTM E1251, E1086 & E415 Modified) Aluminum Alloys Carbon and Low Alloy Steels Copper (Modified) Nickel Alloys Stainless Steels Analysis of Metals and Metal Alloys - THERMO ICAP 6500 (ASTM D1976 Modified) Aluminum Alloys Carbon and Low Alloy Steels Cast Irons Cobalt Alloys Copper and Brass Alloys Magnesium Alloys Nickel Alloys Stainless Steels Titanium Alloys Tool Steels Zinc Alloys Analysis of Oxygen, Nitrogen and Hydrogen by Eltra ONH2000Combustion (ASTM E1409, E1447, & E1937 Modified) Analysis of Titanium Analysis of Oxygen,Nitrogen and Hydrogen by Eltra ONH2000Combustion (ASTM E1019 Modified) Analysis of Hydrogen in Steel and Ferrous Alloy

(Coating and Plating) ASTM A90 / A90M

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

(Fastener Testing) ASTM F606

ISO 898-1 (Only for: Tensile Testing, Proof Load and Rockwell Hardness), ISO 898-2 SCOPE OF ACCREDITATION

Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel

2

Standards Council of Canada Accredited Laboratory No. 65 (Only for: Proof Load and Rockwell Hardness), ASTM F606, ASTM A370 (Mechanical) ASTM A370, ASTM A450, Test Method for Flattening and Flaring of Metallic ASTM A530, ASME SA-370, Materials ASME SA-450, ASME SA-530 ASTM E23, ASTM A370 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials ASTM E290 Standard Test Methods for Bend Testing of Material for Ductility ASTM E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal ASTM E646 Standard Test method for Tensile Strain - Hardening Exponents (n-Value) of Metallic Sheet Materials ASTM E8 / E8M, ASTM B557 / Standard Test Methods for Tension Testing of Metallic 557M, ASTM A370, JIS Z2241, Materials ISO 6892-1 CSA G40.20 General Requirements for Rolled or Welded Structural Quality Steel/Structural Quality Steel (Metallurgical) ASTM E18

Standard Test Methods for Rockwell Hardness of Metallic Materials

Notes: CAN-P-4E (ISO/IEC 17025): General Requirements for the Competence of Testing and Calibration Laboratories (ISO/IEC 17025-2005) CHEM/CH-1: In house procedures, chemical analysis MET: In house procedures, metallurgical properties

Chantal Guay, ing., P. Eng, Accreditation Services Date: 2017-09-24 Number of Scope Listings: 16 SCC 1003-15/106 SCOPE OF ACCREDITATION

3

Standards Council of Canada Accredited Laboratory No. 65 Partner File #0 Partner: None

SCOPE OF ACCREDITATION

4