Hydraulic kit and accessories for tractor trucks - GIF Modul Kft

Hydraulic kit and accessories for tractor trucks

EXAMPLE DIAGRAMS

Tipping valve fitted onto tank with or without return filter

Tipping valve fitted onto the chassis with or without return filter pag.2 O.M.F.B. S.p.a. Hydraulic Components

We reserve the right to make any changes without notice. Edition 2012.09 No reproduction, however partial, is permitted. Via Cave, 7/9 25050 Provaglio d’Iseo (Brescia) Italy Tel.: +39.030.9830611 Fax: +39.030.9839207-208 Internet:www.omfb.it e-mail:[email protected]

HOW TO SET UP YOUR OWN HYDRAULIC KIT STEP 1 With this booklet it is possible to easily configure your own desired hydraulic kit. You can start with selecting a preassembled hydraulic kit (see at page 4)... To order separately

089-700-XXXXX A B C D E F G H I L M N O

100-001-71101 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208

Q.ty

N-FORCE BLOCK VERSION WITH UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 120 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50 x 64mm L= 2mts

1 1 1 1 1 1 1 1 1 1 1 2 1 For accessories see from page 13

STEP 2

To order separately

... you can now choose the oil tank among different capacity and material including also accessories, if needed...

For accessories see from page 13

STEP 3

To order separately

... then you select the desired brackets or supports for high pressure hoses...

For accessories see from page 13

STEP 4

To order separately

PTO

... If required, you can also select the high pressure hoses according to different length.

For accessories see from pag. 13

A wide range of PTO’s is also available to match the different requirements of the most modern applications on trucks. (see page 10).

Your hydraulic kit is now ready for installation on the truck.

pag.3 O.M.F.B. S.p.a. Hydraulic Components


PREASSEMBLED HYDRAULIC KITS 089-700-10013 A B C D E F G H I L M N O

100-001-71030 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208

A B C D E F G H I L M N O

100-001-71094 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71110 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71101 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208

089-700-10022

Q.ty

N-FORCE CE version with auto PTO KNOCK-OFF Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 120 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts

089-700-20011

1 1 1 1 1 1 1 1 1 1 1 2 1


100-001-71030 100-016-00312 100-980-00057 105-033-11005 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71094 100-016-00312 100-980-00057 105-033-11005 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71110 100-016-00312 100-980-00057 105-033-11005 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71101 100-016-00312 100-980-00057 105-033-11005 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208

089-700-20020

Q.ty

N-FORCE BLOCK VERSION WITH MANUAL PTO KNOCK-OFF Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 120 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts

089-700-30019

1 1 1 1 1 1 1 1 1 1 1 2 1

089-700-40017

1 1 1 1 1 1 1 1 1 1 1 2 1

1 1 1 1 1 1 1 1 1 1 1 2 1

N-FORCE CE VERSION WITH UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 100 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts

089-700-40026

Q.ty

N-FORCE BLOCK VERSION WITH UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 120 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts

N-FORCE BLOCK VERSION WITH MANUAL PTO KNOCK-OFF Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 100 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts

089-700-30028

Q.ty

N-FORCE CE VERSION WITH UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 120 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts


N-FORCE BLOCK VERSION WITH UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 100 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts



Q.ty

1 1 1 1 1 1 1 1 1 1 1 2 1 Q.ty

1 1 1 1 1 1 1 1 1 1 1 2 1 Q.ty

1 1 1 1 1 1 1 1 1 1 1 2 1 Q.ty

1 1 1 1 1 1 1 1 1 1 1 2 1

PREASSEMBLED HYDRAULIC KITS 089-700-50015 A B C D E F G H I L M N O

100-001-71003 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71218 100-016-00312 100-980-00057 105-033-11201 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208

089-700-50024

Q.ty


089-700-60013

1 1 1 1 1 1 1 1 1 1 1 2 1


100-001-71003 100-016-00312 100-980-00057 105-033-11005 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208


100-001-71218 100-016-00312 100-980-00057 105-033-11005 116-006-00204 116-009-11137 121-008-00041 126-005-00080 155-100-00501 155-100-00592 155-111-00160 155-200-01009 155-993-50208

089-700-60022

Q.ty

N-FORCE low block version with UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 120 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts

1 1 1 1 1 1 1 1 1 1 1 2 1


N-FORCE low block version with UP/DOWN Air fitting Tee connection T.6x4 G 1/8 Roll of 20 mts air pipe PA-12 Black 6x4mm Gear pump LTMH 100 Nipple G 1 x G 1-1/4 Dowty washer 42,9x52,5x3.4 G 1-1/4 Tipping valve Modular 250 CE G 1 direct vlv LP ball valve LP fitting GOLD 90° G 1-1/4 for 50mm suction hose LP fitting GOLD 90° G 1-1/2 for 50mm suction hose LP fitting GOLD G 1-1/2 HP pressure fitting 90° G 1 Suction hose SAE 100R4 50x64mm L= 2mts



Q.ty

1 1 1 1 1 1 1 1 1 1 1 2 1

Q.ty

1 1 1 1 1 1 1 1 1 1 1 2 1

PREASSEMBLED HYDRAULIC KITS WHAT THE KIT INCLUDES:

** E

D

*

F

C

* **

*

A

I

B

* * G

N

N

* * O

*** H

M

*

L

ITEMS INCLUDED IN THE KIT



PARTS

MOUNTING EXAMPLE

DESCRIPTION

PAGE

TANK ASSEMBLY: oil tanks built with the latest technology to ensure the highest reliability e longer lifetime as well as an exterior aspect that can be perfectly integrated on the modern trucks. They are available in 4 different versions: painted with grey epoxy powder (RAL 7021); stainless steel; textured stainless steel and aluminum. They are supplied complete with support brackets, straps and rubber protections, filler and breather cap with replaceable air filter, oil level gauge and flange for filter options.

8

ACCESSORIES PTO-PUMP ASSEMBLY: a wide range of PTO’s is available for any European, American and Asian truck with different options to satisfy the multiple hydraulic applications ensuring the highest reliability and flexibility to our users. HYDRAULIC PUMPS Piston and gear pumps available with ISO, UNI and SAE flanges in different sizes and pressure rates to facilitate the selection of the most appropriate pump within the hydraulic kit.

10

ACCESSORIES AIR CONTROL The leading air proportional control in the industry thanks to its enhanced features, reliability and ergonomic design.

11

ACCESSORIES

TIPPING VALVE ASSEMBLY

11

MODULAR 150/250 and HT250 High Flow Pneumatically operated tipping valve with open centre hydraulic scheme to comply with EC directive. It is suitable for heavy-duty and off-road tipper bodies and semitrailers; if used in combination with our N-FORCE air control can ensure an enhanced proportional control of lowering speed of tipper bodies. ACCESSORIES ACCESSORIES Deep and wide range of accessories to grant the highest flexibility and personalization while setting up the hydraulic kit. HOSES Suction and high pressure hoses according to SAE standards . LP VALVES Low pressure ball and gate valves for hydraulic oil tanks. FITTINGS Wide and deep range of pneumatic, LP & HP hydraulic fittings to ensure reliability and flexibility. SWIVEL JOINTS High Pressure swivel joints G ¾ and G 1 for hydraulic kits on tractor trucks. PRESSURE COUPLING Ball and Screw quick couplings for high pressure systems G 3/4 and G 1.



13

OIL TANKS Imagine

Code

Description

Notes

135-600-11005

SIDE MOUNTING OIL TANK STEEL LT100 64x50x40

135-600-11201

SIDE MOUNTING OIL TANK STEEL LT120 64x50x45

135-610-11352

SIDE MOUNTING OIL TANK STEEL SL LT135 71x64x35

135-610-11503


135-610-11709


135-610-12002


135-610-02504


135-601-11353

SIDE MOUNTING OIL TANK STAINLESS STEEL LT135 71x64x35

135-601-11503


135-601-11700


135-601-12003


135-602-11352

SIDE MOUNTING OIL TANK TEXTURED STAINLESS STEEL LT135 71x64x35

135-602-11503


135-602-11709


135-602-12002


135-623-01359

SIDE MOUNTING OIL TANK ALUMINUM SM LT135 72x61x35

135-623-01500


135-623-01706


135-623-02009


ACCESSORIES GROUP 1 (see page 8)

ACCESSORIES GROUP 2 (see page. 9)



VALVE

100 L 120 L 135 L 150 L 170 L 200 L

FM / FP 80 Modular 150 AL Modular 150AL Modular 250 118-001-12176

FILTER

TANK CAPACITY

ACCESSORIES GROUP 1

FLANGE

VALVE MOUNTING PLATE

RETURN FILTER AND MOUNTING PLATE FOR TIPPING VALVE 121-994-00182 121-994-00226

25 μm Submerged filters

118-001-11177

60 μm

RETURN FILTER ONLY WITHOUT TIPPING VALVE OPTION Steel 90 μm

FLANGE

Steel 60 μm Reinforced cellulose 25 μm Reinforced cellulose 10 μm Micro-fibre glass 25 μm Steel 90 μm

Flangible filter

Steel 60 μm Reinforced cellulose 25 μm Reinforced cellulose 10 μm Micro-fibre glass 25 μm Steel 60 μm Reinforced cellulose 25 μm Steel 60 μm (Larger oil passage)



90 L 85 L 75 L 55 L 55 L 105 L 100 L 100 L 75 L 75 L 170 L 175 L 200 L

118-001-00358 118-001-01357 118-001-02356 118-001-03355 118-001-04354 118-001-00401 118-001-01400 118-001-02409 118-001-03408 118-001-04407 118-001-01455 118-001-02454 118-001-01473

250 L

Modular 150 AL Modular 250 Modular 150 AL Modular 250

FILTER

121-994-00182


FLANGE

135 L 150 L 170 L 200 L

VALVE

FLANGE

250 L

FM / FP 80 Modular 150 AL

FLANGE

135 L 150 L 170 L 200 L

FLANGE

TANK CAPACITY

ACCESSORIES GROUP 2

RETURN FILTER AND MOUNTING PLATE FOR TIPPING VALVE

118-001-12176

25 μm

118-001-11177

60 μm

118-001-12756

30 μm

118-001-11757

60 μm

121-994-00226

121-994-00217

Submerged filters

RETURN FILTER ONLY WITHOUT TIPPING VALVE OPTION FLANGE

Flangible filter

Tank 135 L 150 L 170 L 200 L

Tank 250 L

Steel 60 μm (Larger oil passage)

90 L 85 L 75 L 55 L 55 L 105 L 100 L 100 L 75 L 75 L 170 L 175 L 200 L

118-001-00358 118-001-01357 118-001-02356 118-001-03355 118-001-04354 118-001-00401 118-001-01400 118-001-02409 118-001-03408 118-001-04407 118-001-01455 118-001-02454 118-001-01473

Steel 90 μm

270 L

118-001-00509

Steel 60 μm

260 L

118-001-01508

Reinforced cellulose 30 μm

270 L

118-001-02507

Reinforced cellulose 25 μm

220 L

118-001-03506

Micro-fibre glass 10 μm

220 L

118-001-04505

Steel 90 μm Steel 60 μm Reinforced cellulose 25 μm Reinforced cellulose 10 μm Micro-fibre glass 25 μm Steel 90 μm Steel 60 μm Reinforced cellulose 25 μm Reinforced cellulose 10 μm Micro-fibre glass 25 μm Steel 60 μm Reinforced cellulose 25 μm

Modular 150AL Modular 250


VALVE

FLANGE 135 L 150 L 175 L 200 L

FILTER

TANK CAPACITY

ACCESSORIES GROUP 3

RETURN FILTER AND MOUNTING PLATE FOR TIPPING VALVE

118-001-12176

25 μm

118-001-11177

60 μm

121-994-00226

Submerged filters

RETURN FILTER ONLY WITHOUT TIPPING VALVE OPTION FLANGE

Flangible filter

Steel 90 μm Steel 60 μm Reinforced cellulose 25 μm Reinforced cellulose 10 μm Micro-fibre glass 25 μm Steel 90 μm Steel 60 μm Reinforced cellulose 25 μm Reinforced cellulose 10 μm Micro-fibre glass 25 μm Steel 60 μm Reinforced cellulose 25 μm Steel 60 μm (Larger oil passage)



90 L 85 L 75 L 55 L 55 L 105 L 100 L 100 L 75 L 75 L 170 L 175 L 200 L

118-001-00358 118-001-01357 118-001-02356 118-001-03355 118-001-04354 118-001-00401 118-001-01400 118-001-02409 118-001-03408 118-001-04407 118-001-01455 118-001-02454 118-001-01473

HYDRAULIC PUMPS IMAGINE

CODE

DESCRIPTION

NOTES Already included in the following preassembled hydraulic kits

105-033-11005

GEAR PUMP LTMH 100cc ISO BI-ROT.

089-700-10022 089-700-20020 089-700-30028 089-700-40026 089-700-50024 089-700-60022 Already included in the following preassembled hydraulic kits

GEAR PUMP LTMH 120cc ISO BI-ROT.

108-016-00807

BENT AXIS PISTON PUMPS MDS 80 RH

108-016-00816

BENT AXIS PISTON PUMPS MDS 80 LH

108-015-06035

BENT AXIS PISTON PUMPS HDS 64 RH

108-015-06044

BENT AXIS PISTON PUMPS HDS 64 LH

108-016-01306

BENT AXIS PISTON PUMPS MDS 130 RH

108-016-01315

BENT AXIS PISTON PUMPS MDS 130 LH

108-013-08400

BENT AXIS PISTON PUMPS HDT 84 RH

108-013-08419

BENT AXIS PISTON PUMPS HDT 84 LH

108-013-09605


108-013-09614


108-013-10808


108-013-10817


089-700-10013 089-700-20011 089-700-30019 089-700-40017 089-700-50015 089-700-60013

ON DEMAND

105-033-11201

MOUNTING EXAMPLE

PTO

A wide range of PTO’s is available for any European, American and Asian truck with different options to satisfy the multiple hydraulic applications. For more information please visit our web site www.omfb.it or contact our sales department.



AIR CONTROLS IMAGINE

CODE

DESCRIPTION

NOTES Already included in the following preassembled hydraulic kits: 089-700-50015 089-700-50024 Already included in the following preassembled hydraulic kits: 089-700-20011 089-700-20020

100-001-71003

N-FORCE CE VERSION WITH AUTO PTO KNOCK-OFF

100-001-71094

N-FORCE BLOCK VERSION WITH MANUAL PTO KNOCK-OFF

100-001-71209

N-FORCE LOW BLOCK VERSION WITH AUTO PTO KNOCK-OFF

ON DEMAND

100-001-71030

N-FORCE CE VERSION WITH AUTO PTO KNOCK-OFF

Already included in the following preassembled hydraulic kits: 089-700-10013 089-700-10022

100-001-71067

N-FORCE BLOCK VERSION WITH AUTO PTO KNOCK-OFF

ON DEMAND

100-001-71127

N-FORCE LOW BLOCK VERSION WITH MANUAL PTO KNOCK-OFF

ON DEMAND

100-001-71110

N-FORCE CE VERSION WITH UP/DOWN

100-001-71101

N-FORCE BLOCK VERSION WITH UP/DOWN

100-001-71218

N-FORCE LOW BLOCK VERSION WITH UP/DOWN

100-001-00462

N-GAGE 3 SINGLE LEVER AIR SWITCH WITH LAMP

Already included in the following preassembled hydraulic kits: 089-700-30019 089-700-30028 Already included in the following preassembled hydraulic kits: 089-700-40017 089-700-40026 Already included in the following preassembled hydraulic kits: 089-700-60013 089-700-60022

ON DEMAND

TIPPING VALVES IMAGINE

CODE

DESCRIPTION

NOTES Already included in the following preassembled hydraulic kits:

121-008-00041

MODULAR 250 CE G 1

DIRECT VALVE

121-007-00202

MODULAR 250 CE G 1 DOUBLE PRESSURE MECH.

ON DEMAND

121-007-00319

MODULAR 250 CE G 1 DOUBLE INDEPENDENT PRESSURE

ON DEMAND

089-700-10013 / 089-700-20011 / 089-700-30019 / 089-700-40017 / 089-700-10022 / 089-700-20020 / 089-700-30028 / 089-700-40026 / 089-700-50015 / 089-700-50024 / 089-700-60013 / 089-700-60022

RELIEF VALVES ASSEMBLY IMAGINE

CODE

DESCRIPTION

NOTES

121-080-00016

RELIEF VALVE ASSEMBLY G 1 WITH PILOTED VALVE

TO ORDER SEPARATELY

121-080-00025

RELIEF VALVE ASSEMBLY G 1 WITH CARTRIDGE 150 VALVE

TO ORDER SEPARATELY

121-080-00034

RELIEF VALVE ASSEMBLY G 1 WITH PILOTED VALVE – DOUBLE INEDPENDENT PRESSURE

TO ORDER SEPARATELY

121-080-00043

RELIEF VALVE ASSEMBLY G 1 WITH PILOTED VALVE – TRIPLE PRESSURE PNEUMATIC SELECTION

TO ORDER SEPARATELY

121-080-00052

RELIEF VALVE ASSEMBLY G 1 WITH DIRECT VALVE

TO ORDER SEPARATELY

124-002-00032

ADJUSTABLE RELIEF VALVE G 3/4

TO ORDER SEPARATELY



ACCESSORIES ILLUSTRATED INDEX OF VARIOUS PRODUCT FAMILIES

C

F D

H

G

B

E

A A B C D

- TIPPING VALVE MOUNTING KIT C/W SWIVEL JOINTS

pag. 16

- TIPPING VALVE MOUNTING KIT

pag. 19

- BRACKET & SWIVEL JOINTS

pag. 22

- KIT FOR OIL TANK MOUNTING

pag. 25

E F G H

- ACCESSORIES FOR SUCTION LINE

pag. 26

- MOUNTING ACCESSORIES FOR AIR CONTROLS

pag. 27

- HIGH PRESSURE HOSES & ACCESSORIES

pag. 31

- QUICK COUPLINGS & ACCESSORIES

pag. 34



121-994-00815 121-994-00851

page 16

121-994-00619 121-994-00628 121-994-00726 121-994-00735 121-994-00762

122-015-00219

Bracket & swivel joints

122-015-10182 122-015-10191 122-015-10208 122-015-10217 122-015-20019 122-015-20028 122-015-30026 122-015-30035 122-016-00058 122-016-00101

135-901-00166 135-901-00175 135-901-00184 135-901-00193 135-901-00200

VOLVO FH O

X

X

X

X

X

X

X

X

X

X

O O O O O

O

O

O

O

O

O

O O O O O O O

O O O O O

O

O O O O O

O

O O O O O

O

O O O O O

O

O O O

O O

O

O

O

O O O

O O

O

O

O

O O O O


AXOR

X

ACTROS NEW

O

ACTROS OLD

X O X O O

O


• •

135-901-00219

O

• •

page 25

Kit for oil tank mounting

D

135-901-00157

KIT FOR OIL TANK MOUNTING ON LH SIDE - DAF XF/CF UNIVERSAL OIL TANK MOUNTING KIT FOR DAF XF/CF SPACERS MOUNTING KIT FOR SIDE TANKS 2 H8 SCREWS M14 SPACERS MOUNTING KIT FOR SIDE TANKS 4 H8 SCREWS M14 SPACERS MOUNTING KIT FOR SIDE TANKS 2 H8 SCREWS M16 SPACERS MOUNTING KIT FOR SIDE TANKS 4 H8 SCREWS M16 BENT SPACERS MOUNTING KIT FOR SIDE TANKS 4.5° SCREWS M14 BENT SPACERS MOUNTING KIT FOR SIDE TANKS 4.5° SCREWS M16 BENT SPACERS MOUNTING KIT FOR SIDE TANKS 2.5° SCREWS M14

X

•• ••

135-901-00013 135-901-00102

X

• •

122-015-10039

O

• •

page 22

122-015-10020

X

• •

C

122-015-10011

O

• •

122-015-10002

X O X O O

• •

122-015-00255

SWIVEL ARM FOR PIPES CONNECTION ON SEMITRAILERS SWIVEL ARM FOR PIPES CONNECTION ON SEMITRAILERS SUPPORT CROSSBOARD FOR REVOLVING JOINTS G 3/4 BRACKET KIT FOR SWIVEL JOINTS G 3/4 DAF SUPPORT CROSSBOARD FOR REVOLVING JOINTS G 1 BRACKET KIT FOR SWIVEL JOINTS G 1 DAF SUPPORT CROSSBOARD FOR REVOLVING JOINTS G 3/4 BRACKET KIT FOR SWIVEL JOINTS G 3/4 DAF SUPPORT CROSSBOARD FOR REVOLVING JOINTS G 1 BRACKET KIT FOR SWIVEL JOINTS G 1 DAF SWIVEL JOINT 90° G 3/4 SUPPORT SWIVEL JOINT 90° G 1 SUPPORT BRACKET DAF BRACKET ADDITIONAL POSITION 1 PIPE G 3/4 - OPTIONAL ADDITIONAL POSITION 1 PIPE G1 - OPTIONAL

O

•• ••

121-994-00771 121-994-00780

page 19

“L” SHAPED MOUNTING CLUTCH ASSEMBLY FOR MODULAR 250 TIPPING VALVE STRAIGHT MOUNTING CLUTCH ASSEMBLY FOR MODULAR 250 TIPPING VALVE RETURN PLATE KIT G 1 MODULAR 250 RETURN PLATE KIT G 1 MODULAR 250 DAF RETURN PLATE KIT G 1 MODULAR 250 DAF (2 series) STRAIGHT MOUNTING BRACKET FOR TIPPING VALVE “HT-250” BRACKET KIT FOR HT-250 DAF (1 series) BRACKET KIT FOR HT-250 DAF (2 series)

X

•• ••

B

Tipping valve mounting kit

121-994-00600

SCANIA R SOFTAIR

121-994-00806

SCANIA R STANDARD

121-994-00799

RENAULT PREMIUM

121-994-00753

X

MAN TGX-TGS

FIFTH WHEEL MOUNTING KIT FOR TIPPING VALVE “HT250” WITH 2 SWIVEL JOINTS G1 FIFTH WHEEL MOUNTING KIT FOR TIPPING VALVE “HT250” WITH 1 SWIVEL JOINT G1 MOUNTING KIT FOR MODULAR 250 TIPPING VALVE ONTO FIFTH WHEEL WITH 2 SWIVEL JOINTS G1 MOUNTING KIT FOR MODULAR 250 TIPPING VALVE ONTO FIFTH WHEEL WITH 1 SWIVEL JOINT G1 MOUNTING KIT ON FIFTH WHEEL FOR G1 RETURN PLATE + 2 SWIVEL JOINTS G1 RETURN PLATE G 1 FOR FIFTH WHEEL

IVECO STRALIS

121-994-00744

DAF CF

Description

• •

Code

DAF XF

A

Tipping valve mounting kit c/w swivel joints

Area

Type

CROSS REFERENCE KITS / TRUCKS

* O

VOLVO FH

O

O

O

O

O O O O

O

O

O

O

O

O

TV series QUICK RELEASE COUPLING G 3/4 TV series QUICK RELEASE COUPLING G 1 N series STANDARDISED QUICK RELEASE COUPLING G 3/4 IN series STANDARDISED QUICK RELEASE COUPLING G 1 WINGS series QUICK RELEASE COUPLING G 3/4 COMPLETE WINGS series QUICK RELEASE COUPLING G 1 COMPLETE QUICK RELEASE COUPLING BRACKET KIT G 1 QUICK RELEASE COUPLING BRACKET KIT G 1 BY-PASS FOR QUICK RELEASING COUPLING G 1 DUST CAPS

*

AXOR

O

ACTROS NEW

SCANIA R SOFTAIR

Mounting accessories for air controls High pressure hoses & accessories Quick couplings & accessories

O

O

O

•

page 34

SCANIA R STANDARD

119-004-00040 119-004-00059 119-014-00048 119-014-00057 119-016-00091 119-016-00108 121-994-00708 121-994-00717 121-994-00842 119-003-.....

O

• •

H

O O O O

•

page 31

O

•

G

O

••

page 27

RENAULT PREMIUM

KIT PVC 30 x 35 PROTECTING SPIRAL FOR G 1 HOSE 90° HIGH PRESSURE FITTINGS G 3/4 90° HIGH PRESSURE FITTINGS G 1 90° HIGH PRESSURE FITTINGS G1 x G 3/4 90° HIGH PRESSURE FITTINGS G 3/4 x G1 45° HIGH PRESSURE FITTINGS G 3/4 45° HIGH PRESSURE FITTINGS G 1 45° HIGH PRESSURE FITTINGS G 3/4 x G1 NIPPLES G1 x G1-1/4 PLUG G 1-1/4 WASHER 42,9x52,5x3,4 G 1-1/4

100-002-70234

ACTROS OLD

156-020-00015 155-200-00340 155-200-01009 155-200-10348 155-200-34100 155-201-00349 155-201-01008 155-201-34107 116-006-00204 540-002-00165 116-009-11137

100-002-70038 100-002-70047 100-002-70065 100-002-70056 100-002-70181 100-002-70172 100-002-70243 100-002-70252 100-002-70261 100-002-70225

O

•

F

G 1-1/2 SUCTION KIT FOR 50mm HOSES ON SIDE MOUNTED OIL TANKS SPEZZONE TUBO SAE100 R4 50 x 64 L=2 MT L=300 BRACKET PIPE KIT L=300+400 BRACKET PIPE KIT HOSE BRACKET Ø 32mm HOSE BRACKET Ø 40mm 90° “GOLD” SUCTION FITTINGS G 1 x T.50 (60-63) 90° “GOLD” SUCTION FITTINGS G 1-1/4 x T.50 (60-63) 90° “GOLD” SUCTION FITTINGS G 1-1/2 x T.50 (60-63)

100-980-00057 100-980-00502

100-002-70029

O

Description

BRACKET KIT FOR SANDWICH AIR SWITCH FOR DAF XF 105 CABIN BRACKET KIT FOR N-FORCE/KIP-AIR CONTROL H=80 + G 1/8 PIPE 6 FITTING BRACKET H=50 BRACKET H=80 BRACKET FIXING N-FORCE KIT TO CABIN HANDLE D.25 FIXING N-FORCE KIT TO CABIN HANDLE D.22 BRACKET KIT FOR N-FORCE - DAF XF SEAT BRACKET KIT FOR N-FORCE - DAF XF SEAT (2012) BRACKET KIT FOR N-FORCE - VOLVO FH BRACKET KIT FOR N-FORCE - SCANIA R BRACKET KIT FOR N-FORCE / KIP-AIR FOR DAF CF 85 BRACKET KIT FOR N-FORCE/KIP-AIR CONTROL FOR MAN TGX-TGS CABINS PACKAGE MT.20 "PA-12" 6x4 BLACK PACKAGE MT.8 x 4 PIPES 4 COLORS D.6

100-002-40016

MAN TGX-TGS

page 26

155-993-50208 135-901-00255 135-901-00273 135-901-00308 135-901-00317 155-100-00412 155-100-00501 155-100-00592

IVECO STRALIS

E

Accessories for suction line

155-990-00283

DAF CF

Code

DAF XF

Type

Area

O O

O O

O O

O O

O O O O O O O O

only for new bracket driver’s seat of DAF XF truck (production after 06/2012 approx.).

Suitable for

.

KEY SIMBOLS Especially designed X Use not possible

Empty space = generic use



O O

O O

O O

A AREA

TIPPING VALVE MOUNTING KIT C/W SWIVEL JOINTS

FIFTH WHEEL MOUNTING KIT FOR TIPPING VALVE “HT-250” WITH 2 SWIVEL JOINTS G1 Mounting kit specifically DESIGNED to mount the HT-250 valve in front of FIFTH WHEEL of truck tractors to MAKE 2-HOSES HYDRAULIC KIT ON SEMITRAILERS. Support brackets are MADE in galvanised steel and allow a quick valve mounting with different positions available. The kit includes the mounting nuts and bolts and two revolving joints G1 COMPLETE WITH their extension pipes to swivel the semitrailer hoses. .

Mounting example

Code: 121-994-00744 FIFTH WHEEL MOUNTING KIT FOR TIPPING VALVE “HT-250” WITH 1 SWIVEL JOINT G1 Mounting kit specifically DESIGNED to mount the HT-250 valve in front of FIFTH WHEEL of truck tractors to MAKE 1-HOSE HYDRAULIC KIT ON SEMITRAILERS. Support brackets are MADE in galvanised steel and allow a quick valve mounting with different positions available. The kit includes the mounting nuts and bolts and two revolving joints G1 COMPLETE WITH their extension pipes to swivel the semitrailer hose.

Mounting example

Code: 121-994-00753



A AREA


MOUNTING KIT FOR MODULAR 250 TIPPING VALVE ONTO FIFTH WHEEL WITH 2 SWIVEL JOINTS G1 This assembly has been specially developed for tractor trucks with 2-hose hydraulic system with MODULAR 250 tipping valve fitted in front of fifth wheel anchored to the mounting foot of the same. The assembly is composed of an extra-return plate and to mounting brackets the allow to change the mounting height with regards to the fifth wheel surface according to the requirements. The kit is completed with 2 swivel joints G1 and related 450mm extensions to facilitate the hose rotation while the truck is on the move without any interference with the chassis.

125

160

Raised mounting

Mounting example Standard mounting

Code: 121-994-00799 MOUNTING KIT FOR MODULAR 250 TIPPING VALVE ONTO FIFTH WHEEL WITH 1 SWIVEL JOINT G1 This assembly has been specially developed for tractor trucks with 1-hose hydraulic system with MODULAR 250 tipping valve fitted in front of fifth wheel anchored to the mounting foot of the same. The assembly is composed of mounting brackets the allow to change the mounting height with regards to the fifth wheel surface according to the requirements. The kit is completed with 1 swivel joint G1 and related 450mm extensions to facilitate the hose rotation while the truck is on the move without any interference with the chassis.

90

135

Raised mounting

Mounting example

Standard mounting

Code: 121-994-00806



A AREA


FIFTH WHEEL MOUNTING KIT FOR RETUN PLATE G 1 WITH 2 SWIVEL JOINTS G 1 Mounting kit specifically DESIGNED to mount the return plate with relief valve 121-080- serie, in front of FIFTH WHEEL of truck tractors to MAKE 2-HOSES HYDRAULIC KIT ON SEMITRAILERS. Support brackets are MADE in galvanised steel and allow a quick valve mounting with different positions available. The kit includes the mounting nuts and bolts and two revolving joints COMPLETE WITH their extension pipes to swivel the semitrailer hoses.

Mounting example

Code: 121-994-00815 RETURN PLATE G 1 FOR FIFTH WHEEL

Code: 121-994-00851



B AREA

TIPPING VALVE MOUNTING KIT

“L” SHAPED MOUNTING BRACKET ASSEMBLY FOR MODULAR 250 TIPPING VALVE

Code: 121-994-00600

Mounting example

STRAIGHT MOUNTING BRACKET ASSEMBLY FOR MODULAR 250 TIPPING VALVE

Code: 121-994-00619

Mounting example

EXTRA RETUN PLATE FOR MODULAR 250

Code: 121-994-00628

Mounting example

STRAIGHT MOUNTING BRACKET FOR TIPPING VALVE “HT-250” Mounting kit realized to fix the HT-250 valve on truck tractors chassis. The layout is studied to allow an easy matching with original chassis drilling on European vehicles and to grant several valve mounting positions.The kit includes a 8mm galvanized steel bracket and mounting nuts and bolts

Mounting example

Code: 121-994-00762



B AREA


KIT RETURN PLATE G 1 MODULAR 250 DAF XF-CF The kit is composed of a shaped bracket to fit the Modular tipping valve and an aluminium plate to make the return piping easier. The bracket allows to mount the modular in various positions.

Mounting example

Code: 121-994-00726 KIT RETURN PLATE G 1 MODULAR 250 DAF XF-CF he kit is composed of a shaped bracket to fit the Modular tipping valve and an aluminium plate to make the return piping easier. The bracket allows to mount the modular in various positions.

Code: 121-994-00735

Mounting example



B AREA


BRACKET KIT FOR HT-250

Code: 121-994-00771

Mounting example

BRACKET KIT FOR HT-250

Mounting example

Code: 121-994-00780



C AREA

BRACKETS & SWIVEL JOINTS

SWIVEL ARM FOR PIPES CONNECTION ON SEMITRAILERS Swivel arm to be applied on the rear side of the Tractor Unit. It allows the hoses to follow the semitrailer’s movements, without the necessity of using additional fittings. Painted with black epoxy dust, it has a complete steel structure and it comes complete with greaser for helping the maintenance operations.

Code: 122-015-00219

Mounting example

SWIVEL ARM FOR PIPES CONNECTION ON SEMITRAILERS Swivel arm to be applied on the rear side of the Tractor Unit. It allows the hoses to follow the semitrailer’s movements, without the necessity of using additional fittings. Painted with grey RAL 7021 epoxy dust, it has a complete steel structure and it comes complete with greaser for helping the maintenance operations..

Mounting example

Code: 122-015-00255 BRACKET KIT FOR SWIVEL JOINTS G 1 - G 3/4 Easy to install on the rear of tractor trucks for semitrailer to facilitate the movements of hysdraulic pipes. It is supplied with 2 swivel joints of G 1 or G 3/4, extension steel pipes, brackets and bolts. Swivel joints can be placed in 3 different positions and it is also possible to add and extra one into central position. The main bracket is powder painted with colour RAL 7021 and accessories are cold zinc treated.

Bracket kit G1 Bracket kit G3/4

code 122-015-10039 code 122-015-10011

Mounting example



C AREA


BRACKET KIT FOR SWIVEL JOINTS G 1 - G 3/4 Easy to install on the rear of tractor trucks for semitrailer to facilitate the movements of hysdraulic pipes. It is supplied with 1 swivel joint of G 1 or G 3/4, extension steel pipes, brackets and bolts. Swivel joints can be placed in 3 different positions and it is also possible to add and extra one into central position. The main bracket and accessories are cold zinc treated.

Bracket kit G 1 Bracket kit G 3/4

code 122-015-10217 code 122-015-10191

Mounting example

Bracket code 122-015-30035

Additional position 1 pipe OPTIONAL code 122-016-00101 (G 1) code 122-016-00058 (G 3/4) SUPPORT CROSSBOARD FOR REVOLVING JOINTS G 1 - G 3/4 It is mounted on the rear of truck tractors to facilitate the operation of oleodynamic pipes. It is provided with 2 revolving joints of G 1 or G 3/4, steel extensions pipes, plates, nuts and bolts for mounting. The joints can be positioned on 5 different mounting positions and other ones can be ordered separately and added. All components are made of cold-galvanized steel.

Support crossboard G 1 Support crossboard G 3/4

code 122-015-10020 code 122-015-10002

Mounting example



C AREA


SUPPORT CROSSBOARD FOR REVOLVING JOINTS G 1 - G 3/4 It is mounted on the rear of truck tractors to facilitate the operation of oleodynamic pipes. It is provided with 1 revolving joint of G 1 or G 3/4, steel extensions pipes, plates, nuts and bolts for mounting. The joints can be positioned on 5 different mounting positions and other ones can be ordered separately and added. All components are made of cold-galvanized steel.

Support crossboard G 1 Support crossboard G 3/4

code 122-015-10208 code 122-015-10182

Mounting example

BRACKET

Code: 122-015-30026 SWIVEL JOINT 90° G 1 AND G 3/4 SUPPORT

Code: 122-015-20019 G 3/4 Code: 122-015-20028 G 1

Mounting example



D AREA

KIT FOR OIL TANK MOUNTING

KIT FOR OIL TANK MOUNTING ON LH SIDE - DAF XF/CF Brackets and spacer kits especially designed to facilitate the mounting of side oil tanks on DAF XF/CF trucks, close to the LH rear wheel of the truck.

Code: 135-901-00013

Mounting example

UNIVERSAL OIL TANK MOUNTING KIT FOR DAF XF/CF Brackets and spacer kits especially designed to facilitate the mounting of side oil tanks on DAF trucks.

Code: 135-901-00102

Mounting example

SPACERS MOUNTING KIT FOR SIDE TANKS Spacer kits created to make side tanks mounting on truck tractors easier, they have a universal drilling suitable for hole pattern on all European vehicles. The flat version is 8mm high and is useful to compensate the thickness of fixing angles on thrust ring. The bent version is useful to bring into alignment the support brackets on tank when they are mounted on the front part of chassis. The version with 2,5° angle is specifically created for Scania vehicles while the version with 4,5° is suitable for all other brands. They are made of galvanized steel and supplied complete with special high resistance screws.

Mounting example

135-901-00157 135-901-00166 135-901-00175 135-901-00184 135-901-00193 135-901-00200 135-901-00219

2 SPACERS H=8 SCREWS M14 4 SPACERS H=8 SCREWS M14 2 SPACERS H=8 SCREWS M16 4 SPACERS H=8 SCREWS M16 SPACER BENT 4.5° SCREWS M14 SPACER BENT 4.5° SCREWS M16 SPACER BENT 2.5° SCREWS M14



E

AREA

ACCESSORIES SUCTION LINE

G 1-1/2 SUCTION KIT FOR 50mm HOSES ON SIDE MOUNTED OIL TANKS Suction kit c/w ball valve suitable for side mounting tanks with G 1-1/2 port. It includes a swivel nipple with double O-ring sealing, which allows an easy and leakage-free orientation of the ball valve and a GOLD adjustable 90° fitting for 50mm ID suction hose.

Code: 155-990-00283

Mounting example

L=300 BRACKET PIPE KIT

L=300+400 BRACKET PIPE KIT

The kit includes a pre-drilled zinc steel plate to shape it according to your needs, a PVC gasket to protect the hose and a fixing collar. It is especially designed to support the suction hose and to avoid interference with any moving aggregates or parts that might damage it. .

The kit includes a pre-drilled zinc steel plate to shape it according to your needs plus an extra longer bracket, a PVC gasket to protect the hose and a fixing collar. It is especially designed to support the suction hose and to avoid interference with any moving aggregates or parts that might damage it.

Mounting example

Code: 135-901-00255

Mounting example

Code: 135-901-00273

HOSE BRACKET Bracket made of zinc coated steel with rubber protection for the hose. Very easy to use and to fix through one screw only. Working temperature: -20° C / +120° C.

Screw M8 Code:

90° “GOLD” SUCTION FITTINGS

135-901-00308 (HOSE Ø32) 135-901-00317 (HOSE Ø40)

HOSE SAE 100 R4

Solid brass made 90° suction fittings, particularly suitable for pumps, oil tanks and gate valves mounting and easy to orientate thanks to a steel tightening nut. Saw-tooth machining and pump-clamping bands are used to prevent accidental separation on the pipe end, while an O-ring ensure a perfect seal on the pump end. Two sizes of clamps are available for each fitting in order to adapt to every kind of pipe.

Oil resistant synthetic rubber tube; reinforcement with high tensile textile cords and embedded steel helix wires; abrasion, ozone and hydrocarbon resistant synthetic rubber cover; working temperature -40°+120°.

L=2MT.

Code 155-100-00412 GOLD 90° - G1 x T.50 (60-63) Code 155-100-00501 GOLD 90° - G1-1/4 x T.50 (60-63) Code 155-100-00592 GOLD 90° - G1-1/2 x T.50 (60-63)

Code: 155-993-50208 pag.26

O.M.F.B. S.p.a. Hydraulic Components


F

AREA

MOUNTING ACCESSORIES FOR AIR CONTROLS

BRACKET KIT FOR SANDWICH AIR SWITCH FOR DAF XF 105 CABIN Kit especially designed for fixing air controls series sandwich to bracket for driver’s seat of DAX XF105 cabin.

Code: 100-002-40016 BRACKET H=50mm

BRACKET KIT FOR N-FORCE/KIP-AIR CONTROL H=80 + G 1/8 PIPE 6 FITTINGS

Code: 100-002-70038

Code: 100-002-70029

BRACKET VERTICALE H=80mm

Code: 100-002-70047



F

AREA


BRACKET Bracket external mounting (OPTIONAL). With this kit you can also fit a pneumatic switch OPTIONAL) to control other auxiliary applications.

Code: 100-002-70065

Mounting example

FIXING N-FORCE KIT TO CABIN HANDLE

Code: 100-002-70056 (Ø 25mm) Code: 100-002-70181 (Ø 22mm) BRACKET KIT FOR N-FORCE FOR DAF XF SEAT Kit especially designed to mount air controls type N-FORCE on driver’s seat of DAF XF.

Mounting example

Code: 100-002-70172 pag.28 O.M.F.B. S.p.a. Hydraulic Components


F

AREA


BRACKET KIT FOR N-FORCE / KIP-AIR FOR DAF CF 85 Kit especially designed to mount air controls type -FORCE/KIP-AIR on driver’s seat of DAF CF 85.

Code: 100-002-70225

Mounting example

BRACKET KIT FOR N-FORCE/KIP-AIR CONTROL FOR MAN TGX-TGS CABINS Kit especially designed for mounting the air controls series N_FORCE and KIP-AIR next to driver’s seat for MAX TGX and TGS trucks.

Mounting example



F

AREA


BRACKET KIT FOR N-FORCE - DAF XF SEAT (2012) Assembly kit especially designed to mount air controls series N-FORCE on the new bracket driver’s seat of DAF XF truck (production after 06/2012 approx.).

Code: 100-002-70243

Mounting example

BRACKET KIT FOR N-FORCE - VOLVO FH

BRACKET KIT FOR N-FORCE - SCANIA R

Assembly kit especially designed to mount air controls series NFORCE on the bracket driver’s seat of VOLVO FH.

Assembly kit especially designed to mount air controls series N-FORCE on the bracket driver’s seat of SCANIA R.

Code: 100-002-70252

Code: 100-002-70261

Package of 8mts each colour air pipe 6x4mm - it contains 4 different colours with sheath protection, particularly suitable for wet kits on tractor trucks.

Code: 100-980-00502

Mounting example

Pacakge of 20 mts PA-12 high resistant air pipe 6x4. It is particularly suitable for wet kits on tractor trucks



G AREA

HIGH PRESSURE HOSES & ACCESSORIES

KIT PVC 30 x 35 PROTECTING SPIRAL FOR G 1 HOSE 5mts-piece of high resistant and fire-extinguisher PVC spiral to protect G 1 hose against wear. It is recommended as useful accessory for wet kits on tractor trucks.

Mounting example

Code: 156-020-00015 90° HIGH PRESSURE FITTINGS

Galvanized steel made 90° high pressure fittings, suitable for connecting and orientating the pressure hose on evry type of pump or tipping valve. The sealing is guaranteed by a dowty washer.

F

F x F1 ISO 228

F

G 1/2 X G 1/2 G 3/4 X G 3/4

F1 F1

G1XG1 G 3/4 X G 1 G 1 X G 3/4

CODE

155-200-00126 155-200-00340 155-200-01009 155-200-34100 155-200-10348

45° HIGH PRESSURE FITTINGS Galvanized steel made 45° high pressure fittings, suitable for connecting and orientating the pressure hose on Bent-Axis piston pumps. The sealing is guaranteed by a dowty washer

F1

F x F1 ISO 228

F

G 3/4 X G 3/4 G 3/4 X G 1 G1XG1



CODE

155-201-00349 155-201-34107 155-201-01008

G AREA


NIPPLES

Code: 116-006-00204 G 1x1-1/4

WASHER STEEL+RUBBER

Code: 116-009-11137 G 1x1-1/4

PLUG

Code: 540-002-00165 G 1x1/4



CODE

DESCRIPTION

156-990-04107

HOSE 25x39 T4 F/F G 1 CM 70 280 bar

156-99004116


156-990-04125


156-990-04134


156-990-04143


156-990-04152


156-990-04161

HOSE 25x39 T4 F/F G 1 CM 100 280 bar

156-990-04170

HOSE 25x39 T4 F/F G 1 CM 105 280 bar

156-990-04189

HOSE 25x39 T4 F/F G 1 CM 110 280 bar

156-990-04198

HOSE 25x39 T4 F/F G 1 CM 115 280 bar

156-990-04205

HOSE 25x39 T4 F/F G 1 CM 120 280 bar

156-990-04214

HOSE 25x39 T4 F/F G 1 CM 125 280 bar

156-990-04223

HOSE 25x39 T4 F/F G 1 CM 130 280 bar

156-990-04232

HOSE 25x39 T4 F/F G 1 CM 135 280 bar

156-990-04241

HOSE 25x39 T4 F/F G 1 CM 140 280 bar

156-990-04250

HOSE 25x39 T4 F/F G 1 CM 145 280 bar

156-990-04269

HOSE 25x39 T4 F/F G 1 CM 150 280 bar

156-990-04278

HOSE 25x39 T4 F/F G 1 CM 155 280 bar

156-990-04287

HOSE 25x39 T4 F/F G 1 CM 160 280 bar

156-990-04296

HOSE 25x39 T4 F/F G 1 CM 165 280 bar

156-990-04303

HOSE 25x39 T4 F/F G 1 CM 170 280 bar

156-990-04367

HOSE 25x39 T4 F/F G 1 CM 200 280 bar

156-990-04465

HOSE 25x39 T4 F/F G 1 CM 250 280 bar

156-990-04765

HOSE 25x39 T4 F/F G 1 CM 400 280 bar

156-990-01020


156-990-01025


156-990-01039


156-990-01043


156-990-01048


156-990-01049


156-990-01050

HOSE 25x39 T2 F/F G 1 CM 100 165 bar

156-990-01051

HOSE 25x39 T2 F/F G 1 CM 105 165 bar

156-990-01053

HOSE 25x39 T2 F/F G 1 CM 110 165 bar

156-990-01055

HOSE 25x39 T2 F/F G 1 CM 115 165 bar

156-990-01057

HOSE 25x39 T2 F/F G 1 CM 120 165 bar

156-990-01066

HOSE 25x39 T2 F/F G 1 CM 125 165 bar

156-990-01075

HOSE 25x39 T2 F/F G 1 CM 130 165 bar

156-990-01084

HOSE 25x39 T2 F/F G 1 CM 135 165 bar

156-990-01093

HOSE 25x39 T2 F/F G 1 CM 140 165 bar

156-990-01100

HOSE 25x39 T2 F/F G 1 CM 145 165 bar

156-990-00601

HOSE 25x39 T2 F/F G 1 CM 150 165 bar

156-990-00602

HOSE 25x39 T2 F/F G 1 CM 155 165 bar

156-990-00603

HOSE 25x39 T2 F/F G 1 CM 160 165 bar

156-990-00604

HOSE 25x39 T2 F/F G 1 CM 165 165 bar

156-99000605

HOSE 25x39 T2 F/F G 1 CM 170 165 bar

156-990-00610

HOSE 25x39 T2 F/F G 1 CM 200 165 bar

156-990-00834

HOSE 25x39 T2 F/F G 1 CM 250 165 bar

156-990-00843

HOSE 25x39 T2 F/F G 1 CM 300 165 bar

156-990-00825

HOSE 25x39 T2 F/F G 1 CM 400 165 bar

156-990-00969

HOSE 25x39 T2 F/F G 1 CM 550 165 bar



NOTE

4 LAYERS

IMAGINE


2 LAYERS

G AREA

H AREA

QUICK COUPLINGS & ACCESSORIES TV series QUICK RELEASE COUPLING COMPLETE

BALL TYPE

MALE

FEMALE

G 3/4

119-004-00040

119-005-00076

119-005-00085

G1

119-004-00059

119-005-00094

119-005-00101

N series STANDARDISED QUICK RELEASE COUPLING MALE

COMPLETE

FEMALE

BALL TYPE

G 3/4

119-014-00048

119-015-00074

119-015-00083

G1

119-014-00057

119-015-00092

119-015-00109

WINGS series QUICK RELEASE COUPLING COMPLETE

FIXED PIECE

LOOSE WINGS PIECE

G 3/4

119-016-00091

119-017-00072

119-017-00081

G1

119-016-00108

119-017-00090

119-017-00107

WINGS TYPE

DUST CAPS MALE

FEMALE

SCREW TYPE

For wings coupling suitable for For wings coupling suitable for LOOSE WINGS piece FIXED piece

MALE

FEMALE

G 3/4

119-003-00649

119-003-00658

G1

119-003-00685

119-003-00694

G 3/4

119-003-02076

119-003-02085

G1

119-003-02094

119-003-02101



Code: 121-994-00708

BRACKET KIT FOR QUICK RELEASE COUPLING SERIES N

USE WITH N SERIES COMPLETE

MALE

Code: 121-994-00717

BRACKET KIT FOR QUICK RELEASE COUPLING SERIES TV

USE WITH TV SERIES

FEMALE

COMPLETE

119-014-00057 119-015-00092 119-015-00109

BRACKET KIT FOR WINGS QUICK RELEASE COUPLING

BRACKET KIT FOR SINGLE QUICK RELEASE COUPLING G 1

Code: 121-994-00824

Code: 121-994-00833

MALE

FEMALE

119-004-00059 119-005-00094 119-005-00101

BY-PASS FOR QUICK RELEASING COUPLING G 1

Code: 121-994-00842



TROUBLESHOOTING GUIDE TROUBLE

No oil flow from pump

Pump will not build/hold pressure

POSSIBLE REASON

SOLUTION

No oil in reservoir.

Fill reservoir with appropriate fluid. See pump manufacturer’s specifications

Ball valve of oil tank closed

Open valve.

Suction hose closed

Verify suction hose

Pump is wrong rotation for application.

Replace or alter direction of rotation of pump to correct rotation.

Hoses are reversed.

Change inlet and pressure hose locations.

PTO not engaged.

Engage the PTO

Pump worn or damaged.

Repair or replace pump

Pump worn or damaged.

Repair or replace pump.

Relief valve of distributor valve set not correctly.

Adjust relief valve

Relief valve stuck open.

Remove, clean, and re-set the releif valve Check air connection is provided;

No oil flow from valve to service port

Make sure fixing bolts of the valve body are not too tight. Tighten bolts as per torque specifications. See valve manufacturer’s specifications

Spool is not moving

Check air pipes to detect any possible leakage. Replace air pipes. Spool stuck because of dirt or piece of welding.Clean the spool or replace the valve. Check the status of air control

Air control not activated

Check right connections of the air pipes at the valve

Air in system

Pump is noisy

See “Oil foaming.” Increase size of suctiuon hose; re-mount suction hose; Check for

Cavitation (Cavitation is caused by excessive vacuum at the pump inlet)

kinks or leakeages In the suction hose; Check for clogged reservoir or breather or strainer; Inlet hose should be SAE type 100R4 hose only.

Pump leaks at shaft oil-seal

Pump leaks at body section

At pump port

Pump is hot (Oil temperature should not exceed 60º/70° C)

Oil foaming

Dirt under seal.

Replace seal. Examine pump shaft if damaged.

Damaged seal or pump body.

Replace seal or body section.

Improperly fitted seal.

Replace seal.

Damaged o’ring or body.

Replace o’ring or body section.

Loose bolts.

Tighten bolts as per torque to specification.

Loose fitting.

Tighten fitting.

Damaged fitting.

Replace fitting.

Damaged pump body.

Replace body section.

Low oil level.

Fill oil tank.

Oil tank too small.

Increase oil tank size.

Dirty oil.

Replace oil and filter.

Relief valve stuck open.

Remove, clean, and re-set. Adjust relief valve to specifications

Relief valve improperly set.

Review application.

Pump too large for application.

Replace with correct size of pump

Undersized system component.

Review application.

Improper type of oil.

Replace with correct oil.

Low oil level.

Fill tank.

Loose inlet fitting.

Tighten fitting.

Damaged pump shaft oil-seal.

Replace seal.

Leak in suction hose.

Replace hose.



NOTES

pag.38

O.M.F.B. S.p.a. Hydraulic Components


NOTES




997-410-00058

Rev.: AE
