EPIZOL® - 1 - in accordance with the requirements of. BS EN 1186-1, BS EN
1186-3,. BDS EN 1186-14. EPIZOL® - 1 - has a health assessment of
Designed for making a self-leveling flooring in warehouses and industrial premises of the food, pharmaceutical, tobacco and other industries with average mechanical. loads, special health requirements and spark resistant coating exposed to aggressive environments, petrochemical products. Used in combination with hardener H - 1 in weight ratio EPIZOL® - 1 : hardener H -1 - 100: 24 (Volume 7: 3). Hardening: Surface - 24 hours at 200C Complete (ready for mechanical loads) 7 days Consumption: 1,7 kg/m2 thicknesses of 1 mm 3,2 kg/m2 thicknesses of 2 mm EPIZOL® - 1 - (two component) EPIZOL® - 1 has been tested by accredited testing laboratories: - Minutes of the first type of test product - № 011 - NSIOSSP-03.513/17.06.2005. - Test Center Almi TEST “Ltd - Sofia, with a test on № 021440/17.02.2006 - Laboratory testing of inorganic and organic materials and devices “LINOMI” at VSU “Karavelov - Sofia with a test № IV-367 / 31.03.2002
FLOOR SELF-LEVELLING PUTTY ON THE BASE OF SYNTHETIC EPOXY RESIN EPIZOL® - 1, with quarz 2 - component
• Complies with BS EN 13813 for coating based on synthetic resin type SR - B2, O - A1, 5IR5 C27, 5 - F50 mechanical resistance and stability.
Designed for making a self-leveling flooring in warehouses and industrial premises with average shear exposed to aggressive environments, petrochemical, delete. Used in combination with hardener H - 1 in weight ratio EPIZOL® - 1 hardener H-1 - 100: 17 (Volume 3: 1). Hardening: Surface - 24 hours at 200 C Complete (ready for mechanical loads) 7 days Cost: 2 kg/m2 thicknesses of 1 mm 5 kg/m2 thicknesses of 3 mm EPIZOL® - 1 - quartz was tested by a testing center Almi TEST” Ltd - Sofia, with a test № 02-1438/17.02.2006 the coverage meets the requirements of the Ordinance so that the materials and articles of plastics intended for contact with food.
FLOOR SELF-LEVELLING PUTTY ON THE BASE OF SYNTHETIC EPOXY RESIN EPIZOL® - 1 FLOWER TYPE MOSAIC 2 - component
Use EPIZOL® - 1 or EPIZOL® - 1 quartz. Immediately after application EPIZOL® - 1 or EPIZOL® - 1 is made with quartz layer with color chips, which allows individual decorative self-leveling flooring. After complete solidification of the coating (7 days), it is treated with a Two-component epoxy varnish EP - 78. Treated surfaces are fit for service after 48 hours of varnishing EP - 78.
LACKPROM PLC. Bulgaria Sofia 1252 Village Svetovrachene, 16, Sinchets Str. Phone: (02) 996 41 46 996 30 66 Fax: (02) 996 31 42; 996 31 39 e-mail: [email protected]
e-mail: [email protected]
EPOXY INDUSTRIAL FLOOR COATINGS
• EPOXY PUTTY 2-component • ЕPOXY PRIMER EP – 0710 (SOLVENT-FREE) 2-component • ЕPOXY PRIMER – WATER-SOLUBLE, 2-component • FLOOR SELF - LEVELLING PUTTY ON THE BASE OF SYNTHETIC EPOXY RESIN EPIZOL-1 2-component • FLOOR SELF-LEVELLING PUTTY ON THE BASE OF SYNTHETIC EPOXY RESIN EPIZOL-1, with quarz2-component • FLOOR SELF - LEVELLING PUTTY ON THE BASE OF SYNTHETIC EPOXY RESIN EPIZOL-1,FLOWER TYPE MOSAIC 2-component
They find application in: Storage, service, repair facilities, and parking garages; • Administrative, production, exhibition halls • Enterprise of the food, pharmaceutical, tobacco and other industries. Used wherever sued requirements: • Excellent adhesion to the substrate • Mechanical strength • High durability • Chemical resistance • spark-resistant coating • not slipping and smooth surface • Ease of maintenance and repair • Health Assessment of applicability • ensure long lifetime
EPOXY PUTTY (2 - component) Designed for repair of concrete structures damaged by heavy chemical, mechanical or weather conditions.
EPOXY PUTTY (2-component) • Fills • evens • strengthens • Protects substrate before laying the next coating Used in combination with a hardener for epoxy resin 5 - 6% Life of the mixture: epoxy KIT: HARDENER 90 minutes Curing time: 15 hours at 200C. Consumption: 0,7 m2/kg or 1300 to 1400 g/m2 of thickness 1mm
ЕPOXY PRIMER EP - 0710 (SOLVENT - FREE), 2 - component The primer was tested by an independent accredited laboratory “Building chemistry and insulation” to the ITSS-NISI Ltd - Protocol №731-3-238/23.09.2008
Designed for thick coating, dry (less than 4% moisture) basis. • Fills • Strengthens • Improves adhesive ability of old and new solid substrates (concrete, cement, terrazzo and other) substrates before application of epoxy coatings • Suitable for clear sealing of concrete surfaces without the tendency to yellowing. • Protects new concrete floors of contamination during the installation of equipment. It has excellent adhesion to the substrate, durability, chemical resistance, mechanical stability. • Epoxy Primer EP - 0710 is suitable synthetic solution filled with quartz sand (clean, dry, fraction of 0,1 - 0,6 mm) in weight ratio (1.5 to 2): 10. With so filled solution filled pores, cracks and flattens the uneven concrete surface. • Used in combination with Epoxy hardener H - 3 in weight (volume) ratio of 2: 1. Time for hardening: at 200C 24 hours Life of the mixture: primer / hardener (100 g/200C) 60 minutes Consumption: 200 - 400 g/m2
ЕPOXY PRIMER WATER-SOLUBLE, 2 - component The primer was tested by an accredited laboratory “Building chemistry and insulation” to the ITSS-NISI Ltd - Protocol № 730-3-237/23.09.2008 g. It is designed for coating of concrete, cement or other substrates before application of epoxy coatings. Apply on wet basis or crude “fresh” concrete (5 - 6 days). • Strengthens heart, through the formation of network structure and endurance • stops the release of dust • increases the adhesion force between concrete and epoxy top coating - no solvents or water emulsion systems. • Available in Set with Epoxy Hardener HW - 71 inclusive primer ratio of 1: 1 inclusive hardener HW - 71: 1 including water Life mix primer / binder / water - up to 90 minutes at 200C Curing time at 200C within 24 hours Consumption 200-300 g/m2
FLOOR SELF - LEVELLING PUTTY ON THE BASE OF SYNTHETIC EPOXY RESIN EPISOL - 1 2 - wcomponent EPIZOL® - 1 in accordance with the requirements of BS EN 13813 for coating based on synthetic resin type S-B2, O-A1, 5IRS - C27, 5 - F50 mechanical resistance and stability. EPIZOL® - 1 - in accordance with the requirements of BS EN 1186-1, BS EN 1186-3, BDS EN 1186-14 EPIZOL® - 1 - has a health assessment of applicability № 3073-1145/17.06.2004