N/A. Supplies/Disposables: N/A. N/A. Chemicals: N/A. N/A. Air Emissions: Internal Combustion. Operate Compressor Engine
Plan · Do · Check/Act
Environmental Aspects Background and Exhibits In Module 1, you defined the scope of your facility’s EMS, in Module 3, you drafted your facility’s policy that included commitments for continual improvement and prevention of pollution, and in Module 4, you identified the legal requirements and voluntary commitments that apply to your facility. In Module 5, you will use all that information as you identify the environmental aspects associated with your facility and determine the subset of these aspects that have significant impacts. The outcome of Module 5’s activities will be your list of significant environmental aspects (SEAs), upon which all of your subsequent objectives and targets, environmental management programs (EMPs), operational controls, monitoring and measurement, training, etc., will be based within your EMS.
Definitions and Relationships An environmental aspect is defined as an element of a facility’s activities, products, or services that can or does interact with the environment. These interactions and their effects may be continuous in nature, periodic, or associated only with events, such as emergencies. An environmental impact is defined as any change to the environment, whether adverse or beneficial, resulting from a facility’s activities, products, or services. A significant environmental aspect is one that may produce a significant environmental impact. In short, the aspect is the cause and the impact is the effect. Exhibit 5-1: Cause and Effect — Environmental Aspects and Environmental Impacts, provides examples of this relationship.
Exhibit 5-1: Cause and Effect— Environmental Aspects and Environmental Impacts
Environmental Aspect Ö Emissions of volatile organic Ö compounds (VOCs) Discharges to stream Ö Spills and leaks Ö Electricity use Ö Use of recycled paper Ö
Environmental Impact(s) Air pollution, smog Degradation of aquatic habitat and drinking water supply Soil and groundwater contamination Air pollution, global warming Conservation of natural resources
Module Environmental Aspects
5-1
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Techniques and Data Sources for Identifying and Evaluating Environmental Aspects As shown in Exhibit 5-2: Selected Techniques and Data Sources for Identifying and Evaluating Environmental Aspects and Impacts, there are numerous techniques and data sources to assist you in identifying and evaluating environmental aspects and impacts at your facility. You may already have experience using some of these techniques at your shipyard. Note that much of the data you have collected to date will be useful as you identify environmental aspects and determine their significance.
Exhibit 5-2: Selected Techniques and Data Sources for Identifying and Evaluating Environmental Aspects and Impacts Techniques and Data Sources Emission Inventories
Environmental Compliance Audits Environmental Cost Accounting Environmental Impact Assessments Environmental Property Assessments Failure Mode and Effects Analyses Life Cycle Assessments Pollution Prevention or Waste Minimization Audits Process Flow Diagrams Process Hazard Analyses Project Safety/Hazard Reviews Risk Assessments
When Best Used Used to quantify emissions of pollutants to the air. Some data on emissions or chemicals of concern may already be available to you, based on EPCRA requirements and Clean Air Act (CAA) Title V permitting program data requirements. Used to assess compliance with federal, state, and local environmental regulations. These methodologies are in common use. Their scope and level of detail vary. These are not typically directed at examining environmental impacts (particularly for products). Used to assess the full environmental costs associated with activities, products, or services. Emerging protocols require comprehensive assessments to quantify such costs. Used to satisfy requirements of the National Environmental Policy Act (NEPA) regarding the evaluation of environmental impacts associated with proposed projects. Methodology in common use, but not typically used to assess environmental impacts associated with existing operations. Used to assess potential environmental liabilities associated with facility or business acquisitions or divestitures. The scope and level of detail is variable. These assessments typically do not assess impacts associated with products or services. Commonly used in the quality field to identify and prioritize potential equipment and process failures as well as to identify potential corrective actions. Often used as a precursor to formal root cause analyses. Used to assess the cradle-to-grave impacts of products or processes, from raw material procurement through disposal. Life-cycle methodologies are somewhat subjective and can be resource intensive. These methodologies are described in ISO 14040-14048. Used to identify opportunities to reduce or eliminate pollution at the source and to identify recycling options. Requires a fairly rigorous assessment of facility operations. These audits typically do not examine off-site impacts. Used to allow an organization to visualize and understand how work gets accomplished and how its work processes can be improved. Used to identify and assess potential impacts associated with unplanned releases of hazardous materials. Methodology in common use due to Occupational Safety and Health Act (OSHA) Process Safety Management regulations. Typically employs team approach to identify and rank hazards. Used to assess and mitigate potential safety hazards associated with new or modified projects. Methodologies in common use. Typically do not focus on environmental issues. Used to assess potential health and/or environment risks typically associated with chemical exposure. Variety of qualitative and quantitative methodologies in common use.
A recommended approach, which is described in detail below, is based on creating process flow diagrams. This approach is recommended because it will give you a thorough understanding of all of your facility’s processes.
Module 5-2
Environmental Aspects
Plan · Do · Check/Act
The Process Flow Diagram
Technique Process flow diagrams allow facilities to visualize and understand how processes work and how they might be improved. As illustrated in Examples 5-1 through 5-21 later in this module, a process flow diagram visually depicts: • Inputs of the process or activity, which include energy and other resources consumed and raw materials and chemicals used; • Step-by-step process flows; • Decision points (e.g., on alternate methods); and • Process outputs, which include products or services, air emissions, noise, odor, radiation, wastewater discharges, solid waste, and hazardous wastes. As an EMS tool, they help facilities to identify inputs (such as chemicals, raw materials, and other resources used), outputs (including products, wastes, air emissions, etc.), and decision points and interactions with other processes, and thereby help to identify environmental aspects and impacts. Using this technique to identify environmental aspects involves the following tasks, each of which is described in greater detail below: • Subdividing your facility into appropriate units, i.e., activities and processes, for subsequent environmental aspects data collection; • Developing process flow diagrams, which are essentially material balance sheets (of all inputs and outputs) of the activities and processes; • Identifying environmental aspects by transferring the input and output information from the process flow diagrams to environment aspect identification forms; • Determining SEAs by evaluating the identified environmental aspects against pre-established significance determination criteria to arrive at the list of SEAs, upon which other elements of an EMS will be based;
• Documenting your approach to environmental aspects identification and significance determination in a written procedure; and • Reviewing and revising environmental aspects over time.
Subdividing Your Facility into Appropriate Units The appropriate level of subdivision will be one that balances the need to capture all relevant input/output information with a desire to avoid having too much unwieldy information, much of which might be redundant. Also keep in mind that the scheme for subdividing the facility should mirror how the facility is divided in terms of staffing and supervision. The people who manage and work in these areas will ultimately take ownership of the SEAs, work instructions, and monitoring and measurement that result from this process. Exhibit 5-3: A List of Common Activities and Processes with Functional Areas at Shipbuilding and Ship Repair Facilities, identifies more than 25 common activities and processes across 6 general functional areas at a typical shipbuilding and ship repair facility. Remember to look at services as well as products. While the need to examine on-site operations might be obvious, you also should consider identifying aspects of activities that might be done off-site (such as servicing equipment at a customer’s site). Similarly, the environmental aspects of the products, vendors, and contractors you use may be less obvious, but many will be appropriate to consider. Aspects may also result from past activities, such as spills. You may want to refer to the defined scope of your EMS (see Module 1) in determining the set of processes and activities for which aspects will be identified.
Module Environmental Aspects
5-3
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Exhibit 5-3: A List of Common Activities and Processes with Functional Areas at Shipbuilding and Ship Repair Facilities Activity and Process Drydock Painting Small Parts Coating, Outdoor Gas Metal Arc Welding Dry Abrasive Blasting Burning and Cutting High Pressure Water Jetting Metal Grinding Material Transport, Crane Metal Working Bilge Cleaning Fiberglass Reinforced Construction Other Painting, Coating, and Plating Pipe Fabrication, Aluminum Fabrication, Steel Fabrication Metal Plating and Surface Finishing Other Machining and Metal Working General Repairs Storage of Materials and Waste: paint and solvents, metals, hydraulic fluids, lube oils, paint waste, blasting media, welding gases, universal waste, diesel, fuel, gasoline Hazardous Waste Disposal Universal Waste Disposal Wastewater Disposal Wastewater Treatment Fuel Storage and Transfer Electrical Generation Compressed Air Generation Steam Generation Administration
Developing Process Flow Diagrams Use a team to diagram the inputs and outputs of the activities and processes into which you have subdivided your facility. At a minimum, the team should include the process “owner.” Probably it should also include members of the Cross Functional Team (CFT) who have become specialists in environmental aspect identification.
Identifying Environmental Aspects If you have done a thorough job of diagramming the inputs and outputs of all of the appropriate activities and processes at your facility, the next step is easy. Transfer the information from each flow
Functional Area
Construction and Repair
Maintenance Raw Materials Management and Waste Accumulation Waste Disposal and Treatment
Maintenance and Operation
General Support
diagram onto a separate environmental aspect identification form (such as the one provided with Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) as Identification and Significance Determination of Environmental Aspects and Setting Objectives and Targets (Aspects Form) (EF-003.01)) for each process or activity. This information should be arranged on the environmental aspect identification form by input subcategory (e.g., supplies, chemicals, energy use, or water use) and by output subcategory (e.g., air emissions, noise/odor/radiation, water discharges, solid/residual wastes, storm water discharges, or spills). Having these subcategories on the form should reduce the likelihood of mistakenly neglecting relevant aspect information.
Module 5-4
Environmental Aspects
Plan · Do · Check/Act
Determining Significant Environmental Aspects Determining which aspects have significant impacts, and therefore will be included in your EMS as SEAs, is one of the most crucial steps in EMS planning. It can be one of the most challenging as well as one of the most rewarding. Decisions you make in this step will affect many other system elements, such as setting objectives and targets, establishing operational controls, and defining monitoring needs. Careful planning of this activity will pay dividends later. Determining which aspects are significant involves some subjective decisions. For this reason, you will achieve more balanced results by having a CFT that represents different job functions. This will provide a cross-section of operational experience and different perspectives. Your CFT should carefully define the criteria that will be used to determine which environmental aspects are significant. The criteria presented below are intended to achieve a balance between structure and flexibility. They are a starting point that you can use to customize your own criteria. • An obvious initial criterion is whether the aspect is subject to environmental regulationsall of these aspects, as defined by broad scientific and legislative consensus, are significant. A closely related condition is whether an aspect is the subject of facility policy, goals, or voluntary commitments. For example, many facilities have established energy-use, wateruse, or waste reduction goals and targets because it also makes good business sense. If these facility policies/goals apply to your facility, then the associated aspects should be considered significant.
• A second criterion to consider involves the views of interested parties. One of the commitments of your environmental policy must be communication with external stakeholders. There are a variety of community concerns that might affect your designation of a particular activity as a significant aspect. These may include issues other than pollution. Some examples are the noise level or odor produced by your facility; increased traffic caused by your business; and increased light needed for your operations. Aspects that the community considers important (for example, aspects that the community has lodged complaints about) should be labeled as significant in your EMS. • A third criterion is whether the aspect has good technical and financial potential for pollution prevention improvements (such as the reduced use of water, energy, or hazardous materials). Pollution prevention is also included in your environmental policy. The determination that makes for a particular aspect under this criterion is highly subject to the specific circumstances and values of your facility and community. For example, a high rate of water use would be of higher concern in a desert region than in a region where water is more plentiful. The determination that your CFT makes is based on your judgment and your facility’s specific circumstances. • A final criterion is one that your CFT customizes for your facility. A commonly used approach relies on scoring environmental aspects based on magnitude, frequency, toxicity, and duration.
Module Environmental Aspects
5-5
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Where appropriate, individual aspects can be grouped. For example, if energy use is listed as an environmental aspect for several processes, it may also be a facility-wide concern. The CFT could list energy on each process-specific aspect form and then record the aspect and significance determination on a facility-wide form to indicate it as a facilitywide concern. As shown in Exhibit 5-4: Significant Environmental Aspects as a Basis for Operational Controls and Objectives and Targets, SEAs serve as the basis for further planning of your EMS. In a subsequent step, each SEA will be assigned an objective. That is, it either becomes the subject of: controls, which are ongoing; improvements, which have targets that specify how much can be achieved and by when; or an investigation leading to improvements (Module 6), which will have targets that indicate when study results will be issued. Each improvement (and investigation) objective will be associated with an EMP that specifies who is responsible for what outcomes and by when (Module 7). In addition, your facility’s SEAs will have key characteristics that are monitored and measured (Module 14), and also will be the basis for determining where operational controls are required (Module 12).
Documenting Your Approach You need to describe your approach to identifying aspects and determining their significance in the form of a written procedure. You can modify Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003), to develop that procedure. Variations on this procedure are provided in Appendix D— Environmental Aspect/Impact Ranking. Keep the resulting information up-to-date, so that the potential aspects of new activities, products, and services are factored into your targets and objectives (see Module 6) and operational controls (see Module 12).
Reviewing and Revising Environmental Aspects Over Time Regularly revisiting your environmental aspects and objectives, as described in Module 6, is an essential step in developing an EMS that achieves the goal of continuous improvement. The regular review of aspects can be used to change the priorities you set last time, or it can be used to examine a part of your facility’s activities that you set aside last time. The regular review can be part of a planned “phasing in” process, wherein different parts of your facility’s operations are reviewed until all your facility’s activities are included in your EMS. The regular review of aspects is the foundation for your facility’s continuing improvement.
Module 5-6
Environmental Aspects
Plan · Do · Check/Act
Exhibit 5-4: Significant Environmental Aspects as a Basis for Operational Controls and Objectives and Targets
Module Environmental Aspects
5-7
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) 1.0
Purpose This procedure defines [Facility’s Name]’s method for the identification of environmental aspects of its operations and the determination of significance for aspects that have actual or potential significant impacts on the environment.
2.0
Activities Affected All areas and departments
3.0
Forms Used 3.1 Identification and Significance Determination of Environmental Aspects and Setting Objectives and Targets (EF-003.01) 3.2
Environmental Management Programs (EF-003.02)
4.0
References 4.1 Procedure for Environmental Management System Management Review (EP-006) 4.2 Procedure for Emergency Preparedness and Response (EP-007) 4.3 Procedure for Identification of Legal and Other Requirements (EP-001) 4.4 Procedure for Communication with Stakeholders (EP-004) 4.5 Procedure for Environmental Training and Awareness (EP-008) 4.6 Procedure for Monitoring and Measurement (EP-009) 4.7 ISO 14001:1996, Elements 4.3.1, 4.3.3 and 4.3.4
5.0
Definitions 5.1 Environmental Aspect: element of an organization’s activities, products or services that can interact with the environment. 5.2 Environmental Objective: overall environmental goal, arising from the environmental policy, which an organization sets itself to achieve and which is quantified where practicable. 5.3 Environmental Target: detailed performance requirement, quantified where practicable, applicable to the organization or parts thereof, which arises from the environmental objectives and which needs to be set and met to achieve those objectives. 5.4 Environmental Management Program: the means, time frames, and personnel responsible for achieving an objective and target.
6.0
Exclusions None.
Module 5-8
Environmental Aspects
Plan · Do · Check/Act
Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) (continued)
7.0
Procedures 7.1 Procedure for Environmental Aspect Identification 7.1.1 The facility Cross Functional Team (CFT), led by the Environmental Management Representative (EMR) or designee, is responsible for completing the Identification Procedure for and Significance Determination of Environmental Aspects and Setting Objectives Environmental Aspect and Targets (Aspects Form) (EF-003.01) for each core process and supporting activiIdentification ty. If possible, members of the CFT will conduct a physical inspection when completing the form. The completed form is a process flow diagram of a process or Establish Cross activity and is used to identify environmental aspects. Functional Team (CFT) 7.1.2 At a minimum, the CFT will review and revise the completed forms, by means of physical inspection, as necessary at issuance, annually, and before and immediately Determine Core following implementation of new or modified processes/activities. Processes and Supporting Activities 7.1.3 All environmental aspects are evaluated for significance as defined in the section below, Procedure for Determination of Significant Environmental Aspects. Inspect E ach Process/Activity and Create Process 7.1.4 The following procedure is used to fill out the Aspects Form (EF-003.01). Flow Diagram 7.1.5 Creating the process flow diagram consists of identifying all raw materials, chemicals, and utilities used as inputs and all outputs produces as products and byIdentify and Record products. Outputs are all products, wastes produced, recycled materials, water disEnv. Aspects charges, and air emissions known for the process(es). 7.1.6 When identifying inputs and outputs, all modes of operation will be considered beDetermine cause startup, shutdown, or emergency operations might introduce additional Significant Environm ental aspects to the process. When doing the diagrams, the team will make notes of other Aspects potentially useful information such as the quantity or volume used per unit time, where available. These diagrams will be improved over time with specific data to allow material balances in the long term, if this is not possible initially. To assist with these diagrams, the CFT shall consider the following potential inputs and outputs: • Inputs • Supplies: Enter the major, non-chemical supplies used in the process. • Chemical: Enter any chemical materials used in the process. • Energy Use: Enter energy type and usage. (Levels are relative to the facility.) • Water Use: Enter water type (e.g., city, well, storm, process, chilled) and usage. (Levels are relative to the facility.) • Other Inputs: Enter inputs that are not covered clearly in other categories. • Outputs • Air Emissions: List all air emissions whether they are drawn directly through a stack or are discharged into the room and escape as fugitive emissions. • Noise/Odor/Radiation: Include noise and odor as an air emission if potentially noticeable outside the facility and list any potential radiation emitted from the facility.
Module Environmental Aspects
5-9
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) (continued)
• Water Discharges: Enter all wastewater streams that discharge directly to storm or sanitary sewer systems or surface waters. Containerized wastewater should be included in the waste section. • Solid/Residual Wastes: Wastes are any materials intended to be discarded or disposed of, whether regulated or not, and include liquids, solids, and gases. Also include recycled materials, returnable containers, and chemical by-products under this category. • Stormwater Discharges: List all stormwater discharges from all process areas. • Spills: Enter all potential spills that might occur in all process areas. 7.2
Procedure for Determination of Significant Environmental Aspects (SEAs) 7.2.1
7.2.2
Where appropriate, individual aspects can be grouped. For example, if the consumption of energy is listed as an environmental aspect in several areas, the CFT can group these listings such that consumption of energy appears just once on a facility-wide form. The following criteria will be used to determine significance and are listed in the Aspects Form (EF-003.01): 1. Legal Requirements/Voluntary Commitments/Company Policy: Subject to specifically relevant legislation, regulation, and/or permit requirements that address significant impacts to the environment. This will likely include aspects associated with processes and activities if (1) environmental regulations specify controls and conditions, (2) information must be provided to the authorities, and/or (3) there are, or may be, periodic inspections or enforcement actions taken by the authorities. Potential aspects that are subject to environmental regulations in the event of incidents will be recognized as significant when such an event occurs. A closely related condition is whether an aspect is the subject to or associated with environmentally-related facility goals, directives, policies, or subject to or associated with voluntary covenants to which the facility had committed. 2. Community Concern: Subject to or associated with community concerns, such as those previously expressed in the form of complaints or critical inquiry. 3. Pollution Prevention Potential: Based on technical and business conditions, has a high potential for pollution prevention or resource-use reduction. 4. Potential Impact to the Environment: Associated with potential impact to the environment from high environmental loading due to one or more of the following: a. Toxicity (compositional characterization of materials and wastes) b. Amounts (volumes and masses of emissions, waste, or releases) c. Amounts (consumption of renewable and non-renewable resources) d. Frequency of episodes e. Severity of actual or potential impacts (Note: Additional examples of how to determine significance are provided in Appendix D—Environmental Aspects/Impacts Ranking.)
Module 5-10
Environmental Aspects
Plan · Do · Check/Act
Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) (continued)
Using the Significance Determination portion of the Aspects Form (EF-003.01), the CFT, or a subset thereof, shall evaluate, each identified aspect to determine whether it is significant. The environmental aspects will be considered to be “significant” if the aspect has an impact on the environment and meets one or more of the four criteria. For criteria 1 through 4, using your best judgment, backed up by research if possible, put Yes, No, or Not Applicable [NA] in the appropriate column on the Aspects Form [EF-003.01]. If any of the columns are assigned a Yes, indicate “S” for significant in the appropriate column for that aspect. Otherwise, indicate “N” for not significant. Provide the rationale for S or N in the appropriate column on the Aspects Form [EF-003.01]. 7.3
Establishing and Maintaining Objectives and Targets 7.3.1 The CFT shall establish and maintain environmental objectives and targets for all significant aspects. Objectives and targets shall be consistent with the [Facility’s Name] environmental policy and shall be one of three types: control; improve; or investigate. The environmental objectives and targets for each process shall be recorded using the last two columns of the Aspects Form (EF-003.01) for each process. (They can then be summarized on a form similar to Example 6-1: Objectives and Targets Organized by Category, for the facility as a whole. For each SEA, the organization will establish an appropriate objective and target.) There are three types of objectives represented as follows: C I S
= = =
Control or Maintain Improve Study or Investigate
Guidance regarding use of these objectives is provided below for use by the CFT: • Control or Maintain–is an appropriate objective for SEAs that are the subject of environmental regulations because the environmental policy states that we will comply with the law. In these cases, the objective will be to maintain conformance with operational controls, such as procedures and work instructions that apply to those significant aspects. The target will be ongoing. • Improve–is appropriate for SEAs that our facility goals commit us to improving upon. For example, energy- or water-use reductions that are not required by law but fall within our commitment to pollution prevention. Improvement objectives also can be used for SEAs that have regulatory drivers and environmental improvement goals. For example, we have regulatory requirements and fugitive emission reduction goals for our VOC emissions. Copper in storm water effluent is another example because we wish to reduce discharge levels below the limits set in our permits. Thus, the objective for these will be C and I (that is, maintain compliance and reduce emissions). • Study or Investigate–is appropriate in cases where the CFT thinks improvement will be feasible and beneficial, but study is needed to deter-
Module Environmental Aspects
5-11
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) (continued)
7.3.2
7.3.3
7.3.4
7.4
mine how much improvement can be achieved and timeframes that are feasible. The objective will be to study the alternatives by a target date in preparation for later setting an improvement objective (or dropping the objective if the study reveals that the changes are not financially, technologically, or logistically feasible). The CFT is also responsible for developing and recommending potential new environmental objectives to top management. In identifying potential new objectives, the CFT considers the following: • Environmental policy; • SEAs (especially those that pose chemical risk); • Applicable laws and regulations and potential future laws and regulations; • Practical business criteria, such as the potential costs and benefits of pursuing a particular environmental objective and our commitment to pollution prevention; and • The views of employees and other interested parties. When developing and recommending objectives, the CFT should consider the number of columns that were marked Yes on Aspects Form (EF-003.01). These columns relate to the significance criteria established by this EMS (legal/facility requirements, community concerns, pollution prevention potential, and/or potential impact on the environment). Those SEAs with two or more Yes rankings will likely be good candidates for control, improvement, or investigation. Performance against objectives and targets shall be reviewed at least every six months by the CFT and reported at the management review meeting (see EP-006, Environmental Management System Management Review). The management review shall endorse the facility environmental objectives and targets.
Establishing and Maintaining Environmental Management Programs 7.4.1
7.4.2
The CFT shall establish and maintain environmental management programs for achieving the objectives and targets developed for the significant environmental aspects identified and updated every six months. Environmental management programs shall identify the means, time frames and those responsible for achieving associated objectives and targets. Responsibility will be identified at each relevant function and level of the facility.
Module 5-12
Environmental Aspects
Plan · Do · Check/Act
Exhibit 5-5: Procedure for Environmental Aspects, Objectives and Targets, and Programs (EP-003) (continued)
8.0
General Rules 8.1 The CFT shall include representation from all appropriate functional areas and departments. 8.2
The environmental aspects and significant aspects associated with the operations of semipermanent on-site contractors are covered by this procedure.
8.3
Interested parties include employees and the community.
8.4
The environmental management programs that address the following areas should be created if applicable objectives and targets are developed: 8.4.1
Compliance Assurance
8.4.2
Pollution Prevention/Waste Minimization
8.4.3
Energy Management
8.4.4
Materials Management
9.0
Frequency This procedure will be repeated at least annually. More frequent updates will be conducted for new projects or processes that affect the list of the facility’s significant aspects.
10.0
Records The originals of completed Aspects Forms (EF-003.01) are maintained by the EMR or designee.
Record of Revisions Revision Date
Description
Sections Affected
Module Environmental Aspects
5-13
5-14
Spillage and Other:
Stormwater Discharges:
Water Discharges:
Wastes:
Noise/Odor/Radiation:
Air Emissions:
Chemicals:
Supplies/Disposables:
Water Usage:
Category/Aspect Energy Usage:
Inputs, Processes, Outputs, Products
Person Completing Form: ASPECT IDENTIFICATION
Rationale for Significance (S) or Non-significance (N)
Area/Process: SIGNIFICANCE DETERMINATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: OBJECTIVES &TARGETS EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Identification and Significance Determination of Environmental Aspects and Setting Objectives and Targets (Aspects Form) (EF-003.01)
Module
Environmental Aspects
N or S
Potential Impact to the Environment
Pollution Prevention Potential
Community Concern
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
Plan · Do · Check/Act
Examples Process flow diagrams and associated Aspects Forms (EF-003.01) that illustrate how the diagrams can be used to identify and determine the significance of the aspects for 21 common production processes at shipbuilding and ship repair facilities are provided below as Example 5-1: Flow Diagram and Aspects Form for Drydock Painting through Example 5-21: Flow Diagram and Aspects Form for Waste Management. • Example 5-1 provides an example flow diagram and Aspects Form for drydock painting. • Example 5-2 provides an example flow diagram and Aspects Form for small parts coating, outdoor. • Example 5-3 provides an example flow diagram and Aspects Form for dry abrasive blasting. • Example 5-4 provides an example flow diagram and Aspects Form for burning and cutting. • Example 5-5 provides an example flow diagram and Aspects Form for ultra high pressure water jetting. • Example 5-6 provides an example flow diagram and Aspects Form for metal grinding. • Example 5-7 provides an example flow diagram and Aspects Form for material transport, crane. • Example 5-8 provides an example flow diagram and Aspects Form for aluminum fabrication. • Example 5-9 provides an example flow diagram and Aspects Form for steel fabrication. • Example 5-10 provides an example flow diagram and Aspects Form for sheet metal. • Example 5-11 provides an example flow diagram and Aspects Form for ship’s fuel removal. • Example 5-12 provides an example flow diagram and Aspects Form for pipe fabrication. • Example 5-13 provides an example flow diagram and Aspects Form for compressed air. • Example 5-14 provides an example flow diagram and Aspects Form for inside machine shop. • Example 5-15 provides an example flow diagram and Aspects Form for interior ship painting. • Example 5-16 provides an example flow diagram and Aspects Form for paint booth. • Example 5-17 provides an example flow diagram and Aspects Form for steam plant. • Example 5-18 provides an example flow diagram and Aspects Form for supply management. • Example 5-19 provides an example flow diagram and Aspects Form for bilge management treatment and discharge. • Example 5-20 provides an example flow diagram and Aspects Form for wastewater treatment and discharge. • Example 5-21 provides an example flow diagram and Aspects Form for waste management. The process flow diagrams show environmental aspects of the processes, with “inputs, processes, outputs, products” labels that correspond to a column heading of this name on the Aspects Form. You likely will want to review these examples and modify them to meet your facility’s specific conditions. The examples should provide a starting point for understanding how the aspect identification process works and for applying it at your facility. Note that the drydock painting example in Example 5-1: Flow Diagram and Aspects Form for Drydock Painting will be further expanded in Module 6 and Module 7 to illustrate how to proceed from significant aspect determination to setting objectives and targets and establishing Environmental Management Programs.
Module Environmental Aspects
5-15
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-1: Flow Diagram and Aspects Form for Drydock Painting
Coating Inp-1
Transport Coating to Drydock Pro-1
Store Coating on Drydock Pro-2
Thinner Inp-2
Disposables Inp-3
Prepare Coating for Paint (Mix and Thin Pro-3
Transport Prepared Coating to Drydock Worksite Pro-4 Airless Sprayer Meth-2
Brush and Roll Meth-1
Application Method HVLP Sprayer Meth-3
Transfer Paint to Bucket Pro-5
Transfer Paint to Paint Pot Pro-6
Apply Coating to Ship Hull Pro-7 Fugative Air Emissions Out-1 Coated Surface Prod-1
Clean Up Pro-8
Waste Paint Buckets Out-2
Waste Paint & Solvent Out-3
Contaminated Equipment Out-4
Consolidate and Place on Palets Pro-9
Consolidate into Drums Pro-10
Solvent Cleaning Pro-11
Transport to Scrap Yard Pro-14
Transport to Waste Yard Pro-15
Contaminated Disposables Out-6
Contaminated Debris Out-7
Clean Equipment Out-5
Consolidate into Bags and Drums Pro-12
Consolidate into Bags and Drums Pro-13
Store Equipment Pro-17
Transport to Waste Yard Pro-18
Transport to Waste Yard Pro-19
Consolidate Contaminated Solvent into Drums Pro-16
Transport to Waste Yard Pro-20 Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module 5-16
Environmental Aspects
Environmental Aspects Applying Coating (Pro-7) Applying Coating (Pro-7) Applying Coating (Pro-7)
Fugitive HAPs
Over Spray, Fugitive Particulate Emissions Noise/Odor/Radiation: Odor from VOCs Fume Wastes: Contaminated Scrap Waste Paint Cans (Out-1)
Applying Coating (Pro-7)
Virgin Thinners (Inp-2)
Virgin Coatings (Inp-1)
Inp-3 Inp-3 Inp-3 Inp-3 Inp-3
Mix and thin coatings (Pro-3) Transport coatings and waste to dry dock (Pro-1, Pro-14, Pro-15, Pro-16, Pro-18, Pro-19, Pro-20)
Water Usage: N/A Supplies/Disposables: Rags Gloves Tyvek Coverall Filters Sand Paper Chemicals: VOC Content HAP Content VOC Content HAP Content Air Emissions: Fugitive VOCs
Diesel Fuel/Forklift
Energy Usage: Electricity/Paint Mixers
Category/Aspect
Inputs, Processes, Outputs, Products
Quantity or Volume
No
Legal Requirements/ Voluntary Commitments, Company Policy
10,000 lbs per
8 tons
10 tons
40 tons
N/A
No
No
Yes
Yes
Yes
Yes
Yes
No No No No No
1000 gallons No per year
10 kw/ year
Community Concern
No
No
Yes
Yes
Yes
Yes
Yes
No No No No No
No
No
Pollution Prevention Potential
Yes
No
Yes
Yes
Yes
No
No
No No No No No
No
No
Potential Impact to the Environment
No
No
N/A
N/A
N/A
N/A
N/A
No No No No No
No
No
S
N
S
S
S
S
S
N N N N N
N
N
N or S
Waste Reduction Program
Does not meet significance criteria
Marine Coating Rule, permits of operate, toxic air emissions rule Marine Coating Rule, permits of operate, toxic air emissions rule Marine coating rule, coating permits to operate, toxic air emissions rule
Marine Coating Rule, Air Permit
Marine Coating Rule, Air Permit
Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria
Does not meet significance criteria, low volume usage
Does not meet significance criteria, low volume usage
Rationale for Significance (S) or Non-significance (N)
Person Completing Form: John Smith, Paint Department Supervisor Area/Process: Drydock Painting ASPECT IDENTIFICATION SIGNIFICANCE DETERMINATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-1: Flow Diagram and Aspects Form for Drydock Painting (continued)
Module
5-17
5-18
Coating Thinner Spillage
Spillage, Contaminated Scrap
Spillage
Water Discharges: N/A Stormwater Discharge: VOC-contaminated Water Heavy Metal Contaminated Water Spillage and Other:
Consolidate Contaminated Solvent into Drums (Pro-16)
Solvent Cleaning of Equipment (Pro-11)
Consolidate waste paint and solvent (Pro-10)
Transport waste cans, cleaning solvents, contaminated solvents and debris to scrap yard (Pro-14, Pro-18, Pro-19, Pro-20) Consolidate equipment cleaning solvent into drums (Pro-16) Transport coatings and thinners (Pro-1 through Pro-6) Consolidate Waste (Pro9)
Waste Paint and Solvent (Out-2) Consolidate contaminate disposables (Pro-12) and debris (Pro-13)
Waste Chemicals
Solid Waste, Landfill
Tyrex Suites, Rollers, Brushes, Filter Masks, Paint Stirrers, Drop Clothes, Masking Tape (Out-5), Debris (Out-6)
Contaminated Waste
100 gallons Yes per year 50 gallons Yes per year 10 gallons Yes per year
No
No
No
No
No
No
No 5 gallons
No
10 gallons Yes per year
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
5 gallons No per year
N/A
1,500 gallons 10,000 and 5,000 lbs per year
year
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
N/A
N/A
N/A
No
No
N/A
No
N/A
N/A
No
N/A
No
N
S
S
N
N
S
N
S
S
S
S
S
Does not meet significance criteria, low volume of spillage
Volume exceeds “No Spill” Policy limits
Volume exceeds “No Spill” Policy limits
Does not meet significance criteria, low volume of spillage, scrap is recycled
Does not meet significance criteria, low spillage volume
Volume exceeds “No Spill” Policy limits
Does not meet significance criteria, low volume spillage
Storm water permit
Storm water permit
Waste Reduction Program
RCRA (Title C)
Waste Reduction Program
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-1: Flow Diagram and Aspects Form for Drydock Painting (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-2: Flow Diagram and Aspects Form for
Small Parts Coating, Outdoors Prepare Paint Pit for Coating Operations Pro-1
Coating Inp-1
Transport Coatings to Paint Pit Pro-2
Store Coating in Paint Pit Area Pro-3
Thinner Inp-2
Disposables Inp-3
Prepare Coating for Paint (Mix and Thin Pro-4
Transport Prepared Coating to Workarea Pro-5
Airless Sprayer Meth-2 Brush and Roll Meth-1
Application Method HVLP Sprayer Meth-3
Transfer Paint to Bucket Pro-6
Transfer Paint to Paint Pot Pro-7 Apply Coating to Parts Pro-8 Fugitive Air Emissions Out-1 Coated Part(s) Prod-1
Clean Up Pro-9
Waste Paint Buckets Out-2
Waste Paint & Solvent Out-3
Contaminated Equipment Out-4
Consolidate and Place on Pallets Pro-10
Consolidate into Drums Pro-11
Solvent Cleaning Pro-12
Transport to Scrap Yard Pro-15
Transport to Waste Yard Pro-16
Consolidate Contaminated Solvent into Drums Pro-17
Transport to Waste Yard Pro-21
Contaminated Disposables Out-6
Contaminated Debris Out-7
Clean Equipment Out-5
Consolidate into Bags and Drums Pro-13
Consolidate into Bags and Drums Pro-14
Store Equipment Pro-18
Transport to Waste Yard Pro-19
Transport to Waste Yard Pro-20
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module Environmental Aspects
5-19
Over Spray, Fugitive Particulate Emissions
Fugitive HAPs
Water Usage: N/A Supplies/Disposables: Rags Gloves Tyvek Coverall Filters Sand Paper Chemicals: VOC Content HAP Content VOC Content HAP Content Air Emissions: Fugitive VOCs
Diesel Fuel/Forklift
Energy Usage: Electricity/Paint Mixers
Category/Aspect
Quantity or Volume
8 tons
0.5 ton
2 tons
N/A
Virgin Thinners (Inp-2)
Fugitive Air Emissions (Out-1) Fugitive Air Emissions (Out-1) Fugitive Air Emissions (Out-1)
Yes
N/A
Virgin Coatings (Inp-1)
Yes
Yes
Yes
Yes
No No No No No
N/A
10 kw/ No year 1000 No gallons per year
Legal Requirements/ Voluntary Commitments, Company Policy
Inp-3 Inp-3 Inp-3 Inp-3 Inp-3
Mix and thin coatings (Pro-4) Transport Equipment, Materials, Waste and Scrap to and from Paint Pit. (Pro-2), (Pro-5), (Pro15), (Pro-16), (Pro-19), (Pro-20), (Pro-21)
Inputs, Processes, Outputs, Products
Community Concern
Yes
Yes
Yes
Yes
Yes
No No No No No
No
No
Yes
Yes
Yes
No
No
No No No No No
No
No
Pollution Prevention Potential
N/A
N/A
N/A
N/A
N/A
No No No No No
No
No
S
S
S
S
S
N N N N N
N
N
Marine Coating Rule, permits of operate, toxic air emissions rule Marine Coating Rule, permits of operate, toxic air emissions rule Marine coating rule, coating permits to operate, toxic air emissions rule
Marine Coating Rule, Air Permit
Marine Coating Rule, Air Permit
Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria
Does not meet significance criteria, low volume usage Does not meet significance criteria, low volume usage
Rationale for Significance (S) or Non-significance (N) C = control or maintain S = study or investigate I = improve
Objective & Type Target
Area/Process: Small Parts Coating, Outdoors Date: 5/17/01 SIGNIFICANCE DETERMINATION OBJECTIVES &TARGETS Potential Impact to the Environment
5-20 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-2: Flow Diagram and Aspects Form for Small Parts Coating, Outdoors (continued)
Module
Environmental Aspects
Environmental Aspects
Coating Thinner Spillage
Spillage, Contaminated Scrap
Spillage
Water Discharges: N/A Stormwater Discharge: VOC-contaminated Water Heavy Metal Contaminated Water Spillage and Other:
Consolidate Contaminated Solvent into Drums (Pro-17)
Solvent Cleaning of Equipment (Pro-11)
Consolidate waste paint and solvent (Pro-10)
Transport waste cans, cleaning solvents, contaminated solvents and debris to scrap yard (Pro-14, Pro-18, Pro-19, Pro-20) Consolidate equipment cleaning solvent into drums (Pro-16) Transport coatings and thinners (Pro-1 through Pro-6) Consolidate Waste (Pro9)
Waste Paint and Solvent (Out-2) Consolidate contaminate disposables (Pro-12) and debris (Pro-13)
Waste Chemicals
Solid Waste, Landfill
Tyrex Suites, Rollers, Brushes, Filter Masks, Paint Stirrers, Drop Clothes, Masking Tape (Out-5), Debris (Out-6)
Contaminated Waste
100 gallons Yes per year 50 gallons Yes per year 10 gallons No per year
No
No
No
No
No
No
No 5 gallons
No
10 gallons Yes per year
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
5 gallons No per year
N/A
1,500 gallons 10,000 and 5,000 lbs per year
year
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
N
N
S
N
S
S
S
S
S
N/A N
N/A S
N/A S
No
No
N/A
No
N/A
N/A
No
N/A
No
Does not meet significance criteria, low volume of spillage
Volume exceeds “No Spill” Policy limits
Volume exceeds “No Spill” Policy limits
Does not meet significance criteria, low volume of spillage, scrap is recycled
Does not meet significance criteria, low spillage volume
Volume exceeds “No Spill” Policy limits
Does not meet significance criteria, low volume spillage
Storm water permit
Storm water permit
Waste Reduction Program
RCRA (Title C)
Waste Reduction Program
Plan · Do · Check/Act
Example 5-2: Flow Diagram and Aspects Form for Small Parts Coating, Outdoors (continued)
Module
5-21
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-3: Flow Diagram and Aspects Form for Dry Abrasive Blasting
Prepare Surface of Cleaning Pro-1
Blast Pots, Hoses and Guns Inp-1
Abrasive Media Inp-2
Transport Equipment and Materials to Work Area Pro-2
Assemble Equipment and Materials Pro-3 Disposables Inp-3 Curtains/Shrouds Inp-5 Compressed Air Supply Inp-4 Conduct Blasting Operations Pro-4
Fugitive Air Emissions Out-1
Cleaned Surface Prod-1
Clean Up Pro-5
Spend Abrasive Out-2
Contaminated Curtains/Shouds Out-3
Waste Disposables Out-4
Equipment Out-5
Contaminated Debris Out-6
Consolidate into Bins/Trucks Pro-6
Clean and Repair Pro-7
Consolidate into Bags and Drums Pro-8
Clean Equipment Pro-9
Consolidate into Bags and Drums Pro-10
Transport to Waste Pile Pro-11
Store or Dispose Pro-12
Transport to Waste Yard Pro-13
Store Equipment Pro-14
Transport to Waste Yard Pro-15
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-22
Environmental Aspects
Environmental Aspects
Wastes: Waste Abrasive
Noise/Odor/Radiation: Blasting Operations
Water Usage: N/A Supplies/Disposables: Rags Gloves Tyvek Coverall Filters Chemicals: N/A Air Emissions: Fugitive Particulates
Diesel Fuel/Forklift
Energy Usage: Electricity
Category/Aspect
Spent Abrasive (Out-2)
Conduct Blasting Operations (Pro-4)
Fugitive Air Emissions (Out-1)
Inp-3 Inp-3 Inp-3 Inp-3
Transport Equipment, Materials, Scrap and Waste to and from Work Area (Pro-2), (Pro-11), (pro-12), (Pro-13), (Pro14) and (Pro-15)
Compress Air Supply (Inp-4)
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
Yes
No No No No
6,000 tons per Yes year
High levels Yes of noise
10 tons
N/A
N/A
10,000 No kw per year 1000 No gallons per year
Community Concern
Yes
Yes
Yes
No No No No
No
No
Pollution Prevention Potential
Yes
No
Yes
No No No No
No
Yes
N/A
N/A
N/A
No No No No
No
No
Potential Impact to the Environment
S
S
S
N N N N
N
S
Waste Reduction Program
High noise levels effects nesting birds
Permits to operate, Toxic air emissions rule, Nuisance rule
Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria
Does not meet significance criteria, low volume usage
Pollution prevention potential.
Rationale for Significance (S) or Non-significance (N)
Area/Process: Dry Abrasive Blasting SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-3: Flow Diagram and Aspects Form for Dry Abrasive Blasting (continued)
Module
5-23
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-4: Flow Diagram and Aspects Form for Burning and Cutting
Prepare Metal for Burning Pro-1
Burning Gasses Inp-1
Torches and Hoses Inp-2
Transport Equipment and Materials to Work Area Pro-2
Assemble Equipment and Materials Pro-3 Disposables Inp-4
Conduct Burring Operations Pro-4
Fugitive Air Emissions Out-1
Finished Shape Prod-1
Clean Up Pro-5
Waste Slag and Metal Chips Out-2
Burning Equipment and Gases Out-3
Waste Disposables Out-4
Contaminated Debris Out-5
Consolidate into Pails Pro-6
Clean Equipment Pro-7
Consolidate into Bags and Drums Pro-8
Consolidate into Bags and Drums Pro-9
Transport to Waste or Scrap Yard Pro-10
Store Equipment and Inventory Gases Pro-11
Transport to Waste Yard Pro-12
Transport to Waste Yard Pro-13
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-24
Environmental Aspects
Environmental Aspects Waste Disposables (Out4), Contaminated Debris (Out-5)
No
100 lbs No per year
No
No
No
Yes
No
No
No
Yes
No
No No No No
No
Community Concern
Yes
N/A
10,000 lbs per year
0.5 ton
Fugitive Air Emissions (Out-1) Yes
No
N/A
Burning Gases (Inp-1)
N/A No No No No
Water Discharges: N/A Stormwater Discharges: Heavy Metal Contaminated Fugitive Air Emissions Water (Out-1) Spillage and Other: Transport Equipment, Spillage Materials, Scrap and Waste to and from Work Area (Pro-2), (Pro-10), (Pro-12), (Pro-13)
Contaminated Waste
Quantity or Volume
1000 No gallons per year
Legal Requirements/ Voluntary Commitments, Company Policy
Inp-4 Inp-4 Inp-4 Inp-4
Transport Equipment, Materials, Scrap and Waste to and from Work Area (Pro-2), (Pro-10), (Pro-12), (Pro-13), (Pro14)
Noise/Odor/Radiation: Odor from Burning Fumes Fugitive Air Emissions (Out-1) Wastes: Scrap Metal Waste Slag and Metal Chips (Out-2)
Water Usage: N/A Supplies/Disposables: Rags Gloves Tyvek Coverall Filters Chemicals: Acetylene Air Emissions: Metal Fumes
Energy Usage: Diesel Fuel/Forklift
Category/Aspect
Inputs, Processes, Outputs, Products
Pollution Prevention Potential
No
Yes
Yes
Yes
No
Yes
No
No No No No
No
N
N N N N
N
S
S
N
No
N
N/A S
No
No
No
N/A S
No
No No No No
No
Potential Impact to the Environment
Does not meet significance criteria, low volume spillage
Storm water permit
Waste Reduction Program
Waste Reduction Program
Does not meet significance criteria
Permits of operate, Toxic air emissions rule
Does not meet significance criteria
Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria
Does not meet significance criteria, low volume usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Burning and Cutting SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-4: Flow Diagram and Aspects Form for Burning and Cutting (continued)
Module
5-25
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-5: Flow Diagram and Aspects Form for Ultra High Pressure
Water Jetting Prepare Surface of Cleaning Pro-1
Pump, Hoses and Guns Inp-1
Transport Equipment and Materials to Work Area Pro-2
Assemble Equipment and Materials Pro-3
Water Inp-4
Disposables Inp-3
Conduct Water Jetting Operations Pro-4
Contaminated Water Waste Stream Out-1
Cleaned Surface Prod-1
Clean Up Pro-5
Waste Disposables Out-2
Equipment Out-3
Contaminated Debris Out-4
Consolidate into Bags and Drums Pro-6
Clean Equipment Pro-7
Consolidate into Bags and Drums Pro-8
Transport to Waste Yard Pro-9
Store Equipment Pro-10
Transport to Waste Yard Pro-11
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-26
Environmental Aspects
Environmental Aspects
N/A
Spillage and Other:
Stormwater Discharges: Contaminated Wastewater
Water Discharges: Contaminated Wastewater
Solid Waste
Wastes: Contaminated Wastewater
Supplies/Disposables: Rags Gloves Tyvek Coverall Filters Chemicals: N/A Air Emissions: N/A Noise/Odor/Radiation: Water Jetting Operations
Water Usage: Water
Energy Usage: Diesel Fuel/Pumps
Category/Aspect
Contaminated Waste Water Stream (Out-1)
Contaminated Waste Water Stream (Out-1)
Waste Disposables and Debris (Out-2), (Out-4)
Contaminated Waste Water Stream (Out-1)
Conduct Water Jetting Operations (Pro-4)
Inp-3 Inp-3 Inp-3 Inp-3
Water (Inp-4)
Conduct Water Jetting Operations (Pro-4)
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
N/A
80,000 gallons Yes per year
80,000 gallons Yes per year
80,000 gallons Yes per year 10,000 lbs per No year
High levels Yes of noise
N/A
N/A
No No No No
100,000 No gallons per year
5,000 No gallons per year
Community Concern
No
No
No
No
Yes
No No No No
No
No
Pollution Prevention Potential
Yes
Yes
Yes
Yes
N/A
No No No No
No
No
N/A
N/A
No
N/A
No
No No No No
No
No
Potential Impact to the Environment
S
S
S
S
S
N N N N
N
N
Stormwater permit requirements
NPDES discharge requirements
Waste reduction policy
NPDES discharge requirements
High noise levels effects nesting birds
Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria
Does not meet significance criteria, low volume usage
Does not meet significance criteria, low volume usage
Rationale for Significance (S) or Non-significance (N) C = control or maintain S = study or investigate I = improve
Objective & Type Target
Area/Process: Ultra High Pressure Water Jetting Date: 5/17/01 SIGNIFICANCE DETERMINATION OBJECTIVES &TARGETS
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
Plan · Do · Check/Act
Example 5-5: Flow Diagram and Aspects Form for Ultra High Pressure Water Jetting
(continued)
Module
5-27
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-6: Flow Diagram and Aspects Form for Metal Grinding Prepare Metal Surface for Grinding Pro-1
Ginding Machine Inp-1
Grinding Disks Inp-2
Transport Equipment and Materials to Work Area Pro-2
Assemble Equipment and Materials Pro-3 Electric or Pneumatic Power Inp-4
Disposables Inp-3
Grind Surfaces Pro-4
Fugitive Air Emissions Out-1
Smooth Surface Prod-1
Clean Up Pro-5
Waste Grinding Disks Out-2
Waste Grinding Dust and Metal Chips Out-3
Grinding Equipment Out-4
Waste Disposables Out-5
Contaminated Debris Out-6
Consolidate into Bags and Drums Pro-6
Consolidate into Pails Pro-7
Clean Equipment Pro-8
Consolidate into Bags and Drums Pro-9
Consolidate into Bags and Drums Pro-10
Transport to Waste Yard Pro-11
Transport to Waste or Scrap Yard Pro-12
Store Equipment Pro-13
Transport to Waste Yard Pro-14
Transport to Waste Yard Pro-15
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-28
Environmental Aspects
Environmental Aspects Waste Grinding disks Metal dust and chips, disposables and debris (Out-2), (Out-3), (Out-5), (Out-6)
Fugitive Air Emissions (Out-1)
Inp-2 Inp-3 Inp-3 Inp-3
Electric or Pneumatic Power (Inp-4) Transport Equipment, Materials, Scrap and Waste to and from Work Area (Pro-2), (Pro-11), (Pro-12), (Pro-14) and (Pro-15)
Water Discharges: N/A Stormwater Discharges: Heavy Metal Contaminated Fugitive Air Emissions Water (Out-1) Spillage and Other: Transport Equipment, Spillage Materials, Scrap and Waste to and from Work Area (Pro-2), (Pro-11), (Pro-12), (Pro-14) and (Pro-15)
Noise/Odor/Radiation: N/A Wastes: Solid Waste
Water Usage: N/A Supplies/Disposables: Grinding Discs Gloves Tyvex Coverall Filters Chemicals: N/A Air Emissions: Metal Dust and Fumes
Diesel Fuel/Forklift
Energy Usage: Electricity
Category/Aspect
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
No No No No
No
100 lbs No per year
No
Yes
No
No
No No No No
No
No
Community Concern
Yes
N/A
8,000 lbs per year
N/A
1.8 tons No per year
N/A
N/A
5,000 No kw/year 1000 No gallons per year
Pollution Prevention Potential
No
Yes
Yes
Yes
No No No No
No
No
No
N/A
No
No
No No No No
No
No
Potential Impact to the Environment
N
S
S
S
N N N N
N
N
Does not meet significance criteria, low volume spillage
Storm water permit
Waste Reduction Program
Soil and water contamination
Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria Does not meet significance criteria
Does not meet significance criteria, low volume usage Does not meet significance criteria, low volume usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Metal Grinding SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-6: Flow Diagram and Aspects Form for Metal Grinding (continued)
Module
5-29
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-7: Flow Diagram and Aspects Form for
Material Transport, Crane
Prepare Crane for Fueling Pro-1
Diesel Fuel Inp-1
Transfer Fuel from Storage to Fuel Truck Pro-2
Transport Fuel to Crane Pro-3
Transfer Fuel from Fuel Truck to Crane Pro-4
Engage Crane Engine(s) Pro-5
Point Source Air Emissions Out-1 Lift and Transport Prod-1
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-30
Environmental Aspects
Environmental Aspects
Spillage
Noise/Odor/Radiation: Odor from Diesel Fuel Combustion Wastes: N/A Water Discharges: N/A Stormwater Discharges: Petroleum Contaminated Water Spillage and Other:
Water Usage: N/A Supplies/Disposables: N/A Chemicals: N/A Air Emissions: NOX, SOX, Particulates
Energy Usage: Diesel Fuel
Category/Aspect
Spillage of Diesel Fuel (Pro-2), (Pro-3), (Pro-4)
Spillage of Diesel Fuel (Pro-2), (Pro-3), (Pro-4)
Point Source Air Emissions (Out-1)
Point Source Air Emissions (Out-1)
Diesel Fuel (Inp-1)
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
Yes 250 gallons Yes per year
N/A
N/A
No
2.3 tons Yes
N/A
N/A
N/A
10,000 gallons No per year
Community Concern
Yes
Yes
No
Yes
No
Pollution Prevention Potential
Yes
Yes
No
Yes
No
Yes
N/A
No
N/A
N/A
Potential Impact to the Environment
S
S
N
S
N
Annual volume exceeds criteria of “No Spill Policy”
Storm water permit
Does not meet significance criteria
Permits to operate
Does not meet significance criteria, high volume usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Material Transport, Crane SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-7: Flow Diagram and Aspects Form for Material Transport, Crane (continued)
Module
5-31
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-8: Flow Diagram and Aspects Form for Aluminum Fabrication
Aluminum Fabrication Work Item
Plan and Schedule Fabrication of Item Transportation Equipment
Transport Materials to Work Area
Aluminum Burning Equipment Cut Shapes
Burning Gases
Finish Shape Edges
Grinders and Grinding Discs Assemble Item from Shapes
Aluminum Scrap
Fabricated Alumimum Item
Place in Bins
Clean out and Containerize
Transfer Finished Item to Coating Shop for Preservation
Transport to Recycling Facility
Transport to Disposal Facility
Process Step "Pro"
Output "Out"
Burning Fumes
Method "Meth"
Input "Inp"
Burn Table Debris
Product "Prod"
Decision
Module 5-32
Environmental Aspects
Environmental Aspects
Finish Shapes (Pro-4)
Weld shapes into items (Pro-5)
Weld shapes into items (Pro-5)
Disposables (Pro-3)
Disposables (Pro-3)
Disposables (Pro-3)
Grinding Discs
Welding Rod & Wire
Welding Gases
Rags
Gloves
Tyvex Suits
Fugitive Air Emissions (Out-2)
Cutting Shapes (Pro-3)
Chemicals: N/A Air Emissions: Burning Fumes
Quantity or Volume
No
No
No
No
No
No
No
No
Legal Requirements/ Voluntary Commitments, Company Policy
10 lbs Yes per year
N/A
1,000 cu.ft. per year 100 discs per year 2,000 lbs per year 4,000 cu.ft. per year 50 cu yards per year 100 pairs per year 5 cu yards per year
N/A
Transport raw aluminum, 1,000 fabricated items and scrap gals per (Pro-2), (Pro-6), (Pro-8), year (Pro-9)
Burning Gases
Water Usage: N/A Supplies/Disposables:
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Community Concern
Yes
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
N
N
N
N
N
N
N
N
Toxic Air Emissions Rule
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Aluminum Fabrication SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-8: Flow Diagram and Aspects Form for Aluminum Fabrication (continued)
Module
5-33
5-34
)
N/A
Rainfall contact with Outside Aluminum Item storage (Pro-14)
Burn Table Debris (Out3)
Burn Table Debris
Water Discharges: N/A Stormwater Discharges: Stormwater Contact/Aluminum Storage Spillage and Other:
Aluminum Scrap (Out-1)
Cutting Shapes (Pro-3)
(
Scrap Aluminum
Wastes:
Burning Noise
Noise/Odor/Radiation:
y
N/A
0.1 lb Yes per year
N/A
800 lbs Yes per year 2 drums No per year
120 Yes decibels
p
Yes
No
No
No
No
No
No
No
No
No
No
No
S
N
N
S
Stormwater Permit Requirements
Non-Hazardous waste
Scrap Aluminum is recycled
Worker Safety Requirements
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-8: Flow Diagram and Aspects Form for Aluminum Fabrication (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-9: Flow Diagram and Aspects Form for Steel Fabrication
Steel Fabrication Work Item
Plan and Schedule Fabrication of Item Transportation Equipment
Transport Materials to Work Area
Steel Burning Equipment
Burning Gases
Submerged Burning Table
Grinders and Grinding Discs
Cut Shapes
Steel Burning Equipment
Dry Burning Table
Burning Gases
Finish Shape Edges
Table Sludge
Contaminated Water
Clean out and Containerize
Transfer into Holding Tank
Fabricated Steel Item
Clean out and Containerize
Transport to Disposal Facility
Sample and Analyize
Transfer Finished Item to Coating Shop for Preservation
Transport to Disposal Facility
Transfer to Appropriate Disposal Facility
Steel Scrap
Assemble Item from Shapes
Steel Scrap
Burning Fumes
Burn Table Debris
Place in Bins
Transport to Recycling Facility
Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module Environmental Aspects
5-35
Finish Shapes (Pro-3) Weld shapes into items (Pro-5) Weld shapes into items (Pro-5) Disposables (Pro-3)
Disposables (Pro-3)
Disposables (Pro-3)
Grinding Discs
Welding Rod & Wire
Welding Gases
Rags
Gloves
Tyvex Suits
N/A
10,000 cu.ft. per year 1,000 discs per year 2,500 lbs per year 4,000 cu ft per year 50 cu yards per year 100 pairs per year 5 cu yards per year
25,000 Submerged Burning Table gals per (Inp-4) year
Cutting Shapes (Pro-3)
Chemicals: N/A
Quantity or Volume
Transport raw steel, 1,000 fabricated items and scrap gals per (Pro-2), (Pro-13), (Pro-8), year (Pro-9)
Burning Gases
Supplies/Disposables:
Water
Water Usage:
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
No
No
No
No
No
No
No
No
No
Community Concern
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
N
N
N
N
N
N
N
N
N
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Steel Fabrication SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-36 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-9: Flow Diagram and Aspects Form for Steel Fabrication (continued)
Module
Environmental Aspects
Environmental Aspects Burn Table Debris (Out5)
Burn Table Debris
N/A
Spillage and Other:
Stormwater Contact/Steel Storage
Stormwater Discharges:
Burn Table Water Rainfall contact with Outside Steel Item storage (Pro-14)
Contaminated Water (Out-2)
Steel Scrap (Out-3)
Scrap Steel
Water Discharges:
Table Sludge (Out-2)
Cutting Shapes (Pro-3)
Fugitive Air Emissions (Out-4)
Burn Table Sludge
Wastes:
Burning Noise
Noise/Odor/Radiation:
Burning Fumes
Air Emissions:
N/A
0.1 lb Yes per year
600 gals Yes per year
1,200 gals per Yes year 80,000 lbs per Yes year 25 drums No per year
120 Yes decibels
100 lbs Yes per year
Yes
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
S
S
N
N
S
S
S
Stormwater Permit Requirements
POTW discharge requirements
Non-Hazardous waste
Scrap steel is recycled
Hazardous Waste Requirements
Worker Safety Requirements
Toxic Air Emissions Rule
Plan · Do · Check/Act
Example 5-9: Flow Diagram and Aspects Form for Steel Fabrication (continued)
Module
5-37
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-10: Flow Diagram and Aspects Form for Sheet Metal
Sheet Metal Fabrication Work Item
Determine Scope of Work
Order Materials and Schedule Tasks
Materials
Fabrication Waste
Perform Fabrication Work
Equipment
Disposables Waste
Shop Disposables
Inspect and Test
Fabricated Article
Install Fabricated Article
Process Step "Pro"
Output "Out"
Installation Waste
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module 5-38
Environmental Aspects
Environmental Aspects Weld shapes into items (Pro-4) Disposables (Pro-3)
Disposables (Pro-3)
Disposables (Pro-3)
Welding Gases
Rags
Gloves
Tyvex Suits
Air Emissions: Welding Fumes
Oils, Greases, Lubricants
Glues/Adhesives
Fugitive Air Emissions (Out-4)
Assemble pieces and install fabricated items (Pro-5), (Pro-7) Cut and Shape pieces (Pro-4)
Weld shapes into items (Pro-5)
Chemicals:
Quantity or Volume
Legal Requirements/ Voluntary Commitments, Company Policy
15 lbs Yes per year
Yes
No
25 gals No per year
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Community Concern
55 gals No per year
2,000 lbs per year 4,000 cu.ft. per year 50 cu yards per year 100 pairs per year 5 cu yards per year
N/A
Transport raw aluminum, 1,000 fabricated items and scrap gals per (Pro-3), (Pro-6), (Pro-9) year 50,000 Machine Operation (Prokw per 4) year
Welding Rod & Wire
Water Usage: N/A Supplies/Disposables:
Electricity/Equipment Power
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
N
N
N
N
N
N
N
N
N
Toxic Air Emissions Rule
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Sheet Metal SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-10: Flow Diagram and Aspects Form for Sheet Metal (continued)
Module
5-39
5-40
N/A
Spillage and Other:
Stormwater Contact/Sheet Metal Storage
Water Discharges: N/A Stormwater Discharges: Rainfall contact with Outside Sheet Metal Item storage (Pro-6)
Metal Debris and other (Out-1)
Fabrication Wastes
)
Metal Scrap (Out-3)
(
Scrap Metal
Noise/Odor/Radiation: N/A Wastes:
y
N/A
0.1 lb Yes per year
N/A
100 lbs Yes per year 10,000 lbs per No year
N/A
p
Yes
No
No
No
No
No
No
No
No
S
N
N
Stormwater Permit Requirements
Low Volume or Usage
Scrap metal is recycled
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-10: Flow Diagram and Aspects Form for Sheet Metal (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-11: Flow Diagram and Aspects Form for Ship’s Fuel Removal
Fuel Removal Work Item
Transport Equipment to Work Area
Stage Equipment
Pumps and Hoses
Transfer Fuel from Ship to Holding Tank Ashore
Cleaning Disposables
Clean Fuel Tanks of Residuals
Clean Holding Residuals
Holding Tank
Hydrocarbon Emissions
Sample and Analysis
Transfer Residuals to Holding Tank Ashore
Clean Tank - Safe for Men and/or Hot Work
Liquids
Sludges
Classification Recyclable
Non-recyclable
Transfer to Vacuum Tanker
Transfer to Vacuum Tanker
Transport to Recycling Facility
Transport to Disposal Facility
Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module Environmental Aspects
5-41
Disposables (Inp-1) Disposables (Inp-1)
Tyvex Suits
Filter Carts
Fuel Spillage
Water Discharges: N/A Stormwater Discharges: N/A Spillage and Other:
Solid Wastes
Sludges
Waste Fuels
Noise/Odor/Radiation: N/A Wastes:
Hydrocarbons
Quantity or Volume
No
No
No
No
N/A
1.5 tons Yes per year
N/A
500 cu yards per year 1,000 pairs per year 2,000 suits per year 600 per year
N/A
1,000 gallons No per year 5,000 kw per No year
Legal Requirements/ Voluntary Commitments, Company Policy
Spillage during transfers (Pro-2), (Pro-4), (Pro-7)
500 gals Yes per year
N/A
N/A
750,000 Liquid fuel removed from gals per No tanks (Out-6) year Sludges removed from 850 No tanks (Out-7) bbls per year 600 cu Contaminated yards No Disposables (out-8) per year
Fuel Vapors (Pro-2), (Pro-4), (Pro-7)
Disposables (Inp-1)
Gloves
Chemicals: N/A Air Emissions:
Disposables (Inp-1)
Transport Equipment and Materials to Work Area (Pro-1) Operation of Transfer pumps (Pro-2), (Pro-4), (Pro-7)
Rags
Water Usage: N/A Supplies/Disposables:
Electricity
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Community Concern
No
No
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
S
N
N
N
S
N
N
N
N
N
N
High potential for spillage to be discharged to surface waters
Low Volume Waste
Sludges are treated and disposed of off-site
Waste fuels are recycled
Air Emission Rules
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Ship’s Fuel Removal SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-42 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-11: Flow Diagram and Aspects Form for Ship’s Fuel Removal (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-12: Flow Diagram and Aspects Form for Pipe Fabrication Pipe Fabrication Work Item
Determine Scope of Work
Materials
Order Materials and Schedule Tasks Fabrication Waste
Equipment
Perform Fabrication Work Disposables Waste
Shop Disposables
Inspect and Hydro Test
Waste Water
Fabricated Pipe
Install Pipe
Process Step "Pro"
Output "Out"
Installation Waste
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module Environmental Aspects
5-43
Pipe Fabrication (Pro-3)
Pipe Fabrication (Pro-3)
Pipe Fabrication (Pro-3)
Disposables (Pro-3)
Disposables (Pro-3)
Disposables (Pro-3)
Welding Gases
Solder
Flux
Rags
Gloves
Tyvex Suits
Pipe Fabrication (Pro-3)
Pipe Fabrication (Pro-3)
PVC Cement
Pipe Fabrication (Pro-3)
Lubricants
PVC Cleaner
Pipe Fabrication (Pro-3)
Oils
Chemicals:
Pipe Fabrication (Pro-3)
Welding Rod & Wire
Supplies/Disposables:
Water
Hydrostatic testing
Transport pipes (Pro-5), (Pro-6)
Diesel Fuel/Forklifts
Water Usage:
Machine Operation (Pro3)
Electricity/Equipment Power
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
110 gals per year 55 gals per year 10 gallons per year 10 gallons per year
2,500 lbs per year 4,000 cu ft per year 80 lbs per year 20 gals per year 50 cu yards per year 100 pairs per year 5 cu yards per year
15,000 gals per year
No
No
No
No
No
No
No
No
No
No
No
No
50,000 kw per No year 800 gals No per year
Community Concern
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Low Volume Usage
Low Volume Usage
Low Volume Usage
Low Volume Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Pipe Fabrication SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-44 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-12: Flow Diagram and Aspects Form for Pipe Fabrication (continued)
Module
Environmental Aspects
Environmental Aspects
Spillage and Other: N/A
Stormwater Contact/Pipe Storage
Water Discharges: N/A Stormwater Discharges:
Installation Waste
Waste Water
Disposables
Scrap Metal
Air Emissions: Welding, Brazing, Soldering Noise/Odor/Radiation: N/A Wastes: N/A
Rainfall contact with Outside pipe storage (Pro-5) N/A
0.1 lb Yes per year
N/A
No
No
No
No
15 lbs Yes per year
1,500 Fabrication Waste (Out-2) lbs per year 50 cu Fabrication Waste (Out-2) yards per year 8,000 Hydro Testing Pipe (Outgals per 4) year 100 cu Installing Pipe System yards (Out-5) per year
Fugitive Air Emissions (Out-1)
p
Yes
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
S
N
N
N
N
S
Stormwater Permit Requirements
Low Volume Usage
Discharged to POTW
Low Volume Usage
Scrap metal is recycled
Toxic Air Emissions Rule
Plan · Do · Check/Act
Example 5-12: Flow Diagram and Aspects Form for Pipe Fabrication (continued)
Module
5-45
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-13: Flow Diagram and Aspects Form for Compressed Air Prepare Compressor Engine(s) for Fueling Pro-1
Diesel Fuel Inp-1
Transfer Fuel from Storage to Fuel Truck Pro-2
Transport Fuel to Compressor Engine(s) Pro-3
Transfer Fuel from Fuel Truck to Compressor Engine Tanks Pro-4
Engage Compressor Engine(s) Pro-5 Point Source Air Emissions Out-1 Compressed Air Distribution Prod-1
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-46
Environmental Aspects
Environmental Aspects
Oil Spills
Stormwater Discharges: N/A Spillage and Other:
Air Line Condensate
Noise/Odor/Radiation: N/A Wastes: N/A Water Discharges:
Internal Combustion
Water Usage: N/A Supplies/Disposables: N/A Chemicals: N/A Air Emissions:
Diesel Fuel
Energy Usage:
Category/Aspect
Fuel Transfers (Pro-2), (Pro-4)
Condensate Traps (Out2)
Operate Compressor Engine (Pro-5)
Diesel Fuel
Inputs, Processes, Outputs, Products
Quantity or Volume
Yes
Legal Requirements/ Voluntary Commitments, Company Policy
100 gals Yes per year
N/A
100 gals No per year
N/A
N/A
NOX/S OX 2 Yes tons per year
N/A
N/A
N/A
100,000 gals per year
Community Concern
Yes
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
N
S
S
Company No Spill Policy
Low Volume Discharge
Air Quality Rule, Permits to Operate
Air Quality Standards, Permits to Operate
Rationale for Significance (S) or Non-significance (N)
Area/Process: Compressed Air SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-13: Flow Diagram and Aspects Form for Compressed Air (continued)
Module
5-47
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-14: Flow Diagram and Aspects Form for Inside Machine Shop
Machining Work Item
Determine Scope of Work
Order Materials and Schedule Tasks
Transport Equipment
Materials
Transport Piece from Ship to Inside Machine Shop
Inspect Piece
Fabrication Waste
Equipment
Perform Required Work Shop Disposables Waste
Shop Disposables
Reassemble Piece
Inspect and Test
Waste Testing Materials and Disposables
Repaired Piece
Transport Piece to Ship for Installation
Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module 5-48
Environmental Aspects
Environmental Aspects Weld shapes into items (Pro-4) Disposables (Pro-4)
Disposables (Pro-4)
Disposables (Pro-4)
Welding Gases
Rags
Gloves
Tyvex Suits
Air Emissions: Welding Fumes
Oils, greases, lubricants
Glues/Adhesives
Fugitive Air Emissions (Out-5)
Assemble pieces and install fabricated items (Pro-5) Machinery repair and fabrication (Pro-4)
Weld shapes into items (Pro-4)
Chemicals:
Quantity or Volume
Legal Requirements/ Voluntary Commitments, Company Policy
5 lbs Yes per year
Yes
No
25 gals No per year
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Community Concern
55 gals No per year
2,000 lbs per year 4,000 cu.ft. per year 50 cu yards per year 100 pairs per year 5 cu yards per year
N/A
Transport machinery, 1,000 fabricated items and scrap gals per (Pro-2), (Pro-7), (Pro-9) year 50,000 Machine Operation (Prokw per 4) year
Welding Rod & Wire
Water Usage: N/A Supplies/Disposables:
Electricity/Equipment Power
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
N
N
N
N
N
N
N
N
N
Toxic Air Emissions Rule
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Inside Machine Shop SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-14: Flow Diagram and Aspects Form for Inside Machine Shop (continued)
Module
5-49
5-50
Water Discharges: N/A Stormwater Discharges: N/A Spillage and Other: N/A
Metal Debris and other (Out-1)
Fabrication Wastes
)
Metal Scrap (Out-3)
(
Scrap Metal
Noise/Odor/Radiation: N/A Wastes:
y
N/A
N/A
N/A
1,000 lbs per year 10,000 lbs per year
N/A
p
No
Yes
No
No
No
No
No
No
N
N
Low Volume or Usage
Scrap metal is recycled
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-14: Flow Diagram and Aspects Form for Inside Machine Shop (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-15: Flow Diagram and Aspects Form for Interior Ship Painting Install Space Ventilation Equipment Inp-1
Coating Inp-2
Prepare Space for Painting Pro-1
Transport Coating to Ship Pro-2
Store Coating on Ship Pro-3
Thinner Inp-3
Disposables Inp-4
Prepare Coating for Paint (Mix and Thin Pro-4
Transport Prepared Coating to Ship Workspace Pro-5
Airless Sprayer Meth-2 Brush and Roll Meth-1
Application Method HVLP Sprayer Meth-3
Transfer Paint to Bucket Pro-6
Transfer Paint to Paint Pot Pro-7 Apply Coating to Surface Pro-8 Ventilation Exhaust Air Emissions Out-1 Coated Surface Prod-1
Clean Up Pro-9
Waste Paint Buckets Out-2
Waste Paint & Solvent Out-3
Contaminated Equipment Out-4
Consolidate and Place on Palets Pro-10
Consolidate into Drums Pro-11
Solvent Cleaning Pro-12
Transport to Scrap Yard Pro-15
Transport to Waste Yard Pro-16
Consolidate Contaminated Solvent into Drums Pro-17
Transport to Waste Yard Pro-21
Contaminated Disposables Out-6
Contaminated Debris Out-7
Clean Equipment Out-5
Consolidate into Bags and Drums Pro-13
Consolidate into Bags and Drums Pro-14
Store Equipment Pro-18
Transport to Waste Yard Pro-19
Transport to Waste Yard Pro-20
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module Environmental Aspects
5-51
Ventilation Exhaust Air (Out-1) Ventilation Exhaust Air (Out-1)
Overspray, Fugitive Air Emissions 1 ton
5 tons
15 tons
Ventilation Exhaust Air (Out-1)
Fugitive HAP
N/A
Disposables (Pro-3)
Sand Paper
Virgin Thinners (Inp-3)
Disposables (Pro-3)
Filter Carts
N/A
Disposables(Pro-3)
Tyvex Suits
500 cu yards per year 1,000 pairs per year 50 cu yards per year 600 per year 10 gross per year
N/A
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
1000 gallons No per year
Legal Requirements/ Voluntary Commitments, Company Policy
No
Community Concern
10 kw No per year
Quantity or Volume
Virgin Coatings (Inp-2)
Disposables (Pro-3)
Gloves
Chemicals: VOC Content HAP Content VOC Content HAP Content Air Emissions: Fugitive VOC
Disposables (Pro-3)
Mix and Thin Coating (Pro-4) Transport Equipment, Materials, Waste and Scrap to and from Work Area (Pro-2), Pro-5), (Pro-15), Pro-16), Pro21), (Pro-21), (Pro-19), (Pro-20)
Rags
Water Usage: N/A Supplies/Disposables:
Diesel Fuel/Forklifts
Electricity/Paint Mixers
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Pollution Prevention Potential
S
S
S
S
S
N
N
N
N
N
N
N
Marine Coating Rule Permits to Operate Toxic Air Emissions Rule Marine Coating Rule Permits to Operate Toxic Air Emissions Rule Marine Coating Rule Permits to Operate Toxic Air Emissions Rule
Marine Coating Rule Air Permits Marine Coating Rule Air Permits
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Interior Ship Painting SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-52 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-15: Flow Diagram and Aspects Form for Interior Ship Painting (continued)
Module
Environmental Aspects
Environmental Aspects Consolidate Waste (Pro11) Consolidation of Waste coating and solvents, solvent cleaning of equipment, Consolidate Waste Solvents into drums (Pro-11), (Pro-12)
Spillage, Contaminated Scrap
Coating and/or Thinner Spillage No
No
No
No
No
No
No
No
No
25 gallons No per year 10 gallons per year 10 gallons per year 5 gallons per year 10 gallons per year
Yes
100 lbs Yes per year
N/A
No
500 gallons Yes per year
Waste Paint and Solvent (Out-3)
Waste Chemicals
Water Discharges: N/A Stormwater Discharges: Heavy Metal Contaminated Ventilation Exhaust Air Water (Out-1) Spillage and Other: Transport waste cans, cleaning solvents, Coating and/or Thinner contaminated solvents Spillage and debris to waste yard (Pro-15), (Pro-16) Consolidate equipment Coating and/or Thinner cleaning solvents into Spillage drums (Pro-17) Transport virgin coatings Coating and/or Thinner and thinners to work area Spillage (Pro-2)
No
No
3,500 lbs per year
Contaminated Waste
No
No
Tyvex Suits, Rollers, Brushes, Filter Masks, Paint Stirrers, Drop Cloths, Masking Tape, Debris. (Out-6), (Out-7)
No
No
3,000 lbs per year
No
Waste Paint Cans (Out-2)
Coating Application (Pro-8)
Contaminated Scrap
Wastes:
Odor from VOC fumes
Noise/Odor/Radiation:
No
No
No
No
No
Yes
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
No
N
N
N
N
N
S
S
S
S
S
Low Volume Spillage
Low Volume Spillage
Low Volume Spillage
Low Volume Spillage
Low Volume Spillage
Facility Stormwater Permit
RCRA (Subtitle C)
Company Waste Reduction Program
Company Waste Reduction Program
Nuisance Rule
Plan · Do · Check/Act
Example 5-15: Flow Diagram and Aspects Form for Interior Ship Painting (continued)
Module
5-53
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-16: Flow Diagram and Aspects Form for Paint Booth Prepare Paint Booth for Painting Operations Pro-1
Coating Inp-1
Transport Coatings to Paint Booth Pro-2
Store Coating in Paint Booth Area Pro-3
Thinner Inp-2
Disposables Inp-3
Prepare Coating for Paint (Mix and Thin Pro-4
Transport Prepared Coating to Workarea Pro-5
Airless Sprayer Meth-2 Brush and Roll Meth-1
Application Method HVLP Sprayer Meth-3
Transfer Paint to Bucket Pro-6
Transfer Paint to Paint Pot Pro-7 Apply Coating to Parts Pro-8
Paint Booth Exhaust Air Emissions Out-1
Coated Part(s) Prod-1
Clean Up Pro-9
Waste Paint Buckets Out-2
Waste Paint & Solvent Out-3
Contaminated Equipment Out-4
Consolidate and Place on Palets Pro-10
Consolidate into Drums Pro-11
Solvent Cleaning Pro-12
Transport to Scrap Yard Pro-16
Transport to Waste Yard Pro-17
Consolidate Contaminated Solvent into Drums Pro-18
Transport to Waste Yard Pro-23
Contaminated Disposables Out-6
Contaminated Debris Out-7
Contaminated Spray Booth Filters Out-8
Clean Equipment Out-5
Consolidate into Bags and Drums Pro-13
Consolidate into Bags and Drums Pro-14
Consolidate into Bags and Drums Pro-15
Store Equipment Pro-19
Transport to Waste Yard Pro-20
Transport to Waste Yard Pro-21
Transport to Waste Yard Pro-22
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module 5-54
Environmental Aspects
Environmental Aspects N/A
Disposables (Pro-3)
Sand Paper
Virgin Thinners (Inp-2)
Disposables (Pro-3)
Filter Carts
N/A
Disposables (Pro-3)
Tyvex Suits
100 cu yards per year 250 pairs per year 10 cu yards per year 80 per year 2 gross per year
N/A
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
1000 gallons No per year
Legal Requirements/ Voluntary Commitments, Company Policy
No
Community Concern
10 kw No per year
Quantity or Volume
Virgin Coatings (Inp-1)
Disposables (Pro-3)
Gloves
Chemicals: VOC Content HAP Content VOC Content HAP Content
Disposables (Pro-3)
Mix and Thin Coating (Pro-4) Transport Equipment, Materials, Waste and Scrap to and from Work Area (Pro-2), Pro-5), Pro16), (Pro-17), (Pro-20), (Pro-21), (Pro-22), (Pro23)
Rags
Water Usage: N/A Supplies/Disposables:
Diesel Fuel/Forklifts
Electricity/Paint Mixers
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
S
N
N
N
N
N
N
N
Marine Coating Rule, Air Permits
Marine Coating Rule, Air Permits
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Paint Booth SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-16: Flow Diagram and Aspects Form for Paint Booth (continued)
Module
5-55
5-56 Y 1ton
5 tons
Spillage, Contaminated Scrap
Coating and/or Thinner Spillage
Coating and/or Thinner Spillage
Coating and/or Thinner Spillage
Consolidate Waste (Pro11)
Transport waste cans, cleaning solvents, contaminated solvents and debris to waste yard (Pro-16), (Pro-17), (Pro21) Consolidate equipment cleaning solvents into drums (Pro-18) Transport virgin coatings and thinners to work area (Pro-2) No
No
0.5 gallon No per year
No
1 gallon No per year
1 gallon No per year
5 gallons No per year
N/A
No
Waste Chemicals
N/A
No
50 gallons Yes per year
Waste Paint and Solvent (Out-3)
Contaminated Waste
Water Discharges: N/A Stormwater Discharges: N/A Spillage and Other:
No
No
1,000 lbs per year
Tyvex Suits, Rollers, Brushes, Filter Masks, Paint Stirrers, Drop Cloths, Masking Tape, Debris, Paint Booth filters. (Out-6), (Out-7), (Out-8)
No
No
Yes
No
500 lbs No per year
No
Yes
Yes
Waste Paint Cans (Out-2)
Coating Application (ProNo 8)
Paint Booth Exhaust Emissions (Out-1) Paint Booth Exhaust Emissions (Out-1)
Contaminated Scrap
Wastes:
Odor from VOC fumes
Noise/Odor/Radiation:
HAP
Air Emissions: VOC
No
No
No
No
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
N
N
N
N
S
S
S
S
S
S
Low Volume Spillage
Low Volume Spillage
Low Volume Spillage
Low Volume Spillage
RCRA (Subtitle C)
Company Waste Reduction Program
Company Waste Reduction Program
Nuisance Rule
Marine Coating Rule, Permits to Operate, Toxic Air Emissions Rule Marine Coating Rule, Permits to Operate, Toxic Air Emissions Rule
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-16: Flow Diagram and Aspects Form for Paint Booth (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-17: Flow Diagram and Aspects Form for Steam Plant
Prepare Boilers for Fueling Pro-1
Bunker Fuel Inp-1
Transfer Fuel from Storage to Fuel Truck Pro-2
Transport Fuel to Boilers Pro-3
Transfer Fuel from Fuel Truck to Boilers Pro-4
Fire Boilers Pro-5
Point Source Air Emissions Out-1 Steam Dstribution Prod-1
Input "Inp"
Process Step "Pro"
Decision
Method "Meth"
Output "Out"
Product "Prod"
Module Environmental Aspects
5-57
Oil Spills
Stormwater Discharges: N/A Spillage and Other:
Steam Condensate
Noise/Odor/Radiation: N/A Wastes: N/A Water Discharges:
External Combustion
Air Emissions:
Water Treatment
Supplies/Disposables: N/A Chemicals:
Water
Water Usage:
Bunker Fuel
Energy Usage:
Category/Aspect
Fuel Transfers (Pro-2), (Pro-4)
Condensate Traps (Out-2)
Fire Boilers (Pro-6)
Water Treatment Chemicals (Ijnp-3)
Boiler Feed Water (Inp2)
Bunker Fuel
Inputs, Processes, Outputs, Products
Quantity or Volume
Yes
Legal Requirements/ Voluntary Commitments, Company Policy
No
100 gals Yes per year
N/A
100 gals No per year
N/A
N/A
NOX/S OX 5 Yes tons per year
2,000 gals per year
N/A
1 M gals No per year
250,000 gals per year
Community Concern
Yes
No
No
No
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
S
N
S
N
N
S
Company No Spill Policy
Low Volume Discharge
Air Quality Rule, Permits to Operate
Non-hazardous chemicals
Low Volume Usage
Air Quality Standards, Permits to Operate
Rationale for Significance (S) or Non-significance (N)
Area/Process: Steam Plant SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-58 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-17: Flow Diagram and Aspects Form for Steam Plant (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-18: Flow Diagram and Aspects Form for Supply Management Customer Furnished or Government Furnished Materials
Shipyard Furnished Materials
Incoming Materials and Supplies
Received on-site
Identify and Inspect
Segregate and Placed in Inventory
Transportation Equipment
Packaging Waste
Release to Authorized Craft
Transport to Craft or Work Area
Packaging Materials
Stage Materials as Required
Utilize Materials and Supplies in Required Process
Transport to Waste Management Area
Package Waste for Transport
Un-Returnable
Excess Materials?
Returnable
Package Excess Materials for Return
Transport to Shipping
No
Reorder as Required
Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module Environmental Aspects
5-59
Spillage, Dry and Liquid
Water Discharges: N/A Stormwater Discharges: N/A Spillage and Other:
Packaging Waste
Chemicals: N/A Air Emissions: N/A Noise/Odor/Radiation: N/A Wastes:
Packaging Materials
Water Usage: N/A Supplies/Disposables:
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Damaged Containers (Pro-1), (Pro-5),
Opening packages for inspection and storage (Pro-2), (Pro-6)
Package for disposal or return (Pro-8), (Pro-9)
Material movement (Pro3), (Pro-7), (Pro-10)
Inputs, Processes, Outputs, Products
Quantity or Volume
500 lbs & 100 gals per year
N/A
N/A
1,000 lbs per year
N/A
N/A
N/A
2,000 lbs per year
N/A
1,000 gals per year
Legal Requirements/ Voluntary Commitments, Company Policy
No
No
No
No
Community Concern
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
N
N
N
N
Low Volume Usage
Low Volume Usage
Low Volume Usage, Some materials are Recycled
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Supply Management SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-60 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-18: Flow Diagram and Aspects Form for Supply Management (continued)
Module
Environmental Aspects
Plan · Do · Check/Act
Example 5-19: Flow Diagram and Aspects Form for Bilge Management
Treatment & Discharge Spec Bilge and Tank Cleaning Services
Equipment
Transport Equipment at Work Area
Lay Hoses from Ship to Holding Tanks Ashore
Stage Pumps in Work Area Holding Tank Transfer Free Liquids from Tanks/Bilges to Holding or Transport Tanks
Secondary Containment
Cleaning Disposals
Is Treatment Required?
Vacumn Tanker Yes Clean Bilges/ Tanks of Residuals
Clean Bilge/Tank Certified for Men and/or Hot Work Dispose, Reuse, Recycle - Off-Site
Off-Site
Maintain Space free of Liquids
Where will Waste be Treated?
On Site No Transfer Liquids to Treatment Facility
Conduct Treatment Process
Sludges
Oil/Petroleum Liquids
Water
Dispose, Reuse, Recycle - On-Site
Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module Environmental Aspects
5-61
Disposables (Inp-1)
Disposables (Inp-1)
Disposables (Inp-1)
Gloves
Tyvex Suits
Filter Carts
Chemicals: N/A Air Emissions: N/A Noise/Odor/Radiation: N/A
Disposables (Inp-1)
Tank cleaning (Inp-3)
Transport Equipment and Materials to Work Area (Pro-1) Operation of Transfer pumps (Pro-4)
Rags
Supplies/Disposables:
Water
Water Usage:
Electricity
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
N/A
N/A
N/A
500 cu yards per year 1,000 pairs per year 2,000 suits per year 600 per year
50,000 gals per year
No
No
No
No
No
1,000 gallons No per year 500 kw No per year
Community Concern
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
N
N
N
N
N
N
N
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume Usage
Low Volume Usage
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Bilge Management SIGNIFICANCE DETERMINATION Potential Impact to the Environment
5-62 N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-19: Flow Diagram and Aspects Form for Bilge Management Treatment & Discharge (continued)
Module
Environmental Aspects
Environmental Aspects
Water Discharges: N/A Stormwater Discharges: N/A Spillage and Other: Waste Water/Oily Water Spillage
Oil/Petroleum Liquids
Water
Sludges
1,000 cu yards No per year
Spillage during transfers (Pro-4), (Pro-8)
500 gals No per year
N/A
N/A
Treatment Sludge (Out-2) 500 No bbls per year 100,000 Waste Water Residual gals per No (Out-3) year 500 Oil/Petroleum Liquids bbls per No (Out-4) year
Tyvex Suites, Gloves, Filter Contaminated Cartigates and Rags Disposables (Out-1)
Wastes:
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
N
N
N
N
N
Spillage is maintained within secondary containment
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Plan · Do · Check/Act
Example 5-19: Flow Diagram and Aspects Form for Bilge Management Treatment & Discharge (continued)
Module
5-63
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-20: Flow Diagram and Aspects Form for
Wastewater Treatment & Discharge
Process Waste Water
Control and Collect Waste Stream Holding Tank
Transfer Waste Stream to Holding or Transport Tanks
Secondary Containment
Is Treatment Required?
Vacuum Tanker Yes
Dispose, Reuse, Recycle - Off-Site
Off-Site
Where will Waste be Treated?
On Site
Transfer Liquids to Treatment Facility
No
Conduct Treatment Process
Sludges
Other Process Treatment Wastes
Water
Dispose, Reuse, Recycle - On-Site
Process Step "Pro"
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module 5-64
Environmental Aspects
Environmental Aspects
Transfer pumps (Pro-3), (Pro-4)
Electricity
Disposables (Pro-3)
Disposables (Pro-3)
Tyvex Suits
Filter Carts
Waste water/oily water
Water Discharges: N/A Stormwater Discharges: N/A Spillage and Other:
Other Treatment Waste
Waste Water
Sludges
Air Emissions: N/A Noise/Odor/Radiation: N/A Wastes:
Treatment Chemicals
Spillage during transfers (Pro-2), (Pro-4)
Waste Chemicals, etc.
Treatment sludges (Prod1) Waste Water derived from Treatment (Prod-2)
Water Treatment Chemicals (Inp-5)
Disposables (Pro-3)
Gloves
Chemicals:
Disposables (Pro-3)
Rags
Water Usage: N/A Supplies/Disposables:
Transfer pumps (Pro-3), (Pro-4)
Diesel Fuel
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Legal Requirements/ Voluntary Commitments, Company Policy
Quantity or Volume
No
No
No
No
No
100 gals Yes per year
N/A
N/A
50 bbls Yes per year 250,000 Yes gals per year 2 bbls Yes per year
N/A
N/A
2,500 gals per year
100 cu yards per year 250 pairs per year 10 cu yards per year 80 per year
N/A
1,000 gals per No year 1,000 KW per No year
Community Concern
No
No
No
No
No
No
No
No
No
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
S
S
S
N
N
N
N
N
N
N
Potential for Spillage into Surface Waters
Waste Disposal regulations
Treatment Facility
Permit to Operate Waste Water Treatment Facility Permit to Operate Waste Water
Low Volume or Usage, NonHazardous chemicals
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low Volume or Usage
Low volume usage
Low volume usage
Rationale for Significance (S) or Non-significance (N) C = control or maintain S = study or investigate I = improve
Objective & Type Target
Area/Process: Wastewater Treatment & Discharge Date: 5/17/01 SIGNIFICANCE DETERMINATION OBJECTIVES &TARGETS
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
Plan · Do · Check/Act
Example 5-20: Flow Diagram and Aspects Form for Wastewater Treatment & Discharge (continued)
Module
5-65
EMS Implementation Guide for the Shipbuilding and Ship Repair Industry
Example 5-21: Flow Diagram and Aspects Form for Waste Management Waste Generation
Non-Hazardous Waste
Non-Hazardous
Perform Waste Classification
Hazardous
Hazardous Waste
Universal
Some Containerize or Package NonRecyclable Wastes as Appropriate for Transport
Is Waste Recyclable?
Is Waste Recyclable?
None
Non-Recyclable
Separate & Segregate Waste Streams
All
Some
All
Recyclable
Containerize or Package Recyclable Wastes as Appropriate for Transport
Separate & Segregate Waste Streams
Recyclable
Containers
Containerize or Package NonRecyclable Wastes as Appropriate for Transport
Non Recyclable
Containers
Transport Containers Waste Management Area(s)
Transport Containers to Non-Hazardous Waste Management Area(s)
Transport Containers to Waste Management Area(s)
On Site Transportation Equipment
On Site Transportation Equipment
Process Waste Streams for Disposal
Process Waste Streams for Recycling
Process Waste Streams for Disposal
Waste Processing Equipment
Waste Processing Equipment
Transport Waste Streams to Appropriate NonHazardous Waste Disposal Facilities
Transport Waste Streams to Appropriate Hazardous Waste Disposal Facilities
Transport Waste Streams to Appropriate Recycling Facilities Off Site Transport Equipment
Disposed NonHazardous Wastes
None
Universal Waste
Off Site Transport Equipment
Recycled Waste
Recycled Hazardous Waste
Process Step "Pro"
Disposed Hazardous Wastes
Output "Out"
Method "Meth"
Input "Inp"
Product "Prod"
Decision
Module 5-66
Environmental Aspects
Environmental Aspects Hazardous Waste (Out-3) Hazardous Waste (Out-4)
Recycled Hazardous Waste
Hazardous Waste
Waste Spillage
Spillage and Other:
Quantity or Volume
No
Less than 1,000 gals per year
N/A
5,000 cu yards per year 25,000 lbs per year 20 tons per year 60,000 lbs per year
N/A
N/A
N/A
Yes
Yes
Yes
Yes
Yes
800 drums Yes per year
N/A
21,000 gals per year
Legal Requirements/ Voluntary Commitments, Company Policy
Spills during transport 200 gals (Pro-7), (Pro-13), (Pro-9), Yes per year (Pro-14), (Pro-9), (Pro-15)
Exposure of waste management areas to rainfall (Pro-4), (Pro-10), (Pro-12)
Non-Hazardous Waste (Out-2)
Recycled Non-hazardous Waste
Water Discharges: N/A Stormwater Discharges: Contaminated Runoff
Non-Hazardous Waste (Out-1)
Drums, Super Sacks, etc. (Inp-4)
Material movement (Pro7), (Pro-8), (Pro-9), (Pro13), (Pro-14), (Pro-15)
Solid Waste Disposal
Chemicals: N/A Air Emissions: N/A Noise/Odor/Radiation: N/A Wastes:
Containers
Water Usage: N/A Supplies/Disposables:
Diesel Fuel/Forklifts
Energy Usage:
Category/Aspect
Inputs, Processes, Outputs, Products
Community Concern
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Pollution Prevention Potential
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Potential Impact to the Environment
S
S
S
S
S
S
S
N
Hazardous Materials and Waste Spill Requirements
Stormwater Regulations
Waste Disposal Requirements
Waste Disposal Requirements
Waste Disposal Requirements
Waste Disposal Requirements
Waste packaging requirements
Low Volume Usage
Rationale for Significance (S) or Non-significance (N)
Area/Process: Waste Management SIGNIFICANCE DETERMINATION
N or S
Person Completing Form: John Smith, Environmental Engineer ASPECT IDENTIFICATION
C = control or maintain S = study or investigate I = improve
Objective & Type Target
Date: 5/17/01 OBJECTIVES &TARGETS
Plan · Do · Check/Act
Example 5-21: Flow Diagram and Aspects Form for Waste Management (continued)
Module
5-67