i Last updated 1/7/2016 Flight Mode Control System Settings Flight Se

2 downloads 66 Views 557KB Size Report
Jan 7, 2016 - Battery. Language. Date & time. About Flight Mode. Control. Bind ... *1 Clicking [Android Version] ver
P a g e  | i 

   

 

Flight Mode Control 

System Settings 

Flight Settings 

Battery 

Bind 

Language  Reset  Date & time  About Flight Mode  Control 

Set Date 

Camera Select 

Set Time 

Mode Select 

Select Time Zone 

Hardware Monitor 

Use 24‐Hour Format

Other Settings 

Set Date Format 

实用工具  Utility 

Model Number  Android Version*1 

工厂测试  Factory testing 

Kernel Version 

开发者选项 Developer options 

Build Number  Controller Test  Hardware Version  Radio Control Update

Model Select 

应用管理  Application management

System Update 

Root/UnRoot  AppSettings  WifiTest 

*1 Clicking [Android Version] very fast 5 to 10 times will bring up Utility.  © David Hoegen · Trinity 360º Photography 2014 Last updated 1/7/2016  

Unit of Measure 

P a g e  | ii 

1.

Main Screen [Flight Control]  a.

System Settings  i. Battery  1. View Information about Battery level  ii. Language  1. Select your language  iii. Reset  1. Reset/Restore all settings back to factory.   iv. Date & Time  1. Set Date, Time, Time Zone, 24‐Hour format, and Date Format   v. About Flight Mode Control [View information about the remote system]  1. Model number [The remote Model Number ‘ST10’  2. 3. 4. 5. 6.

7.

Android Version [The Android Version ‘4.0.3’] *1    Kernel Version [The Kernel Version ‘3.0.8’ ]  Build Number [Firmware version]  Hardware Version [The Hardware Version ‘P1.4’]  Radio Control Update [Used to update the radio receive/Transmit firmware]  a. Clicking this will bring you into the Radio Update Screen. This will show the files on the  SD card (if they exist) to select to update.  System Update [This is used to update the firmware for the Remote]  a. Clicking this will start the update (if there is an update on the SD card) 

b. Flight Settings  i. Bind [Bind a Quad Copter and/or camera to the Remote]  1. Clicking the button will bring up a screen showing devices the remote detected [*** NOTE: You  must have already selected a camera (See Camera Select) and Model (see Model Select) ***]  ii. Camera Select  1. Pressing this button allows you to select the camera you want to use with the remote. A list of  cameras will appear to select from.  iii. Mode Select  1. Pressing this button allows you to select orientation of the control sticks.  iv. Hardware Monitor [Great tool for testing all the switches, sticks, buttons, and rocker]  1. Clicking the button will bring up a screen displaying a picture of the remote. Pressing, moving,  switching, and moving items will show them moving on the screen.  v. Other Settings  1. Unit of measure. Metric [Meters] or Imperial [Feet].   c. Model Select  i. Clicking the button will bring up a screen to either select your Quad Model and/or create a new one.  1. Pressing on a model already setup (see next step )  2. Pressing on the New Model button will allow you to create a new model.  a.  Clicking on “Please input name” allows you to name the new model i.e. Q500+  b. Clicking on “Type” will give you a selection of quads that are in its database. I.e.  Typhoon+, Typhoon 4K, or Chroma. [ as of the date below ]  c. You are now back to the Edit Model Screen. Press save to return to Model Select  screen.      

*1 Clicking [Android Version] very fast 5 to 10 times will bring up Utility. © David Hoegen · Trinity 360º Photography 2014 Last updated 1/7/2016  

P a g e  | iii 

**********************************************************************************  ********* Warning Warning Warning: Continue at your own risk. You can brick your remote *********  **********************************************************************************    1.

*Utility [ to get here go to System Settings‐>About Flight Mode Control and tap Android Version very fast 5 to 10  times  a.

A window will show up. The title and some buttons are in Chinese Simplified. Translation can be found in flow  chart.  i. Factory testing  [Not getting into this. Continue at your own risk ]  ii. Developer options 

1. This is where you put the device into USB debugging mode.  This alows you to access  files on the system via a program ADB. (Android Debug Bridge). I use the Android SDK.  You can backup files and install files. : Continue at your own risk. :  2. Please note: every time you turn off and back on your remote, you must go back into the  menu and turn USB debugging on. If not you will not find the device via ADB.  iii. Controller Test  1. This will go though some test.   a. It will test the controller buttons and display the values.  b. It will check the radio transmitter and receiver by returning the firmware value.  c. GPS Test  [ Have not gone into this ]  d. Controller Test  [ Have not gone into this ]  e. Single Test  [ Have not gone into this ]  iv. Application management [Not getting into this. Continue at your own risk ]  v. RootUnRoot   1. This puts the android system into Root mode. Needed if using USB debugging.  vi. AppSettings [Not getting into this. Continue at your own risk ]  vii. WifiTest [Not getting into this. Continue at your own risk ]   

 

© David Hoegen · Trinity 360º Photography 2014 Last updated 1/7/2016  

P a g e  | iv 

System Settings   

Flight Settings 

 

Model Select 

 

Android Version [DEBUG] 

© David Hoegen · Trinity 360º Photography 2014 Last updated 1/7/2016  

P a g e  | v 

Special thanks for the Yuneec‐Forum.com Members  Proof readers and editors  George Strickroth SparkoRC G3ZGZ mrburns  

Supporters  Wingshooter  

“Kind words do not cost much. Yet they accomplish much.” Blaise Pascal   

© David Hoegen · Trinity 360º Photography 2014 Last updated 1/7/2016