ISO Update

ISO Update

Supplement to ISO Focus+ April 2013

People and places ISO Members Since the March 2013 issue the following changes affecting ISO members have occurred:

Correspondent members MAURITANIA (DNPQ)

New CEOs Member body AUSTRIA (ASI) Managing Director: Dr Elisabeth Stampfl-Blaha

Direction de la Normalisation et de la Promotion de la Qualité Ministère du Commerce, de l'Industrie, de l'Artisanat et du Tourisme BP : 3003 Nouakchott

COSTA RICA (INTECO) Executive Director: Mr Mauricio Céspedes MEXICO (DGN) Director General: Mr Alberto Ulises Esteban Marina PANAMA (COPANIT) General Director: Mr Ahmed Elias Morón SLOVAKIA (SUTN) General Director: Mr. Igor Hladik THAILAND (TISI) Secretary-General: Mr Suraphong Chiengtong

Correspondent members KYRGYZSTAN (KYRGYZST) Director: Mr Muhamat Kaparov

Address changes: Member bodies EGYPT (EOS) E-mail

[email protected]

ISO Update, Supplement to ISO Focus+– April 2013

International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

ISO/DTS 13399-3

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

ISO/DTS 13399-4

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

ISO/DTS 13399-5

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items

ISO/DTS 13399-50

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

ISO/DTS 13399-60

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems

ISO/CD 9138

Abrasive grains — Sampling and splitting

TC 34

Food products

ISO/CD 6495-1

Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method

Period from 01 March to 31 March 2013

ISO/CD 12966-1

These documents are currently under consideration in the technical committee.

Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 1: Guidelines on gas chromatography

CD registered

TC 38

Textiles

They have been registred at the Central Secretariat.

ISO/CD 13629-2

Determination of antifungal axctivity of textile products — Part 2: Plate count method

TC 4

Rolling bearings

ISO/CD 464

Rolling bearings — Radial bearings with locating snap ring — Dimensions and tolerances

ISO/CD 17299-5

Textiles — Determination of deodorant property — Part 5: Metal-oxide semiconductor sensors method

TC 20

Aircraft and space vehicles

ISO/CD 16457

Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere

ISO/CD 17540

Space systems — Liquid rocket engines and test stands — Terms and definitions

TC 39

Machine tools

ISO/CD 230-7

Test code for machine tools — Part 7: Geometric accuracy of axes of rotation

ISO/CD TR 16907

Machine tools — Numerical compensation of geometric errors

TC 42

Photography

ISO/CD 18938

Imaging materials — Optical discs — Care and handling for extended storage

TC 45

Rubber and rubber products

ISO/CD 4097

Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure

TC 22

Road vehicles

ISO/DTR 10982

Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags

TC 23

Tractors and machinery for agriculture and forestry

TC 46

Information and documentation

Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)

ISO/CD 5127

Information and documentation — Vocabulary

TC 58

Gas cylinders

ISO/CD 14456

Gas cylinders — Gas properties and associated classification (FTSC) codes

ISO/CD 16411

ISO/CD 9635-1

Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements

TC 59

Buildings and civil engineering works

ISO/CD 9635-2

Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves

ISO/DTS 12720

ISO/CD 9635-3

Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves

Sustainability in buildings and civil engineering works — Guidelines for the application of the general principles on sustainability

TC 67

ISO/CD 9635-4

Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO/CD 9635-5

Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves

ISO/DTS 16901

TC 27

Solid mineral fuels

Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface

ISO/CD 5074

Hard coal — Determination of Hardgrove grindability index

TC 68

Financial services

TC 29

Small tools

ISO/CD 12812-2

ISO/DTS 13399-2

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Mobile Financial Services — Part 2: Security and data protection for mobile financial services

ISO/CD 12812-3

Mobile Financial Services — Part 3: Financial application management

ISO Update, Supplement to ISO Focus -- April 2013

1

ISO/CD 12812-4

Mobile Financial Services — Part 4: Mobile Person-to-Person Payments

TC 102

Iron ore and direct reduced iron

ISO/CD 11536

Iron ores — Determination of loss on ignition — Gravimetric method

TC 171

Document management applications

ISO/CD TR 17797

Electronic archiving - Selection of digital storage media for long term preservation

TC 172

Optics and photonics

ISO/CD 17123-8

Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)

ISO/CD 18259

Ophthalmic optics — Contact lens care products — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms

TC 106

Dentistry

ISO/CD 3630-3

Dental root-canal instruments — Part 3: Condensers, pluggers and spreaders

TC 110

Industrial trucks

ISO/CD 10896-2

Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks

TC 121

Anaesthetic and respiratory equipment

TC 173

ISO/CD 18190

Anaesthetic and respiratory equipment — General requirements for airways and related equipment

Assistive products for persons with disability

ISO/CD 17966

Assistive products for personal hygiene

TC 184

Automation systems and integration

ISO/CD 8000-8

Data quality — Part 8: Information and data quality: Concepts and measuring

TC 122

Packaging

ISO/CD 17451-1

Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments — Part 1: Titre manque

TC 189

Ceramic tile Test methods and specifications for Cementitious Backer Units (CBUs)

TC 130

Graphic technology

ISO/CD 16575

ISO/CD 16760

Preparation and visualization of RGB images to be used in RGB-based graphic arts workflows

TC 193

Natural gas

TC 138

Plastics pipes, fittings and valves for the transport of fluids

ISO/DTR 22302

Natural gas — Calculation of methane number

ISO/DTR 4191

Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation

TC 207

Environmental management

ISO/CD 14001

Environmental management systems — Requirements with guidance for use

ISO/CD 6259-1

Thermoplastics pipes — Determination of tensile properties — Part 1: General test method

ISO/CD 6259-3

Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

TC 142

Cleaning equipment for air and other gases

ISO/CD 16891

Test methods for evaluating the durability of the cleanable dust control filter media

TC 150

Implants for surgery

ISO/CD 5840-2

Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted valve substitutes

ISO/CD 7198

Cardiovascular implants — Tubular vascular prostheses

ISO/CD 11491

Implants for surgery — Test method for impact resistance of ceramic femoral head for hip joint prostheses

ISO 27186:2010/ CD Amd 1

Active implantable medical devices — Fourpole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements — Amendment 1

ISO/DTR 16379

Tissue-engineered medical products — Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging

TC 159

Ergonomics

ISO/CD 24505

Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision

TC 163

Thermal performance and energy use in the built environment

ISO/CD 10077-2

Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames

TC 165

Timber structures

ISO/CD 16598

Timber structures — Structural classification for sawn timber

2

TC 234

Fisheries and aquaculture

ISO/CD 16488

Marine finfish farms — Requirement for infrastructure, dimensioning, design, installation, operation and management of open net cage systems

CASCO

Committee on conformity assessment

ISO/IEC DTS 17021-4

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management

JTC 1

Information technology

ISO/IEC CD 30101

Information technology — Sensor Networks: Sensor Network and its interfaces for smart grid system

ISO/IEC CD 30128

Information technology — Sensor Networks — Generic Sensor Network Application Interface

ISO/IEC PDTR 29181-5

Information technology — Future Network — Problem statement and requirements — Part 5: Security

ISO/IEC CD 24748-5

Systems and software engineering — Life cycle management — Part 5: Software development planning

ISO/IEC CD 29155-3

Systems and software engineering — Information technology project performance benchmarking framework — Part 3: Guidance for reporting

ISO/IEC CD 17839-2

Information technology — Identification cards — Biometric system on card — Part 2: Physical characteristics

ISO/IEC CD 30129

Application of equipotential bonding and earthing in buildings with information technology equipment

ISO/IEC CD 24734

Information technology — Office equipment — Method for measuring digital printing productivity


DIS circulated

ISO/DIS 11452-8

*

ISO/DIS 13674-2

*

ISO/DIS 12405-3

*

Period from 01 March to 31 March 2013 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only

TC 23 Vote terminates

TC 6 ISO/DIS 12625-7.2

Paper, board and pulps *

Tissue paper and tissue products — Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (Revision of ISO 12625-7:2007)

TC 8

Ships and marine technology

ISO/DIS 16554.2

Ships and marine technology — Marine environment protection — Measurement and reporting of underwater sound radiated from merchant ships

ISO/DIS 18421

ISO/DIS 18422

*

*

TC 17

Ships and marine technology - Inland navigation vessels Lifebuoy housings Ships and marine technology Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons

2013-05-15

*

ISO/DIS 16124

*

Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels (Revision of ISO 683-17:1999) Steel wire rod — Dimensions and tolerances

ISO/DIS 16122-4

*

ISO/DIS 11783-12

*

TC 24

ISO/DIS 16779

*

ISO/DIS 10327

TC 44

Air cargo - Main deck containers - Design and testing

ISO/DIS 5826.2

*

2013-06-19

ISO/DIS 9453

*

*

TC 22 ISO/DIS 8820-3

Space systems — Thermal Control Coatings for satellites and spacecraft — General requirements Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) (Revision of ISO 8820-3:2010)


Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services (Revision of ISO 11783-12:2009)

2013-08-29

2013-06-04

Methods for zeta potential determination — Part 3: Acoustic methods

2013-06-26

Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs

2013-06-30

Resistance welding equipment — Transformers — General specifications applicable to all transformers (Revision of ISO 5826:1999) Soft solder alloys — Chemical compositions and forms

2013-05-22

2013-08-29


2013-06-19 ISO/DIS 8030

*

ISO/DIS 11346

2013-06-22

Rubber and plastics hoses — Method of test for flammability

2013-08-29

(Revision of ISO 8030:1995)

2013-06-26 *

Road vehicles *

Agricultural and forestry machines — Inspection of sprayers and liquid fertilizer distributors in use — Part 4: Fixed and semi mobile sprayers

2013-08-29


TC 45

(Revision of ISO 10327:1995) ISO/DIS 16691

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers

Welding and allied processes

2013-08-29

Aircraft and space vehicles *

2013-06-23

Food products *


TC 20

Electrically propelled road vehicles - Test specification for Lithium-ion traction battery packs and systems — Part 3: Safety performance requirements

2013-06-09

Particle characterization including sieving

TC 34 2013-06-22

Steel

ISO/DIS 683-17

*

2013-05-16

2013-06-22

Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test (Revision of ISO 13674-2:2006)

2013-07-01


ISO/DIS 16119-4

ISO/DIS 13099-3

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields (Revision of ISO 11452-8:2007)

ISO/DIS 17403

*

Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use (Revision of ISO 11346:2004) Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration (cyanide-free method)

2013-06-30

2013-06-16

3

ISO/DIS 3302-1

*

TC 46 ISO/DIS 25577

Rubber — Tolerances for products — Part 1: Dimensional tolerances (Revision of ISO 3302-1:1996, ISO 3302-1:1996/Amd 1:2001)

(Revision of ISO 25761:2008) 2013-06-19

Information and documentation *

Information and documentation — MarcXchange

ISO/DIS 16904

ISO/DIS 16928

*

ISO/DIS 19901-8

ISO/DIS 15686-4

ISO/DIS 15512

2013-06-30

Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres

*

*

*

Buildings and Civil Engineering Works - Sealants - Determination of changes in adhesion, cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling Building Construction - Service Life Planning — Part 4: Service Life Planning using Building Information Modelling

*

Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics Plastics — Determination of water content

ISO/DIS 4895

ISO/DIS 15028

ISO/DIS 21048

ISO/DIS 25761

4

*

*

*

*

*

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method (Revision of ISO 22007-2:2008) Plastics — Liquid epoxy resins — Determination of tendency to crystallize (Revision of ISO 4895:1997) Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine (Revision of ISO 15028:2004) Plastics — Epoxy resins — Determination of 1,2-glycol content

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil Investigations

2013-08-15

2013-08-22

Sports and recreational equipment *

2013-06-16

TC 85

Requirements for sleeping bags

ISO/DIS 11665-10

Nuclear energy, nuclear technologies, and radiological protection *

2013-06-16

TC 106 ISO/DIS 7494-2

2013-06-16

2013-05-20

*

TC 112 ISO/DIS 3529-3

*

Dentistry — Dental units — Part 2: Media channels and connections (Revision of ISO 11144:1995, ISO 7494-2:2003) Vacuum technology — Vocabulary — Part 3: Vacuum gauges

2013-08-29

2013-06-18

(Revision of ISO 3529-3:1981)

TC 121


IEC/DIS 60601-1-12.2

Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment

2013-08-29 ISO/DIS 80601-2-70

*

2013-08-29

Medical Electrical Equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apneoa breathing therapy equipment (Revision of ISO 17510-1:2007)

TC 130

Graphic technology

ISO/DIS 12647-3.2

Graphic technology — Process control for the production of halftone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint (Revision of ISO 12647-3:2005)

2013-06-04


TC 131

Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen

ISO/DIS 3320 2013-06-30

2013-06-29

Vacuum technology

2013-08-29

2013-06-30

Measurement of radioactivity in the environment — Air: radon-222 — Part 10: Determination of diffusion coefficient in waterproof materials using activity concentration measurement

Dentistry

(Revision of ISO 15512:2008) ISO/DIS 22007-2

Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals

2013-08-22

Plastics *

TC 83 ISO/DIS 23537


TC 61 ISO/DIS 11358-3.2

Essential oil of ginger [Zingiber officinale Rosc.]

Gas cylinders *

TC 59 ISO/DIS 11617

*

Essential oils

TC 58 ISO/DIS 21172-1


2013-06-29


TC 54

TC 67

2013-06-29

2013-08-29

2013-05-12

Fluid power systems *

Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series

2013-06-16


(Revision of ISO 3320:1987, ISO 7181:1991) ISO/DIS 18413

*

TC 145 ISO 7010:2011/ DAmd 168

*

ISO 7010:2011/ DAmd 170

*

*

ISO 7010:2011/ DAmd 173

*

ISO 7010:2011/ DAmd 174

*

ISO 7010:2011/ DAmd 175

*

ISO 7010:2011/ DAmd 176

*

ISO 7010:2011/ DAmd 177

ISO 7010:2011/ DAmd 178

*

*

TC 150 ISO/DIS 11663

Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 168: Safety sign W037: Warning; Run over by remote operator controlled machine Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 169: Safety sign P009: No climbing Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 170: Safety sign M047: Use self-contained breathing appliance Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 171: Safety sign M046: Secure gas cylinders Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 173: Safety sign E035: Liferaft knife Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 174: Safety sign E059: Escape ladder Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 175: Safety sign E060: Evacuation chair Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 176: Safety sign M048: Use gas detector Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 177: Safety sign M049: Wear protective roller sport equipment Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 178: Safety sign P039: Hot works prohibited

ISO/DIS 26722

Quality of dialysis fluid for haemodialysis and related therapies

*

Concentrates for haemodialysis and related therapies (Revision of ISO 13958:2009)


*

TC 154

ISO/DIS 9735-10

*

TC 161

ISO/DIS 23551-6

*

2013-06-16

TC 163

2013-06-16

ISO/DIS 9972

*

*

Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 10: Syntax service directories (Revision of ISO 9735-10:2002)

2013-06-19

Safety and control devices for gas burners and gas-burning appliances - Particular requirements — Part 6: Thermoelectric flame supervision controls

2013-06-22

Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method (Revision of ISO 9972:2006, ISO 9972:2006/Amd 1:2009)

2013-08-15

Metallic materials — Brinell hardness test — Part 1: Test method

2013-08-08

(Revision of ISO 6506-1:2005) ISO/DIS 6506-2

*

ISO/DIS 6506-3

*

ISO/DIS 6506-4

*

ISO/DIS 6508-1

*

ISO/DIS 6508-2

*

2013-06-16

2013-06-23

2013-06-23

2013-06-23

Mechanical testing of metals

2013-06-16

2013-06-16

Water treatment equipment for haemodialysis applications and related therapies (Revision of ISO 26722:2009)

2013-06-23


TC 164 ISO/DIS 6506-1

Guidance for the preparation and quality management of fluids for haemodialysis and related therapies (Revision of ISO 23500:2011)

Control and protective devices for gas and/or oil burners and appliances

2013-06-16

2013-06-16

2013-06-23

Processes, data elements and documents in commerce, industry and administration

2013-06-16

(Revision of ISO 11663:2009) ISO/DIS 13958

*

2013-06-16

2013-06-16

Water for haemodialysis and related therapies (Revision of ISO 13959:2009)

ISO/DIS 23500

Implants for surgery *

*

2013-06-04

Graphical symbols *

ISO 7010:2011/ DAmd 169

ISO 7010:2011/ DAmd 171

Hydraulic fluid power — Cleanliness of parts and components — Inspection document and principles related to contaminant collection, analysis and data reporting (Revision of ISO 18413:2002)

ISO/DIS 13959

Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines (Revision of ISO 6506-2:2005) Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks (Revision of ISO 6506-3:2005) Metallic materials — Brinell hardness test — Part 4: Table of hardness values (Revision of ISO 6506-4:2005) Metallic materials — Rockwell hardness test — Part 1: Test method (Revision of ISO 6508-1:2005) Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters (Revision of ISO 6508-2:2005)

2013-08-08

2013-08-08

2013-08-08

2013-08-15

2013-08-15

5

ISO/DIS 6508-3

*

ISO/DIS 16859-1

*

ISO/DIS 16859-2

*

ISO/DIS 16859-3

*

TC 165 *

ISO/DIS 12122-2

*

TC 172

*

ISO/DIS 17572-2

*

ISO/DIS 17572-3

*

2013-08-08

2013-08-08

2013-08-08

Timber structures — Determination of Characteristic values — Part 1: Basic requirements (Revision of ISO/PWI 12122) Timber structures — Determination of Characteristic values — Part 2: Sawn timber (Revision of ISO/PWI 12122)

2013-06-16

TC 206 2013-06-16

Microscopes — Screw threads for objectives and related nosepieces (Revision of ISO 8038:2011)

2013-06-12

ISO/DIS 17094

Wheelchairs - Technical systems and aids for disabled or handicapped persons — Part 22: Set-up procedures (Revision of ISO 7176-22:2000)

*

ISO/DIS 8124-6

*

TC 198

Safety of toys — Part 5: Determination of total concentration of certain elements in toys Safety of toys — Part 6: Toys and children's products — Determination of phthalate plasticizers in polyvinyl chloride plastics

*

ISO 116072:2006/DAmd 1

*

TC 201

Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems — Amendment 1 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1

ISO/DIS 18893

Surface chemical analysis Scanning Probe MicroscopyStandards on the definition and calibration of spatial resolution of Scanning Spreading Resistance Microscopy and Scanning Capacitance Microscopy

*

TC 220 *

TC 238

ISO/DIS 16995

Intelligent transport systems TC 247

Environmental management — Water footprint — Principles, requirements and guidelines

2013-06-19

Geographic information — Transfer Nodes

2013-06-16

Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out — Amendment 1

2013-08-29

Mobile elevating work platforms — Safety principles, inspection, maintenance and operation (Revision of ISO 18893:2004)

2013-06-16

Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements (Revision of ISO 21029-2:2004)

2013-06-24

Solid biofuels *

2013-06-19 ISO/DIS 16994

2013-06-19

Cryogenic vessels

2013-08-15

ISO/DIS 16993

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment

Elevating work platforms *

2013-08-15 ISO/DIS 21029-2

2013-06-24

Dimensional and geometrical product specifications and verification

TC 214

Surface chemical analysis *

*

2013-06-26

2013-06-19

Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3: Dynamic location references (dynamic profile) (Revision of ISO 17572-3:2008, ISO 17572-3:2008/Cor 1:2009)

2013-06-24

Geographic information/ Geomatics

TC 213

Sterilization of health care products

ISO 116071:2006/DAmd 1

6

*

2013-06-26

ISO 1101:2012/ DAmd 1

Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile) (Revision of ISO 17572-2:2008)

2013-06-24



Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 1: General requirements and conceptual model (Revision of ISO 17572-1:2008)

Fine ceramics *


Safety of toys

ISO/DIS 8124-5

TC 204

Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks

*


TC 181

ISO/DIS 13083

Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices

ISO/DIS 17572-1

Optics and photonics *

TC 173 ISO/DIS 7176-22

Metallic materials — Leeb hardness test — Part 1: Test method

2013-08-15

Timber structures

ISO/DIS 12122-1

ISO/DIS 8038

Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (Revision of ISO 6508-3:2005)

*

*

Solid biofuels — Conversion of analytical results from one basis to another

2013-08-15

Solid biofuels — Determination of total content of sulphur and chlorine

2013-08-15

Solid biofuels — Determination of the water soluble content of chloride, sodium and potassium

2013-08-15

Fraud countermeasures and controls


ISO/DIS 34001

*

Security Management System 2013-06-26


Traditional chinese medicine *

JTC 1 *

ISO/IEC DIS 15026-1

*

ISO/IEC 15414:2006/ DAmd 1

*

ISO/IEC DIS 25063.3

ISO/IEC DIS 29121

ISO/IEC DIS 14776-251

ISO/IEC 13818-1/ DAmd 3

ISO/IEC DIS 23000-13

ISO/IEC DIS 23005-7

2013-06-19


ISO/IEC DIS 24771

ISO/IEC DIS 25051

Sterile acupuncture needles for single use

*

*

*

*

*

*

*

MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment (Revision of ISO/IEC 24771:2009) Systems and software engineering — Systems and software assurance — Part 1: Concepts and vocabulary (Revision of ISO/IEC TR 15026-1:2010) Information technology — Open distributed processing — Reference model — Enterprise language — Amendment 1: ODP — The expression of Obligations and Policies Software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing (Revision of ISO/IEC 25051:2006, ISO/IEC 25051:2006/Cor 1:2007) Systems and software engineering — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description Information technology — Digitally recorded media for information interchange and storage — Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks (Revision of ISO/IEC 29121:2009) Information technology -Small computer system interface (SCSI) — Part 251: USB attached SCSI (UAS) Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — Amendment 3: Transport of HEVC video over MPEG-2 systems Information technology - Multimedia application format (MPEG-A) — Part 13: Augmented reality application format Information technology — Media context and control — Part 7: Conformance and reference software (Revision of ISO/IEC 23005-7:2011)


ISO/IEC DIS 23009-2

*

ISO/IEC 19788-1:2011/ DAmd 1

*

ISO/IEC DIS 19794-7

*

2013-06-23

Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 2: Conformance and reference software Information technology — Learning, education and training — Metadata for learning resources — Part 1: Framework — Amendment 1 Information technology — Biometric data interchange formats — Part 7: Signature/sign time series data (Revision of ISO/IEC 197947:2007, ISO/IEC 19794-7:2007/ Cor 1:2009)

2013-06-23

2013-06-19

2013-06-23

2013-06-19

2013-06-16

FDIS circulated Period from 01 March to 31 March 2013

2013-06-23

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only

Vote terminates

2013-05-21

CIE

International Commission on Illumination

ISO/FDIS 11664-6

Colorimetry — Part 6: CIEDE2000 Colour-difference formula

TC 4 2013-06-30

ISO/FDIS 3290-1

2013-08-29

Rolling bearings *

Rolling bearings — Balls — Part 1: Steel balls

2013-05-07

(Revision of ISO 3290-1:2008, ISO 3290-1:2008/Cor 1:2009) ISO/FDIS 3290-2

*

Rolling bearings — Balls — Part 2: Ceramic balls

2013-05-07

(Revision of ISO 3290-2:2008) 2013-06-24

TC 6 ISO/FDIS 3037

Paper, board and pulps *

2013-06-22

TC 10

2013-06-12

Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) (Revision of ISO 3037:2007)

2013-06-15

Technical product documentation

ISO/FDIS 128-15

*

ISO/FDIS 128-24

*

ISO/FDIS 129-4

*

2013-06-25

Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings (Revision of ISO 128-24:1999) Technical product documentation (TPD) — Indication of dimensions and tolerances — Part 4: Dimensioning of shipbuilding drawings

2013-05-26

2013-05-16

2013-05-26

7

TC 17 ISO/FDIS 377

ISO/FDIS 404

ISO/FDIS 10474

Steel *

*

*

Steel and steel products — Location and preparation of samples and test pieces for mechanical testing (Revision of ISO 377:1997, ISO 377:1997/Cor 1:1997) Steel and steel products — General technical delivery requirements (Revision of ISO 404:1992) Steel and steel products — Inspection documents

2013-05-29

ISO/FDIS 6517

2013-05-29

2013-05-29

Air cargo — Certified lower deck containers — Design and testing

*

ISO/FDIS 13044-2

*

ISO/FDIS 23273-2

*

TC 27 ISO/FDIS 23499

ISO/FDIS 1170

Internal combustion engines — Piston pins — Part 1: General specifications (Revision of ISO 18669-1:2004) Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface Fuel cell road vehicles — Safety specifications — Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen (Revision of ISO 23273-2:2006)

*

Coal — Determination of bulk density for the use in charging of coke ovens (Revision of ISO 23499:2008) Coal and coke — Calculation of analyses to different bases

*

TC 34 ISO 7218:2007/ FDAmd 1

*

2013-05-13

TC 43

8

TC 58

Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations — Amendment 1 Cinematography — Theatre projection leader, trailer and cue marks — Specifications (Revision of ISO 4241:2001) Textiles — Determination of antibacterial activity of textile products (Revision of ISO 20743:2007)

Acoustics

Rubber — Guide to the calibration of test equipment

2013-05-27

*

TC 79 *

2013-05-26

Petroleum and natural gas industries — Downhole equipment — Completion accessories

2013-05-22

Anodizing of aluminium and its alloys — Terms and definitions

2013-05-20


2013-05-26

TC 85 2013-05-26

Carbon fibre — Determination of volume resistivity

Light metals and their alloys

2013-05-28 ISO/FDIS 7583

2013-05-22


2013-05-09

ISO/FDIS 14998

Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing — Amendment 1: Requirements for design of tubes for embrittling gases

Plastics *

TC 67

ISO/ASTM FDIS 51539


Guide for use of radiation-sensitive indicators

2013-05-20

(Revision of ISO/ASTM 51539:2005) 2013-05-15

ISO/ASTM FDIS 51939

*

Practice for blood irradiation dosimetry

2013-05-20

(Revision of ISO/ASTM 51939:2005) ISO/FDIS 13304-1

*

2013-05-26

Textiles *

2013-05-15

Gas cylinders *


Cinematography *


*

Food products

TC 36 ISO/FDIS 4241

Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen (Revision of ISO 11722:1999)

Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints


2013-05-14

(Revision of ISO 1170:2008) ISO/FDIS 11722

*

Solid mineral fuels *

2013-05-08


TC 45

ISO 11120:1999/ FDAmd 1

Road vehicles

ISO/FDIS 18669-1

Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours — Amendment 1

(Revision of ISO 18899:2004) 2013-05-26


TC 22

ISO/FDIS 12996

ISO/FDIS 18899

Aircraft and space vehicles *

*

TC 44


TC 20

ISO 2922:2000/ FDAmd 1

TC 94

2013-05-16

Personal safety -- Protective clothing and equipment

2013-05-22 ISO/FDIS 12311

Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles

*

Personal protective equipment — Test methods for sunglasses and related eyewear

2013-05-29


ISO/FDIS 12312-1

ISO/FDIS 12609-1

ISO/FDIS 12609-2

*

*

*


*

Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use Cranes and hoists — Selection of wire ropes, drums and sheaves (Revision of ISO 43082:1988, ISO 8087:1985, ISO 4308-1:2003) Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes (Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO 1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)

ISO/FDIS 12110-1

*

ISO/FDIS 12110-2

*

2013-05-12

2013-05-12

TC 182 *

ISO 146882:2004/FDAmd 1

*

Dentistry — Hydrocolloid impression materials

ISO/FDIS 20958

Enterprise-control system integration — Part 1: Models and terminology (Revision of IEC 62264-1:2003)

IEC/FDIS 62264-2

Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control system integration (Revision of IEC 62264-2:2004)

TC 188

Small craft

ISO/FDIS 7840

TC 130 ISO/FDIS 12647-7

ISO/FDIS 16759

*

*

*

Graphic technology — Process control for the production of halftone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data (Revision of ISO 12647-7:2007) Graphic technology — Quantification and communication for calculating the carbon footprint of print media products

*

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use — Amendment 1

Method for evaluation of tensile properties of metallic superplastic materials


Small craft — Fire-resistant fuel hoses

2013-06-29

2013-06-29

2013-05-09

2013-05-09

2013-05-08

*

Small craft — Non-fire-resistant fuel hoses

2013-05-08

ISO/FDIS 10088

*

Small craft — Permanently installed fuel systems

2013-05-08


TC 189 2013-05-16

ISO/FDIS 10545-9

Ceramic tile *

TC 190 2013-05-16

ISO/FDIS 17380

2013-05-16

ISO 111371:2006/FDAmd 1

TC 204

Ceramic tiles — Part 9: Determination of resistance to thermal shock (Revision of ISO 10545-9:2004)

2013-05-29

Soil quality *

TC 198

Mechanical testing of metals *

2013-05-27

(Revision of ISO 8469:2006) 2013-05-08



ISO/FDIS 8469

Graphic technology

TC 138

ISO 10928:2009/ FDAmd 1

Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors

2013-05-27


Mechanical vibration, shock and condition monitoring *

Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification — Amendment 1

IEC/FDIS 62264-1

(Revision of ISO 1563:1990, ISO 13716:1999, ISO 1564:1995)

TC 108

Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description — Amendment 1


2013-05-19

2013-05-22

Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods

TC 184

Dentistry *

Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements

Geotechnics

ISO 146881:2002/FDAmd 1 2013-05-06

Freight containers *


Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products

(Revision of ISO 20032:2007) 2013-05-29

Cranes

TC 104 ISO/FDIS 1496-1

Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use

Soil quality — Determination of total cyanide and easily liberatable cyanide — Continuous-flow analysis method (Revision of ISO 17380:2004)

2013-05-08

Sterilization of health care products *

Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices — Amendment 1

2013-05-29

Intelligent transport systems

2013-05-14

9

ISO/FDIS 15623

*

TC 213

2013-05-26


ISO/FDIS 2538-1

*

ISO/FDIS 2538-2

*

JTC 1 ISO/IEC FDIS 18180

*

ISO/IEC FDIS 21000-21

*


*


*


Intelligent Transport Systems — Forward vehicle collision warning systems — Performance requirements and test procedures (Revision of ISO 15623:2002)

*

Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes (Revision of ISO 2538:1998) Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing (Revision of ISO 2538:1998)

ISO 10511:2012/ Cor 1

Prevailing torque type hexagon thin nuts (with non-metallic insert) — Technical Corrigendum 1

TC 6

Paper, board and pulps

ISO 12625-11:2012

Tissue paper and tissue products — Part 11: Determination of wet ball burst strength

TC 8

Ships and marine technology

2013-05-29

ISO 16304:2013

*

2013-05-29

ISO 16446:2013

*


TC 17

Information technology — Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2

*

2013-05-09

ISO 14404-1:2013

ISO 14404-2:2013

*

2013-05-23

Information technology — Multimedia framework (MPEG-21) — Part 21: Media Contract Ontology Information technology — MPEG systems technologies — Part 8: Coding-independent code points Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 4: Segment encryption and authentication Information technology — Real time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface

2013-05-28

2013-05-16

Standards published New International Standards published between 01 March and 31 March 2013

Ships and marine technology — Marine environment protection — Adapter for joining dissimilar boom connectors

E

L

C

Steel

TC 20 2013-05-28

Ships and marine technology — Marine environment protection — Arrangement and management of port waste reception facilities

free

Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1: Steel plant with blast furnace Calculation method of carbon dioxide emission intensity from iron and steel production — Part 2: Steel plant with electric arc furnace (EAF)

M

K


ISO 13832:2013

*

ISO 16049-1:2013

*

Aerospace — Wire, aluminium alloy and copper-clad aluminium conductors — General performance requirements

F

Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods

K

TC 22

Road vehicles

ISO 11451-4:2013

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)

ISO 14229-1:2013

*

ISO 14229-6:2013

*

ISO 14230-2:2013

*

ISO 12345:2013

*

ISO 14451-1:2013

*

Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line) Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer Diesel engines — Cleanliness assessment of fuel injection equipment

D

XC

E

U

R

* Available in English only ** French version of standard previously published in English only

Price group

IIW ISO 14346:2013

International Institute of Welding *

Static design procedure for welded hollow-section joints — Recommendations

U

TC 2

Fasteners

ISO 4034:2012/ Cor 1

Hexagon regular nuts (style 1) — Product grade C — Technical Corrigendum 1

free

ISO 7719:2012/ Cor 1

Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 — Technical Corrigendum 1

free

10

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 1: Terminology

G

ISO 14451-2:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 2: Test methods

M

ISO 14451-3:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 3: Labelling

ISO 14451-4:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 4: Requirements and categorization for micro gas generators

ISO 14451-5:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 5: Requirements and categorization for airbag gas generators

C

B

C


ISO 14451-6:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 6: Requirements and categorization for airbag modules

ISO 14451-7:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 7: Requirements and categorization for seatbelt pretensioners

ISO 14451-8:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 8: Requirements and categorization for igniters

ISO 14451-9:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 9: Requirements and categorization for actuators

ISO 14451-10:2013

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 10: Requirements and categorization for semi-finished products

TC 29

Small tools

ISO 525:2013

Bonded abrasive products — General requirements

C

ISO 11890-2:2013

Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method

B

ISO 15110:2013

Paints and varnishes — Artificial weathering including acidic deposition

Textiles

B

ISO 105-E01:2013

Textiles — Tests for colour fastness — Part E01: Colour fastness to water

C

B

ISO 105-E02:2013

Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water

C

A

ISO 105-E04:2013

Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration

TC 41

Pulleys and belts (including veebelts)

G

ISO 340:2013

Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method

C

ISO 21178:2013

Light conveyor belts — Determination of electrical resistances

L

ISO 21179:2013

Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt

TC 42

Photography

Tools for pressing — Sliding plates

ISO 5609-1:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections

ISO 5609-2:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F

D

ISO 5609-3:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K

D

ISO 5609-4:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L

D

ISO 5609-5:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U

D

ISO 5609-6:2012

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q

D

TC 34

Food products

ISO 6887-6:2013

Microbiology of food and animal feed — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 6: Specific rules for the preparation of samples taken at the primary production stage Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification

ISO/TS 15216-2:2013

Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 2: Method for qualitative detection

ISO 21571:2005/ Amd 1:2013

Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Nucleic acid extraction — Amendment 1

TC 35

ISO 2721:2013

ISO 18927:2013

*

*

TC 43 ISO/PAS 11819-4:2013

N

XZ

Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity

*

Acoustics — Method for measuring the influence of road surfaces on traffic noise — Part 4: SPB method using backing board


ISO 15012-1:2013

Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: Requirements for testing and marking of separation efficiency

ISO/TR 15608:2013

Welding — Guidelines for a metallic materials grouping system

ISO 15609-6:2013

Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 6: Laser-arc hybrid welding

TC 45


ISO 33841:2011/Amd 1:2013

Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature — Amendment 1: Revised calibration schedule

TC 46


ISO 25964-2:2013

TC 54

C

D

K

C

F

M

Acoustics

E

P

Photography — Film-based cameras — Automatic controls of exposure

TC 44

Paints and varnishes


G

TC 38

ISO 23480:2013

ISO/TS 15216-1:2013

J

*

Information and documentation — Thesauri and interoperability with other vocabularies — Part 2: Interoperability with other vocabularies

E

G

D

E

XZ

X

Essential oils

11

ISO 4719:2012

ISO 4731:2012

Essential oil of spike lavender (Lavandula latifolia Medikus), Spanish type

D

Essential oil of geranium (Pelargonium x ssp.)

E

TC 58

Gas cylinders

ISO 11114-2:2013

Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials

TC 59


ISO 16354:2013

*

Guidelines for knowledge libraries and object libraries

TC 61

Plastics

ISO 11357-5:2013

Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

ISO 307:2007/ Amd 1:2013

ISO 12817:2013

Plastics — Polyamides — Determination of viscosity number — Amendment 1: Corrections, and update to reference to JIS K 6920-2 *

TC 67

Fibre-reinforced plastic composites — Determination of open-hole compression strength

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals

ISO 14692-2:2002

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture

TC 69

Applications of statistical methods

ISO 7870-2:2013

*

ISO 11843-6:2013

*

Control charts — Part 2: Shewhart control charts Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

TC 70

Internal combustion engines

ISO 8528-5:2013

Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets

TC 83

Sports and recreational equipment

ISO 5902:2013

Alpine skis — Determination of elastic properties

TC 85

12

W

E

XZ

J


ISO 13628-5:2009

ISO/ASTM 51261:2013

G

Practice for calibration of routine dosimetry systems for radiation processing

*

ISO/ASTM 51702:2013

*

ISO/ASTM 51940:2013

*

ISO/ASTM 52116:2013

*

Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations Practice for dosimetry in a gamma facility for radiation processing

D

Guide for dosimetry for sterile insects release programs

F

Practice for dosimetry for a self-contained dry-storage gamma irradiator

F

TC 92

Fire safety

ISO 14934-2:2013

Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods

ISO/TS 13447:2013

*

Fire safety engineering — Guidance for use of fire zone models

TC 94


ISO 20471:2013

High visibility clothing — Test methods and requirements

TC 98 ISO 3898:2013

E

T

K

L

Bases for design of structures *

Bases for design of structures — Names and symbols of physical quantities and generic quantities

TC 106

Dentistry

ISO 6873:2013

Dentistry — Gypsum products

S

K XC

X

ISO 1797-3:2013 ISO 16635-1:2013

Dentistry — Shanks for rotary instruments — Part 3: Shanks made of ceramics *

TC 108

S

K

ISO 18436-8:2013

E

J

Dentistry — Dental rubber dam technique — Part 1: Hole punch

D

B

Mechanical vibration, shock and condition monitoring *

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 8: Ultrasound

TC 112

Vacuum technology

ISO 3567:2011

Vacuum gauges — Calibration by direct comparison with a reference gauge

ISO 27893:2011

Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

TC 117

Fans

ISO 12759:2010/ Amd 1:2013

Fans — Efficiency classification for fans — Amendment 1

TC 119

Powder metallurgy

ISO 4492:2013

Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering

R


ISO/ASTM 51631:2013

TC 122

Packaging

ISO 13127:2012/ Cor 1:2012

Packaging — Child resistant packaging — Mechanical test methods for reclosable child resistant packaging systems — Technical Corrigendum 1

E

G

H

XZ

D

free


ISO/TR 16218:2013

*

Packaging and the environment — Processes for chemical recovery

TC 126

Tobacco and tobacco products

ISO 10315:2013

Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method

TC 127

Earth-moving machinery

ISO 7133:2013

*

TC 131 ISO 14540:2013

ISO 14541:2013

Earth-moving machinery — Scrapers — Terminology and commercial specifications

ISO 8637:2010/ Amd 1:2013

*

D

TC 155

*

Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar) Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose Hydraulic fluid power — Two-, threeand four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads

TC 142


ISO 10121-2:2013

Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)

ISO 29462:2013

Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow

TC 146

Air quality

ISO 13833:2013

Stationary source emissions — Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide — Radiocarbon sampling and determination

ISO 16911-1:2013

Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method

ISO 16911-2:2013

Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 2: Automated measuring systems *

Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution

TC 147

Water quality

ISO 27108:2010

Water quality — Determination of selected plant treatment agents and biocide products — Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)

ISO 5667-3:2012

Water quality — Sampling — Part 3: Preservation and handling of water samples

TC 150


ISO 5840-3:2013

Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques


Cardiovascular implants and extracorporeal systems — Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators — Amendment 1: Revision to Figure 2 — Main fitting dimensions of dialysis fluid inlet and outlet ports

XZ

Nickel and nickel alloys

K

ISO 11433:1993/ Amd 1:2013

*

C

TC 156

Corrosion of metals and alloys

ISO 7539-1:2012

Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures

K

Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method

F

Fluid power systems *

ISO/TR 17209:2013

ISO 25597:2013

F

C

F

R

S

R

X

ISO 7539-10:2013 ISO 13174:2012

Cathodic protection of harbour installations

ISO 21601:2013

Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service

TC 159

Ergonomics

ISO 9241-154:2013

Ergonomics of human-system interaction — Part 154: Interactive voice response (IVR) applications

TC 163


ISO 12655:2013

*

ISO 18096:2013

*

TC 165 ISO/TR 18267:2013

U

V

*

*

TC 172

Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature for preformed pipe insulation

P

K

Q

G

H

Timber structures — Review of design standards

M

Optics and photonics

ISO/TR 16743:2013

*

ISO 8600-1:2013

*

Optics and photonics — Wavefront sensors for characterising optical systems and optical components

N

Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements

G

ISO 11553-3:2013

Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)

TC 178

Lifts, escalators and moving walks

ISO 22201-2:2013 XA

Energy performance of buildings — Presentation of measured energy use of buildings

XZ

Timber structures

R

S

Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption spectrometric method — Amendment 1: Alternative procedure for the preparation of the titanium standard solution

*

Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 2: Escalators and moving walks (PESSRAE)

F

M

13

ISO/TR 22201-3:2013

*

TC 184 ISO 16739:2013

Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE

E

Automation systems and integration *

Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries

Small craft

ISO 16180:2013

Small craft — Navigation lights — Installation, placement and visibility

ISO 15027-1:2012

Immersion suits — Part 1: Constant wear suits, requirements including safety

J

ISO 15027-2:2012

Immersion suits — Part 2: Abandonment suits, requirements including safety

K

ISO 15027-3:2012

Immersion suits — Part 3: Test methods

TC 190

Soil quality

ISO 13196:2013

Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument

TC 195

Building construction machinery and equipment

ISO 15688:2012

Road construction and maintenance equipment — Soil stabilizers — Terminology and commercial specifications

TC 198

Sterilization of health care products

ISO 134086:2005/Amd 1:2013

Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1

ISO/TR 19319:2013

TC 204 *

ISO/TS 13141:2010/ Cor 1:2013

*

ISO/TR 13184-1:2013

*

ISO 14906:2011/ Cor 1:2013

*

ISO/TS 175751:2010/Cor 1:2013

*

Electronic fee collection — Information exchange between service provision and toll charging — Technical Corrigendum 1 Electronic fee collection — Localisation augmentation communication for autonomous systems — Technical Corrigendum 1 Intelligent transport systems — Guidance protocol via personal ITS station for advisory safety systems — Part 1: General information and use case definitions Electronic fee collection — Application interface definition for dedicated shortrange communication — Technical Corrigendum 1 Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging — Technical Corrigendum 1

*

ISO 11894-1:2013

F

J

XZ

XA

free

free

*

Intelligent transport systems — Freight land conveyance content identification and communication — Part 1: Context, architecture and referenced standards Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes

ISO 14574:2013

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties

ISO 23146:2012

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method

TC 207


ISO 14065:2013

Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition

TC 209

Cleanrooms and associated controlled environments

ISO 14644-10:2013

Cleanrooms and associated controlled environments — Part 10: Classification of surface cleanliness by chemical concentration

TC 212

Clinical laboratory testing and in vitro diagnostic test systems

ISO 15189:2012

Medical laboratories — Requirements for quality and competence

ISO 19001:2013

In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology

TC 215

Health informatics

ISO 13120:2013

Health informatics — Syntax to represent the content of healthcare classification systems — Classification Markup Language (ClaML)

ISO/TS 13582:2013

*

JTC 1

free

X

Health informatics — Sharing of OID registry information

D

J

J

N

P

T

G

R

N


ISO/IEC 17568:2013

*

M

ISO/IEC 18092:2013

*

free

ISO/IEC 18450:2013

*

free

Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data — Technical Corrigendum 1

Fine ceramics

J


ISO 12855:2012/ Cor 1:2013

14

Surface chemical analysis — Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods

ISO 26683-1:2013

E

Surface chemical analysis *

*

TC 206 L

TC 188

TC 201

ISO/TS 175753:2011/Cor 1:2013

Information technology — Telecommunications and information exchange between systems — Close proximity electric induction wireless communications Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1) Information technology — Telecommunications and information exchange between systems — Web Services Description Language (WSDL) for CSTA Phase III

X

S

XC


ISO/IEC 19770-1:2012 ISO/IEC TR 24772:2013

Information technology — Software asset management — Part 1: Processes and tiered assessment of conformance *

ISO/IEC TR 29108:2013

*

ISO/IEC 24761:2009/ Cor 1:2013

*

ISO/IEC 29115:2013

*

ISO/IEC 29142-1:2013

*

ISO/IEC 29142-2:2013

*

ISO/IEC 1544411:2007/Amd 1:2013

*

ISO/IEC 23005-6:2013

*

ISO/IEC 23006-5:2013

*

ISO/IEC 15961-1:2013

*

ISO/IEC 15962:2013

*

ISO/IEC 29160:2012

ISO 129-1:2004 W

Information technology — Programming languages — Guidance to avoiding vulnerabilities in programming languages through language selection and use

XC

Information technology — Terminology for intelligent homes Information technology — Security techniques — Authentication context for biometrics — Technical Corrigendum 1

W

free

Information technology — Security techniques — Entity authentication assurance framework Information technology — Print cartridge characterization — Part 1: General: terms, symbols, notations and cartridge characterization framework Information technology — Print cartridge characterization — Part 2: Cartridge characterization data reporting Information technology — JPEG 2000 image coding system: Wireless — Part 11: — Amendment 1: IP based wireless networks Information technology — Media context and control — Part 6: Common types and tools Information technology — Multimedia service platform technologies — Part 5: Service aggregation Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 1: Application interface Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions Information technology — Radio frequency identification for item management — RFID Emblem

ISO/IEC 19794-9:2011/ Amd 1:2013

*

ISO/IEC 19794-14:2013

*

Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 1: Conformance testing methodology Information technology — Biometric data interchange formats — Part 14: DNA data

Standards confirmed The following International Standards are confimred for a five year period:

TC 2

Fasteners

ISO 16047:2005

TC 10



R

N

TC 20


ISO 14950:2004

(reconfirmed)

ISO 15390:2004

(reconfirmed)

ISO 16458:2004

(reconfirmed)

ISO 17401:2004

(reconfirmed)

TC 22

Road vehicles

ISO 10605:2008 ISO 15764:2004

(reconfirmed)

TC 23


ISO 2057:1981

(reconfirmed)

ISO 6489-1:2001

(reconfirmed)

ISO 8759-1:1998

(reconfirmed)

ISO 20019:2001

(reconfirmed)

ISO 26322-1:2008 ISO 14131:2005

(reconfirmed)

TC 30

Measurement of fluid flow in closed conduits

ISO 2975-1:1974

(reconfirmed)

H

XZ

TC 34

Food products

ISO/TS 2963:2006

(reconfirmed)

ISO/TS 27105:2009 XB

U

XB

XC

ISO/TS 27106:2009

TC 35


ISO 8502-5:1998

(reconfirmed)

TC 36

Cinematography

ISO 8567:2002

(reconfirmed)

TC 38

Textiles

ISO 7771:1985

(reconfirmed)

TC 39

Machine tools

ISO 5169:1977

(reconfirmed)

ISO/TR 230-9:2005 K

XZ

ISO 13041-7:2004

(reconfirmed)

TC 41


ISO 5290:2001

(reconfirmed)

TC 45


ISO 11193-1:2008 R

TC 48

Laboratory equipment

ISO 4785:1997

(reconfirmed)

ISO 4798:1997

(reconfirmed)

ISO 12771:1997

(reconfirmed)

ISO 12772:1997

(reconfirmed)

ISO 15212-2:2002

(reconfirmed)

ISO 718:1990

(reconfirmed)

ISO 720:1985

(reconfirmed)

ISO 1776:1985

(reconfirmed)

ISO 12775:1997

(reconfirmed)

TC 59


ISO 3443-3:1987

(reconfirmed)

ISO 3443-5:1982

(reconfirmed)

TC 63

Glass containers

ISO 7459:2004

(reconfirmed)

ISO 8113:2004

(reconfirmed) 15

TC 72

Textile machinery and accessories

ISO 4392-1:2002

(reconfirmed)

ISO 98:2001

(reconfirmed)

TC 135

Non-destructive testing

ISO 344:1981

(reconfirmed)

ISO 11699-1:2008

ISO 8114:1990

(reconfirmed)

TC 138

ISO 8115:1986

(reconfirmed)


ISO 8489-1:1995

(reconfirmed)

ISO 8361-1:1991

(reconfirmed)

ISO 8489-2:1995

(reconfirmed)

ISO 8361-3:1991

(reconfirmed)

ISO 8489-3:1995

(reconfirmed)

TC 147

Water quality

ISO 8489-4:1995

(reconfirmed)

ISO 6107-6:2004

(reconfirmed)

ISO 8489-5:1995

(reconfirmed)

TC 192

Gas turbines

ISO 28239:2008

ISO 2314:2009

ISO 363-1:2006

ISO 3977-1:1997

(reconfirmed)

ISO 363-2:2006

ISO 3977-2:1997

(reconfirmed)

ISO 366-4:2005

ISO 3977-3:2004

(reconfirmed)

ISO 366-5:2006

ISO 3977-7:2002

(reconfirmed)

ISO 5247-3:1993

(reconfirmed)

ISO 3977-8:2002

(reconfirmed)

ISO 7506:1984

(reconfirmed)

TC 195


(reconfirmed)

ISO 15878:2008

ISO 7839:2005 ISO 8116-1:1995 ISO 8117:2003

ISO 19433:2008

ISO 8118-1:2006

ISO 19452:2008

ISO 8118-2:2006

TC 211

Geographic information/Geomatics

ISO 8119-1:1989

(reconfirmed)

ISO 19106:2004

(reconfirmed)

ISO 8119-2:1989

(reconfirmed)

ISO 19113:2002

ISO 8121:2007

ISO 19116:2004

(reconfirmed)

ISO 8122:2003

ISO 19125-1:2004

(reconfirmed)

ISO 8188:2007

ISO 19125-2:2004

(reconfirmed)

ISO 8640-1:2004

(reconfirmed)

JTC 1


ISO 8640-2:2004

(reconfirmed)

ISO 8640-3:2002

(reconfirmed)

ISO/IEC 7816-2:2007

ISO 9473-1:2006

ISO/IEC 10967-2:2001

ISO 9473-2:2006

ISO 1861:1975

(reconfirmed)

ISO 10223:2005

ISO 4057:1986

(reconfirmed)

ISO 11675:2005

ISO 8063-1:1986

(reconfirmed)

ISO 13990-1:2006

ISO 8063-2:1986

(reconfirmed)

ISO 13990-2:2006

ISO 8378-2:1986

(reconfirmed)

ISO 13990-3:2006

ISO 8378-3:1986

(reconfirmed)

ISO 14500:2003

ISO 8462-1:1986

(reconfirmed)

ISO 15228:2005

ISO 8462-2:1986

(reconfirmed)

TC 83

Sports and recreational equipment

ISO 8630-2:1987

(reconfirmed)

ISO 13993:2001

(reconfirmed)

ISO 2132:1972

(reconfirmed)

TC 92

Fire safety

ISO 2133:1976

(reconfirmed)

ISO 3066:1986

(reconfirmed)

ISO 4232-2:1980

(reconfirmed)

ISO 4232-3:1984

(reconfirmed)

ISO 5138-1:1978

(reconfirmed)

ISO 5138-2:1980

(reconfirmed)

ISO 5138-3:1981

(reconfirmed)

ISO 5138-4:1981

(reconfirmed)

ISO 5138-5:1981

(reconfirmed)

ISO 5138-7:1986

(reconfirmed)

ISO 5138-9:1984

(reconfirmed)

ISO/IEC 10561:1999

(reconfirmed)

ISO/IEC 14473:1999

(reconfirmed)

ISO 5925-1:2007

TC 94


ISO 9150:1988

(reconfirmed)

TC 100

Chains and chain sprockets for power transmission and conveyors

ISO 3512:1992

(reconfirmed)

TC 123

Plain bearings

ISO 12301:2007

TC 131

Fluid power systems

ISO 4407:2002

(reconfirmed)

ISO 3601-2:2008 ISO 3601-4:2008 ISO 6194-1:2007 16


ISO/IEC 15404:2000

(reconfirmed)

ISO/IEC 15775:1999

(reconfirmed)

ISO/IEC 9594-10:2008

(replaced by )

ISO/IEC TR 19797:2004 ISO/IEC 19799:2007

Meeting calendar

ISO/IEC 24700:2005 ISO/IEC TR 24705:2005

(update at 01 March 2013)

ISO/IEC 24712:2007

* Information definite but meeting not yet formally convened

ISO/IEC TR 22250-1:2002

** Provisional

April 2013

Standards withdrawn

2-5

Vienna (Austria)

TC 85/SC 2

Nuclear energy, nuclear technologies, and radiological protection/Radiological protection

4

Rotterdam (Netherlands)

TC 67/SC 8

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Arctic operations

8-10

London (United Kingdom)

TC 34/SC 16

Food products/Horizontal methods for molecular biomarker analysis

8-12

Madrid (Spain)

JTC 1/SC 38

Information technology/Distributed application platforms and services (DAPS)

Period from 01 March to 31 March 2013

TC 38

Textiles

ISO 2649:1974

(replaced by )

TC 45


ISO 5945:1989

(replaced by )

ISO 8054:1996

(replaced by )

TC 46


ISO 2788:1986

(replaced by ISO 25964-1:2011, ISO 25964-2:2013)

8-12

PC 271

Compliance programs

ISO 5964:1985

(replaced by ISO 25964-1:2011, ISO 25964-2:2013)

Sydney (Australia)

9

Helsinki (Finland)

TC 117

Fans

TC 59


12

(replaced by )

Gaithersburg (USA)

TC 84

ISO 15686-6:2004

Devices for administration of medicinal products and intravascular catheters

12

Paris (France)

TC 92/SC 1

Fire safety/Fire initiation and growth

15

Peterborough (United Kingdom)

TC 23/SC 2

Tractors and machinery for agriculture and forestry/Common tests

15-16 Stuttgart (Germany)

TC 39/SC 4

Machine tools/Woodworking machines

15-19 Seattle (USA)

TC 204


16-17 Peterborough (United Kingdom)

TC 23/SC 14

Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals

TC 61

Plastics

ISO 3167:2002

(replaced by )

TC 69


ISO 8258:1991

(replaced by ISO 7870-2:2013)

TC 70


ISO 4548-11:1997

(replaced by )

TC 84

Devices for administration of medicinal products and intravascular catheters

ISO 595-1:1986

(replaced by )

ISO 595-2:1987

(replaced by )

TC 108

Mechanical vibration, shock and condition monitoring

ISO 8569:1996

(replaced by )

TC 112

Vacuum technology

ISO 3669:1986

(replaced by )

TC 184


16-17 Frankfurt (Germany)

TC 48

Laboratory equipment

ISO/PAS 16739:2005

(replaced by ISO 16739:2013)

17-18 Paris (France)

TC 17/SC 3

Steel/Steels for structural purposes

TC 204


ISO/TS 26683-1:2012

(replaced by ISO 26683-1:2013)

JTC 1



17

17-18 Xian (China)

TC 67/SC 2

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Pipeline transportation systems

19

Paris (France)

TC 86/SC 8

Refrigeration and airconditioning/Refrigerants and refrigeration lubricants

20

Moscow (Russian Federation)

TC 92/SC 3

Fire safety/Fire threat to people and environment

13

Berlin (Germany)

TC 29/SC 9

Small tools/Tools with cutting edges made of hard cutting materials

13

Guangzhou (China)

TC 68/SC 2

Financial services/ Financial Services, security

13

Guangzhou (China)

TC 68/SC 4

Financial services/ Securities and related financial instruments

13-14 Brussels (Belgium)

TC 122/SC 4

Packaging/Packaging and environment

13-17 Tokyo (Japan)

TC 114

Horology

TC 171

Document management applications

TC 29/SC 2

Small tools/High speed steel cutting tools and their attachments

TC 68/SC 7

Financial services/ Core banking

TC 92/SC 4

Fire safety/Fire safety engineering

13-17 Vienna (Austria)

21-23 Vancouver (Canada)

TC 34/SC 4

Food products/Cereals and pulses

14

Berlin (Germany)

21-26 Mexico (Mexico)

TC 215

Health informatics

22-26 Winchester (United Kingdom)

JTC 1/SC 37

Information technology/ Biometrics

14

Guangzhou (China)

22-26 Berlin (Germany)

TC 108/SC 5

Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems

14

Burr Ridge (USA)

TC 195/SC 1

Building construction machinery and equipment/Machinery and equipment for concrete work

15

Cork

TC 219

Floor coverings

Santa María de Lamas (Portugal)

TC 87

23-24 Dresden (Germany)

15

Tokyo (Japan)

TC 114/SC 6

25-26 Lünen (Germany)

TC 82

Mining

Horology/Precious metal coverings


TC 83/SC 5

Sports and recreational equipment/Ice hockey equipment and facilities

15

Tokyo (Japan)

TC 114/SC 14

Horology/Table and wall clocks

15-16 Tokyo (Japan)

TC 22/SC 1

Road vehicles/Ignition equipment

16

Hangzhou (China)

TC 10/SC 1

Technical product documentation/Basic conventions

16

Hangzhou (China)

TC 10/SC 6

Technical product documentation/Mechanical engineering documentation

16

Berlin (Germany)

TC 29/SC 8

Small tools/Tools for pressing and moulding

16

Guangzhou (China)

TC 68

Financial services


TC 184/SC 5

Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications

17

Hangzhou (China)

TC 10


17

Berlin (Germany)

TC 22/SC 10

Road vehicles/Impact test procedures

17

Berlin (Germany)

TC 22/SC 12

Road vehicles/Passive safety crash protection systems

17

Berlin (Germany)

TC 29

Small tools

17

Burr Ridge (USA)

TC 195


19-24 Shenzen (China)

TC 130

Graphic technology

20-23 Durban (South Africa)

TC 249

Traditional chinese medicine


TC 43/SC 3

Acoustics/Underwater acoustics

20


25-26 New York (USA)

**

TC 178


26

Pavia (Italy)

TC 194

Biological evaluation of medical devices

26

Cape Town (South Africa)

TC 242

Energy Management

TC 24/SC 4

Particle characterization including sieving/Particle characterization

JTC 1/SC 27

Information technology/IT Security techniques

26-27 Clausthal-Zellerfeld (Germany)

29-30 Sophia Antipolis (France)

*

April-May 2013 29-2

Sydney (Australia)

PC 272

Forensic sciences

29-3

Calgary (Canada)

TC 251

Project committee: Asset management

May 2013 2

Calgary (Canada)

TC 23/SC 19

Tractors and machinery for agriculture and forestry/Agricultural electronics

4

Sydney (Australia)

TC 110/SC 4

Industrial trucks/ Rough-terrain trucks

7

Milan (Italy)

TC 138/SC 3

Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for industrial applications

18

*


22

22

Vancouver (Canada)

TC 67/SC 5

Stockholm (Sweden)

22-23 La Valetta (Malta)

TC 145/SC 1

Graphical symbols/ Public information symbols

3-6

Milan (Italy)

TC 22/SC 13

Road vehicles/Ergonomics applicable to road vehicles

3-7

Auburn Hills (USA)

TC 22/SC 21

Road vehicles/Electrically propelled road vehicles

3-7

Rotterdam (Netherlands)

TC 34/SC 5

Food products/Milk and milk products

3-7

McLean, Virginia (USA)

TC 39/SC 2

Machine tools/Test conditions for metal cutting machine tools

3-7

Copenhagen (Denmark)

TC 42

Photography

3-7

Paris (France)

TC 46/SC 11

Information and documentation/Archives/ records management

3-7

Milwaukee (USA)

**

TC 69


*

TC 173/SC 1

Assistive products for persons with disability/Wheelchairs

*

COPOLCO

Committee on consumer policy

Stockholm (Sweden)

TC 145/SC 2

Graphical symbols/ Safety identification, signs, shapes, symbols and colours

Stockholm (Sweden)

TC 145/SC 3

Graphical symbols/ Graphical symbols for use on equipment

TC 20/SC 8

Aircraft and space vehicles/Aerospace terminology

3-7

San Francisco (USA)

Salzburg (Austria)

TC 89

Wood-based panels

3-8

Warsaw (Poland)

TC 96

Cranes

3-8

Paris (France)

TC 184/SC 4

24

Stockholm (Sweden)

TC 145

Graphical symbols

Automation systems and integration/Industrial data

24

Delft (Netherlands)

TC 158

Analysis of gases

4-5

Amsterdam (Netherlands)

TC 259

Project committee: Outsourcing

JTC 1/SC 7

Information technology/Software and systems engineering

5

Berlin (Germany)

TC 29/SC 5

Small tools/Grinding wheels and abrasives

5

TC 115

Pumps

Aircraft and space vehicles/Space systems and operations

Prague (Czech Republic)

**

TC 20/SC 14

5-7

Paris (France)

**

TC 46/SC 4

Information and documentation/Technical interoperability

6

Lysaker (Norway)

TC 8/SC 2

Ships and marine technology/Marine environment protection

TC 22/SC 17

Road vehicles/ Visibility

TC 23/SC 6

Tractors and machinery for agriculture and forestry/Equipment for crop protection

23

23

23-25 Moscow (Russian Federation) 24

*

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Casing, tubing and drill pipe

*

25-31 Montreal (Canada) 27-31 Moscow (Russian Federation)

*


*

TC 133

Clothing sizing systems - size designation, size measurement methods and digital fittings

27-31 Delft (Netherlands)

TC 223

Societal security

6-7

Milan (Italy)

28-31 Helsinki (Finland)

TC 257

General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions

6-7

Paris (France)

29

TC 147/SC 3

Water quality/Radioactivity measurements

30-31 Busan (Korea, Republic of)

TC 211


31

Shanghai (China)

TC 4

Rolling bearings

31

Berlin (Germany)

TC 44/SC 6

Welding and allied processes/Resistance welding and allied mechanical joining

31

Bilbao (Spain)

Porto (Portugal)

TC 228

Tourism and related services

June 2013 3-5

3-5

Berlin (Germany)

Paris (France)

TC 44/SC 3

TC 46/SC 9


Welding and allied processes/Welding consumables Information and documentation/ Identification and description

*

10-13 London (United Kingdom)

*

TC 20/SC 1

Aircraft and space vehicles/ Aerospace electrical requirements

10-14 Tel Aviv (Israel)

*

TC 224

Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

11

Geneva (Switzerland)

*

CSC/SPC

Council/Strategy and Policy Committee (CSC/SPC)

11

Chantilly (USA)

*

TC 220

Cryogenic vessels

11-12 Brugge (Belgium)

TC 17/SC 17

Steel/Steel wire rod and wire products

11-12 Burr Ridge (USA)

TC 23/SC 3

Tractors and machinery for agriculture and forestry/Safety and comfort

TC 22

Road vehicles

11-13 Gothenburg (Sweden)

*

19

11-14 Sydney (Australia) 12

Munich (Germany)

*


12-13 Geneva (Switzerland) 13

13

*

Atlanta (USA)

Committee on reference materials

TC 118/SC 4

Compressors and pneumatic tools, machines and equipment/Compressed air purity specification and compressed air treatment equipment

17-21 Bellevue (USA)

JTC 1/SC 34

Information technology/Document description and processing languages

17-21 Shanghai (China)

TC 121


TC 149

Cycles

18-19 Düsseldorf (Germany)

TC 17/SC 4

Steel/Heat treatable and alloy steels

18-19 Louvain-laNeuve (Belgium)

TC 17/SC 11

Steel/Steel castings

TC 29/SC 10

Small tools/Assembly tools for screws and nuts, pliers and nippers

TC 137

Footwear sizing designations and marking systems

Porto de Galinhas (Brazil)

TC 135/SC 9

Non-destructive testing/Acoustic emission testing

TC 17/SC 12

Steel/Continuous mill flat rolled products


TC 23/SC 4

Tractors and machinery for agriculture and forestry/Tractors

TMB

Technical Management Board

18-19 Courbevoie, Paris (France)

TC 85/SC 5

Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle

18-19 (Spain)

19

**

**

TC 156

Corrosion of metals and alloys


TC 23


19-20 Prague (Czech Republic)

13-14 Barcelona (Spain)

TC 91

Surface active agents


**

TC 22/SC 3

TC 37/SC 1

Terminology and other language and content resources/ Principles and methods

Road vehicles/Electrical and electronic equipment


*

TC 34/SC 9

Food products/ Microbiology

24-26 Calgary (Canada)

*

TC 253

Project committee: Treated wastewater re-use for irrigation

24-27 Istanbul (Turkey)

TC 189

Ceramic tile

24-28 Montreal (Canada)

TC 35


TC 193

Natural gas

24-28 Gaborone (Botswana)

TC 207


25-26 Tokyo (Japan)

TC 17/SC 9

Steel/Tinplate and blackplate

TC 35/SC 14

Paints and varnishes/ Protective paint systems for steel structures

TC 44/SC 10

Welding and allied processes/Unification of requirements in the field of metal welding

TC 35/SC 9

Paints and varnishes/ General test methods for paints and varnishes

27-28 Tokyo (Japan)

TC 67/SC 6

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Processing equipment and systems

28

Stockholm (Sweden)

TC 51

Pallets for unit load method of materials handling

28

Espoo (Helsinki) (Finland)

TC 188

Small craft

14

14

14

Berlin (Germany)

REMCO

Pretoria (South Africa)

*



TC 37/SC 2

*

TC 37/SC 3

Terminology and other language and content resources/ Terminographical and lexicographical working methods Terminology and other language and content resources/ Systems to manage terminology, knowledge and content

14


*

TC 37/SC 4

Terminology and other language and content resources/ Language resource management

14


*

TC 37/SC 5

Terminology and other language and content resources/ Translation, interpreting and related technology

14

Paris (France)

TC 86/SC 6

14-15 Atlanta (USA)

17-19 (Europe)

17-21 Seoul (Korea, Republic of)

20

TC 85/SC 6

**

TC 252

JTC 1/SC 6

Refrigeration and air-conditioning/ Testing and rating of air-conditioners and heat pumps Nuclear energy, nuclear technologies, and radiological protection/Reactor technology Project committee: Natural gas fuelling stations for vehicles

24-28 Moscow (Russian Federation)

26

Montreal (Canada)

*

*


27

Montreal (Canada)

*

Information technology/Telecommunications and information exchange between systems


Washington, D.C (USA)

**

TC 67/SC 3

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Drilling and completion fluids, and well cements

10


*

TC 21/SC 6

Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

10

Paris (France)

*

TC 79/SC 11

Light metals and their alloys/Titanium

Sustainable development in communities


**

TC 146/SC 6

Air quality/Indoor air

TC 21/SC 3

Equipment for fire protection and fire fighting/Fire detection and alarm systems

July 2013 1-5

Bornholm (Denmark)

TC 268

2

Berlin (Germany)

TC 274

Light and lighting

2-4

Bornholm (Denmark)

TC 268/SC 1

Sustainable development in communities/ Smart community infrastructures

**

15-17 Vienna (Austria) 15-19 Paris (France)

Nottingham (United Kingdom)

*

**

PC 273

Customer contact centres

JTC 2

Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology

TC 261

Additive manufacturing

August 2013 12-15 Moscow (Russian Federation)

*

TC 20/SC 10

Equipment for fire protection and fire fighting/Smoke and heat control systems and components

11

Suzhou (China)

*

TC 61/SC 1

Plastics/Terminology

11

Suzhou (China)

*

TC 61/SC 2

Plastics/Mechanical properties

11

Suzhou (China)

*

TC 61/SC 4

Plastics/Burning behaviour

11

Suzhou (China)

*

TC 61/SC 5

Plastics/Physicalchemical properties Plastics/Cellular plastics

11

Suzhou (China)

*

TC 61/SC 11

Plastics/Products

11

Suzhou (China)

*

TC 61/SC 12

Plastics/Thermosetting materials

11

Paris (France)

*

TC 79/SC 5

Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

11-12 Stockholm (Sweden)

*

TC 119/SC 3

Powder metallurgy/ Sampling and testing methods for sintered metal materials (excluding hardmetals)

12


*

TC 21/SC 2

Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

12

Suzhou (China)

*

TC 61/SC 6

Plastics/Ageing, chemical and environmental resistance

12

Suzhou (China)

*

TC 61/SC 9

Plastics/Thermoplastic materials

12

Suzhou (China)

*

TC 61/SC 13

Plastics/Composites and reinforcement fibres

12

Paris (France)

**

TC 79/SC 2

Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

12

Paris (France)

**

TC 79/SC 6

Light metals and their alloys/Wrought aluminium and aluminium alloys

12

Stockholm (Sweden)

*

TC 119/SC 2

Powder metallurgy/ Sampling and testing methods for powders (including powders for hardmetals)

**

JTC 1/SC 35

Information technology/User interfaces

September 2013 3-6

Hangzhou (China)

*

TC 172/SC 5

Optics and photonics/Microscopes and endoscopes

8-9

Victoria (Canada)

*

TC 33

Refractories

8-13


*

JTC 1/SC 36

Information technology/Information technology for learning, education and training

8-13

Suzhou (China)

TC 61

Plastics

9-10


TC 21/SC 8

Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

9-10

Paris (France)

*

TC 26

Copper and copper alloys

9-11

Gaithersburg (USA)

**

TC 172/SC 9

Optics and photonics/Electro-optical systems

9-13

Delft (Netherlands)

*

JTC 1/SC 34

Information technology/Document description and processing languages

Montreal (Canada)

**

Stockholm (Sweden)

*


TC 21/SC 11

TC 61/SC 10

26-30 (Canada)

TC 163

*

*

Fertilizers and soil conditioners

9-14


Suzhou (China)

TC 134

TC 108/SC 4

11

11

**

9-13


Aircraft and space vehicles/Aerospace fluid systems and components

21-23 (USA)

*

11

Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock Thermal performance and energy use in the built environment

21

12

Stockholm (Sweden)

*

TC 119/SC 4

Powder metallurgy/ Sampling and testing methods for hardmetals

13


*

TC 21

Equipment for fire protection and fire fighting

13

Paris (France)

**

TC 79

Light metals and their alloys

13

Stockholm (Sweden)

TC 119

Powder metallurgy

13

Stockholm (Sweden)

*

TC 119/SC 5

Powder metallurgy/ Specifications for powder metallurgical materials (excluding hardmetals)

Frankfurt (Germany)

**

13

15-20 Velsen (Netherlands) 16-17 St. Petersburg (Russian Federation)

*

16-17 St. Petersburg (Russian Federation)

*

16-20 Copenhagen (Denmark)

*

TC 244

Industrial furnaces and associated processing equipment

TC 164


DEVCO

Committee on developing countries matters

TMB

TC 67/SC 7

Technical Management Board

*

TC 150


16-20 Fukuoka (Japan)

*

TC 190

Soil quality


*

TC 190/SC 1

Soil quality/Evaluation of criteria, terminology and codification


*

TC 190/SC 2

Soil quality/Sampling


*

TC 190/SC 3

Soil quality/Chemical methods and soil characteristics


*

TC 190/SC 4

Soil quality/Biological methods


*

TC 190/SC 7

Soil quality/Soil and site assessment

Paris (France)

*

TC 254

Safety of amusement rides and amusement devices

17-18 Belo Horizonte (Brazil)

**

TC 155


17-19 Tokyo (Japan)

*

JTC 1/SC 22

Information technology/Programming languages, their environments and system software interfaces

17-19 Chengdu (China)

*

TC 256

Pigments, dyestuffs and extenders

18-20 St. Petersburg (Russian Federation)

*

GA

General Assembly

19

Atlanta (USA)

*

TC 142


19-20 Graz (Austria)

*

TC 172/SC 6

Optics and photonics/ Geodetic and surveying instruments

22

*

COUNCIL

Council

23-26 (Canada)

**

TC 153/SC 1

Valves/Design, manufacture, marking and testing

23-27 Kobe (Japan)

*

JTC 1/SC 38

Information technology/Distributed application platforms and services (DAPS)

23-27 Milan (Italy)

**

TC 120

Leather


*

TC 218

Timber

25-26 Oslo (Norway)

*

TC 67


26-27 Toulouse (France)

*

TC 264

Fireworks

27

Seoul (Korea, Republic of)

**

TC 44/SC 12

Welding and allied processes/Soldering materials

27

(Canada)

**

TC 153/SC 1

Valves/Design, manufacture, marking and testing

27

Helsinki (Finland)

*

TC 213


St. Petersburg (Russian Federation)

**

CSC/FIN

Council/Council Standing Committee on Finance (CSC/FIN)


**

TC 21/SC 5

Equipment for fire protection and fire fighting/Fixed firefighting systems using water

13

Paris (France)

**

TC 79/SC 4

Light metals and their alloys/Unalloyed (refined) aluminium ingots

13

Paris (France)

**

TC 79/SC 7

Light metals and their alloys/Aluminium and cast aluminium alloys

13

Paris (France)

**

TC 79/SC 9

Light metals and their alloys/Symbolization

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Offshore structures


17

21

St. Petersburg (Russian Federation)

(Germany)

**

TC 180

Solar energy

Tokyo (Japan)

**

TC 267

Facilities management

JTC 1/SC 25

Information technology/Interconnection of information technology equipment

TC 23/SC 15

Tractors and machinery for agriculture and forestry/Machinery for forestry

September-October 2013 30-4

(Sweden)

**

October 2013 2-3

Tampere (Finland)

3-4

Chantilly (USA)

*

TC 58/SC 2

Gas cylinders/Cylinder fittings

7

Istanbul (Turkey)

*

TC 38/SC 1

Textiles/Tests for coloured textiles and colorants

7-8

Milan (Italy)

**

TC 44/SC 8

Welding and allied processes/Equipment for gas welding, cutting and allied processes


7-9

Tokyo (Japan)

*

TC 70


7-9

Tokyo (Japan)

*

TC 70/SC 8

Internal combustion engines/Exhaust gas emission measurement

7-9

Istanbul (Turkey)

**

TC 126

Tobacco and tobacco products

7-11

Beijing (China)

*

CASCO

Committee on conformity assessment

7-11

Istanbul (Turkey)

*

TC 38

Textiles

7-11

Oslo (Norway)

*

TC 138


18

Berlin (Germany)

*

TC 22/SC 7

Road vehicles/Injection equipment and filters for use on road vehicles

21-25 (Europe)

*

TC 39/SC 2

Machine tools/Test conditions for metal cutting machine tools

21-25 Sao Paulo (Brazil)

*

TC 181

Safety of toys

21-25 Sydney (Australia)

*

TC 215

Health informatics


*

TC 147

Water quality

22-25 Tokyo (Japan)

*

TC 146/SC 1

Air quality/Stationary source emissions

23

Paris (France)

*

TC 17/SC 16

Steel/Steels for the reinforcement and prestressing of concrete

23

Tokyo (Japan)

**

TC 206

Fine ceramics

**

TC 34/SC 12

Food products/Sensory analysis

TC 173


8

Istanbul (Turkey)

*

TC 38/SC 2

Textiles/Cleansing, finishing and water resistance tests

9


*

TC 8/SC 7

Ships and marine technology/Inland navigation vessels

9

Istanbul (Turkey)

*

TC 38/SC 23

Textiles/Fibres and yarns

24-25 Sarajevo (Bosnia and Herzegovina)

9-10

Seogwipo-si (Korea, Republic of)

**

TC 159

Ergonomics


10

Istanbul (Turkey)

*

TC 38/SC 24

Textiles/Conditioning atmospheres and physical tests for textile fabrics

11

Garching (Germany)

**

TC 60

Gears

11

Garching (Germany)

**

TC 60/SC 1

Gears/Nomenclature and wormgearing

11

Garching (Germany)

**

TC 60/SC 2

Gears/Gear capacity calculation

**

TC 44/SC 3

Welding and allied processes/Welding consumables

TC 165

Timber structures

14-15 Miami (USA)

14-17 Stuttgart (Germany) 14-18 Paris (France)

*

TC 2

Fasteners

14-18 Seoul (Korea, Republic of)

*

TC 108

Mechanical vibration, shock and condition monitoring

16-18 Munich (Germany)

*

TC 58/SC 3

Gas cylinders/Cylinder design

16-18 (Korea, Republic of)

**

TC 123

Plain bearings


**

TC 123/SC 2

Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions


**

TC 123/SC 3

Plain bearings/Dimensions, tolerances and construction details


**

TC 123/SC 5

Plain bearings/ Quality analysis and assurance


**

TC 123/SC 6

Plain bearings/Terms and common items


**

TC 123/SC 7

Plain bearings/Special types of plain bearings

17-18 (South Africa)

**

TC 44



28-31 Bali (Indonesia)

*

TC 45/SC 1

Rubber and rubber products/Hoses (rubber and plastics)

31

Bali (Indonesia)

*

TC 45/SC 2

Rubber and rubber products/Testing and analysis

31

Bali (Indonesia)

TC 45/SC 4

Rubber and rubber products/Products (other than hoses)

Berlin (Germany)

**

TC 34/SC 15

Food products/Coffee

(South Africa)

**

TC 44/SC 9

Welding and allied processes/Health and safety

(France)

**

TC 111

Round steel link chains, chain slings, components and accessories

(France)

**

TC 111/SC 1

Round steel link chains, chain slings, components and accessories/Chains and chain slings

Berlin (Germany)

**

TC 172/SC 7

Optics and photonics/Ophthalmic optics and instruments

Beijing (China)

**

TC 184/SC 2

Automation systems and integration/ Robots and robotic devices

Boulder (USA)

**

TC 202

Microbeam analysis

Carson City (USA)

**

TC 209

Cleanrooms and associated controlled environments

TC 138/SC 1

Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for soil, waste and drainage (including land drainage)

TC 45


October-December 2013 7-11

Oslo (Norway)

*

October-November 2013 28-1

Bali (Indonesia)

23

November 2013 1

Bali (Indonesia)

*

TC 45/SC 3

Rubber and rubber products/Raw materials (including latex) for use in the rubber industry

4-8

Sydney (Australia)

*

TC 34/SC 17

Food products/Management systems for food safety

4-8

Shenzen (China)

*

TC 160

Glass in building

4-9

Perros-Guirec (France)

**

JTC 1


6-9


*

TC 227

Springs

7-9

Okinawa (Japan)

**

TC 201

Surface chemical analysis

8

Paris (France)

*

TC 92/SC 1

Fire safety/Fire initiation and growth

10-15 Mexico (Mexico)

*

TC 113

Hydrometry

11-15 Tokyo (Japan)

*

TC 98

Bases for design of structures

13

Tokyo (Japan)

**

TC 110/SC 1

Industrial trucks/General terminology

14

Tokyo (Japan)

**

TC 110/SC 2

Industrial trucks/ Safety of powered industrial trucks

14-15 Redlands (USA)

*

TC 211


15

**

TC 110

Industrial trucks

19-21 Singapore (Singapore)

*

TC 212

Clinical laboratory testing and in vitro diagnostic test systems

20-22 Tokyo (Japan)

*

TC 269

Railway applications

30

Berlin (Germany)

**

TC 44/SC 6

Welding and allied processes/Resistance welding and allied mechanical joining

Berlin (Germany)

**

TC 41


New Delhi (India)

**

TC 23/SC 18

Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

(Europe)

**

TC 24/SC 4



**

TC 59/SC 2

Buildings and civil engineering works/ Terminology and harmonization of languages

Tokyo (Japan)

Bratislava (Slovakia)

**

TC 44/SC 11

Welding and allied processes/Qualification requirements for welding and allied processes personnel

(Unknown)

**

TC 173/SC 2

Assistive products for persons with disability/Classification and terminology

(Sweden)

**

TC 205

Building environment design

**

TC 58/SC 4

Gas cylinders/Operational requirements for gas cylinders

(South America)

**

JTC 1/SC 35

Information technology/User interfaces

Delft (Netherlands)

**

TC 6/SC 2

Paper, board and pulps/Test methods and quality specifications for paper and board

(Sweden)

**

TC 213


February 2014 10-14 Paris (France)

March 2014 13


*

TC 118/SC 1

Compressors and pneumatic tools, machines and equipment/Process compressors

13


*

TC 118/SC 3

Compressors and pneumatic tools, machines and equipment/Pneumatic tools and machines

13


*

TC 118/SC 4

Compressors and pneumatic tools, machines and equipment/Compressed air purity specification and compressed air treatment equipment

13


*

TC 118/SC 6

Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems

14


TC 118

Compressors and pneumatic tools, machines and equipment

4th Quarter 2013

(Korea, Republic of)

**

TC 106

Dentistry

Paris (France)

**

TC 275

Sludge recovery, recycling, treatment and disposal

(South Africa)

**

TC 27

Solid mineral fuels

(Unknown)

**

TC 38/SC 1

Textiles/Tests for coloured textiles and colorants

Month unknown 2013

24

23-27 Warsaw (Poland)

*

TC 107

Metallic and other inorganic coatings


*

TC 107/SC 3

Metallic and other inorganic coatings/ Electrodeposited coatings and related finishes


*

TC 107/SC 4

Metallic and other inorganic coatings/ Hot dip coatings (galvanized, etc.)


*

TC 107/SC 7

Metallic and other inorganic coatings/ Corrosion tests


*

TC 107/SC 8

Metallic and other inorganic coatings/ Chemical conversion coatings


27-28 Geneva (Switzerland)

*

COUNCIL

Council

(South Africa)

April 2014 7-11

Bologna (Italy)

*

TC 110/SC 4

Industrial trucks/ Rough-terrain trucks

8-9

(Japan)

**

TC 199

Safety of machinery

*

JTC 1/SC 27

Information technology/IT Security techniques

**

TC 34/SC 2

Food products/Oleaginous seeds and fruits and oilseed meals

14-15 Hong Kong (Hong Kong, China) Berlin (Germany)

Berlin (Germany)

(Brazil)

4th Quarter 2014

**

TC 34/SC 11

Food products/ Animal and vegetable fats and oils

**

TC 146

Air quality

(USA)

**

REMCO


(Australia)

**

TC 17/SC 1

Steel/Methods of determination of chemical composition

(Brazil)

**

TC 28

Petroleum products and lubricants

Beijing (China)

**

TC 36

Cinematography

(Germany)

**

TC 37

Terminology and other language and content resources

(Japan)

**

TC 44


(United Kingdom)

**

TC 142


Suzhou (China)

**

TC 164


(Germany)

**

TC 190

Soil quality

**

TC 213


Foshan (China)

**

TC 107

Metallic and other inorganic coatings

Foshan (China)

**

TC 107/SC 3

Metallic and other inorganic coatings/ Electrodeposited coatings and related finishes

Month unknown 2014

**

TC 102

Iron ore and direct reduced iron


**

TC 10



**

TC 68/SC 4

Financial services/ Securities and related financial instruments

15

*

TC 68

Financial services


**

TC 43

Acoustics


**

TC 43/SC 1

Acoustics/Noise

19-24 Karuizawa (Japan)

**

TC 215

Health informatics

Beijing (China)

**

TC 24/SC 4



**

TC 46/SC 11

Information and documentation/Archives/ records management

Foshan (China)

**

TC 107/SC 4

Metallic and other inorganic coatings/ Hot dip coatings (galvanized, etc.)

May 2014 9-16


February 2015 London (United Kingdom)

1st Quarter 2015

June 2014 1-6

(Sweden)

**

TC 127

Earth-moving machinery

Foshan (China)

**

TC 107/SC 7

5-6

Berlin (Germany)

*

TC 211


Metallic and other inorganic coatings/ Corrosion tests

Foshan (China)

**

TC 107/SC 8

Metallic and other inorganic coatings/ Chemical conversion coatings

**

TC 215

Health informatics

**

TC 172/SC 7

Optics and photonics/Ophthalmic optics and instruments

**

TC 215

Health informatics

**

JTC 1


September 2014 8-9

Madrid (Spain)

*

JTC 1/SC 22

Information technology/Programming languages, their environments and system software interfaces

10-12 Rio de Janeiro (Brazil)

*

GA

General Assembly

13

Rio de Janeiro (Brazil)

*

COUNCIL

Council

(South Africa)

**

TC 178


Montreal (Canada)

**

TC 213


October 2014 5-10

April 2015 (Europe)

2nd Quarter 2015 (China)

3rd Quarter 2015 Sao Paulo (Brazil)

November 2015 (China)

Month unknown 2015

Berlin (Germany)

**

TC 215

Health informatics

(South Africa)

**

REMCO

Prague (Czech Republic)

**

TC 135

Non-destructive testing


(Finland)

**

TC 44


(France)

**

TC 45


November 2014 3-7

Cape Town (South Africa)

**

TC 45



25

(Japan)

**

TC 142


(China)

**

TC 155


(United Kingdom)

**

TC 164


(Austria)

**

TC 190

Soil quality

**

JTC 1


(Russian Federation)

**

REMCO


(Australia)

**

TC 44


November 2016 (Norway)

Month unknown 2016

26
