GS-Series catalog - Promach Inc. | Machine Tools

0 downloads 203 Views 2MB Size Report
Fax: +886 4.2527.3365. Skype: promach. Line: promachsales. Tel: +886 4.2527.3315 www.promach.com. E-mail: sales@promach.
No. 33, Lane 199, Yuan Huan South Road, Feng Yuan, Taichung, Taiwan 420 R.O.C. Tel: +886 4.2527.3315 Fax: +886 4.2527.3365 www.promach.com Skype: promach E-mail: [email protected] Line: promachsales

Simultaneous five axes control and twin synchronous spindles. The simultaneous control of 5 axes gets machining part production times by full synchronization of main and back spindles.

Speical Features: 1. The simultaneous control of 5 axes permits minimum part production times. 2. Flexible vertical holder system with 5 turning and 12 live tools. 4 station for front machining and 4 stations for back machining. 3. Main spindle with C axis function. 4. The 3 axes linear turret is ideal for chip discharge and offers an extreme rigidity. 5. The mineral stone base guarantees the best dam ping capacity and best finishing surface.

GS-42M

GS-42MM

GS-42MS

GS-42M: It is for the basic turning and milling machine that can handle single part or small lot complex parts.

GS-42MM: For the short cycling time parts, the tailstock can cut the internal part simultaneously to reduce the machine time about 40%. The inclined bed is ideal for chip discharge and offers an extreme rigidity.

GS-42MS: The full synchronization of main and back spindles can cut both and finished part without any fixture.

Available Accessories:

Linear Live Tools Turret

Spindle hydraulic brake

Hydraulic chuck

Precision Spindle

The turret provides quick tool change and reduce no-cutting time by linear transverse. The live tools are powerful enough to cut even stainless steel bar up to 42 mm.

The two steps hydraulic brake that can ensure the smooth C axis motion for machining in light braking force. The heavy braking can stop and take all the vibration from milling operations.

The standard hydraulic collect chuck controlled by a foot switch for efficient clamping. For the optional jaws chuck, inward or outward clamping can be set by parameters.

The cartridge type is conveniently removed allowing for convenient servicing. The spindle runs on class P4 precision bearings providing high axial thrust capability. This ensures high precision during heavy duty turning

8” Hydraulic jaws chuck The optional jaws chuck controlled by a foot switch for efficient clamping. The inward or outward clamping can be set by parameters.

All axes are rigid linear guides The six blocks support gives the highest rigidity and accuracy among similar specifications machines.

Chip conveyor

Part catcher

The standard chip conveyor brings out all the chips efficiently and let the cutting area clean.

The standard part catcher makes the whole process more smoothly.

Machine Specification: Specifications Max.Turning Diameter Max.Turning Length Stroke of X / Z / Y Stroke of X1 Stroke of Z1 Spindle Bore Max through hole Main Spindle Nose Main Spindle speed Main Spindle Power Sub Spindle Bore Sub Spindle Nose Sub Spindle speed Sub Spindle Power

Unit mm mm mm mm mm mm mm rpm KW mm rpm KW

Number of fixed tools Turning tool diameter Boring tool diameter Number of live tools Power of live tools Tailstock X axis servo motor Y axis servo motor Z axis servo motor X1 axis servo motor Z1 axis servo motor Rapid Transverse Coolant Tank Capacity Coolant Pump Hydraulic Pump Dimension N.W. / G.W.

mm mm KW KW KW KW KW KW M/min L HP HP M KG

GS-42M GS-42MM Ø130 Ø130 160 160 225 / 235 / 385 225 / 235 / 385 N/A 350 N/A 220 Ø56 Ø56 42 42 A2-5 A2-5 40-6,000 40-6,000 7.5 7.5 N/A N/A N/A N/A N/A N/A N/A N/A 5 Turning 5 Turning +4 I.D +4 I.D 20 16&20 Ø25 Ø25 8 8 1.5 1.5 N/A 5 I.D Tools 1 1 1 1 1 1 N/A 1 N/A 500W 15 15 140 140 1/4+1 1/4HP+6Bar 1 1 3.3 x 2.3 x 2.2 4.3 x 2.3 x 2.3 3000/3500 3500/3800

GS-42MS Ø130 160 225 / 235 / 385 N/A 350 Ø56 42 A2-5 40-6,000 7.5 Ø39 A2-4 40-3,000 3 8 Turning +7 I.D 20 Ø25 10 1.5 N/A 1 1 1 N/A 1 15 180 1 1 4.3 x 2.3 x 2.3 4500/5000

Standard Accessories: 1. Operative Lamp 2. Tool Box 3. Tapping Shaft 4. Drilling Shaft 5. Automatic Lubricant System 6. Par Catcher 7. Chip Conveyor 8. Side Milling + Front Side Milling Optional Accessories: 1. Bar Feeder-1.2M 2. Bar Feeder-1.5M (Fedek DH-65L) 3. Bar Feeder-3.2M (Fedek SN542) 4. Change to hydraulic 3-jaws chuck for main spindle speed 40-4000rpm 5. Air Conditioner 6. 2 GB CF Card 7. Oil Mist Collector 8. FANUC 0iTD controller 9. Oil Skimmer 10. Transformer

Made in Taiwan Promach Inc. No.33, Lane 199, Yuan Huan South Road, Feng Yuan, Taichung, Taiwan 42041 R.O.C Tel: +886 4.2527.3315 E-mail: [email protected] Fax: +886 4.2527.3365 Line: promachsales Skype: promach www.promach.com