All designs and scaled drawings shall remain the property of STARFIRE LIGHTING, INC., and may not be reproduced or transmitted without expressed written consent.
LED Light Bar
Job Name:
Fixture Type:
Series LLB
L ed linear L I G H T I N G Sy stem
1.1"
0.94"
0-90°
Adjustable angle 0-90°
0.94"
Perspective View
0-90° 1.1" Optional Components
Ordering Guide
LLB-____ /____-_____-W-1
Fix Length
Wattage
Length / Wattage
12 18 24 32
/ / / /
Color Temp*
Color Temp*
Finish
Finish
7W 930 (3000K) W White 10W 935 (3500K) 13W 17W
72" Power Cord LLB-P7N (White) Portable Cord and Plug Set LLB-PCN (White) Junction Box with KO's and Rocker Switch LLB-JBN (White) Flexible Cable Connectors (for linkable connection)
LED Light Bar is a 120 volt, low profile linear lighting system with frosted lens. Modular design for maximum flexibility and quick installation allows for continuous run lengths using In-line Connectors or optional Flexible Cable Connectors.
Features
- LED Type: Ultra Bright 2835 SMD - In-line Connector for linkable end-to-end connection. - Linkable to form varying lengths. - Fully dimmable with electronic low voltage dimmers (Leviton), consult factory for others. - Hardwire or portable (Portable Cord and Plug Set, sold separately).
Dimensions: (Spec)"L x 1.10"W x 0.91"H Weight: Approx. 0.25 lbs. per linear foot Max. Continuous Run Length: 45ft Wattage: 7 W/Ft Lumen Output: 500 Lm/Ft Lamp Life: 50,000+ hours CRI: 95+ Beam Angle: 120°
Electrical Data Length
12.3” 18.3” Wattage 7 10 Total Lumens 500 725
24.3” 13 975
32.8” 17 1,250
Electrical
- Power consumption: Per specification. - 300W max. connected load per power feed. - Ambient temperature 90 °F. maximum.
Mounting
- 0°- 90° adjustable and lockable mounting brackets included. Contact factory for special conditions.
* For other color temperatures, consult factory. All designs and scaled drawings shall remain the property of STARFIRE LIGHTING, INC., and may not be reproduced or transmitted without expressed written consent. STARFIRE LIGHTING, INC. reserves the right to make changes on approved designs to facilitate manufacturing methods to the extent that such changes do not compromise design integrity.
