Magellan All-in-one Wireless Security System

Magellan All-in-one Wireless Security System The following document provides a simplified overview of the installer menus for the MG6250 console. Use this document only as a quick help guide to identify where certain settings/options are located within the menus. For more detailed information and step-by-step procedures, refer to the MG6250 Menu Programming Guide. Please visit Paradox.com for the latest releases of the various MG6250 documentation. Ready to Arm menu

01-BYPASS 02-MESSAGES 03-ALARM CLOCK 04-CHIME ZONE 05-ALARM MEMORY 06-HISTORY LOG 07-SYSTEM TEST 08-SYSTEM SETUP ok

exit

next

Enter Installer Code (0000)

01-Zones ok

next

exit

02-Areas ok

next

exit

next

next

next

next

next

next

next

exit

Record a voice tag

Enter repeater name

exit

Modify/Add sirens (max. 4)

Record a voice tag

Enter siren name

Record a voice tag

Enter doorbell name

Select tone

exit

Modify/Add doorbells (max. 2)

Modify entry delay 1

Modify entry delay 2

Modify exit delay

Modify bell cutoff delay

Modify user call list (max. 8 tel. #s)

Configure SIM cards (max. 2)

Set-up account

Configure installer code

Configure maintenance code

Configure callback PC Telephone #

View signal strength

Test reporting

Test zones

Modify/Add console path

Add keypad paths (max. 4)

Displays main firmware version (FW)

Displays RF firmware version (RF)

exit

exit

10-Installer ID ok

next

exit

11-System Test ok

next

exit

12-StayD ok

next

exit

13-Version Number ok

next

exit

14-Advanced Prog ok

next

Modify areas 1 and 2

Modify/Add repeaters (max. 4)

09-Communicator ok

Enter system/ site name

exit

08-Delays & Tones ok

Record a voice tag

Enter keypad name

07-Doorbells ok

Modify system/site

Record a voice tag

06-Sirens ok

Add a zone label

Modify/Add keypads (max. 4)

05-Repeaters ok

Record a voice tag

exit

04-Keypads ok

Define zone (wireless or hardwired)

Modify/Add outputs (max. 8)

03-Outputs ok

Modify/Add zones (max. 64)

exit

Enter section number

Define output (wireless or hardwired)

Record a voice tag

Displays panel’s serial number (S/N)

Enter output name

Assign to areas

Set-up activation types

Select zones

Select outputs

Select keypads

Modify bell squawk

Modify pre-alarm delay

Configure service telephone #

Test remotes

Displays hardware version (HW)

For a listing of section numbers, please refer to the MG6250 Section Programming Guide.

Set-up remote access

Test hardware

Displays engineering change order number (ECO)

Magellan All-in-one Wireless Security System The following document provides a simplified overview of the user’s menu programming for the MG6250 console. Use this document only as a quick help guide to identify where certain settings/options are located within the menus. For more detailed information and step-by-step procedures, refer to the MG6250 User Manual. Please visit Paradox.com for the latest releases of the various MG6250 documentation. Ready to Arm menu

Bypass / unbypass zones

-BYPASS ZONES ok

next

exit

-MESSAGES ok

next

exit

-ALARM CLOCK ok

next

exit

-CHIME ZONE ok

next

next

next

exit

next

Set alarm time

Edit chime

Set chime label

Select alarm tone

View event list

exit

Enter User Master Code (1234)

-SYSTEM TEST ok

Turn alarm ON or OFF

View past alarms

-HISTORY LOG ok

Record a message

exit

-ALARM MEMORY ok

Play message

exit

View signal strength

Test reporting

Test zones

Test remotes

Test hardware

-SYSTEM SETUP ok

next

exit

Enter User Master Code (1234) -Users ok

next

exit

-Lost Remote ok

next

exit

-Communicator ok

next

exit

-Time and Date ok

next

exit

-Delays/Tones ok

next

exit

-Auto Arming ok

next

next

exit

-Language ok

next

exit

-LCD Display ok

next

exit

-Set Tel. Ring ok

next

exit

-Version Num. ok

next

exit

-Demo Mode ok

next

exit

Add users (max. 16)

Choose user code

Record voice tag

Add label

Program remote

Assign to areas

Get all remotes

Modify user call list (max. 8 tel. #s)

Configure SIM cards (max. 2)

Set time format

Set time

Set date

Modify entry delay 1

Modify entry delay 2

Modify exit delay

Modify bell cutoff delay

Modify bell squawk

Modify pre-alarm delay

Select area

Set auto arm (OFF, stay, sleep, full)

Modify zone labels

Modify area labels

Modify output labels

Modify keypad labels

Modify repeater labels

Modify siren labels

exit

-Change Labels ok

Modify/Add master

Select language

Adjust contrast

Adjust brightness

Set ring tone

Set ring volume

Displays main firmware version (FW)

Displays RF firmware version (RF)

Starts demo mode

Set ring count

Displays panel’s serial number (S/N)

Displays hardware version (HW)

Displays engineering change order number (ECO)

Demonstrates greeting, flash display, entry/exit tones, chime tones, arming siren, disarming siren, exit delay, and ac/battery voltage.

Modify doorbell labels