Fostex Catalog V10.vp - Madisound

Visit our web page for more specifications and cabinet designs. www.madisound.com & www.fostex.jp Fs Qts Vas Power dB Frequency Xmax Box Liter Hz Ltrs Watts Range mm P Sealed/Vented F3 Hz Worlds First Pure Magnesium Dome Tweeter 8 150 90 1.5kHz-50kHz T250D pure magnesium dome FT SERIES RIBBON TWEETER - Patented “Regulated Phase” Full surface drive diaphragm. 8 80 93 3.5K-45kHz FT7RP ribbon tweeter FT SERIES DOME TWEETER 8 60 90 3K-40kHz FT207D dome tweeter, grill, Shielded 8 40 90 2.5K-50kHz FT28D dome tweeter 8 50 93 2K-30kHz FT48D dome tweeter FT SERIES HORN TWEETER 8 30 98.5 5K-50kHz FT17H horn tweeter 8 50 100 3K-33kHz FT96H horn super tweeter, alnico magnet T SERIES HORN TWEETERS, ALNICO MAGNET 8 50 106 7K-35kHz T90A top mount, super tweeter, alnico magnet 8 50 108 6K-40kHz T925A top mount, super tweeter, alnico magnet 8 50 110 4K-45kHz T500AMK2 top mount, super tweeter, alnico 8 60 106 5K-38kHz T900A top mount, super tweeter, alnico magnet This is two brass dowels like the wooden ones. P-30 Brass top mount tweeter stand F SERIES ALNICO MAGNET- Suitable for folded horn enclosures. Mica composite coated cones. 8 65 0.44 9.87 30 89 Fo-20kHz 1.5 6S/12V 105/58 F120A 4.5” full range, alnico magnet 8 30 0.32 98.96 80 90 Fo-20kHz 2.0 25S/38V 67/45 F200A 8” full range, alnico magnet FX SERIES - Bio-cellulose cone made from kenaf with special mica composite coating 8 70 0.45 8.21 30 89 Fo-20kHz 2.0 5.4S/11V 111/60 FX120 5” full range FE SIGMA “E” SERIES FULL RANGE DRIVERS - Suitable for folded horn enclosures. 8 77 0.30 5.7 24 90 Fo-23kHz 0.28 Horn fs FE108EΣ; 4” full range 8 51 0.26 23.7 80 94.5 Fo-21kHz 1.6 Horn fs FE168EΣ; 6.5” full range 8 42 0.18 60.1 120 97 Fo-14kHz 1.25 Horn fs FE208EΣ; 8” full range FE- E SERIES - Suitable for folded horn enclosures, banana pulp cones. 8 140 0.78 1.293 10 88 Fo-20kHz 0.15 Folded Horn fs FE83En 3” full range 8 80 0.35 6.89 15 89 Fo-22kHz 0.6 Folded Horn fs FE103En 4” full range 8 70 0.25 9.95 45 93 Fo-25kHz 0.35 Folded Horn fs FE126En 4.5" full range 8 50 0.21 45.11 65 94 Fo-22kHz 1.0 Folded Horn fs FE166En 6.5” full range 8 39 0.18 54.5 90 96 Fo-20kHz 0.8 Folded Horn fs FE206En 8” full range FF-WK SERIES - Double layer of Kenaf and Bincho cone and Up-Roll Surrounds 8 115 0.55 15 86.58 Fo-28kHz Sealed/Vented fs FF85WK 3” full range 8 75 0.41 30 88 Fo-25kHz Sealed/Vented fs FF105WK 4” full range 8 67 0.42 50 89 Fo-22kHz Sealed/Vented fs FF125WK 4.5" full range 8 50 0.34 90 92 Fo-21kHz Sealed/Vented fs FF165WK 6.5” full range 8 44 0.35 100 93 Fo-17kHz Sealed/Vented fs FF225WK 8” full range FW SERIES - Hybrid pulp cone woofers 8 55 0.26 4.09 50 86 Fo-10kHz 1.9 0.7S/1V 148/93 FW108N 4” wide range woofer, 1.6" VC 8 40 0.16 14.25 100 89 Fo-9kHz 0.5 4S/5V 200/80 FW168N 6.5” woofer, 2.56" VC 8 45 0.35 15.1 100 88 Fo-10kHz 2.65 FW168-HR 6.5" wide range woofer, 1.37" VC 8 29 0.2 43.42 100 90 Fo-5kHz 6.5 4.1S/7V 99/68 FW208N 8” woofer, 3" VC 8 25 0.25 254 125 95 Fo-2kHz 4.8 FW305 12" woofer, 5" VC 8 25 0.28 227.01 150 93 Fo-3kHz 6.5 W300AII 12" woofer, alnico magnet, 3" VC 8 27 0.45 392.5 150 92.5 Fo-2.5kHz 7.9 113S/170V 50/37 FW405N 15" woofer, 3" VC 8 25 0.31 310 200 94 Fo-2.5kHz 5.5 90V/120V 45/40 W400A-HR 16" woofer, alnico mag., 3.9" VC 8 18 0.69 3201 450 96 Fo-1.5kHz 2.3 Inf. Baffle Fo FW800HS 31.5” super woofer, 3.9" VC ATTENUATOR 8 100 Attenuation 0-40dB R80B L-pad 8 200 Attenuation 0-40dB R82B L-pad 8 100 Attenuation 0-21dB in 1dB steps R100T transformer type Commercial Use Horn Tweeters for PA or Professional Sound Systems 26.57" Wide by 9.05" Tall by 15.07" Deep, Natural Maple, Driver not included H200 Wooden Horn, 2" throat, 240Hz 15.59" Wide by 4.72" Tall by 8.9" Deep; Natural Maple, Driver not included H400 Wooden Horn, 1" throat, 455Hz 8 800 3.5 pounds 60 104 850Hz - 20kHz Titanium diaphragm D1405 Compression Horn Driver, alnico 8 650 7.6 pounds 60 104 750Hz - 20kHz Titanium diaphragm D1400 Compression Horn Drivers, alnico Model

Imp. W

Price Each $291.85 $104.00 $47.45 $68.20 $96.25 $42.40 $130.90 $186.95 $336.25 $899.50 $465.80 $109.00 $252.15 $487.70 $125.40 $112.65 $180.60 $215.00 $34.65 $43.80 $49.95 $74.35 $102.40 $37.85 $47.65 $54.50 $80.95 $111.75 $130.90 $169.20 $253.30 $193.60 $266.30 $780.45 $562.95 $2,814.00 $3,464.00 $28.05 $48.80 $222.75 $2895.15 $623.80 $347.00 $596.20

Protective Grills

Copper Foil/Tin Foil & PPTA Film Capacitor

The Fostex CS capacitors are made from separate layers of Copper Foil, Tin Foil and PPTA Film (poly p-phenylene terepthalamide). The CS caps have solid copper leads. These caps are very densely wrapped, Metal mesh grills with plastic outer housing. Comes more than twice the weight of similar value capacitors. with mounting hardware. We don't have grills for the Non-inductive. 120VAC / 240VDC stamped frame 6" units. Unit K308 KG810 K312 KG816 KG820

Description Price Pair FE83En, FF85WK $41.50 FE108EZ, FW108N $33.75 FE126En, FF125WK $28.75 FE168EZ, FW168N, FW168HR $57.00 FE208EZ, FW208N $77.05

T250D $291.85

Unit 0.33 0.47 0.68 1.00 1.50 2.20 3.30

Size mm 14 Ø x 37 16 Ø x 37 19 Ø x 37 20 Ø x 37 18 Ø x 62 21 Ø x 62 25 Ø x 62

Price $31.25 $33.30 $38.30 $44.70 $47.20 $58.15 $75.25

FW168HR $253.30 • • • • •

• • • • • • • •

• • • • •

Pure Magnesium dome Triple magnet Silver/copper VC wire Tangential surround 1500Hz to 50KHz 8 ohm impedance Fs 800Hz 90dB World's First Pure Magnesium Dome Tweeter High power magnetic circuit by using a copper plated yoke and top plate, along with a three 90mm ferrite magnets. Silver/Copper alloy voice coil wire and internal wiring Up down roll tangential surround is used to realize less anti-resonance and superior amplitude characteristic. High density resin frame designed to minimize the distance between the tweeter and woofer.

• • • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

8 7.1 .007 45 3.25 0.38 0.35 15.7 0.83

ohm ohm mH Hz

g mm/N

6.5” WIDE RANGE HP shell diaphragm Hybrid pulp cone UDR surround/spider Frequency response from 45Hz to 12kHz 88dB sensitivity Flange 190 mm Cutout 146mm Depth 86mm

Sd BL Vas Xmax VC Ø Sensitivity 1W / 1m Nom. Power Net weight

0.011 8.98 15.1 2.65 35

m2 N/A ltrs mm peak mm

88 100 3640

dB W g

FT7RP

$104.00

• RIBBON TWEETER • 8 ohm impedance • Frequency response • • • •

Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

8 3000 -

FT28D

ohm ohm mH Hz

g mm/N

$68.20


8 1000 -

ohm ohm mH Hz

g mm/N

93 80 155

cm2 N/A ltrs mm peak mm dB W g

• DOME TWEETER • 8 ohm impedance • 1kHz to 50kHz

• • •

• • • •

$47.45

from 3kHz to 45kHz 93dB sensitivity at 1w/1m (3.3ft) Flange 76mm x 86mm Cut-out 50mm Depth 32mm


•

FT207D


FT48D

8 1000 -

ohm ohm mH Hz

g mm/N

$96.25

frequency response 90dB sensitivity at 1w/1m (3.3ft) Flange 90mm x 78mm Cut-out 70mm Depth 32.8mm


90 40 528



• • • • • • • • •


8 800 -

ohm ohm mH Hz

g mm/N

DOME TWEETER 20mm textile dome Shielded magnet Frequency response from 3kHz to 40kHz 90dB sensitivity at 1w/1m (3.3ft) Flange 95mm round Cut-out 70 mm Depth 34.4mm 90 60 390


DOME TWEETER 8 ohm impedance 33mm Dome Frequency response from 800kHz to 30kHz 93dB sensitivity Felt front Flange 128mm Cut-out 90mm Depth 38.7mm


93 50 978


FT17H

$42.40

FT96H

• HORN SUPER TWEETER

$130.90

• • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

8 5000 -

T90A

ohm ohm mH Hz

g mm/N

$186.95

• • • • 8 5000 -

ohm ohm mH Hz

g mm/N

98.5 30 340


• HORN SUPER • •


from 5kHz to 50kHz 98.5dB sensitivity at 1w/1m (3.3 ft) Flange 87mm Cut-out 63mm Depth 38.5mm


TWEETER 8 ohm impedance Frequency response from 5kHz to 35kHz 106dB sensitivity at 1w/1m (3.3ft) TOP MOUNT Flange 60 mm Depth 74.1/ 87.8 mm


106 50 800


TWEETER

• 8 ohm impedance • Frequency response

• 8 ohm impedance • Frequency response •

• HORN SUPER

• • • • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

T925A

8 4000 -

ohm ohm mH Hz

g mm/N

$336.75

4kHz to 33kHz 100dB sensitivity 1w/1m Alnico magnet Flange 68mm square Cut-out 60mm Depth 60mm


100 50 600


• HORN SUPER TWEETER

• 8 ohm impedance • Frequency response • • • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

8 5000 -

ohm ohm mH Hz

g mm/N

from 5kHz to 40kHz 108dB sensitivity at 1w/1m (3.3ft) TOP MOUNT Flange 82 mm Depth 91/ 108mm


108 50 2.0

cm2 N/A ltrs mm peak mm dB W Kg

T500AMKII

$899.50 • • • • • • • •

Znom fs Sensitivity 1W / 1m

F120A

8 4000 110

ohm Hz dB

$252.15

Nom. Power 50 W Net weight 5.0 Kg Recommended x-over frequency more than 7kHz (12dB/Oct.)

• • • • • • • •


8 7 65 3.1 .51 .44 4.7 -

ohm ohm mH Hz

g mm/N

Horn Super Tweeter Pure Magnesium diaphragm Silver/Copper VC wire Frequency response from 4kHz to 45kHz 110dB sensitivity Copper terminals Solid Brass horn body Double alnico magnets

5” FULL RANGE Alnico Magnet 8 ohm impedance Frequency response from 65Hz to 20kHz 89dB sensitivity Flange 137 x 123mm HEXAGONAL Cut-out 103mm Depth 88mm


9.87 1.5 89 30 2.0


T900A

$465.80

• HORN SUPER • • • • • •


F200A

8 -

ohm ohm mH Hz

g mm/N

$487.70


• • • • • • • •


8 7.3 30 2.63 0.36 0.32 18.6 -

ohm ohm mH Hz

g mm/N

TWEETER 8 ohm impedance Frequency response from 5kHz to 38kHz 106 dB sensitivity 1w/1m TOP MOUNT Flange 82mm Depth 81.8mm/ 98.3mm 106 60 3.55


8” FULL RANGE Alnico magnet 8 ohm impedance Frequency response from 30Hz to 20kHz 90 dB sensitivity Flange 213 X 194mm HEXAGONAL Cut-out 182 mm Depth 123.7 mm


98.96 2.0 90 80 4.4

cm2 N/A ltrs mm peak mm dB W kg

FX120

$125.40

• 5” FULL RANGE • KENAF paper/ fiber • • • • •


8 7.3 70 8.4 0.47 0.45 5.3 -

ohm ohm mH Hz

g mm/N

FE168EΣ $180.60


8 6.8 .056 51 5.328 0.27 0.26 8.7 1.278

ohm ohm mH Hz

g mm/N

$112.65 • • • • •

composite cone 89db sensitivity Frequency response from 70 Hz to 20kHz Flange 137 x 123mm HEXAGONAL Cut-out 103 mm Depth 54.5 mm


• • • • •

FE108EΣ

8.21 2.0 -

cm2 N/A ltrs mm peak mm

89 30 1.32

dB W kg

6.5” FULL RANGE HP shell diaphragm Banana pulp cone UDR surround Frequency response from 51Hz to 21kHz 94.5dB sensitivity Flange 190 mm Cutout 146mm Depth 88mm


0.0113 8 23.7 1.6 30 94.5 80 2600

m2 N/A ltrs mm peak mm dB W g


8 6.8 .038 77 7.79 0.32 0.3 2.7 1.59

ohm ohm mH Hz

g mm/N

FE208EΣ $215.00


• • • • • • • • •


8 6.4 0.051 42 6.19 0.19 0.18 13.3 1.069

ohm ohm mH Hz

g mm/N

4” FULL RANGE HP shell diaphragm Banana pulp cone UDR surround Frequency response from 77Hz to 23kHz 90dB sensitivity Flange 128 mm Cutout 98mm Depth 65mm 0.005 5.2 5.7 0.28 20


90 24 1200

dB W g

8” FULL RANGE HP shell diaphragm Banana pulp cone UDR surround Frequency response from 42Hz to 14kHz 97dB sensitivity Flange 230 mm Cutout 182mm Depth 93.5mm


0.0201 10.8 60.1 1.25 35 97 120 4800


FE83En

$34.65

• • • • • • • •


8 7.5 0.0267 165 4.06 1.057 0.84 1.53 0.622

FE126En


8 7.2 0.035 83 4.8 0.33 0.3 2.8 1.35

ohm ohm mH Hz

g m/N

3” FULL RANGE ES banana pulp cone New center cap Frequency response from 150 Hz to 20kHz 88dB sensitivity Flange 83mm Cut-out 71mm Depth 40.2mm


.00283 3.35 0.7 0.15 16 88 7 350


$49.95 •

4.5” FULL RANGE ES banana pulp cone New center cap 8 ohm impedance 93 db sensitivity Frequency response from 70 Hz to 15kHz • Flange 117mm • Cut-out 103mm • Depth 61mm

• • • • •

ohm ohm mH Hz

g m/N


0.0065 5.63 8.5 0.35 20 93 45 990


FE103En

$43.80 • • • • • • • • •


8 7.5 0.0398 83 2.747 0.377 0.33 2.55 1.65

FE166En


8 7.2 0.052 53 3.426 0.266 0.25 6.8 1.474

ohm ohm mH Hz

g m/N

4” FULL RANGE ES banana pulp cone New center cap 8 ohm impedance Frequency response 70 Hz to 18kHz 89dB sensitivity Flange 107mm Cut-out 92mm Depth 43.6mm


0.005 4.99 5.95 0.6 20 89 15 580


$74.35 •

6” FULL RANGE ES banana pulp cone New center cap 8 ohm impedance 94 db sensitivity Frequency response from 50 Hz to 22kHz • Flange 166mm • Cut-out 144mm • Depth 73.2mm

• • • • •

ohm ohm mH Hz

g m/N


0.0133 7.65 37.02 1.0 25 94 65 1600


FE206En $102.40


8 6.8 0.052 45 4.57 0.194 0.19 12.2 1.172

FF105WK

ohm ohm mH Hz

g m/N

$47.65

• • • • •

8” FULL RANGE ES banana pulp cone New center cap Large 110mm magnet Frequency response from 39 Hz to 20kHz • Flange 208 mm • Cut-out 182 mm • Depth 87.5 mm Sd BL Vas Xmax VC Ø Sensitivity 1W / 1m Nom. Power Net weight

• • • 8 6.7 0.041 75 4.203 0.463 0.41 3.4 1.346

ohm ohm mH Hz

g mm/N

96 90 3200


• 4" FULL RANGE • Layered paper cone with • •


0.0206 10.65 70.99 0.8 35

FF85WK

$37.85 •


8 7.2 0.032 115 3.298 0.683 0.55 2.0 0.909

FF125WK

ohm ohm mH Hz

g mm/N

0.005 4.823 4.848 1.7 20 88 30 800


•

dB W g


8 6.7 0.044 67 5.091 0.464 0.42 5.0 1.153

ohm ohm mH Hz

g mm/N

wood pulp and charcoal impregnated kenaf Ridged alloy dust cap Blended urethane positive roll surround Flange 83mm Cut Out 73mm Depth 46.7mm


$54.50 •



3" FULL RANGE

• Layered paper cone with

0.0028 3.93 1.036 0.35 16 86.5 15 450


5" FULL RANGE Layered paper cone with wood pulp and charcoal impregnated kenaf Ridged alloy dust cap Blended urethane positive roll surround Flange 117mm Cut Out 104mm Depth 61.3mm


0.0066 5.596 7.265 1.65 25 89 50 920


FF165WK

$37.85 • • • • • • •


8 6.5 0.056 50 4.19 0.373 0.34 9.5 1.068

FW108N

ohm ohm mH Hz

g mm/N


$130.90 • • • • • • • • •


8 6.3 55 8.8 0.27 0.26 6.9 -

ohm ohm mH Hz

g mm/N

6.5" FULL RANGE Layered paper cone with wood pulp and charcoal impregnated kenaf Ridged alloy dust cap Blended urethane positive roll surround Flange 166mm Cut Out 146mm Depth 76.6mm 0.0132 7.227 27.838 1.85 35 92 90 1095


4” WIDE RANGE Hybrid pulp cone 8 ohm impedance 86 db sensitivity 1.6" Voice Coil Frequency response from 55 Hz to 10 kHz Flange 128 mm Cut-out 100 mm Depth 72 mm


4.09 1.9 40


86 50 1.69

dB W kg

FF225WK

$37.85 •


8 6 0.068 44 2.31 0.409 0.35 18.4 0.826

FW168N

ohm ohm mH Hz

g mm/N

8 5.9 40 15.67 0.17 0.16 28 -

$169.20 • • • • • •

ohm ohm mH Hz

g mm/N



• • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

8" FULL RANGE

• Layered paper cone with

0.022 8.488 57.898 2.25 50 93 100 3520


6.5” WIDE RANGE Hybrid pulp cone 8 ohm impedance 89 db sensitivity 2.5" Voice Coil Frequency response from 40 Hz to 9 kHz Flange 180 mm Cut-out 148 mm Depth 87 mm


14.25 0.5 65 89 100 2.9

cm2 N/A ltrs mm peak mm dB W kg

FW208N


8 5.8 29 13.2 0.21 0.20 40 -

FW405N

$193.60 •

8” WOOFER Hybrid pulp cone 8 ohm impedance 90db sensitivity 3" Voice Coil Frequency response from 29 Hz to 5 kHz • Flange 230 mm • Cut-out 182 mm • Depth 94.8 mm

• • • • •

ohm ohm mH Hz

g mm/N


$562.95 •

43.4 6.5 81


90 100 4.62

dB W kg

15” WOOFER

• Hybrid pulp cone, fiber

FW305


$266.30

8 6.6 25 2.73 0.28 0.25 55 -

ohm ohm mH Hz

g m/N

W300AII $780.45

+ carbon, tree pulp

• 94.7db (2.83V@1M) • 3" Voice Coil • Frequency response

8 ohm 6.89 ohm 0.64 mH 27 Hz 6.76 0.48 0.45 100.8 g 0.344mm/N


0.089m2 15.7 N/A 392.5 ltrs 7.9 mm peak 80 mm 92.5 dB 150 W 10.0 k g (22 lb)

12” WOOFER Hybrid pulp cone 95db (2.83V@1M) 5" Voice Coil Cast Frame Frequency response from 25 Hz to 3.5 kHz • Flange 312 mm 12.28" • Cut-out 278 mm 10.95" • Depth 120.5 mm 4.75" Sd BL Vas Xmax VC Ø Sensitivity 1W / 1m Nom. Power Net weight


8 7 0.1 25 9.17 0.29 0.28 92.7 0.056

ohm ohm mH Hz

g mm/N

254 4.8 130


95 dB 120 W 5.0 k g (11 lb)

• 12” Woofer • 2.42 lb Alnico magnet • Fine ceramics • • • • • •

from 27 Hz to 2.5 kHz • Flange 395 mm 15.5" • Cut-out 350 mm 13.75" • Depth 162 mm 6.4" Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

• • • • • •

multi-coated paper cone Double roll surround 3" diameter VC 93db sensitivity Flange 317mm Cut-out 278mm Depth 180mm


539 18.75 227 6.5 80 93 150 13.9

cm2 N/A ltrs mm peak mm dB W lb

W400A-HR $2,814.00 • • • • • • • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

R80B

8 6 2.64 25 8.2 0.32 0.31 130 0.33

ohm ohm mH Hz

g mm/N

$28.05

15” Woofer 6.83 lb Alnico magnet Rigid HR radial whizzy hybrid paper cone UDR tangential surround and spider 94db sensitivity Flange 395mm Cut-out 350mm Depth 242mm


820 19.5 310 5.5 100 94 200 47.18


FW800N $3,464.00 • • • • • • • • Znom Re Le@1kHz fs Qms Qes Qts Mms Cms

8 6.8 18 8.5 0.76 0.69 440 -

ohm ohm mH Hz

g mm/N

31.5” SUPER WOOFER Hybrid pulp cone 96db sensitivity 8 ohm impedance Frequency response from 18 Hz to 1.5 kHz Flange 800mm Cut-out 748mm Depth 291mm


3201.1 2.3 96 450 45.65


• 8 ohm Attenuator • Attenuation 0 to 40 db or more • Input 100 watts • Flange 50 x 50 mm SQUARE • Depth 71 mm

R82B

$48.80

• 8 ohm Attenuator • Attenuation 0 to 40 db or more • Input 200 watts • Flange 50 x 50 mm SQUARE • Depth 89 mm

R100T

$222.75

• Transformer type • • • •

Attenuator Attenuation 0 to 21 db (1 db step) Input 100 watts Flange 88mm x 90mm Depth 170mm

H400 Wooden Horn and D1405 Horn Driver. Cutoff frequency of H400 is 455Hz, 1" throat. Dimensions: 15.59" W x 4.72" T x 8.9" D - Natural Maple

H400 Horn is $623.80 each (driver not included). D1405 Driver $347.00 each, D1400 Driver $596.20 each.

Cabinet plans available on our website.

www.madisound.com