• Types II, III and IV distributions for up to 4:1 spacing provides greater coverage and fewer fixtures to install
• 45w – 18 LEDs – 3311 lumens – replaces 250w MH
• Acrylic diffuser included for reduced brightness applications
• Battery backup option for egress applications – provides 1 fc average over 16' L x 48' W at 11' mounting height • Cold pack for operation down to -20˚C
• Designed for both recessed j-box or surface conduit wiring† • Die-cast aluminum construction with architectural styling
• Zero uplight, neighbor friendly, IDA approved
• Dark bronze, black, gray, white, platinum and custom color finishes available
• DesignLights Consortium (DLC) listed
• Photocontrol option for dusk-to-dawn control
• Available in 3000K, 4200K and 5100K LEDs
• Listed to UL1598 for use in wet locations
High Power LEDs
Battery Backup
Battery backup option provides 1 fc average over 16’L x 48’W at 11’ mounting in battery mode
7, 9, 12 or 18 high powered LEDs with precision lenses for optimal photometric performance. Provides excellent uniformity and spacing up to 60ft at mounting heights from 10-15ft.
Photo Control
Acrylic Diffuser
Frosted acrylic diffuser accessory – included with fixture! Softens output improves uniformity and protects LED lenses. Use near pedestrian entry applications or where low brightness is preferred.
Optional factory installed button photo controls for added energy savings
Quick Mounting
Quick mount – easy mounting without opening fixture. Attach adapter plate to wall, connect wires, hang fixture and tighten set screws.
LED Product Partner
* Projected per IESNA TM-21-11 1 Over traditional sources † Conduit wiring option not available in BBU unit
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
LNC2 Family Lumen Comparison – performance for every entry/perimeter application
LNC2-18L
3311 Lumens
Equivalency
250w MH
LNC2-12L
2420 Lumens
Equivalency 150-175w MH
LNC-9L
1745 Lumens
LNC-7L
1389 Lumens
Equivalency
70w MH
Equivalency
50w MH
The compact LED LNC2 family offers five different lumens packages for maximum light level and mounting height flexibility. LNC2 is designed for perimeter illumination for safety, security and identity. Typical mounting height is up to 15 feet with 50-60ft fixture spacing (without acrylic diffuser) and 40ft spacing with acrylic diffuser installed. LNC2 is available with battery backup in LNC2-12L units for egress applications.
LNC2 PERFORMANCE Without acrylic diffuser
Without acrylic diffuser
LNC2-12LU-5K-3.IES
LNC2-18LU-5K-3.IES 36'
42'
24' 12'
12' 24' 42'
36'
12'
36'
.2fc
15'
.5fc
2fc
12'
24'
24'
12'
42'
12' 1fc
42'
36'
.5fc
2fc
1fc
24'
36'
24' .2fc
12'
36'
LNC2-12 BATTERY BACKUP MODE PERFORMANCE Provides Life Safety Code average illuminance of 1.0 fc. Assumes open space with no obstructions and mounting height of 11'. Diagrams for illustration purposes only, please consult factory for application layout.
Targeted Light Level Coverage Single 1 fc 1 fc Unit installation Average Minimum
Length Width
Side View
16' 48'
15' 24'
Mounting Height 11'
3/4 View Length Spacing 44'
Width Mounting Height 11'
Targeted Light Level Coverage Twin 1 fc 1 fc Unit installation Average Minimum