JORDAHL Price list 2013

CONNECTION SYSTEMS

SHEAR REINFORCEMENT SYSTEMS

SHEAR CONNECTOR SYSTEMS

FACADE CONNECTION SYSTEMS

MOUNTING TECHNOLOGY

Our 2013 Price List. A whole host of good reasons to choose quality and customer focus. Valid from February 2013

anchored in quality

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Quality since 1907.

JORDAHL‘s registered office and administrative headquarters in the premises of its affiliate PUK

JORDAHL – The Company JORDAHL connects: concrete, steel, heavy loads and a whole lot more. And of course numerous customers around the world who have already decided for highquality and individual products from fastening, reinforcement and shear connection, mounting technology and facade connection systems. Customers who choose JORDAHL want more – higher quality, broader choice, better technical advice, wider experience. And they get all of this from us.

Since our company was founded in Berlin in 1907 we have been at the forefront of connection and shear reinforcement systems development. JORDAHL products such as anchor channels have become milestones in the evolution of structural engineering and have brought lasting changes to construction, shaping the way buildings are designed and making them safer, not just in Germany.

The JORDAHL Seal JORDAHL has over 100 years of unique experience in the market. And this experience forms the basis for our competence and high standards. Whether high-quality products, service or consulting – we aim to do everything for our customers to the same demanding standard of excellence. That is what the JORDAHL seal stands for. It is a guarantee of quality for our customers and also the standard that we strive to adhere to each and every day.

The sign of excellent JORDAHL® Quality.

100 YEARS OF ANCHOR CHANNELS 100 YEARS OF QUALITY

The JORDAHL Cover Picture JORDAHL products make so much possible. Including the new headquarters of the church-related Evangelisches Werk für Diakonie und Entwicklung. The building is located on the corner of Caroline-Michaelis-Strasse and Invalidenstrasse in the Berlin-Mitte district and offers space for up to 700 employees, conference rooms, prayer rooms, a cafeteria and shops. The building was designed by architects KSP Jürgen Engel in accordance with the DGNB principles for sustainable construction. The annual primary energy requirement will be reduced to under 70 kilowatt hours per square metre thanks to energy-efficient operations. This aim is naturally supported by reliable, high-quality JORDAHL® JTA W and JTA K anchor channels.

2

New headquarters of the Evangelisches Werk für Diakonie und Entwicklung, Berlin

© JORDAHL | Price List 2013 | 01-2013 | www.jordahl.de

Contents Connection Systems

Facade Connection Systems

JORDAHL® Anchor Channels Anchor Channels JTA Toothed Anchor Channels JXA Toothed Anchor Channels JXA-PC Toothed Anchor Channels JZA Loop Channels JSA Pricing Profiled Metal Sheet Channels JTB Railing Fastening JGB Brackets JK Edge Protection Angle JKW Curved Channels JTA / JXA/JM/JXM

JORDAHL® Brickwork Support Systems Brickwork Support Brackets JVA+ 34 – 36 Angled Bracket JW 34 Suspension Loop JRH 35 Stainless Steel Wire ESD 35 Prefabricated Part Holder JFT 36 Angled Support Brackets L-DF+, L-DN+ and L-F+ 36 Threaded Loops JGS 36 Grout-in Brackets JMK+ 37 Accessories 37 – 38 Attic Brick Anchors JAV 37 Scaffold Anchor JGA 38 Cavity Wall Ties 39

JORDAHL® Bolts & Accessories Bolts Locking Plates JGM, JAM Accessories Toothed Straps JVB End Anchor Type JE Clamping Plates KP-A, KP, SKU Frame Shoes JG Brick Ties

4–7 8 9 10 10 11 12 13 14 14 15

16 – 21 22 22 – 24 25 25 26 27 28 – 29

Shear Reinforcement Systems JORDAHL® Studrails JDA JORDAHL® Shear reinforcement JDA-S

30 – 31 30 – 31

Shear Connector Systems JORDAHL® Double Shear Connectors JDSD, JDSDQ Fire Protection Collar JBRM, JBRMQ

32 – 33 32 – 33

All rights reserved. Source cover picture: HOCHTIEF Projektentwicklung GmbH; Photo by: Markus Bachmann We reserve the right to make revisions within the framework of product and application related development.


Mounting Technology JORDAHL® Mounting Channels Mounting Channels JM W Toothed Mounting Channels JXM W Framing Channels JM K Toothed Mounting Channels JZM K Slotted Back Channels JML K Toothed Slotted Back Channels JZML K

40 40 41 – 42 42 43 43

Service

44

Advice

45

Terms of Delivery and Payment

46

Index

47

Subject to printing errors or mistakes. JORDAHL GmbH Nobelstr. 51 12057 Berlin, Germany www.jordahl.de

3

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Anchor Channels JTA ETA (European Technical Approval ETA 09/0338) ABZ (General Technical Approval Z-21.4-151) Profile

JTA W 72/48

Associated Bolts

JTA W 74/48

JA M 20–M 30

JTA K 72/48

JTA W 55/42 JTA W 54/43

JA M 20–M 30

JB M 10–M 20, JE M 241)

Round Anchor

195

195

190

I-Anchor

6

5

5 33

48

48

15.5

10

150 200 250 300 350 400 550 800 1050 3000 6000 Price per Metre/lfd. m Weight [kg/m]

Number of Anchors ETA 2 2 2 2 2 3 3 4 5 11 21

3,5/m 4/m 9.80 9.85

Standard Fixed Length Surcharge 1)

■ ■ ■ ■ ■

■

4

ABZ 2 2 2 2 3 3 3 4 5 13 25

55

72

€/Piece Material hdg A4 28.20 115.10 31.25 137.90 34.50 160.65 37.95 183.75 48.90 216.45 52.20 239.00 65.00 307.05 90.90 431.60 116.65 555.25 331.15 1463.90 630.30 2787.90


42

12.9

72

Channel Length [mm]

26

33

ABZ 2 2 2 2 3 3 3 4 5 13 25



ABZ 2 2 2 2 3 3 3 4 5 13 25

€/Piece Material hdg 20.85 23.85 26.45 29.45 37.35 40.20 48.65 67.75 87.05 250.75 477.90

105.05

464.65 3.5/m 4/m 9.05 9.15

100.10

343.45 3.5/m 4/m 7.70 7.90

79.65

[10%]

[10%]

[10%]

[10%]

[10%]

JE M 24 is equivalent to JB M 24.

All prices incl. foamfilling and nailholes Stock length = 6,000 mm (-0/+50 mm) Anchor distance 25–35 mm Fixed length: 1,050 mm < L < 6,000 mm Calculation example for standard and special fixed length: see page 11. Special fixed length: 20 % special fixed length surcharge (increased production costs).

Anchor Type: Round anchor = standard version ■ I-anchor = delivery subject to confirmation except for W 72/48 (74/48) and W 53/34; I-anchor standard version ■ Weight per metre for mill finish version (for galvanized profiles: weigth per metre; +10 %) (average anchor weight) ■


100 YEARS OF ANCHOR CHANNELS 100 YEARS OF QUALITY

Profile

JTA W 53/34

JTA K 53/34

JTA W 50/30

Associated Bolts

JB M 10–M 20

JB M 10–M 20

JB M 10–M 20

Round Anchor

I-Anchor

165

165

100 4.5

4

22 10.5

Channel Length [mm] 150 200 250 300 350 400 550 800 1050 3000 6000 Price per Metre/lfd. m Weight [kg/m] Standard Fixed Length Surcharge

ABZ 2 2 2 2 3 3 3 4 5 13 25

4/m 5.60

€/Piece Material hdg A4 17.95 57.30 20.25 69.80 22.70 82.15 24.95 94.40 31.50 112.90 33.95 125.45 42.00 162.00 58.65 229.85 75.30 298.05 210.30 872.80 401.10 1662.30 66.85 [10%]

277.05

4/m 5.10

[10%]

Material and design ■ hdg = hot-dip galvanized 1.0038/1.0044 ■ A4 = stainless steel 1.4401/1.4404/1.4571 ■ W = hot rolled ■ K = cold formed


ABZ 2 2 2 2 3 3 3 4 5 13 25

30

22 7.9

53


34

22

8

53


34

2.75

50



186.40

ABZ 2 2 2 2 3 3 3 4 5 13 25

4/m 3.45

[10%]

€/Piece Material hdg A4 12.50 40.45 14.00 50.05 15.65 59.95 17.25 69.35 21.50 83.15 23.05 92.50 27.50 120.75 38.40 172.60 48.80 224.60 127.40 639.65 242.40 1218.30 40.40

203.05

[10%]

[10%]

Ordering Example Anchor Channels Short Piece Type

ProfileSize

Channel Anchor Material ETALength Compliant

ETA

JTA

W 50/30 – 250

ABZ

JTA

W 50/30 – 250

–

2A – hdg

–

CE

– hdg

5

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Anchor Channels JTA ETA (European Technical Approval ETA 09/0338) ABZ (General Technical Approval Z-21.4-151) Profile

JTA K 50/30

JTA W 40/22 1 )

JTA K 40/25 1 )

Associated Bolts

JB M 10–M 20

JC M 10–M 16

JC M 10–M 16

Round Anchor

I-Anchor 3.0

Channel Length [mm] 150 200 250 300 350 400 550 800 1050 3000 6000

Price per Metre/lfd. m Weight [kg/m] Standard Fixed Length Surcharge

ETA 2 2 2 2 3 3 3 4 5 13 25

30

18

ABZ 2 2 2 2 3 3 3 4 5 13 25

4/m 3.25

22

18 40

40


33.30

131.05

[10%]

[10%]


25

5.5

6

50

Number of Anchors

2.75

2.4

22

7.4

90

90

100

ABZ 2 2 2 2 3 3 3 4 5 13 25

4/m 2.30


29.55

136.60

[10%]

[10%]


ABZ 2 2 2 2 3 3 3 4 5 13 25

4/m 2.25


25.15

99.00

[10%]

[10%]

1)

Hot-dip galvanized version also available with anchor height of approx. 30 mm (without General Technical Approval and European Technical Approval). Prices on request. 2) Profile in stainless steel A2, anchor in A4, on request (not part of General Technical Approval and European Technical Approval).

■ ■ ■ ■ ■

■

6


Anchor Type: Round anchor = standard version ■ I-anchor = delivery subject to confirmation ■ Weight per metre for mill finish version (for galvanized profiles: weigth per metre +10 %) (average anchor weight) ■


Profile

JTA K 38/17 1 ) 2)

JTA K 28/15 2)

Associated Bolts

JH M 10–M 16

JD M 6–M 12

Round Anchor

I-Anchor 80 3 18

12

17

38

Channel Length [mm]

Number of Anchors

100 150 200 250 300 300 350 400 550 550 800 800 1050 1050 3000 6000

ETA 2 2 2 2 – 3 3 3 – 4 – 5 – 6 16 31

ABZ 2 2 2 2 2 – 3 3 3 – 4 – 5 – 13 25

Price per Metre/lfd. m Weight [kg/m]

5/m 2.05

4/m 2

Standard Fixed Length Surcharge

50

2.3

28

€/Piece Material hdg A4 6.55 19.05 7.25 22.45 7.90 24.85 8.80 27.70 9.85 30.65 13.20 34.80 14.00 37.90 14.75 41.20 16.60 53.10 18.95 57.10 22.45 74.70 25.45 79.65 28.20 96.30 31.20 101.35 67.75 273.95 129.00 522.00 21.50 [10%]



15

87.00

Number of Anchors ETA 2 2 2 2 – 3 3 3 – 4 – 5 – 6 16 31

ABZ 2 2 2 2 2 – 3 3 3 – 4 – 5 – 13 25

4/m 1.2

4/m 1.15

[10%]

€/Piece Material hdg A4 5.45 15.70 6.00 17.70 6.50 19.05 7.05 21.10 7.60 22.80 10.90 26.30 11.65 28.35 12.35 30.45 13.30 37.10 16.15 40.80 17.95 51.90 20.60 55.90 22.35 67.10 24.80 71.10 50.80 183.00 96.60 348.30 16.10

58.05

[10%]

[10%]

Ordering Example Anchor Channels Short Piece Type

ProfileSize

Channel Anchor Material ETALength Compliant

ETA

JTA

K 38/17 – 300

ABZ

JTA

K 38/17 – 300

–

3A – hdg

–

CE

– hdg

7

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Toothed Channels JXA (General Technical Approval Z-21.4-1690) Profile

JXA W 64/44

JXA W 53/34

JXA W 38/23

JXA W 29/20

Associated Bolts

JXE M 20–M 24

JXB M 16–M 20

JXH M 12–M 16, JH M 10–M 16

JXD M 12, JD M 6–M 12

Round Anchor 165

190 5

100

I-Anchor

4

3

44 26 10

7.5

150 200 250 300 350 400 550 800 1050 3000 6000

2 2 2 2 3 3 3 4 5 13 25

Price per Metre/lfd.m Weight kg/m Standard Fixed Length Surcharge

4/m 8.30

■ ■ ■ ■ ■

■

8

Number of Anchors

18


A4

Prices on request

218.30

p. o. r.

[10%]

[10%]


Number of Anchors 2 2 2 2 3 3 3 4 5 13 25 4/m 5.50

Material hdg A4 27.25 111.20 30.20 133.25 33.35 155.20 36.65 177.55 47.25 209.15 50.45 230.90 62.80 296.65 80.10 417.00 112.70 536.45 319.95 1414.40 609.00 2693.70 101.50

448.95

[10%]

[10%]


29


20

5

38

€/Piece

14

23

5.5

53

64

Channel Length [mm]

34

22

80

2.5

196.20


[10%]

€/Piece Material hdg 9.10 10.00 11.05 12.05 15.45 16.35 19.20 26.50 33.70 89.90 171.30 28.55 [10%]

Anchor Type: Round anchor = standard version ■ I-anchor = delivery subject to confirmation ■ Weight per metre for mill finish version ■ (for galvanized profiles: weigth per metre +10 %) (average anchor weight) ■


JXA - PC Profil

JXA - PC W 64/44

JXA - PC W 53/34

JXA - PC W 38/23

JXA - PC W 29/20

Associated Bolts

JXE M 20–M 24

JXB M 16–M 20

JXH M 12–M 16, JH M 10–M 16

JXD M 12, JD M 6–M 12

Round Anchor

200

180 165

170 5 4 3 44 26

22

10

7.5

Channel Length [mm]

Number of Anchors

150 200 250 300 350 400 550 800 1050 3000 6000

2 2 2 2 3 3 3 4 5 13 25

Price per Metre/lfd.m Weight kg/m Standard Fixed Length Surcharge

4/m 8.76


A4

Prices on request

256.15

p. o. r.

[10%]

[10%]



18

5.5

53

64

2.5

34


A4

Prices on request

143.45

p. o. r.

[10%]

[10%]

4/m 3.51

14 5

38

Number of Anchors 2 2 2 2 3 3 3 4 5 13 25

23

€/Piece

Number of Anchors

Material hdg 66.45 69.35 71.60 76.05 100.20 103.00 111.45 136.85 172.45 361.95 631.50

A4

2 2 2 3 3 3 4 5 6 16 31

Prices on request

105.25

p. o. r.

[10%]

[10%]

20

29


5/m 2.46

99.90 [10%]

Ordering Example for Anchor Channels JXA Type

Profile Size

JXA W

38/23

Channel Length –

6.000

Material –

hdg

Ordering Example for Anchor Channels JXA - PC


Type

Profile Size

JXA - PC

W 38/23

Channel Length –

6.000

Material –

hdg

9


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY

Toothed Channels JZA (General Technical Approval Z-21.4-741) Profile

JZA K 41/22 1 )

Associated Bolts

JZS M 12–M 16

JSA (without General Technical Approval) Profile

JSA K 38/17

JSA K 28/15

Associated Bolts

JH M 10–M 16

JD M 6–M 12

Strap Type

2 × 20 × 400

1,5 × 15 × 320

3

2,3

18

I-Anchor

22

22

7.5 41

Channel Length [mm] 100 150 200 250 300 350 400 550 800 1050 3000 6000

2 2 2 2 2 3 3 3 4 5 13 25

Price per Metre/lfd.m Weight kg /m

4/m 2.30

Standard Fixed Length Surcharge 1)

€/Piece

€/Piece

€/Piece

Material

Material

Fixed Length Surcharge

incl. Strap 17.45 2.30

without Strap 13.30

[10%]

hdg incl. Strap 11.45 1.35

without Strap 10.00

[10%]

Material hdg 8.85 10.35 11.30 12.10 13.25 16.40 17.45 20.75 29.45 36.10 94.70 180.90

A4 25.60 29.90 34.40 38.65 42.80 53.55 57.95 70.30 97.15 126.30 343.35 655.50

30.15

109.25

[10%]

[10%]

Hot-dip galvanized version also available with anchor height of approx. 30 mm (without General Technical Approval and European Technical Approval). Prices on request.

Ordering Example Anchor Channels JZA

10

€/Meter Weight kg/m

15

28

hdg

2.5

Number of Anchors

12

38

Round Anchor

90

17

Type

Profile Size

JZA

K 41/22

Channel Length –

6,000

Material –

hdg



Anchor Channel Pricing ■

Prices quoted in this list are gross prices.

Calculating prices Material: mill finish/galvanized

+ –

gross price surcharge for increased cost of steel Discount Final net price

Material: Stainless Steel A2 or A4

+ –

gross price Surcharge for increased cost of steel alloy surcharge Discount

=

Final net price

+

Length less than 1,050 mm are short lengths. Length above 1,050 mm are fixed lengths. Pricing for fixed lengths (on the basis of price per metre)

× –

Price per Metre [€/m] Length Cost and alloy surcharges Fixed Length Surcharge [%] Discount

=

Final net price

× ×

Standard Fixed Lengths ■ The standard fixed-length surcharge is 10 %. Anchor Channels with max. anchor spacing 200 mm: JTA K 38/17, JTA K 28/15, JXA W 29/20, JXA-PC W 29/20 Standard fixed lengths [mm] 2250 3250 1250 3450 1450 2450 1650 2650 3650 1850 2850 3850 2050 3050 4050

4250 4450 4650 4850 5050

Anchor Channels with max. anchor spacing 250 mm: JTA W 53/34, JTA W 50/30, JTA W 40/22, JTA K 53/34, JTA K 50/30, JTA K 40/25, JXA W 64/44, JXA W 53/34, JXA W 38/23, JXA-PC W 64/44, JXA-PC W 53/34, JXA-PC W 38/23, JZA K 41/22 Standard fixed lengths [mm] 1300 2300 3300 1550 2550 3550 1800 2800 3800 2050 3050 4050

4300 4550 4800 5050

Anchor Channels with max. anchor spacing 300 mm: JTA W 55/42, JTA W 72/48, JTA K 72/48 Standard fixed lengths [mm] 1350 2550 3750 1650 2850 4050 1950 3150 4350 2250 3450 4650

4950 5250 5550 5850

Special fixed lengths All other fixed lengths are special fixed lengths. The calculation here is based on a fixed length surcharge of 20 % (increased production costs). Mounting and Framing Channels For mounting and framing channels, the fixed length surcharge applies which is shown in the price list. Here there are no standard lengths.


11

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Profiled Metal Sheet Channels JTB (General Technical Approval Z-21.4-161) JTB-uni €/m Anchor Distance e [mm]

Anchor per 3 m

Weight [kg/m]

Material hdg

A4

JTB 60/24/3,0-uni ( Material Strength 3 mm ) 450 150

e

8

2.38

18.40

73.65

20

2.51

25.75

96.35

JTB 60/22/6,0-uni ( Material Strength 6 mm ) 450

8

3.97

29.65

150

20

4.10

37.40

on request

End Anchor JTB - EB €/Set Material hdg 6.25

incl. 4 Drill Screws with 4,8 × 16 mm

JTB-AR €/m Anchor Distance e [mm]

Anchor pro 3 m

Weight [kg/m]

Material hdg

A4

JTB 60/24/3,0-AR ( Material Strength 3 mm )

e

450

8

2.40

18.40

73.65

150

20

2.54

25.75

96.35

JTB 60/22/6,0-AR ( Material Strength 6 mm ) 450

8

3.99

29.65

150

20

4.13

37.40

on request

End Anchor JTB - EA €/Set Material hdg 6.25

incl. 4 Drill Screws with 4,8 × 16 mm

Anchor Arrangement Standard anchor spacing e = 450 mm will be delivered if not requested otherwise

■

■

■ ■

All prices incl. foamfilling Stock length = 3,000 mm (-0/+50 mm) Weight per metre for mill finish (for galvanized profiles: weight per metre +10 %)

ʌʉʉʉ ʐʎ ʍʎʉ

ʍʎʉ

ʍʎʉ

ʊʎʉ ʍʎʉ

ʍʎʉ

ʍʎʉ

ʐʎ

e

Material and design ■ hdg = hot-dip galvanized 1.0038/1.0044 ■ A4 = stainless steel 1.4401/1.4404/1.4571 Ordering Example Profiled Metal Sheet Channels

ʐʎ

12

ʊʒëʊʎʉ

ʐʎ

Type

Profile Size

Anchor Distance

JTB

– 60/24/3,0 –

450

Anchor Type –

uni

Material – hdg


Railing Fastening JGB Straight Short Piece (General Technical Approval Z-21.4-1913) Type JGB ... G

JGB ... DA

JGB ... W

Profile1)

Anchor Diameter

Material

JGB K 38/17 G-...

10 Installation height H = 165 mm

JGB K 40/25 G-...


JGB K 50/30 G-...


JGB K 53/34 G-...


JGB K 38/17 DA-...


JGB K 40/25 DA-...


JGB K 50/30 DA-...


JGB K 53/34 DA-...


JGB K 38/17 W-...


JGB K 40/25 W-...


JGB K 50/30 W-...


JGB K 53/34 W-...


hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4 hdg A4

Profile Length Price € 100 19.80 38.30 21.15 40.00 23.90 44.90 28.65 49.40

120 20.10 39.30 21.60 41.05 24.25 46.05 29.50 52.35

–

–

42.05 43.05 46.35 47.55 50.90 23.35 45.00 25.05 47.55 27.40 51.65 32.10 53.80

53.90 23.45 46.35 25.25 48.60 27.60 53.10 32.90 56.60

150 200 20.30 21.00 41.30 44.20 21.90 22.70 43.85 47.00 24.95 26.05 49.40 54.25 30.50 32.35 56.55 63.15 Prices on request – – Prices on request 44.50 47.15 Prices on request 49.80 55.85 Prices on request 58.25 65.05 24.00 24.65 47.55 50.10 25.65 26.35 50.40 53.00 28.40 29.50 55.20 58.60 33.90 35.45 60.55 67.55

220 21.15 45.20 22.95 47.95 26.50 55.80 33.00 65.95

250 21.70 47.10 23.35 50.15 27.05 57.65 34.00 69.90

–

–

48.30 49.40 59.20 59.35 67.90 25.05 50.75 26.70 53.80 29.90 60.25 36.25 69.90

72.05 25.25 52.05 27.05 55.20 30.50 62.50 37.20 74.30

JGB Corner Piece with Reinforcing Bars (without Approval) Type G

Profile Profile Dimensions l = 170 x 170 mm

Anchor Diameter

JGB K 38/17 G-170 x 170

10

JGB K 40/25 G-170 x 170

12

JGB K 50/30 G-170 x 170

12

JGB K 53/34 G-170 x 170

14

Material

Price €

hdg A4 hdg A4 hdg A4 hdg A4

39.25 80.70 41.60 87.75 44.65 93.65 49.45 114.90

Ordering Example Railing Fastening JGB Type

Profile Size

JGB

K 38/17

Type Length Material G – 200

–

A4

JGB Corner Piece with Forged Head (without Approval) Type DA

1)

Profile Profile Dimensions l = 170 x 170 mm

Anchor Diameter

JGB K 38/17 DA-170 x 170

12

JGB K 40/25 DA-170 x 170

14

JGB K 50/30 DA-170 x 170

14

JGB K 53/34 DA-170 x 170

14

Hot rolled profiles on request

Material

Price €

hdg A4 hdg A4 hdg A4 hdg A4

Price a. A. – Price a. A. 90.40 Price a. A. 96.45 Price a. A. 118.35

Material and design ■ Hot-dip galvanized version (hdg) > 50 μm (for indoor use) ■ Profile steel 1.0038 and anchor B St 500 S ■ Stainless steel (A4) profile 1.4401/1.4404/1.4571 and anchor B St 500 S or B St 500 NR with K 38/17 ■ Filling PE foam All prices including foam filling and 2 anchors


13


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY

Profile-Brackets JK JK 28/28-1

Bracket Type

JK 36/36-1

JK 36/36-2

h

h

L

L

Profile Associated Bolts

K 28/28 Type JD, M 6–M 12

K 36/36 Type JH, M 10–M 16

K 36/36 Type JH, M 10–M 16

Extension Profile for Bolt

U 36/24 M 12

U 45/27 M 12

U 45/27 M 12

Bracket Length L [mm] Height h [mm] hdg Material €/Piece A4

100 200 300 400 300 400 500 600 300 400 500 600 700 120 120 120 120 180 180 180 180 208 238 269 300 330 24.10 24.85 25.70 26.35 32.85 34.85 38.45 42.45 45.95 50.35 55.10 59.15 64.15 Prices on request Prices on request Prices on request

Ordering Example Profile-Brackets JK Type

Profile

Bracket Length L

JK

– K 28/28-1 –

100

Material –

hdg

Edge Protection Angle JKW Type

e

I

s

92° a

a

R

L 250

n= 500

250

Material and design ■ hdg = hot-dip galvanized 1.0038 ■ A4 = stainless steel material 1.4401/1.4404/1.4571 ■ A2 = stainless steel material 1.4301

14

JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW JKW

a/s

-

50/5 50/5 50/5 50/5 50/5 80/6 80/6 80/6 80/6 80/6 100/6 100/6 100/6 100/6 100/6 100/8 100/8 100/8 100/8 100/8

Length [mm]

Number of Anchors

500 750 1000 1500 2000 500 750 1000 1500 2000 500 570 1000 1500 2000 500 750 1000 1500 2000

2 2 2 3 4 2 2 2 3 4 2 2 2 3 4 2 2 2 3 4

-

€/Piece Material hdg 30.40 36.45 48.55 59.65 76.60 39.80 52.05 69.05 90.10 115.80 45.85 60.10 73.95 108.50 142.85 53.50 73.15 99.05 132.10 171.55

A4/A2

Prices on request

Ordering Example Edge Protection Angle JKW Type JKW

Length –

50/5

–

2,000

Material –

hdg


Curved Channels Anchor Channels JTA / JXA Mounting Channels JM / JXM Profile JTA / JM 3URßOHVORWRQWKHLQVLGH

Ri ma

x./ m in. L [ m]

3URßOHVORWRQWKHRXWVLGH

LQ. max./m L[m]

Ra

Material

W 72/48

hdg, A4

K 72/48

hdg, A4

W 55/42

hdg

W 53/34

hdg, A4

K 53/34

hdg, A4

W 50/30

hdg, A4

K 50/30

hdg, A4

W 40/22

hdg, A4

K 40/25

hdg, A4

K 38/17

hdg, A4, A2

K 28/15

hdg, A4, A2

Price

Prices on request

Profile JXA/JXM W 38/23

hdg, A4

W 29/20

hdg, A4

Ri = internal profile slot; Ra = external profile slot

Ordering Example Curved Anchor Channels Type

Profile

Stretched Length L [m]

JTA – K 38/17 –

1.05

Material –

Bending Radius [m] Ri = 1,00

hdg

Minimum Bending Radii / Channel Lengths (all materials) JTA / JM

JXA / JXM

Profile

K 72/48 W 72/48

W 55/42

K 53/34 W 53/34

K 50/30 W 50/30

K 40/25 W 40/22

K 38/17

K 28/15

W 38/23

W 29/20

min Ri [m]

1.0

0.5

0.5

0.5

0.5

0.5

0.5

0.5

0.5

min Ra [m]

3.0

3.0

2.5

2.0

2.0

1.5

1.0

2.0

2.0

min L [m] minimum Channel Length

1.5

1.5

1.5

1.5

1.0

0.5

0.5

0.5

0.5

max L [m] maximum Channel Length

5.5

5.5

5.8

5.8

5.8

5.8

5.8

5.8

5.8

Material and design ■ hdg = hot-dip galvanized 1.0038 ■ A4 = stainless steel material 1.4401/1.4404/1.4571 ■ A2 = stainless steel material 1.4301


15

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Bolts & Accessories Determining the Required Bolt Length l = bolt length lk = clamping length (thickness of the attached part) f = profile nose and thickness respectively (please see profile pages) m = nut height to EN ISO 4032 s = washer thickness to EN ISO 7093-1 u = bolt projection to EN ISO 4753

f lk

l

m+s+u

JA

Bolt

Total m+s+u [mm]

M6 M8 M 10 M 12 M 16 M 20 M 24 M 27 M 30

8.8 11.3 13.9 17.3 21.8 27.0 32.5 35.8 38.6

Example JORDAHL® anchor channel JTA K 53/34, f = 8 mm, available clamping length lk = 65 mm, bolt JB M16 zp required l = 65 + 8 + 21,8 = 94,8 mm selected: JB M 16 × 100 zp

JB 41.6

58.0

l

l

for profiles: W 72/48, K 72/48 Thread × Length l [mm]

for profiles: W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, K 48/26 Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 4.6 JA M 20 × 50 hdg 50 718.25 JA M 20 × 75 hdg 50 781.85 JA M 20 × 100 hdg 25 802.35 JA M 20 × 150 hdg 25 1037.65 JA M 20 × 200 hdg 25 1185.40 JA M 24 × 50 hdg 25 687.70 JA M 24 × 75 hdg 25 755.10 JA M 24 × 100 hdg 25 848.20 JA M 24 × 150 hdg 25 1053.15 JA M 24 × 200 hdg 10 1269.40 JA M 27 × 75 hdg 10 982.95 JA M 27 × 100 hdg 10 1098.00 JA M 30 × 75 hdg 25 1096.45 JA M 30 × 100 hdg 10 1323.40 JA M 30 × 150 hdg 25 1654.95 JA M 30 × 200 hdg 5 2003.30 Hot-dip galvanized (hdg), Grade 8.8 JA M 20 × 75 hdg 8.8 50 1089.35 JA M 20 × 100 hdg 8.8 25 1183.75 JA M 20 × 125 hdg 8.8 25 1340.35 JA M 24 x 75 hdg 8.8 25 1258.35 JA M 24 × 100 hdg 8.8 25 1368.05 JA M 24 × 150 hdg 8.8 20 1631.90 JA M 24 × 200 hdg 8.8 10 1973.95 Stainless Steel, Quality A4-50 JA M 24 × 50 A4-50 20 4724.50 JA M 24 × 100 A4-50 15 6339.10 JA M 24 × 100 A4-70 15 7923.55

16

erf l [ mm ] = l k + f + ( m + s + u )

Thread × Length l [mm] JB M 10 × 30 zp JB M 10 × 40 zp JB M 10 × 50 zp JB M 10 × 60 zp JB M 10 × 80 zp JB M 10 × 100 zp JB M 12 × 30 zp JB M 12 × 40 zp JB M 12 × 50 zp JB M 12 × 60 zp JB M 12 × 80 zp JB M 12 × 100 zp JB M 12 × 125 zp JB M 12 × 150 zp JB M 12 × 200 zp JB M 16 × 30 zp JB M 16 × 40 zp JB M 16 × 50 zp JB M 16 × 60 zp JB M 16 × 80 zp JB M 16 × 100 zp JB M 16 × 125 zp JB M 16 × 150 zp JB M 16 × 200 zp JB M 16 × 300 zp JB M 20 × 35 zp JB M 20 × 45 zp

Pack Qty [Piece]

Zinc-plated (zp), Grade 4.6 100 100 100 100 100 100 100 100 100 50 50 50 50 25 25 50 50 50 50 50 50 25 25 50 25 25 25

Price €/100 Piece 260.70 261.90 265.50 274.90 322.00 339.20 220.95 230.70 239.80 247.75 281.40 344.80 515.10 609.00 827.50 267.80 275.05 289.40 297.25 338.85 400.05 514.15 580.15 703.70 990.80 339.90 343.45


Thread × Length l [mm]

JB Thread × Length l [mm]

Pack Qty [Piece]

JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 24 × JB M 24 ×

Price €/100 Piece

55 zp 25 366.45 65 zp 25 378.45 75 zp 25 400.30 100 zp 50 463.70 125 zp 25 613.80 150 zp 25 714.55 200 zp 25 918.70 300 zp 25 1210.65 60 zp 25 844.20 75 zp 25 957.60 Hot-dip galvanized (hdg), Grade 4.6 JB M 10 × 100 hdg 100 339.20 JB M 12 × 30 hdg 100 220.95 JB M 12 × 50 hdg 100 239.80 JB M 12 × 60 hdg 50 247.75 JB M 12 × 80 hdg 50 281.40 JB M 12 × 100 hdg 50 344.80 JB M 12 × 125 hdg 50 515.10 JB M 16 × 50 hdg 50 289.40 JB M 16 × 60 hdg 50 297.25 JB M 16 × 80 hdg 50 338.85 JB M 16 × 100 hdg 25 400.05 JB M 20 × 45 hdg 25 353.15 JB M 20 × 55 hdg 25 366.45 JB M 20 × 65 hdg 25 378.45 JB M 20 × 75 hdg 25 400.30 JB M 20 × 100 hdg 25 463.70 JB M 20 × 125 hdg 25 613.80 JB M 20 × 150 hdg 25 714.55 Hot-dip galvanized (hdg), Grade 8.8 JB M 12 × 40 hdg 8.8 100 332.50 JB M 12 × 50 hdg 8.8 100 390.15 JB M 12 × 60 hdg 8.8 50 441.95 JB M 12 × 80 hdg 8.8 50 470.10 JB M 12 × 100 hdg 8.8 50 540.60 JB M 16 × 50 hdg 8.8 50 477.90 JB M 16 × 60 hdg 8.8 50 545.00 JB M 16 × 80 hdg 8.8 50 588.50 JB M 16 × 100 hdg 8.8 50 697.35 JB M 16 × 125 hdg 8.8 50 877.60 25 598.35 JB M 20 × 55 hdg 8.81 ) 25 608.80 JB M 20 × 60 hdg 8.81 ) 25 617.05 JB M 20 × 65 hdg 8.81 ) 25 664.30 JB M 20 × 75 hdg 8.81 ) 25 723.35 JB M 20 × 100 hdg 8.81 ) 25 928.50 JB M 20 × 125 hdg 8.81 ) 25 1155.80 JB M 24 × 75 hdg 8.81 ) 25 1289.30 JB M 24 × 100 hdg 8.81 ) ■

1) 2)

All prices incl. nuts; washers to be ordered separately

JB M 10 × JB M 12 × JB M 12 × JB M 12 × JB M 12 × JB M 12 × JB M 12 × JB M 16 × JB M 16 × JB M 16 × JB M 16 × JB M 16 × JB M 16 × JB M 16 × JB M 16 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 20 × JB M 12 × JB M 12 × JB M 12 × JB M 16 × JB M 16 × JB M 20 × JB M 20 × JB M 20 ×

Pack Qty [Piece]

Price €/100 Piece

Stainless Steel, Quality A4-50 30 A4-50 50 1448.60 30 A4-50 50 1629.50 40 A4-50 50 1644.65 50 A4-50 50 1782.60 60 A4-50 50 1924.40 100 A4-50 50 2685.35 125 A4-50 25 3229.25 30 A4-50 50 2606.95 40 A4-50 50 2880.75 50 A4-50 25 3069.85 60 A4-50 25 3119.10 80 A4-50 25 3876.65 125 A4-50 25 4409.65 150 A4-50 25 4627.25 200 A4-50 25 5465.65 45 A4-50 25 3119.10 55 A4-50 25 3352.55 65 A4-50 25 3591.25 75 A4-50 25 3823.70 100 A4-50 25 3883.15 125 A4-50 25 4724.50 150 A4-50 25 5399.10 Stainless Steel, Quality FA-70 ( 1.4462 ) 2) 40 FA-70 50 1644.70 50 FA-70 50 1781.60 100 FA-70 25 2679.05 50 FA-70 25 3316.60 80 FA-70 25 4187.55 55 FA-70 25 3978.85 100 FA-70 25 4608.75 150 FA-70 25 6404.70

JB M 24 also applies to JE M 24

JE 41.5

for profile: W 55/42 Thread × Length l [mm]

Pack Qty [Piece]

Price €/100 Piece

Zinc-plated (zp), Grade 4.6 JE M 24 × 60 zp 25 844.20 JE M 24 × 75 zp 25 957.60 Hot-dip galvanized (hdg), Grade 8.8 JE M 24 x 75 hdg 8.8 25 1155.80 JE M 24 x 100 hdg 8.8 25 1289.30

Not for profile K 48/26 Description of FA also applies to F4 (1.4462)


17

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Bolts & Accessories Thread × Length l [mm]

JC 32.7

l

for profiles: W 40/22, K 40/22, K 40/25 Thread × Length l [mm] JC M 10 × JC M 10 × JC M 10 × JC M 10 × JC M 10 × JC M 10 × JC M 10 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 10 × JC M 10 × JC M 10 × JC M 10 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × 1) 2)

18

Pack Qty [Piece]

Price €/100 Piece

Zinc-plated (zp), Grade 4.6 20 zp 100 122.50 30 zp 100 123.70 40 zp 100 130.80 50 zp 100 133.35 60 zp 100 146.60 80 zp 100 240.15 100 zp 100 246.15 20 zp 50 152.50 30 zp 100 154.65 40 zp 100 156.65 50 zp 100 164.50 60 zp 50 172.50 80 zp 50 212.10 100 zp 50 248.70 125 zp 50 341.20 150 zp 25 527.30 200 zp 25 554.95 30 zp 50 204.20 40 zp 50 220.95 50 zp 50 237.80 60 zp 50 241.40 80 zp 100 283.40 100 zp 25 311.45 125 zp 25 476.80 150 zp 25 535.65 200 zp 25 665.25 250 zp 25 745.65 300 zp 25 894.65 Hot-dip galvanized (hdg), Grade 4.6 30 hdg 100 123.70 40 hdg 100 130.80 60 hdg 100 146.60 80 hdg 100 240.15 40 hdg 100 156.65 50 hdg 100 164.50 60 hdg 100 172.50 80 hdg 50 212.10 100 hdg 50 248.70 40 hdg 50 220.95 50 hdg 100 237.80 60 hdg 50 241.40 80 hdg 50 283.40 100 hdg 25 311.45

Description of FA also applies to F4 (1.4462) Bolts JH in combination with profile W 38/23 not for longitudinal loads

JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 10 × JC M 10 × JC M 10 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 12 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 16 × JC M 12 × JC M 12 × JC M 16 × JC M 16 ×

Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 40 hdg 8.8 100 226.00 50 hdg 8.8 100 234.30 60 hdg 8.8 100 245.10 80 hdg 8.8 50 299.20 100 hdg 8.8 50 329.75 40 hdg 8.8 50 335.00 60 hdg 8.8 50 363.30 80 hdg 8.8 50 445.60 100 hdg 8.8 25 490.90 125 hdg 8.8 25 628.90 Stainless Steel, Quality A4-50 30 A4-50 50 2089.20 40 A4-50 100 2134.25 50 A4-50 50 2220.35 30 A4-50 100 1409.10 40 A4-50 50 1558.60 50 A4-50 50 1698.80 60 A4-50 50 1784.35 80 A4-50 50 1967.60 100 A4-50 50 2167.70 150 A4-50 25 3059.30 30 A4-50 50 1596.05 40 A4-50 50 1710.05 50 A4-50 50 1851.95 60 A4-50 25 1932.40 80 A4-50 25 2095.05 100 A4-50 25 2648.20 150 A4-50 25 3472.20 200 A4-50 25 4266.50 Stainless Steel, Quality FA-70 ( 1.4462 ) 1) 40 FA-70 50 1881.85 50 FA-70 50 2038.55 40 FA-70 50 2022.10 50 FA-70 50 2222.30

JH 30.5

l

for profiles: K 38/17, K 36/36, K 36/20, W 38/23 2 ) Thread × Length l [mm] JH M 10 × JH M 10 × JH M 10 × JH M 10 × JH M 10 × JH M 10 × JH M 10 × JH M 10 ×

20 zp 30 zp 40 zp 50 zp 60 zp 80 zp 100 zp 150 zp

Pack Qty [Piece]

Zinc-plated (zp), Grade 4.6 100 100 100 100 100 50 50 50

Price €/100 Piece 112.90 114.05 121.20 126.15 129.80 174.25 220.00 390.45


JH

JD Thread × Length l [mm]

JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 10 × JH M 10 × JH M 10 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 16 × JH M 16 × JH M 12 × JH M 16 × JH M 10 × JH M 10 × JH M 10 × JH M 10 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 12 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × JH M 16 × 3) 4)

Pack Qty [Piece]

Price €/100 Piece

Zinc-plated (zp), Grade 4.6 20 zp 100 120.15 30 zp 100 126.85 40 zp 100 130.80 50 zp 100 135.70 60 zp 50 146.60 80 zp 50 158.55 100 zp 25 255.80 125 zp 25 327.05 150 zp 25 396.30 200 zp 25 654.00 300 zp 25 878.90 30 zp 50 176.50 40 zp 50 179.05 50 zp 50 195.75 60 zp 50 213.80 80 zp 50 247.40 100 zp 25 313.10 125 zp 25 443.20 150 zp 25 519.25 200 zp 25 761.55 Hot-dip galvanized (hdg), Grade 4.6 50 hdg 50 126.50 60 hdg 50 129.80 80 hdg 50 174.25 30 hdg 100 126.85 40 hdg 100 130.80 60 hdg 50 146.60 80 hdg 50 158.55 100 hdg 25 255.80 125 hdg 25 327.05 40 hdg 50 179.05 50 hdg 50 195.75 Hot-dip galvanized (hdg), Grade 8.8 100 hdg 8.8 25 297.00 60 hdg 8.8 50 367.35 Stainless Steel, Quality A4-50 30 A4-50 100 992.65 40 A4-50 100 1113.90 50 A4-50 100 1153.15 60 A4-50 100 1213.05 25 A4-50 100 926.90 30 A4-50 100 973.85 40 A4-50 100 1035.25 50 A4-50 100 1113.90 60 A4-50 100 1231.65 80 A4-50 100 1270.70 100 A4-50 100 1699.45 150 A4-50 25 2711.80 200 A4-50 50 3053.50 25 A4-50 50 1252.25 30 A4-50 50 1304.50 40 A4-50 50 1416.45 50 A4-50 25 1566.20 60 A4-50 25 1665.25 80 A4-50 25 1913.70 100 A4-50 25 2147.30 150 A4-50 25 3343.40 200 A4-50 25 4016.70

Bolts JD in combination with profile W 29/20 not for longitudinal loads JD M 12 not for profile K 28/12


22.4

l

for profiles: K 28/28, K 28/15, K 28/12, W 29/20 3 ) Thread × Length l [mm]

Pack Qty [Piece]

Price €/100 Piece

Zinc-plated (zp), Grade 4.6 JD M 6 × 15 zp 500 69.70 JD M 6 × 20 zp 500 70.95 JD M 6 × 25 zp 500 72.05 JD M 6 × 30 zp 500 75.60 JD M 6 × 40 zp 500 76.95 JD M 6 × 50 zp 500 79.25 JD M 6 × 60 zp 500 81.60 JD M 8 × 15 zp 500 56.50 JD M 8 × 20 zp 500 57.80 JD M 8 × 25 zp 500 58.80 JD M 8 × 30 zp 500 61.25 JD M 8 × 40 zp 500 64.95 JD M 8 × 50 zp 500 67.20 JD M 8 × 60 zp 500 82.95 JD M 8 × 80 zp 500 144.65 JD M 8 × 100 zp 100 195.75 JD M 8 × 150 zp 100 359.25 JD M 10 × 15 zp 500 75.35 JD M 10 × 20 zp 500 78.10 JD M 10 × 25 zp 500 80.45 JD M 10 × 30 zp 500 83.25 JD M 10 × 40 zp 100 95.10 JD M 10 × 50 zp 100 103.35 JD M 10 × 60 zp 100 108.05 JD M 10 × 80 zp 50 156.20 JD M 10 × 100 zp 50 208.90 JD M 10 × 125 zp 50 320.75 JD M 10 × 150 zp 100 390.45 JD M 10 × 200 zp 50 618.45 200 145.30 JD M 12 × 30 zp 4 ) 100 150.35 JD M 12 × 40 zp 4 ) 100 158.55 JD M 12 × 50 zp 4 ) 100 172.95 JD M 12 × 80 zp 4 ) Hot-dip galvanized (hdg), Grade 4.6 JD M 10 × 30 hdg 500 83.25 JD M 10 × 40 hdg 100 95.10 JD M 10 × 60 hdg 100 108.05 JD M 10 × 80 hdg 50 156.20 JD M 10 × 100 hdg 50 208.90 100 158.55 JD M 12 × 50 hdg 4 ) JD M 8 × 30 A4-50 100 570.15 JD M 8 × 50 A4-50 100 668.30 JD M 10 × 20 A4-50 100 585.05 JD M 10 × 25 A4-50 100 611.00 JD M 10 × 30 A4-50 100 637.45 JD M 10 × 40 A4-50 100 687.60 JD M 10 × 50 A4-50 100 747.70 JD M 10 × 60 A4-50 100 794.20 JD M 10 × 80 A4-50 100 977.45 JD M 10 × 100 A4-50 50 1291.70 JD M 10 × 125 A4-50 50 1446.50 JD M 10 × 150 A4-50 50 1654.00 JD M 10 × 200 A4-50 50 2225.60

19


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY

Bolts & Accessories Toothed Bolts

JG

JXE

17.0

ʎʊ

l l

for profile: K 21/12 Thread × Length l [mm] JG M 6 × JG M 6 × JG M 6 × JG M 6 × JG M 6 × JG M 6 × JG M 8 × JG M 8 × JG M 8 × JG M 8 × JG M 8 × JG M 8 × JG M 8 × JG M 8 × JG M 8 ×

15 20 30 40 50 60 15 20 25 30 40 50 60 80 100

JG M 8 × 30 JG M 8 × 40 JG M 8 × 50

Pack Qty [Piece]

Zinc-plated (zp), Grade 4.6 zp 500 zp 500 zp 500 zp 200 zp 200 zp 100 zp 400 zp 400 zp 400 zp 400 zp 400 zp 400 zp 100 zp 100 zp 100 Stainless Steel, Quality A4-50 A4-50 250 A4-50 250 A4-50 250

Price €/100 Piece 58.80 62.40 66.15 70.95 76.95 81.60 58.80 61.25 62.40 63.70 70.95 78.10 91.30 264.25 270.30

for profile: JXA W 64/44 Thread × Length l [mm]

Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 JXE M 20 × 60 hdg 8.8 50 1531.20 JXE M 20 × 100 hdg 8.8 25 1815.80 JXE M 20 × 150 hdg 8.8 25 2146.70 JXE M 24 × 75 hdg 8.8 25 1726.15 JXE M 24 × 100 hdg 8.8 25 1954.00 JXE M 24 × 150 hdg 8.8 25 2398.90 Stainless Steel, Quality FA-70 ( 1.4462 ) 1) JXE M 20 × 50 FA-70 50 6667.35 JXE M 20 × 100 FA-70 25 8971.30 JXE M 24 × 50 FA-70 50 7076.80 JXE M 24 × 100 FA-70 25 9460.30

JXB

521.50 556.90 643.10

41.6

Breaking Point Bolts

l

JB-SB, JH-SB for profile: JXA W 53/34 Thread × Length l [mm]

60.0

JB-SB for profiles: W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, K 48/26 JH-SB for profiles: K 38/17, K 36/36, K 36/20, W 38/23 Thread × Length l [mm]

Pack Qty [Piece]

Zinc-plated (zp), Grade 4.6 JB M 12 x 60 - SB 20 zp JB M 12 x 60 - SB 25 zp Prices on request JH M 12 x 60 - SB 20 zp JH M 12 x 60 - SB 25 zp

20

Price €/100 Piece

Prices on request

Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 JXB M 16 × 60 hdg 8.8 50 1226.70 JXB M 16 × 80 hdg 8.8 25 Prices on request JXB M 16 × 100 hdg 8.8 25 JXB M 20 × 65 hdg 8.8 25 1420.50 JXB M 20 × 80 hdg 8.8 25 1460.00 JXB M 20 × 100 hdg 8.8 25 Prices on request JXB M 20 × 150 hdg 8.8 25 Stainless Steel, Quality FA-70 ( 1.4462 ) 1) JXB M 16 × 60 FA-70 25 5445.45 JXB M 16 × 80 FA-70 25 Prices on request JXB M 16 × 100 FA-70 25 JXB M 20 × 80 FA-70 25 6679.10 JXB M 20 × 100 FA-70 25 Prices on request JXB M 20 × 150 FA-70 25

■

All prices incl. nuts; washers to be ordered separately


JXH

JZS 28.9

34.5

l

l

for profile: JXA W 38/23

for profile: JZA K 41/22


Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 JXH M 12 × 30 hdg 8.8 100 303.90 JXH M 12 × 40 hdg 8.8 100 311.85 JXH M 12 × 50 hdg 8.8 100 326.85 JXH M 12 × 60 hdg 8.8 50 335.05 JXH M 12 × 80 hdg 8.8 50 525.75 JXH M 12 × 100 hdg 8.8 25 695.75 JXH M 16 × 30 hdg 8.8 50 363.30 JXH M 16 × 40 hdg 8.8 50 386.55 JXH M 16 × 50 hdg 8.8 50 402.15 JXH M 16 × 60 hdg 8.8 50 421.60 JXH M 16 × 80 hdg 8.8 50 492.65 JXH M 16 × 100 hdg 8.8 25 525.75 JXH M 16 × 125 hdg 8.8 25 695.90 JXH M 16 × 150 hdg 8.8 25 1311.05 Stainless Steel, Quality FA-70 ( 1.4462 ) JXH M 12 × 40 FA-70 50 1402.10 JXH M 12 × 60 FA-70 50 1494.60 JXH M 12 × 80 FA-70 50 2345.95 JXH M 16 × 60 FA-70 25 1550.05


Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 JZS M 10 × 40 hdg 8.8 50 325.10 JZS M 12 × 35 hdg 8.8 50 361.45 JZS M 12 × 50 hdg 8.8 50 393.90 JZS M 12 × 80 hdg 8.8 50 582.90 JZS M 16 × 50 hdg 8.8 50 602.80 JZS M 16 × 100 hdg 8.8 50 838.40 Stainless Steel, Quality A4-50 JZS M 12 × 35 A4-50 50 2304.20 JZS M 12 × 50 A4-50 50 2461.40 JZS M 12 × 80 A4-50 50 2565.90 JZS M 16 × 35 A4-50 25 2096.95 JZS M 16 × 50 A4-50 25 2493.10 JZS M 16 × 80 A4-50 25 3162.25 JZS M 16 × 100 A4-50 25 3383.20

Double-Notch Toothed Bolts JKB 41.6

JXD 20.9

l

l

for profiles: W 50/30, W 53/34, W 55/42 Thread × Length l [mm]

for profile: JXA W 29/20 Thread × Length l [mm]

Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 JXD M 10 × 40 hdg 8.8 100 210.80 JXD M 12 × 30 hdg 8.8 100 231.50 JXD M 12 × 40 hdg 8.8 100 250.50 JXD M 12 × 50 hdg 8.8 100 269.60 JXD M 12 × 60 hdg 8.8 100 273.85 JXD M 12 × 80 hdg 8.8 100 321.20 JXD M 12 × 100 hdg 8.8 50 389.45 JXD M 12 × 125 hdg 8.8 50 540.90 JXD M 12 × 150 hdg 8.8 25 1025.70 Stainless Steel, Quality FA-70 ( 1.4462 ) 1) JXD M 12 × 40 FA-70 50 1754.50 JXD M 12 × 60 FA-70 50 1917.65 JXD M 12 × 80 FA-70 50 2249.90

Ordering Example Bolts Type JH

Thread M 12 ×

Length [mm]

Material

100

zp

JKB M 16 × JKB M 16 × JKB M 16 × JKB M 20 × JKB M 20 × JKB M 20 ×

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 40 hdg 8.8 50 60 hdg 8.8 50 80 hdg 8.8 25 45 hdg 8.8 25 60 hdg 8.8 25 80 hdg 8.8 25

507.30 575.00 618.50 628.00 638.80 683.70

JKC 30.1

l

for profile: W 40/22 Thread × Length l [mm]

Pack Qty [Piece]

Price €/100 Piece

Hot-dip galvanized (hdg), Grade 8.8 JKC M 16 × 40 hdg 8.8 50 388.15 JKC M 16 × 60 hdg 8.8 50 439.45 JKC M 16 × 80 hdg 8.8 25 513.05 1)


Pack Qty [Piece]

Description of FA also applies to F4 (1.4462)

21


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY

Bolts & Accessories Hook-head Locking Plates JGM (forged) For Profile JGM A W 72/48 K 72/48

h b

l

JGM B

h l

b

W 55/42 W 53/34 K 53/34 K 50/40 W 50/30 K 50/30 K 48/26

JGM C W 40/22 K 40/25 K 40/22

h l

b

Material

M6

Thread M 10 M 12 Price € / 100 Piece – – – –

M8

I × b × h [mm] – – Pack Qty – – zp on request A4 I × b × h [mm] 41 × 21 × 16 41 × 21 × 16 41 × 21 × 16 41 × 21 × 16 Pack Qty 100 100 100 100

M 16

M 20

– –

57 × 31 × 22 50

41 × 26 × 16 100

– –

zp

232.95

232.95

232.95

232.95

351.45

–

A4

1459.55

1459.55

1459.55

1459.55

1459.55

–

32 × 17 × 11 250

32 × 17 × 11 250

32 × 17 × 11 250

32 × 23 × 13 250

– –

I × b × h [mm] 32 × 17 × 11 Pack Qty 250 zp

185.05

185.05

185.05

204.20

287.30

–

A4

1411.05

1411.05

1411.05

1435.25

1435.25

–

M 10

M 12

30 × 18 × 8 300 85.25

30 × 18 × 8 300 85.25

Hammer-head Locking Plates JGM (flat steel) For Profile JGM H K 38/17 K 36/36 K 36/20

b l

h

JGM D K 28/15 K 28/28 K 28/12 JGM G K 21/12

Material

M4

M5

I × b × h [mm] Pack Qty zp

– – –

30 × 14 × 6 500 85.25

Thread M6 M8 Price € / 100 Piece 30 × 14 × 6 30 × 14 × 6 500 500 85.25 85.25

A4

–

–

775.70

775.70

775.70

775.70

I × b × h [mm] Pack Qty zp Pack Qty A4 I × b × h [mm] Pack Qty zp A4

21 × 12 × 4 1000 40.85 400 512.05 16 × 12 × 4 1000 39.65 –

21 × 12 × 4 1000 40.85 400 512.05 16 × 12 × 4 1000 39.65 444.90

21 × 12 × 4 1000 40.85 400 512.05 16 × 12 × 4 1000 39.65 444.90

21 × 12 × 6 1000 40.85 400 512.05 16 × 12 × 6 1000 39.65 444.90

18 × 14 × 6 1000 40.85 1000 512.05 – – – –

– – – – – – – – –

Channel Nuts JAM For Profile JAM 22 K 41/41

h l

b

JAM F 22 mit Feder K 41/41

h l

b

Thread M8 M 10 Price € / 100 Piece 35 × 20 × 6 30 × 18 × 8 500 500 82.50 95.10 104.30 118.10 35 × 20 × 6 35 × 20 × 8 500 500

Material

M6

M 12

I × b × h [mm] Pack Qty zp hdg I × b × h [mm] Pack Qty

35 × 20 × 6 500 75.60 97.30 35 × 20 × 6 500

zp

91.95

98.65

106.50

120.40

hdg

110.25

117.00

127.05

146.50

35 × 20 × 9,5 500 105.35 128.45 35 × 20 × 9,5 500

Notch Toothed Bolts JKZS

22

Type

Material

M 16

hdg

For Bolts

Price €/ 100 Piece

M 16; 8.8 305.00


Hexagon Bolts DIN EN ISO 4032 (DIN 934) Material

M6

zp

2.60

4.90

A4

9.70

18.30

Thread M 12 M 16 Price €/100 Piece 9.90 16.00 28.40

M8

M 10

42.25

64.75

117.65

M 20

M 24

57.60

112.00

227.75

560.65

Washer DIN EN ISO 7089 (DIN 125) (without chamfer) Material zp

2.55

3.85

6.45

A4

9.10

14.85

25.55

43.10

78.50

115.80

4.20

6.38

10.65

12.60

22.95

44.85

64.80

hdg 8.8 zp 8.8 A4-70

200 HV

8,4 M8

Internal Diameter [mm] 13 17 21 M 12 M 16 M 20 Price €/100 Piece 7.65 13.90 27.15

6,4 M6

10,5 M 10

25 M 24

28 M 28

31 M 31

39.25

–

–

163.00

–

–

91.10

112.05

2.80

4.25

7.10

8.40

15.30

29.90

43.20

67.30

72.80

11.85

19.30

33.20

56.05

102.05

150.50

211.90

315.60

378.50

Washer DIN EN ISO 7093-1 (DIN 9021)

zp

6.90

9.10

Internal Diameter [mm] 10,5 13 Price €/100 Piece 12.60 22.10

A4

30.40

40.20

54.15

Material

6,4

8,4

108.15

17

22

37.30

112.10

137.40

386.00

Spring Washer DIN 127 Material

A6

A8

zp

2.60

2.90

A4

10.05

19.90

A 10

A 12 Price €/100 Piece 4.45 6.75

31.35

43.40

A 16

A 20

A 24

13.95

22.35

48.45

105.40

149.80

–

Hexagonal Coupling Sleeve Material

M 6 × 15

M 8 × 20

zp

46.60

70.35

s L e

A4

Thread × Length [mm] M 10 × 25 M 12 × 30 Price €/100 Piece 192.10 223.30

M 16 × 40

M 20 × 50

339.90

496.00

M 16 × 40

M 20 × 50

239.05

419.10

Prices on request

Coupling Sleeve Round D L

Material

M 6 × 20

M 8 × 20

zp

42.05

57.80

A4

Thread × Length [mm] M 10 × 25 M 12 × 30 Price €/100 Piece 93.75 149.05 Prices on request

Self Locking Nut with Serrated Bearing Material zp

Thread M 12

M 16

Prices on request


23

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Bolts & Accessories Clamp Connections JSV Material A4 JSV

Type

SP

JSV–28–1 JSV–28–2 JSV–38–1 JSV–38–2 JSV–38–3 JSV–38–4 JSV–38–5 JSV–38–6 JSV–40–1 JSV–40–2 JSV–40–3

Load Category FRd [kN] 4.9 7.0

9.8

11.2

Sleeve

Bolt Left-hand Thread

Bolt Right-hand Thread

Price €/Piece

SP 10 x 50 SP 10 x 80 SP 12 x 50 SP 12 x 80 SP 12 x 80 SP 16 x 50 SP 16 x 80 SP 16 x 80 SP 16 x 50 SP 16 x 80 SP 16 x 80

JDL–M 10 × 50 JDL–M 10 × 50 JHL–M 12 × 50 JHL–M 12 × 50 JHL–M 12 × 50 JHL–M 16 × 50 JHL–M 16 × 50 JHL–M 16 × 50 JCL–M 16 × 50 JCL–M 16 × 50 JCL–M 16 × 50

JD–M 10 × 40 JD–M 10 × 60 JH–M 12 × 50 JH–M 12 × 60 JH–M 12 × 100 JH–M 16 × 50 JH–M 16 × 80 JH–M 16 × 100 JC–M 16 × 60 JC–M 16 × 60 JC–M 16 × 100

38.90 41.50 53.35 56.25 61.15 75.30 82.25 84.75 83.95 87.25 104.95

Turnbuckle SP Material A4 (with right/ left thread and hole)

SP 10 × 50

SP 10 × 80

SP 12 × 50 SP 12 × 80 Price €/100 Piece

1870.70

2020.55

2254.05

M 8 × 50

M 10 × 50

105.75

109.20

SP 16 × 50

SP 16 × 80

3213.05

3529.95

2409.05

Eyelet Socket ÖM Material zp A4

M 12 × 60 M 16 × 80 Price €/100 Piece 118.90 255.90 Prices on request

M 20 × 100 377.60

Ring Nuts RM DIN 582 Material

M8

M 10

roh zp

179.05 251.00

283.40 332.65

Thread M 12 M 16 Price €/100 Piece 386.75 522.40 434.80 609.00

M 20

M 24

731.30 874.30

1506.55 1886.80

M 16

M 20

615.00 4969.20

905.45 8052.10

Threaded Rods GS ( Length L = 1.000 mm ) Material

M6

M8

zp A4

116.60 828.00

134.60 1282.00

Thread M 10 M 12 Price €/100 Piece 208.90 297.90 2010.75 3031.30

Pressure Bolt JDS Material A4 Thread JDS

Bolt Length [mm]

M 10

M 12

M 16

M 20

10.55 16.75 10.55 16.75 10.55 16.75 10.55 16.75 10.55 16.75 11.55 17.55 11.55 17.55 Prices on request 1.10 1.20

29.55 29.55 29.55 29.55 29.55 32.50 32.50

€/Piece

round plastic sleeve

24

80 100 120 140 160 180 200 220 / 240 sleeve length 80 mm

9.15 9.15 9.15 9.15 9.50 9.75 10.55 1.05

1.20


Toothed Straps JVB-Z 1 ) (toothed) Type JVB-Z

Load Category FRd [kN]

Series

counter plate

12 For Profile K 28/15

4.9


9.8

LL

L

JVB-L-Z/Series

€/Piece

Slot Size

Material JVB– 90–Z/12 JVB– 115–Z/12 JVB– 140–Z/12 JVB– 165–Z/12 JVB– 190–Z/12 JVB– 215–Z/12 JVB– 240–Z/12 JVB– 115–Z/18 JVB– 140–Z/18 JVB– 165–Z/18 JVB– 190–Z/18 JVB– 215–Z/18 JVB– 240–Z/18

LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 13 × 55 LL 13 × 55 LL 13 × 55 LL 13 × 55 LL 13 × 55 LL 13 × 55

zp 8.50 8.70 8.70 8.85 9.00 9.10 9.15 9.85 9.90 9.95 10.05 10.35 10.55

A4 13.30 15.30 15.80 16.35 16.45 17.15 17.90 18.60 19.05 19.45 20.35 20.90 21.95

Toothed Straps JVB-ZS 1 ) (toothed with bolt) Typ JVB-ZS

Load Category FRd [kN]

Serie

counter plate


4,9


9,8

LL

L 1)

JVB-L-ZS/Serie

€/Piece

Slot Size

Material JVB– 115–ZS/12 JVB– 140–ZS/12 JVB– 165–ZS/12 JVB– 190–ZS/12 JVB– 215–ZS/12 JVB– 140–ZS/18 JVB– 165–ZS/18 JVB– 190–ZS/18 JVB– 215–ZS/18

LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 11 × 55 LL 13 × 55 LL 13 × 55 LL 13 × 55 LL 13 × 55

zp 14.70 14.80 14.85 15.20 15.25 16.90 17.20 17.70 17.75

A4 28.90 29.50 30.35 30.65 31.60 38.60 38.95 40.50 40.95

Price incl. counter plate 30 × 30 mm

End Anchors for Anchor Channels JE

Type

Corresponding Anchor Channels

JE 1

JTA K 28/15

Pack Qty [Piece]

Bolt Thread

€/Piece Material zp

A4

25

M8

3.55

7.50

25

M 10

4.05

8.80

JTA K 38/17 JE 2

JTA W 40/22 JTA K 40/25

Material and design ■ zp = S 235 JR, zinc-plated ■ A4 = stainless steel 1.4401/1.4404/1.4571


25

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Bolts & Accessories Clamping Plates for Crane Rails KP-A 45

Material

KP-A 55

KP-A 65

KP-A 75

Price €/100 Piece

Diameter

22 mm

18 mm/ 22 mm

22 mm

22 mm

hdg

832.25

882.70

933.15

971.40

Other diameters on request.

Clamping Plates DIN 3568 Material Slot Size hdg

KP 50/7

KP 60/10

KP 60/12

KP 60/14

KP 60/16

KP 60/18

KP 60/20

Price €/100 Piece LL 14 × 20 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 723.50 794.95 809.45 824.90 839.35 855.00 870.65

Ordering Example Clamping Plates DIN 3568 Type

Material

KP – 60/10

–

hdg

Clamping Claw and Adaptor Material

Price €/100 Piece

hdg SKUA

SKUS

Set consists of clamping claw SKUS and adaptor SKUA for clamping level 5-40 mm for bolts M 12 8.8

764.80

Material ■ hdg = hot-dip galvanized

26


Frame Shoes JG Type

JG-A 2.5

JG-K 4 1 )

JG-K 9 1 )

JG-K 12 1 )

Colour

grey

yellow

grey

red

Hole [mm] Frame Shoe €/Piece

1 × 11 17.30

2 × 11 21.55

4 × 14 26.80

4 × 14 35.65

Type

JG-H 2,5 1 )

JG-H 5 1 ) 2)

JG-H 9 1 ) 2)

JG-L 2.5 1 )

Colour

grey

blue

blue

grey

Frame Shoe €/Piece

26.95

34.65

34.65

21.25

25 × 25 × 95 PE 2.70

30 × 30 × 95 PE 2.95

30 × 30 × 105 hdg 9.40

25 × 25 × 95 PE 2.70

Associated Sleeve

Sleeve Dimension Frame Sleeve €/Piece

Frame shoes for square timber widths: 10 cm (12 cm on request) 1) type-examination tested 2) The frame shoes JG-H 5 and JG-H 9 are identically constructed

Material and design ■ Frame shoe – steel 1.0038 colour coated ■ Sleeve St – steel 1.0038 ■ Sleeve PE – plastic

Ordering Example Frame Shoe Type JG-K 4


27


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY

Brick Ties Brick Ties Channels / Anchor Channels Kt 25/15-D 1 )

JTA K 28/15 2 )

JTA K 38/17 2 )

Brick Tie Anchor: Series 12 Weight: 0.34 kg/m



3

2,3

15

12

25

28

Material €/m

Anchor [Piece/m]

sv 3.10

6/m

18

15

A4 13.85

Anchor [Piece/M] 4/m Fixed Length Surcharge

17

38

Material €/m hdg 16.10

A4 58.05

10%

10%

Anchor [Piece/M] 4/m Fixed Length Surcharge

Material €/m hdg 21.50

A4 87.00

10%

10%

Thin-Bed Brick Tie Anchors JMA-D

Brick Tie Anchor JMA Series 12 Type JMA-.../12 3 ) for profiles: Kt 25/15-D, K 28/15

Series 18 Type JMA-.../18 3 ) for profile: K 38/17

Series 12 Type JMA-...-D/12 3 ) for profiles: Kt 25/15-D, K 28/15

L1= 20

L1= 20

L2

L2

L

30

b

Length L2 [mm] 85 120 180 300

Material €/100 Piece hdg 66.15 75.60 105.75 195.75

A4 303.10 369.95 456.20 670.85

Length L2 [mm] 85 120 180 300

25

Material €/100 Piece hdg 79.25 96.00 128.55 228.15

Length L [mm]

A4 375.70 416.75 491.65 744.05

125 185 245

Material €/100 Piece A2 190.95 218.70 246.65

1)

Pack.-unit 1 bundle = 100 pieces stock length = 2,500 and 5,000 mm (-0/+50 mm) no fixed length 2) stock length: see page 7 3) Pack.-unit = 100 pieces

■

■

■

Sliding Sleeve JMA-G 150 / 12 4 )

€ / 100 Piece 4)

28

for JMA 120/12

126.20

■

All prices incl. foamfilling and nailholes Fixed length: 1,050 mm < L < 6,000 mm K 38/17 also with anchor height h ca. 30 mm, without official approval (price on request) Weight per metre valid for mill finish channel (for galvanized profiles: weight per metre +10 %) Material and design ■ K = cold formed ■ hdg = hot-dip galvanized 1.0038 ■ sv = pre-galvanized 1.0038 ■ A2 = stainless steel, 1.4301/1.4541 ■ A4 = stainless steel, 1.4401/1.4404/1.4571


Brick Tie Anchor JMA-Q and JMA-QE Series 12 Type JMA-... × ...-Q/12

Series 18

Type JMA-... × ...-QE/12

for profiles: Kt 25/15-D, K 28/15

L 1 = 20 mm

L 1 = 20 mm L2

L 1 = 20 mm L2

L2

25

30

Material €/100 Piece hdg 767.30 786.80 821.00 958.35 806.25 821.00 860.15 978.75 947.60 958.35 978.75 1128.80

120

180

300

JMA

Length L2 × L3 –

85 × 120

A4 1207.00 1271.55 1389.55 1889.45 1330.40 1389.55 1507.60 1973.45 1838.80 1889.45 1963.80 2494.70

Material €/100 Piece

85 120 180 300 85 120 180 300 85 120 180 300

hdg 822.40 845.55 901.40 1005.20 873.45 901.35 957.10 1030.35 990.80 1005.20 1030.35 1161.45

120

180

300

A4 1368.05 1458.95 1658.90 2007.05 1568.05 1658.90 1854.30 2110.10 1947.30 2007.05 2109.90 2518.05

Ordering Example Brick Tie Anchor

Series – QE / 12

30

Length L2 Length L3 [mm] [mm]

Ordering Example Brick Tie Anchor Type

L3

L3

25

Length L2 Length L3 [mm] [mm]

Type JMA-... × ...-QE/18

L 1 = 20 mm L2

L3

L3

85 120 180 300 85 120 180 300 85 120 180 300

Type JMA-... × ...-Q/18 for profile: K 38/17

–

Material

Type

hdg

JMA

Length –

180

Series –

12

Material –

A4

Timber Fixing Strap Series 12 Typ JNA-.../12 1 ) for profiles: Kt 25/15-D, K 28/15

Series 18 Typ JNA-.../18 1 ) for profile: K 38/17

L

L 35

Length L [mm] 100 130 200 1)

Material €/100 Piece hdg 140.50 163.35 215.00

35

Length L [mm] 100 130 200

Material €/100 Piece hdg 140.50 163.35 215.00

Pack Qty = 100 pieces


29


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY

Studrails, Shear Reinforcement Studrails JDA, Shear Reinforcement JDA-S with 2 Anchors Reinforcing Element JDA ( General Technical Approval Z-15.1-214 ) Reinforcing Element JDA-S ( General Technical Approval Z-15.1-268 )

lL

2 Anchor

dA hA

Assembly Aid JDA – Q

€ / Piece 0,95

Price Calculation for Multi-anchors: Price = Price JDA with 2 Anchors × Factor Anchor Number 4 5 6 7 8

Factor 2,0 2,5 3,0 3,5 4,0

Material ■ BSt 500 S ■ Bars of structural steel

Ordering Example Studrails Type JDA

30

No. of Anchors –

2

Anchor dA –

14

Anchor Height hA –

225

Strip Length lL –

340

Diameter Anchor dA [mm]

Anchor length hA [mm]

10

12

125 135 145 155 165 175 185 195 205 215 225 235 245 255 265 275 285 295 305 315 325 335 345 355 365 375 385 395 405 415 425 435 445 455 465 475 485 495 505 515 525 535 545 555 565 575 585 595 605 615 625 635 645 655 665 675 685 695

9.10 9.10 9.10 9.15 9.15 9.25 9.35 9.35 9.35 9.40 9.40 9.50 9.50 9.50 9.55 9.65 9.80 10.00 10.00 10.05 10.10 10.20 10.25 10.30 10.35 10.50 10.55 10.65 10.70 10.80 10.85 10.85 10.90 11.05 11.05 11.15 11.25 11.35 11.45 11.55 11.60 11.70 11.80 11.85 11.85 11.95 12.00 12.00 12.05 12.30 12.30 12.35 12.40 12.45 12.60 12.65 12.70 12.75

10.05 10.05 10.10 10.10 10.10 10.25 10.25 10.30 10.30 10.35 10.35 10.50 10.55 10.55 10.70 10.75 10.75 10.80 10.80 10.85 11.00 11.05 11.15 11.30 11.35 11.45 11.45 11.55 11.65 11.70 11.85 11.85 11.95 12.00 12.00 12.15 12.30 12.30 12.35 12.40 12.45 12.65 12.65 12.70 12.85 12.85 13.05 13.10 13.15 13.20 13.25 13.35 13.45 13.50 13.55 13.55 13.60 13.65

14

16

Price € / Piece – – – – 10.75 – 10.85 12.10 10.85 12.10 10.85 12.15 10.90 12.25 10.90 12.25 11.00 12.30 11.05 12.40 11.05 12.40 11.25 12.65 11.25 12.65 11.25 12.65 11.35 12.70 11.45 12.80 11.55 12.85 11.55 13.05 11.60 13.10 11.65 13.15 11.70 13.15 11.85 13.20 11.85 13.25 12.00 13.35 12.00 13.35 12.05 13.45 12.25 13.50 12.30 13.55 12.35 13.65 12.40 13.80 12.40 13.90 12.65 14.00 12.65 14.00 12.70 14.10 12.80 14.20 12.85 14.20 12.85 14.25 13.10 14.35 13.15 14.40 13.20 14.45 13.25 14.60 13.35 14.65 13.45 14.75 13.55 14.85 13.55 14.95 13.60 15.00 13.80 15.05 13.90 15.10 13.90 15.10 14.00 15.35 14.10 15.40 14.15 15.55 14.20 15.60 14.25 15.65 14.35 15.80 14.35 15.80 14.45 15.85 14.60 15.90

20

25

– – – – – – 14.95 14.95 15.05 15.10 15.10 15.25 15.35 15.40 15.40 15.55 15.65 15.70 15.80 15.90 15.95 16.00 16.15 16.25 16.30 16.45 16.60 16.60 17.55 17.75 17.80 17.85 18.00 18.15 18.25 18.35 18.60 18.65 18.80 18.90 19.05 19.20 19.40 19.45 19.60 19.70 19.75 19.85 20.15 20.20 20.30 20.40 20.60 20.75 20.80 20.95 21.00 21.10

– – – – – – – – – – – – 21.85 21.85 21.85 21.95 21.95 22.05 22.10 22.25 22.35 22.50 22.55 22.60 22.60 22.85 23.00 23.05 24.15 24.20 24.25 24.50 24.55 24.65 24.90 25.00 25.05 25.10 25.45 25.60 25.80 25.95 26.10 26.20 26.35 26.45 26.55 26.70 26.95 27.15 27.25 27.40 27.55 27.60 27.75 27.80 27.85 28.00


Studrails JDA, Shear Reinforcement JDA-S with 3 Anchors Reinforcing Element JDA ( General Technical Approval Z-15.1-214 ) Reinforcing Element JDA-S ( General Technical Approval Z-15.1-268 ) 3 Anchors

lL

dA

hA

Spacers

Material

€/Piece

For in-situ concrete use AH-DA 15/20 Plastic AH-DA 25 Plastic Prices on request AH-DA 30 Plastic AH-DA 35 Plastic For pre-cast concrete use FBA 15 Fibre concrete FBA 20 Fibre concrete Prices on FBA 25 Fibre concrete request FBA 30 Fibre concrete AH-FT Plastic

Material ■ BSt 500 S ■ Bars of structural steel

Ordering Example Studrails Type JDA

No. of Anchors –

3

Anchor dA

Anchor Height hA

14

225

–

–

Strip Length lL –

Other lengths on request.


510

Diameter Anchor dA [mm]

Anchor length hA [mm]

10

12

125 135 145 155 165 175 185 195 205 215 225 235 245 255 265 275 285 295 305 315 325 335 345 355 365 375 385 395 405 415 425 435 445 455 465 475 485 495 505 515 525 535 545 555 565 575 585 595 605 615 625 635 645 655 665 675 685 695

13.55 13.55 13.55 13.65 13.80 13.90 14.00 14.00 14.00 14.15 14.15 14.20 14.25 14.25 14.40 14.45 14.65 14.90 15.00 15.00 15.10 15.25 15.40 15.40 15.55 15.70 15.80 15.90 16.00 16.20 16.25 16.30 16.45 16.60 16.65 16.70 16.80 17.10 17.20 17.20 17.30 17.45 17.55 17.75 17.75 17.90 18.00 18.15 18.20 18.35 18.40 18.60 18.60 18.80 18.90 18.95 19.05 19.20

15.00 15.00 15.10 15.10 15.10 15.40 15.40 15.40 15.40 15.55 15.55 15.70 15.80 15.80 16.00 16.15 16.15 16.20 16.20 16.30 16.60 16.60 16.70 17.05 17.10 17.20 17.20 17.20 17.40 17.45 17.75 17.75 17.90 18.00 18.15 18.20 18.35 18.35 18.60 18.60 18.80 18.90 18.95 19.05 19.35 19.40 19.45 19.50 19.75 19.75 19.85 19.85 20.20 20.20 20.30 20.35 20.55 20.55

14

16

Price € / Piece – – – – 16.15 – 16.25 18.00 16.25 18.00 16.30 18.05 16.45 18.15 16.60 18.30 16.60 18.40 16.65 18.60 16.65 18.80 16.80 18.90 16.80 18.90 16.80 18.95 17.10 19.05 17.20 19.20 17.20 19.40 17.20 19.45 17.30 19.50 17.40 19.65 17.45 19.75 17.75 19.75 17.75 19.85 18.00 19.85 18.15 20.00 18.20 20.20 18.30 20.20 18.35 20.30 18.60 20.60 18.60 20.70 18.80 20.75 18.90 20.95 18.95 21.00 19.05 21.05 19.20 21.30 19.35 21.40 19.40 21.50 19.50 21,55 19.75 21.65 19.75 21.80 19.85 21.85 20.00 21.90 20.20 22.05 20.30 22.15 20.35 22.35 20.55 22.50 20.70 22.60 20.75 22.70 20.85 22.75 21.00 23.00 21.05 23.10 21.20 23.25 21.40 23.35 21.50 23.45 21.55 23.65 21.65 23.75 21.85 23.80 21.95 23.90

20

25

– – – – – – 22.35 22.40 22.50 22.65 22.75 22.95 23.00 23.05 23.10 23.25 23.45 23.65 23.75 23.85 23.90 24.05 24.10 24.25 24.55 24.65 24.85 24.95 26.40 26.55 26.65 26.70 27.00 27.25 27.40 27.55 27.80 28.05 28.10 28.35 28.60 28.75 29.00 29.15 29.35 29.55 29.65 29.80 30.20 30.35 30.45 30.70 30.85 31.10 31.30 31.50 31.65 31.90

– – – – – – – – – – – – 32.70 32.70 32.70 32.85 33.00 33.10 33.20 33.45 33.50 33.70 33.85 33.85 34.05 34.25 34.45 34.60 36.15 36.40 36.40 36.60 36.85 37.00 37.25 37.50 37.60 37.85 38.20 38.45 38.60 38.95 39.15 39.35 39.50 39.65 39.95 40.10 40.35 40.60 40.95 41.10 41.25 41.40 41.55 41.70 41.95 42.25

31

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Shear Connector Material Stainless Steel ( General Technical Approval Z-15.7-237 ) Fire Protection Collars JBRM

Double Shear Connector JDSD Socket (Sliding Tube)

Dowel

Price €/Piece Joint width

Price €/Piece Type JDSD 20 HF JDSD 25 HF JDSD 30 HF JDSD 45 HF JDSD 60 HF JDSD 90 HF JDSD 120 HF JDSD 130 JDSD 150 JDSD 400 JDSD 450

Dowel

Socket (Sliding Tube)

56.05 70.30 87.90 101.10 116.75 216.30 260.30 300.20 486.00 1097.30 1681.40

24.75 33.05 37.35 43.20 48.40 66.85 101.50 167.85 211.15 322.95 343.90

Dowel + Socket 80.80 103.35 125.30 144.35 165.15 283.20 361.80 468.05 697.10 1420.30 2025.30

Type JBRM 20 JBRM 25 JBRM 30 JBRM 45 JBRM 60 JBRM 90 JBRM 120 JBRM 130 JBRM 150 JBRM 400 JBRM 450

20 mm 6.70 6.70 6.70 8.35 8.70 10.40 11.70 12.40 13.10 17.85 21.25

30 mm 7.50 7.50 7.50 8.70 9.85 11.35 12.65 13.45 14.25 19.10 22.95

Ordering Example Double Shear Connector JDSD 60 HF complete (dowel element and sleeve) Type

Size

JDSD

60 HF

Ordering Example Fire Protection Collars for Double Shear Connector JDSD 60 HF in 20 mm building joint

32

Type of Dowel

Size of Dowel

JDSD

60 HF

Fire Protection Collar –

JBRM

Joint width [mm] –

20


Fire Protection Collars JBRMQ

Double Shear Connector JDSDQ Socket (rectangular sliding tube)

Dowel

Type

Dowel

JDSDQ 25 HF JDSDQ 30 HF JDSDQ 45 HF JDSDQ 60 HF JDSDQ 90 HF JDSDQ 120 HF JDSDQ 130 JDSDQ 150 JDSDQ 400 JDSDQ 450

70.30 87.90 101.10 116.75 216.30 260.30 300.20 486.00 1097.30 1681.40

Price €/Piece Socket (rectangular tube) 67.55 75.10 82.00 99.45 164.80 241.45 311.85 432.60 804.70 1003.30

Dowel + Socket

Type

137.80 163.00 183.15 216.20 381.15 501.75 612.05 918.55 1902.00 2684.70

JBRMQ 25 JBRMQ 30 JBRMQ 45 JBRMQ 60 JBRMQ 90 JBRMQ 120 JBRMQ 130 JBRMQ 150 JBRMQ 400 JBRMQ 450

Price €/Piece Joint width 20 mm

30 mm

7.75 7.75 8.70 11.70 12.25 13.20 14.35 15.40 21.00 24.90

8.35 8.35 9.85 12.50 14.00 15.05 16.65 18.25 24.10 27.95

Ordering Example Double Shear Connector JDSDQ 60 HF complete (dowel element and sleeve) Type

Size

JDSDQ

60 HF

Ordering Example Fire Protection Collars for Double Shear Connector JDSDQ 60 HF in 20 mm building joint Type of Dowel JDSDQ

Size of Dowel 60 HF

Fire Protection Collar –

JBRMQ


Joint width [mm] –

20

33

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Brickwork Support Brackets Scope of Supply ® ■ JORDAHL bracket ■ Oblique perforated plate ■ Clamping plate (U-plate)

JVA+ N, JVA+ NA, JVA+ NU JVA+ N

JVA+ NA

JVA+ NU

Ordering Example Support Brackets JVA+ NA cantilevered length 150 mm, load category 3.5; offset 100 mm

Offset Height 100 mm

Type

Cantilevered Length

JVA+

150

Type –

NA

/

Load Category

Offset

3.5

A = 100

Intermediate and special sizes available on request.

Load Cate- Cantilevered Length gory L [mm] 3.5 7.0 10.5

Price €/Piece

130 – 390 130 – 390 130 – 390

Prices on request

Angled Bracket JW Ordering Example Angled Bracket JW

Angled Bracket JW

Type JW

Angled Length

Angled Dimensions HW × BW × SW

980

L 50 × 90 × 3

–

Spezial Sizes and angled dimensions on request.

Angled Dimensions HW × BW × SW [mm] 25 × 90 × 2 30 × 90 × 3 50 × 90 × 3

Length [mm] 480 730 980

Price €/Piece Prices on request

Brickwork Support Brackets JVA+ P and PAR JVA+ P

JVA+ PAR Offset Height 100 mm

Ordering Example Brickwork Support Brackets JVA + PAR cantilevered length 150 mm, load category 3.5; offset 100 mm Type

Cantilevered Length

JVA+

150

Type

– PAR

/

Load Category

Offset

3.5

A = 100


34

Load Category

Cantilevered Length L [mm]

Price €/Piece

3.5 7.0 10.5

130 – 390 130 – 390 130 – 390

Prices on request

Material and design ■ Stainless steel corrosion resistance class III


Brickwork Support Brackets JVA+ E und EA JVA+ E

JVA+ EA Offset Height 100 mm

Ordering Example Brickwork Support Brackets JVA+ EA JVA+ EA cantilevered length 150 mm, load category 3.5; offset 100 mm Type

Cantilevered Length

JVA+

150

Type – EA

Load Category

Offset

3.5

A = 100

/


Load Category


Price €/Piece

1.8 3.5 7.0

150 – 390 150 – 390 150 – 390

Prices on request

Brickwork Support Brackets JVA+ F und FAR JVA+ F

Ordering Example Brickwork Support Brackets JVA+ F cantilevered length 190 mm, load category 7.0; angle length 1,250 mm, choosen support angle (L 70 × 100 × 3)

JVA+ FAR

Type

Offset Height 100 mm

Load Cantilevered Category Length L [mm] 3.5 3.5 3.5

130 – 390 130 – 390 130 – 390

Length [mm] 1000 1250 1500

190

–

1250

– F / 7.0

( L 70 × 100 × 3 )

Prices on request

Stainless Steel Wire ESD

JRH O

BB S

JVA +

Angle Dimensions

Price €/Piece

Suspension Loop JRH

S

CantiAngled Type Load levered Length LW CateLength L gory

JRH

Type

⵰ [mm]

Length [mm]

Price €/m

BBWW

ESD

4

3000

Prices on request

HHWW

SSWW

Ordering Example Suspension Loop JRH for L 70 × 100 ×3, thickness 115 mm Type

Type

for Angle Dimensions HW × BW × SW [mm]

JRH 0/11.5 JRH 1/11.5 JRH 2/11.5 JRH 3/11.5 JRH 4/11.5 JRH 5/11.5 JRH 6/11.5 JRH 7/11.5

for JVA + N, NA + NU 30–35 × 80–100 × 3–8 40–45 × 80–100 × 3–8 50–55 × 80–100 × 3–8 60–65 × 80–100 × 3–8 70–75 × 80–100 × 3–8 80–85 × 80–100 × 3–8 90–95 × 80–100 × 3–8


Price €/Piece

JRH 5

Thickness /

11.5

Other designs are available on request.

Prices on request

35


CONNECTION SYSTEMS


FACADE FASSADENBEFESTIGUNG CONNECTION SYSTEMS

MOUNTING TECHNOLOGY

Brickwork Support Brackets Brickwork Support Brackets JVA+ NFT, JVA+ NAFT JVA+ NFT

JVA+ NAFT Offset Height 100 mm

Ordering Example Brickwork Support Brackets JVA+ NAFT cantilevered length 150 mm, load category 7.0; offset 100 mm Type

Cantilevered Length

JVA+

190

Type

Load Category

– NAFT /

Offset

7.0

A = 100


Load Category


Price €/Piece

3.5 7.0 10.5

130 – 390 130 – 390 130 – 390

Prices on request

Prefabricated Part Holder JFT


Threaded Loop JGS

JFT

Type JFT–K 28/15 JFT–K 38/17 JFT–K 50/30

JGS

Price €/Piece

Type JGS M 8 JGS M 10

Prices on request


Ordering Example Threaded Loop JGS for load Category 7.0 Type

Thread

JGS

M8


Angled Support Brackets L-DF+, L-DN+ and L-F+ L-DF+ / L-DN+1 )

L-F+

Price €/Piece Load Cantilevered Categ. Length L [mm] LW = 500 mm LW = 750 mm LW = 1000 mm 1.5 130 – 330 Prices on request 3.2 130 – 330

Price €/Piece Load Cantilevered Categ. Length L [mm] LW = 500 mm LW = 750 mm LW= 1000 mm 1.2 110 – 130 2.1 110 – 130 Prices on request 3.2 110 – 130

1)

L-DN+ not shown

Ordering Example Angled Support Bracket L-DF+ cantilevered length = 190 mm, load category 3.2; angle length = 1,000 mm

Type L-DF+

Cantil. Length L Angled Length LW Load Category 190

–

1000

/

3,2


36


Grout-in Bracket JMK+ JMK+ N / JMK+ NA 2 )

JMK+ E / JMK+ EA 2 )

Cantilevered Length L [mm] = 110-330 Price €/Piece JMK+ E JMK+ EA 2 ) Prices on request

JMK+ N JMK+ NA 2 ) Prices on request 2)

JMK+ P / JMK+ PAR 2 )

JMK+ P JMK+ PAR 2 ) Prices on request

Offset height not shown. The corresponding angle can be found on page 34. Other designs are available on request.

Ordering Example Grout-in Bracket JMK-E shell space a = 50 mm, load category 3.5 kN Type JMK+

Cantilevered Length –

140

Type

–

E

Load Category /

3.5



Adjustment Foot

Additional Component

Depth

Load Category 3.5 7.0 10.5


Type

JVA+ZB

Wall Thickness Load Category [mm] 175 7.0 240 7.0 365 7.0


Attic Brick Anchor JAV Length [mm]

Price €/Piece

600

850

75

1100


Corresponding brick ties to be found on page 28. Prices on request

Ordering Example Attic Brick Anchor JAV Type

Depth of Construction

JAV

75

Length L /

600

Special sizes available on request.

37

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Brickwork Support Brackets and Accessories Scaffold Anchor with Inner Thread, incl. Plastic Cap JGA + Q

Ordering Example Scaffold Anchor Type JGA + Q total load Ü: 85 + 115 = 200 mm

1)

Type JGA + Q – 150 – 390


Type

Length L

JGA + Q

190


JGA + Z

Ordering Example Scaffold Anchor Type JGA + Z total load Ü: 85 + 115 = 200 mm

Price €/Piece 2 ) Prices on request

Type JGA + Z – 110 – 390

Type

Length L

JGA + Z

190


Ring Bolt FIG

Type FIG M 12 × 40 zp 1) 2)

Material and design Scaffold Anchor ■ Stainless steel corrosion resistance class III


incl. grey plastic cap incl. dowel and grey plastic cap

Bracket Bolt with Partial Thread and Nut Applicable

Type for Channel JTA K 38/17 JTA K 50/30 JTA K 53/34

JH M 12 × 70 T A4-Set JB M 12 × 80 T A4 –70-Set JB M 16 × 85 T A4-Set

Bracket LS 3.5 7.0 10.5

Price €/100 Piece Prices on request

Set including nut, wedge adjuster, U-plate

More hammer-head and hook-head bolts can be found on page 16 ff.

Compensating Bracket Type

Compensating Bracket

Material Thickness [mm]

Price €/Piece

2 3 4 5 6

Prices on request


38


Wedge Adjuster, U-Plate Type

Material Strength [mm]

Wedge Adjuster

Dowels

3.5/7.0/10.5 3.5 + 7.0

U-Plate

10.5

Type

Price €/Piece

Prices on request

Price €/Piece

Anchor bolt M 10/10 A4 Anchor bolt M 12/10 A4 Anchor bolt M 12/50 A4-Set 1 ) Anchor bolt M 12/60 A4-Set 1 ) Anchor bolt M 16/100 A4-Set 1 ) Stud anchor M 12 × 75/60 A4-Set 2 ) Stud anchor M 12 × 120/60 A4-Set 2 ) Stud anchor M 16 × 95/60 A4-Set 2 ) Stud anchor M 16 × 160/60 A4-Set 2 ) Cleaning brush BS 12 3 ) Cleaning brush BS 14 4 ) Cleaning brush BS 16/18 5 ) Relief valve

Prices on request

1)

Set incl. wedge adjuster and clamping plate Set incl. injection mortar cartridge, perforated plate and clamping plate; injection mortar cartouche and cartridge applicator gun available on request. 3) for stud anchors M 12 × 75 4) for stud anchors M 12 × 120 5) for stud anchors M16 2)

Cavity Wall Ties Type

Well – L

L

ZV – Welle L

3)

Article Name [mm]

Price 3 ) €/100 Piece

4/225 4/250 4/275 4/300 4/340 4/160 4/180 4/210 4/250 4/275 4/300 4/320 4/350

Prices on request

Sold only in complete pack.-unit. 1 pack.-unit = 250 items. Other types available on request.


Ordering Example Cavity Wall Ties L-form Type

Length L [mm]

Well – L

4/250

Insulation Retainer, Water Barrier Disc, ISO-Clip Insulation Retainer

Water Barrier Disc

ISO-Clip

Price €/100 Piece Prices on request


39


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY MOUNTING TECHNOLOGY

Mounting Channels JM W Profile

Material

Price €/m

Cutting Rate €/ Piece

black hdg A2 A4

49.50 73.75 – 426.05

11.40 11.40 – 23.25

black hdg A2 A4

44.45 67.20 – –

11.40 11.40 – –

black hdg A2 A4

27.90 42.40 – 244.25

11.40 11.40 – 13.05

black hdg A2 A4

18.75 29.55 – 189.30

7.20 7.20 – 9.25

black hdg A2 A4

12.65 19.30 – 112.20

4.50 4.50 – 7.20

Material

Price €/m


JM W 72/48

5 33 15.5

48

Bolt: JA M 20–M 30 Weight: 8.85 kg/m

72

JM W 55/42

5 26 12.9

42

55

Bolt: JB M 10–M 24 Weight: 6.57 kg/m JM W 53/34

22 10.5

34

53

JM W 50/30

2.75 22 7.9

30

50

Bolt: JB M 10–M 20 Weight: 3.25 kg/m JM W 40/22

2.4 18

6

Bolt: JB M 10–M 20 Weight: 4.96 kg/m

22

40

Bolt: JC M 10–M 16 Weight: 2.12 kg/m

JXM W Profile

JXM W 64/44

ʎ ʋʏ ʊʉ

ʍʍ

ʏʍ

Bolt: JXE M 20–M 24 Weight: 7.19 kg/m

ʋʋ

ʌʍ

ʏ

Bolt: JXB M 16–M 20 Weight: 4.65 kg/m

ʎʌ

black hdg A2 A4

49.50 73.95 – 426.05

11.40 11.40 – 23.25

black hdg A2 A4

18.75 29.55 – 189.30

7.20 7.20 – 9.25

black hdg A2 A4

12.65 19.30 – –

4.50 4.50 – –

JXM W 38/23

3 18

23

38

20 14

Bolt: JXH M 12–M 16 JH M 10–M 16 Weight: 2.42 kg/m JXM W 29/20

29 2.5 5

40

72.65 16.35 108.45 16.35 – – Prices on request

JXM W 53/34

ʍ

5.5

black hdg A2 A4

Bolt: JXD M 12 JD M 6–M 12 Weight: 1.55 kg/m


JM K Profile

Material

Price €/m


black hdg A2 A4

45.05 65.35 – 305.75

11.40 11.40 – 13.20

black hdg A2 A4

16.85 28.20 – 136.25

7.20 7.20 – 11.40

black hdg A2 A4

15.60 27.40 – –

– – – –

black hdg A2 A4

12.75 22.30 – 111.80

4.50 4.50 – 7.20

black hdg A2 A4

11.65 18.60 – –

– – – –

black hdg A2 A4

11.40 19.20 – –

– – – –

black hdg A2 A4

9.20 15.65 58.00 75.50

4.50 4.50 7.20 7.20

black hdg A2 A4

6.35 11.95 – –

4.50 4.50 – –

black hdg A2 A4

7.85 12.95 47.70 61.85

3.25 3.25 5.00 5.00

JM K 72/48

ʏ ʍʑ

ʌʌ ʊʉ

Bolt: JA M 20–M 30 Weight: 8.09 kg/m

ʐʋ

JM K 53/34

4.5 22 8


34

53

JM K 50/40 1 )

ʌ ʋʋ ʏ


ʍʉ

ʎʉ

JM K 50/30

3 22

7.4


30

50

JM K 48/26 1 )

2.5 22

6

26


48

JM K 41/41 1 )

2.5 22 7

Channel Nuts: JAM (F) 22 M 6–M 12 Weight: 2.61 kg/m

41

41

JM K 40/25

2.75 18

5.5


25

40

JM K 40/22 ʋ ʏ

ʊʑ


ʋʋ

ʍʉ

JM K 38/17 ʌʑ ʌ

ʊʐ

Bolt: JH M 10–M 16, Weight: 1.77 kg/m

ʊʑ 1)

available 6,000 mm only

Ordering Example Framing Channel JM Type

Profile Size

JM

W 50/30

Channel Length –

6,000

Material –

Associated Bolts: see pages 16-21.


hdg

Material and design ■ black = mill finish 1.0038/1.0044 ■ hdg = hot-dip galvanized 1.0038/1.0044 ■ A2 = stainless steel 1.4301/1.4541 ■ A4 = stainless steel 1.4401/1.4404/1.4571 ■ W = hot rolled ■ K = cold formed

41


CONNECTION SYSTEMS



MOUNTING TECHNOLOGY MOUNTING TECHNOLOGY

JM K Profile

36 18

20 18


black hdg A2 A4

9.40 16.30 – 72.90

– – – –


black hdg A2 A4

6.35 10.75 – –

– – – –

black hdg A2 A4

6.05 9.40 – 48.85

– – – –

black hdg A2 A4

4.90 7.95 29.80 39.40

3.25 3.25 5.00 5.00

black hdg A2 A4

4,25 6.60 24.80 39.25

3.25 3.25 5.00 5.00

black sv A2 A4

– 4.80 – –

JM K 28/28 1 )

ʋʑ ʋ


JM K 36/20 1 )

36 2.25

Price €/m

JM K 36/36 1 )

36 2.5

Material

ʋʑ ʊʋ

Bolt: JD M 6–M 12 Weight: 1.39 kg/m JM K 28/15

28 2.3

15 12

Bolt: JD M 6–M 12 Weight: 1.08 kg/m JM K 28/12

ʋʑ ʋ

ʊʋ ʊʋ

Bolt: JD M 6–M 10 Weight: 0.89 kg/m JM K 21/12 1 )

21 1.6

12 11

1)

Bolt: JG M 6–M 8 Weight: 0.58 kg/m

– – – –

available 6,000 mm only

Toothed Framing Channels JZM K Profile

■ ■ ■ ■

42

Price €/m

black hdg A2 A4

14.50 22.10 – 88.85


JZM K 41/22

2.5 7.5

Material

22 41

22

Bolt: JZS M 12–M 16 Weight: 1.88 kg/m

4.50 4.50 – 7.20

All prices incl. Foamfilling and nailholes Stock length = 6,000 mm (-0/+50 mm) Fixed length: L < 6,000 mm Weight per metre for mill finish version (for galvanized profiles: weight per metre +10 %)


Slotted Back Channel Type JML K Profile

ʌ

Price €/m

Cutting Rate €/Piece

JML K 50/40 1 ) ʍʉ

ʋʋ ʏ

ʎʉ

Bolt: JB M 10–M 20 Weight: 3.25 kg/m LL 11 × 40 mm

black

16.85

–

hdg

28.60

–

A4

–

–

JML K 41/41 1 )

ʋʎ ʋʋ ʐ

ʍʊ

ʍʊ

Channel Nuts: JAM (F) 22 M 6–M 12 Weight: 2.47 kg/m LL 11 × 40 mm

black

12.95

–

hdg

20.75

–

A4

–

–

JML K 40/25

ʋʐʎ ʊʑ

ʎ

Material

ʋʎ

ʍʉ

Bolt: JC M 10–M 16 Weight: 1.86 kg/m LL 11 × 40 mm JML K 36/36

ʋʎ ʊʑ

ʌʏ

ʌʏ

ʋʑ ʊʋ

4.50

17.85

4.50

A4

78.65

7.20

1)

Bolt: JH M 10–M 16 Weight: 2.09 kg/m LL 11 × 40 mm

black

10.50

–

hdg

17.35

–

A4

75.85

–

Bolt: JD M 6–M 12 Weight: 1.28 kg/m LL 11 × 40 mm

black

6.90

–

hdg

11.40

–

A4

51.85

–

JML K 28/15

ʋʑ ʋʌ

11.40

hdg

JML K 28/28 1 )

ʋʑ ʋ

black

ʊʎ ʊʋ

Bolt: JD M 6–M 12 Weight: 1.02 kg/m LL 9 × 25 mm

black

6.05

3.25

hdg

9.15

3.25

A4

42.65

5.00

1)

available 6,000 mm only LL = Slot Size

Toothed Slotted Back Channel JZML K JZML K 41/22

ʋʎ ʐʎ

ʋʋ ʍʊ

ʋ

black hdg A4

Bolt: JZS M 12–M 16 Weight: 1,74 kg/m LL 11 × 40 mm

18.55 24.10 92.15

4.50 4.50 7.20

LL = Slot Size

Material and design ■ black = mill finish version 1.0038/1.0044 ■ hdg = hot-dip galvanized 1.0038/1.0044 ■ sv = pre-galvanized ■ A2 = stainless steel 1.4301/1.4541 ■ A4 = stainless steel 1.4401/1.4404/1.4571 ■ W = hot rolled ■ K = cold formed

■

Spacing of the slotted hole centres on perforated channel for installation: 60 mm (other slotted holes on request)

Ordering Example Slotted Back Channel JML Type JML

Profile Size –

K 40/25

Channel Length –

6,000

Material –

hdg

Associated Bolts: see pages 16-21.


43

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Service Technical Advice In addition to the technical information in our brochures and on our website, our engineers will make static calculations and provide technical advice on request. Installation Instructions / Videos In order to achieve optimum results from the use of JORDAHL® products, various installation instructions and videos are available to download. Tender Texts For all of the JORDAHL® product ranges completed tender texts are available. These contain all of the relevant technical information with regard to material, bearing capacity and sizes together with notes on installation. The data can be exported, e. g. in GAEB-format, and sent as an e-mail attachment or stored as a data file.

Information at www.jordahl.de. Queries/orders on +49-30-68283-433 or [email protected].

Additional ordering information All deliveries are made solely in accordance with the Terms of Delivery and Payment dated October 2012 (see page 46). Prices The list prices are ex works, excluding packaging, plus the applicable statutory rate of VAT. Surcharges for Small Quantities For consignments with a value of less than € 150,– we charge a small quantities surcharge of € 25,–. For incomplete pack.-units we charge a handling fee of 20 % of Netto value. Surcharges In addition, the list prices are subject to the alloy surcharges, steel surcharges and other surcharges applicable on the date of delivery.

Return of Goods Goods may only be returned by agreement and in resaleable condition. A Re-stocking fee of 15 % of net value will be invoiced. Standard Freight Charges for Deliveries within Germany Delivery of all JORDAHL® products with a net value starting from € 2.000,– are carriage free. ■ Parcel service (max. 30 kg): € 12,– ■ Shipping items (< € 1.000,– net contract value) € 90,– ■ Shipping items (> € 1.000,– up to € 2.000,– net contract value) € 50,– ■ Fixed-date/express shipments: priced on a time and materials basis ■ Long and oversized shipments: priced on a time and materials basis Note When using our materials, please observe the installation instructions or the relevant notes on how to use them in our catalogues.

44


Advice The JORDAHL Experts You are always well advised when you choose JORDAHL products. Whether from the point of view of static calculations, general technical advice/service or the development of customised solutions – competent and experienced JORDAHL product specialists offer you state-of-the-art, flexible and customised solutions for all your needs.

Throughout Europe and around the world JORDAHL products have proven themselves in use around the world because German quality standards are in demand everywhere. We can also guarantee perfect delivery of our products to you thanks to our reliable logistics partners and a perfectly functioning logistics chain (certified in accordance with DIN EN ISO 9001), because personalised, high-quality, customer-focused service is essential to us when it comes to delivery, too.

Design Software Easy-to-use design software is available to help in identify the best products for individual installation situations. This software is available to download free of charge.

Tender texts available on www.jordahl.de


45

CONNECTION SYSTEMS




MOUNTING TECHNOLOGY

Terms of Delivery and Payment The General Terms and Conditions of Business in their latest version always apply. The following Terms of Delivery and Payment are an integral part of all the vendor‘s supply contracts. If the purchaser has any conditions of purchase, these do not form part of the contract. The conditions also apply to any followup business, even if it has not been explicitly agreed that they should apply. Section 1: Subject of the Contract a) Our proposals, plans, drawings and sketches are subject to alteration. Any settlements or other agreements are not binding unless confirmed in writing by us. b) We are not bound by any errors made in quotations, invoices etc. - especially typing errors - and we are not obliged to provide compensation. This does not affect our liability for intent or gross negligence. c) Any proposals, plans, drawings and samples or other material subject to copyright must not be made available to third parties, and the vendor retains the ownership and proprietary rights. Section 2: Prices and Terms of Payment a) Our prices are ex works in Berlin or from the distribution centre, exclusive of packaging. VAT at the legal rate will be added to these prices. The final price is determined by prices on the date of delivery. Where the invoiced amount is less than €150, we charge a small quantity surcharge of €25. b) We give a 2 % discount for payment within 14 days of the date of invoice, with the date of payment being the date on which the payment arrives in the vendor‘s account. Where we accept bills of exchange or cheques, this is subject to their safe receipt, minus expenses, and with the value date being that on which the remittance becomes available to us. In the case of payment by cheque or bill of exchange, the reservation of ownership described in Section 3 does not expire until the cheque or bill of exchange is finally cashed on the due date. c) In the event of delayed payment, the vendor is entitled to charge the legal rate of interest on arrears or at least 9 % p.a. This does not affect the right to prove differing losses - if the legal rate of interest is not being applied. If the purchaser is in arrears with one payment, then all the vendor‘s claims, including those deferred or not yet due, become due immediately. This also applies where a payment is stopped or where an application has been made to open bankruptcy proceedings. In the event of delayed payment, the vendor is entitled to make future deliveries dependent on settlement of the outstanding claims. If payment is delayed, any reductions or discounts that were given no longer apply. d) If the purchaser fails to comply with the terms of payment, we are entitled, in addition to all our other rights, to forbid the selling on or processing of the goods that have been delivered, and to demand that they be returned or that the possession in law of the delivered goods be transferred at the purchaser‘s expense, and to cancel the authorisation to collect payment as described in Section 3e. The purchaser hereby agrees to the delivered goods being taken away in such cases. e) We are entitled to claim the usual type and scope of securities for our claims, even where these are conditional or limited in time. f) Where the goods are sold in a diff erent currency, the purchaser bears the exchange rate risk from the time when the contract is signed. Section 3: Reservation of Ownership a) The delivered goods remain the property of the vendor until completion of full payment of the purchase price and of any other, including subsequent, claims arising and due to the vendor from the purchaser as a result of this business relationship. b) The purchaser is only entitled and authorised to process or sell on goods subject to retention of title in the proper course of business and only on condition that the provisions under letters c) and d) are observed. The purchaser is not entitled to use the goods subject to retention of title in any other way, or the claims which he has assigned or has to assign to the vendor under letter d). c) If the delivered goods are processed by the purchaser to make a new product, then the further processing shall be on the vendor‘s behalf. The purchaser is not entitled to acquire ownership under Section 950 BGB (German Civil Code). If the product is processed with other goods not belonging to the vendor, then the vendor acquires co-ownership of the new product in proportion to its value. The new product is regarded as an article subject to retention of title. d) The purchaser hereby assigns to the vendor his claims arising from any onward sale of the goods subject to retention of title, up to the sum corresponding to the value of the goods subject to retention of title. The value of the goods subject to retention of title, for the purpose of these provisions, is the value on the vendor‘s invoice plus a security charge of 20 %. e) The vendor authorises the purchaser to collect claims arising from the onward sale, retaining the right to revoke this authorisation. The vendor will not make use of their own authorisation to collect, provided that the purchaser meets his payment obligations. On request, the purchaser must give the vendor the names of the debtors for the assigned claims and tell the latter that the claim has been assigned. The vendor is hereby authorised to notify the debtors of the assignment process on behalf of the purchaser. f) If the value of the securities given to the vendor exceeds the claims by more than 20 %, then the vendor is obliged, at the request of the purchaser, to reassign or release them, at his discretion. g) The purchaser must inform the vendor promptly of any enforcement proceedings or other measures by third parties which could have a detrimental eff

46

ect on the vendor‘s rights over the goods subject to retention of title or to assigned claims, in law or in fact, and hand over the materials that are necessary for an intervention. In the event of any attachment or other seizure, the purchaser is obliged to point out the vendor‘s ownership of the goods to the enforcement officers and to notify the vendor within three days, by sending a copy of the record of attachment. The purchaser bears the costs of defending the vendor‘s rights of ownership. h) The provisions of these paragraphs apply equally if the purchaser disposes of the goods not by a sale but under a service contract or a contract for works, labour and materials. Section 4: Delivery Times, Delivery Deadlines a) Delivery times start from the date of our order confirmation. They are nonbinding and are subject to the vendor himself being supplied correctly and on time. Other conditions apply only if the vendor guarantees binding delivery times in writing. The time and date of delivery is regarded as being the time at which the goods are dispatched from the factory or distribution centre. b) Delivery times and deadlines shall be extended - regardless of our other rights arising from arrears - by the length of time for which the purchaser is in arrears with payment to us. c) Our compliance with delivery times presupposes that our working processes are uninterrupted and that our systems of dispatch and delivery are unimpeded. Incidences of force majeure, strikes, traffic disruption, shortages of transportation, heating oil, raw or auxiliary materials or operational stoppages of any kind at our own works or at works connected with fulfilling the terms of the contract, or problems caused by official decrees which make delivery difficult exempt the vendor from meeting his delivery obligations for as long as they take effect, without the purchaser being entitled to withdraw from the contract. d) If we fall into arrears, then the purchaser may, following the expiry of a suitable period of grace which they grant us, withdraw from the contract if we have not reported that the goods are ready for dispatch by the end of that period. Section 5: Dispatch and Transfer of Risk a) Goods reported as being ready for dispatch must be requested promptly. b) Goods are delivered on a freight collect basis from the factory in Berlin or the distribution centre, unless agreed otherwise. Packaging costs will be charged for. Delivery by post will be solely as a parcel or with postage paid, and postage costs will be charged to the purchaser. c) Once the goods are handed over to the carrier or transport company, or at the latest when they leave the factory or warehouse, the risk transfers to the purchaser. Section 6: Faults a) Whether the goods are in the condition required by the contract is determined at the time at which they leave the factory or warehouse. b) We must be notified promptly in writing of any defects, and any further processing must cease immediately, certainly no later than within five days of receipt of the goods. c) If the goods are faulty, the vendor complies with the guarantee by rectifying these faults free of charge and/or supplying a free replacement, at his discretion (to remedy the defect). Provided that the vendor fulfills their obligations to remedy the defect, the purchaser does not have the right to demand any reduction in the payment or cancellation of the contract, unless the attempted remedy fails. d) In the event of any breach of obligations for which the vendor is responsible, claims for compensation, whether contractual or non-contractual, can only be made where there was intent or gross negligence. This does not apply where there is injury to life and limb or health, provided the purchaser is not a corporate entity. Section 7: Place of Performance / Place of Jurisdiction / Right of Off Set a) The place of performance and place of jurisdiction for both contracting parties is the headquarters of JORDAHL GmbH (Berlin), provided the purchaser is a registered trader. b) The purchaser‘s right to offset claims with counter-claims is only permissible in the case of legally confirmed or undisputed claims. Section 8: Miscellaneous a) Excess quantities The purchaser is obliged to accept any excess quantity of goods up to 10 % of any particular item, at the contractual price. b) Part-deliveries We are entitled to make part-deliveries. This does not affect the price. Each partdelivery is regarded as a separate transaction. c) Application of German law All legal relationships between ourselves and the purchaser are governed exclusively by German law. UN Sales Law cannot be applied. d) Written form There are no verbal side agreements. All agreements made in the context of this business relationship must be made in writing. The same applies to the waiver of the requirement for written form. e) Partial ineffectiveness If certain provisions of these terms and conditions of delivery and payment are wholly or partially ineffective, this does not affect the effectiveness of the remaining provisions. The ineffective provision should be replaced by one coming closest to its intended economic purpose. October 2012


Index A Additional Component Anchor Channels JTA, JXA, JZA Anchor Channel Pricing Angled Bracket JW Angled Support Brackets L-DN / L-DF / L-F Assembly Aid JDA-Q Attic Brick Anchor JAV

I 37 9, 10, 15 11 34 36 30 37

16 – 21 38 28 28 34 – 39

C Cavity Wall Ties Channel Nuts JAM Clamp Connections JSV Clamping Claw and Adaptor SKU Clamping Plates Clamping Plate (U-plate), Insulation Retainer Curved Anchor Channels JTA, JXA, JM, JXM Compensating Bracket Coupling Sleeve Round

39 22 24 26 26 39 15 38 23

D Depth Adjustment Double-Notch Toothed Bolts JKB, JKC Double Shear Connector JDSD/JDSDQ Dowels

37 21 32 39

E Edge Protection Angle JKW End Anchors for Anchor Channels End Anchor for Profiled Metal Sheet Channels JTB-EA, JTB-EB Eyelet Sockets ÖM

14 25

32, 33 27

G Grout-in Brackets JMK+

37


22 10

M 15, 40 – 42

N Notch Toothed Bolts

22

P Prefabricated Part Holder JFT Pressure Bolts JDS Profile Brackets JK Profiled Metal Sheel Channels JTB

36 24 14 12

R Railing Fastening JGB Ring Bolt / Frame Eyelet FIG Ring Nuts RM

13 38 24

S Scaffold Anchor JGA+Q, JGA+Z Self Locking Nut with Serrated Bearing Shear Reinforcement JDA-S Sliding Sleeve Spacers AH-DA, FBA, AH-FT Spring Washer Stainless Steel Wire ESD Studrails JDA, JDA-S Suspension Loop JRH

Thin-Bed Brick Tie Anchors JMA-D Threaded Loop JGS Threaded Rods GS Timber Fixing Strap JNA Toothed Bolts JXB, JXD, JXH, JZS, JXE, JKC Toothed Channels JXA, JXA-PC, JZA Toothed Straps JVB-Z, JVB-ZS Turnbuckles SP

38 23 30 – 31 28 31 23 35 30 – 31 35

28 36 24 29 20 8, 10 25 24

W Washer Water Barrier Disc Wedge Adjuster

H Hammer-head Locking Plates Hexagonal Coupling Sleeves Hexagon Bolts Hook-head Locking Plates

Locking Plates JGM Loop Channels JSA

T 12 24

F Fire Protection Collar JBRM, JBRMQ Frame Shoe JG

39

L

Mounting and Framing Channels JM, JXM, JML, JZML

B Bolts JA, JB, JE, JC, JH, JD, JG Bracket Bolt Brick Tie Anchor JMA Brick Tie Channels Kt Brickwork Support Brackets JVA

Iso-Clip

23 39 39

22 23 23 22

47



JORDAHL GmbH Nobelstr. 51 12057 Berlin Germany Tel + 49 30 68283-02 Fax + 49 30 68283-497 www.jordahl.de [email protected]


MOUNTING TECHNOLOGY

LIT-PL2013-EN / 1. / 01-2013

CONNECTION SYSTEMS