John Smith

Dr. Wissam Kadhim Al-Sarrajii University of Technology ,Baghdad,Iraq [email protected], [email protected] Objective: Lecturer, Production Engineer Education: PhD, Production Engineering, University of Technology 2009 Dissertation: Feasibility Development of ISMF Process Using CNC Milling Machine MSc., Production Engineering, University of Technology 2001 Thesis: Three Axis Interpolation and Emulation for CNC Milling Machines BSc., Production Engineering, University of Technology 1998 Project: Computer Aided Blanking Die Design

Concentrations: CAD/CAM, CNC Machines , CAGD, Free-Form Surface Generation and Machining, Non-Conventional sheet Metal Forming, Virtual Prototype. Teaching Experience: •

•

•

•

•

Oct. 2001 to June 2002 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Numerical Control. Oct. 2001 to June 2002 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Manufacturing Processing. Oct. 2002 to June 2003 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Design of Machine Elements І. Oct. 2002 to June 2003 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Measurements and Instrumentation. Oct. 2003 to June 2004 Lecturer, School of Production Engineering and Metallurgy, University of Technology

1

Course: Die Design (Tutorial). • Oct. 2004 to June 2005 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Computer Applications. • Oct. 2005 to June 2006 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Design of Machine Elements І (Tutorial). • Oct. 2009 to June 1020 Lecturer, School of Production Engineering and Metallurgy, University of Technology Course: Numerical Control. • Oct. 2009 up to now Lecturer, School of Production Engineering and Metallurgy, University of Technology

Course: CAD/CAM. Research Skills: Extensive knowledge of CNC Machines, CAD/CAM, CAGD, Surface Generation, Engineering Statistics, Modeling and Optimization . Published Papers:

1.

Wissam K.H. (2007). NC Roughing Machining of Cavities Defining by Surface of Revolution Approach. Journal of Technology and Engineering,Vol.25,No.1.

2. Wissam K.H., Husam Lefta, Baraa,M. Hussain (2006). Incremental versus best line curve approximation approaches applied to the generation of CNC tool path. Technical Journal, Vol.19, No.2.

3. Wissam K.H., Husam Lefta, Baraa,M. Hussain (2005). An integrated approach to design and manufacturing of unprotected type flange coupling using FEM. Technical Journal, Vol.15, No.2.

4. Wissam K.H., Husam Lefta, Bushra B. (2008). Design of free form

2

closed curved using Four Point Interpolation approach. Journal of Technology and Engineering. Vol.26,No.6.

5. Wissam K.H. (2009). Controlling the Working Area in Flexible Sheet Forming dies. The Iraqi Jou. For Mech. & Mat. Eng. (Acc. 2010).

6. Wissam K.H. (2010). Inverse Kinematics-Based Trajectory Generator

For Robot-Assisted 3D Surface Machining.Journal of Technology and Engineering (Acc.2010).

7. Wissam K.H. (2010). Blank Shape Prediction Based on Flattening Approach of 3D Complex Surfaces Produced by Digitized Dies. The Iraqi Jou. For Mech. & Mat. Eng. (Acc. 2010).

8. Wissam K.H. (2010). A New Method for Three Dimensional Cubic

Bezier Surfaces Reconstruction Based on Matching the Surface Framework. Journal of Technology and Engineering (Acc.2010).

9. Wissam K.H. Sarraji a, Jamal H. Mohamed a and Wei-Xin Ren, (2010) An

Experimental Investigation of Some Relevant Process Parameters Affecting Formed Thickness in ISMF Process. Journal of Technology and Engineering (Acc.2010).

Skills and Qualifications: U

• • • • • • • •

CNC Machining , Rapid Prototyping, Surface Reconstruction Sculptured Surface Generation and Manipulation

Microsoft Office, Internet Programming ability in MATLAB Software Programming ability in IronCAD Software Programming ability in UG-NX CAD/CAM Software Programming ability in AutoCAD Software Programming ability in Visual Basic

3