FSL-LARGE FLOODLIGHT FL-41010.1 - Philips Lighting Luminaires

FSL-LARGE FLOODLIGHT

400-1500 watt Metal Halide 400-1000 watt High Pressure Sodium 400-875 watt Pulse Start Metal Halide JOB NAME TYPE

The Large Floodlight is the right choice for applications requiring high light levels such as tennis courts, building perimeters and large parking lots.

ORDERING MATRIX SAMPLE CATALOG NUMBER: FSL10XMMT-ISF-HSC-LP

–

FSL FAMILY FSL

–

MOUNTING BLANK – Yoke Mount ISF – Integral Slipfitter 2-3/8" tenon

LAMP SOURCE M – Metal Halide S – High Pressure Sodium P – Pulse Start Metal Halide (Ballast option must also be specified)

WATTAGE 400 – 400 750 – 75030 (HSC optics only) 875 – 87530 (HSC optics only) 10X – 1000 15X – 15001 (General, HSC, or NHP optics only)

–

VOLTAGE 48 – 480 MT – 120/208/ 240/277 TT – 120/277/ 347 5T – 120/208/ 240/277/ 48098

ACCESSORIES (order separately)

OPTICS BLANK – General Distribution (6x6) HSC – Horizontal Site Cutoff (7x6) NHP – Narrow Hiperformance Optics (3x4) MHP – Medium Hiperformance Optics (7x6)29 WHP – Wide Hiperformance Optics (6x3)29

OPTIONS (add as suffix) CUL – UL Listed to meet CSA standards LP – Lamp with fixture PCR – Photo Control Receptacle13 PSC – Pulse Start CWA PT3 – 3' Pre-wired Cord PT6 – 6' Pre-wired Cord Q – Quartz Stand-by39, 99 QEM – Quartz Emergency40, 99 QTD – Quartz Time Delay39, 99 WDF – Wired Double Fuse45 WSF – Wired Single Fuse46

CAB - Crossarm Bracket PSF - Post Top Slipfitter EPSF - Economy Post Top Slipfitter VSFSL - Vandal Shield PWB - Pipe/wall bracket PC-MT - Photo Control Twist lock, multi-volt (must have PCR option) PC-48 - Photo Control Twist lock 480 volt (must have PCR option) PCR-SC - PCR Shorting Cap VFSL - Top Visor GGFSL - Glare Guard FSF - Single Fuse Holder only FDF - Double Fuse Holder only WGFSL - Wire Guard (For additional descriptions of Floodlight accessories refer to sheet number OA-50010.)

Footnotes: 1 Metal Halide only. 2 High Pressure Sodium only. 13 Order twist lock photo control separately. 29 BT37 or ED37 lamps required. 30 Pulse Start Metal Halide only. 39 Pre-wired by factory. 40 Requires 120 volt secondary power supply. 45 Use with 208, 240 and 480 volt. 46 Use with 120, 277 and 347 volt. 98 Available in 250, 400, or 1000 watt. 99 Not available with HSC or MHP optics. General Notes: All options factory installed. Mogul base lamp only. All accessories are field installed.

Warning: Refer to and follow the lamp manufacturer’s warnings and instructions.

DIMENSIONS

ENERGY DATA HIGH PRESSURE SODIUM 11-7/8" (301.6 mm)

CWA BALLAST INPUT WATTS 400 watt–464 watts 1000 watt–1100 watts

21-5/8" (549.3 mm)

ISF 28" (711.2 mm)

5" (127 mm)

22" (558.8 mm)

YOKE 26-3/8" (669.9 mm)

4" (101.6 mm) 3-1/2" (88.9 mm) 9/16" HOLES (3) 3" (76.2 mm)

EPA = 2.6 sq. ft. WEIGHT = 70 lbs. (max.)

FL-41010.1

FSL-LARGE FLOODLIGHT

METAL HALIDE CWA BALLAST INPUT WATTS 400 watt–458 watts 1000 watt–1080 watts 1500 watt–1605 watts

PHOTOMETRICS CATALOG NUMBER: TEST NUMBER: LAMP: WATTAGE: LUMENS: TILT ANGLE: MOUNTING HEIGHT:

0

1 10

FSL10XM 26086 METAL HALIDE 1000 110,000 45° 30 FEET

5

2

2 1

3

4 .2 2

1

0

MOUNTING MULTIPLIER HEIGHT 0.56 40' 0.74 35' 1.00 30' 1.44 25' 2.25 20' 4.00 15'

ADDITIONAL TEST NUMBERS

.5

3

LIGHT LEVEL MULTIPLYING FACTORS

1

2

3

UNITS SHOWN IN TERMS OF MOUNTING HEIGHT INITIAL FOOTCANDLES SHOWN

DESCRIPTION/CATALOG NUMBER FSL10XS FSL10XM-HSC FSL10XS-HSC FSL10XM-NHP FSL10XS-NHP

TEST NUMBER 26884 26719 26715 26778 26780

PRODUCT FEATURES UL 1598 Listed suitable for wet location and 25°C ambient for all lamp wattages listed. IP65 rated (yoke mount only).

2

1

1. Sturdy one piece die cast aluminum housing with internal hinge. 2. One piece die cast aluminum door has stainless steel, captive door fasteners for easy maintenance. 3. Door has tempered glass lens which is thermal shock and impact resistance.

3 5

4. “Slant 2” heat-sinked ballast mounting geometry for cooler operation. 5. Reflector is one piece diffused anodized aluminum. 6. Dark bronze polyester powder finish for excellent impact, corrosion and UV resistance. 7. Choice of mountings: adjustable yoke mount (standard) or integral slipfitter mount (optional).

4 6 7

Visit our web site at www.daybritelighting.com 776 South Green Street Tupelo, MS 38804 Phone: 662-842-7212 Fax: 662-841-5501

FL-41010.1

189 Bullock Drive Markham, Ontario Canada L3P 1W4 Phone: 905-294-9570 Fax: 905-294-8911 Day-Brite Lighting reserves the right to make changes without notice.©August 2007. DL2.5M0807

a Genlyte company