Manufacturer Product Overview

e l l i v n e e Gr Specialist Electrical Distributor Industrial | Drives | Controls

Manufacturer Product Overview Industrial Overview

G

Variable Speed Drive Training

Greenville Electrical was the first appointed Danfoss Drives PartnerNet Competence Centre in the UK and is currently the only one on the island of Ireland. We carry large quantities in stock, and can offer outstanding customer service, providing sales, support, commissioning and maintenance. Our dedicated service division can offer maintenance packages and give training to your engineers, to help give piece of mind and reduce the down time associated with production.

Greenville Specialist Electrical Distributor Industrial | Drives | Controls

NI & UK phone: 028 9064 5060 ROI phone: 1890 719 312 www.greenvilleidc.com Email: [email protected]

Manufacturers


Greenville Electrical 16 Cedarhurst Road Belfast, BT8 7RH NI & UK phone: 028 9064 5060 ROI phone: 1890 719 312 www.greenvilleidc.com Email: [email protected]

G

Table Of Contents Pages

Manufacturers 1.

Danfoss Drives

5 to 12

2. Danfoss IA

13

3. Danfoss Commercial Heating

14 & 15

4. Dorman Smith

16 & 17

5. Crompton Instruments

18

6. Finder

19

7.

20

Salzer

8. Schneider Industry

21 & 22

9. Schneider Power Distribution

23 & 24

10. Fuss EMV

25

11. Legrand

26

12. Marechal

27

13. Technor

28

14. Contrinex

29 & 30

15. Rechnor Sensors

31 & 32

16. Hach

33 & 35

17. MJK

36 & 37

18. Mastervolt

38 & 39

19. Tofco

40 & 41

Don’t forget you can follow us on social mediaFacebook, Twitter and LinkedIn

e l l i v n e e r G Specialist Electrical Distributor Industrial | Drives | Controls

Irelands only Danfoss Competence Centre

G

We became a competence centre for Danfoss after building a stable relationship with the company, we can train your staff on your premises or in our facilities, for the instalment and operations of the technologies Danfoss have to offer. Building such a close relationship with Danfoss has allowed us at Greenville to offer unique and highly valued prices for the entirety of the Danfoss product range. For information on prices and availability, or on which drive suits your kW and IP rating contact our sales team directly.

Danfoss Drives The VLT® Micro Drive FC 51 The VLT® Micro Drive FC 51 is small and yet powerful and built to last. Panel space can be saved and installation costs reduced thanks to its compact size and minimal commissioning requirements.

Applications:

Conveyors, pumps, fans, mixers, extruders, palletizers, packaging machines and other industrial appliances.

The VLT® Midi Drive FC 280 The VLT® Midi Drive FC 280 delivers flexible and efficient motor control for use in a wide variety of automation and machine-building applications in the food and beverage, material handling and processing industries.

Applications: Conveyors, mixers, packaging systems, pumps, fans and compressors.

The VLT® Lift Drive LD 302 The VLT® Lift Drive is designed to provide reliable operation and excellent ride comfort for a minimum of 2.1 million cycles when running at an ambient temperature of below 45°C. Ideal for new projects or for retrofits, it operates without motor contractors and can be quickly and easily commissioned in less than 10 minutes.

Applications: Mid-range to high-rise residential and commercial building lifts, industrial site freight lifts, mine-shaft lifts, ‘recreational’ applications, such as ski lifts, boat lifts, aircraft lifts or elevators, vehicle lifts, walkways.

The VLT® Refrigeration Drive FC 103 The VLT® Refrigeration Drive FC 103 is designed to help significantly reduce the lifecycle costs of your refrigeration systems. It offers efficiency- and reliability-enhancing features, integrated process control functions and a commissioning environment specially designed to meet the needs of refrigeration applications. It also features a setup Wizard which uses common refrigeration terms. This makes installation and commissioning easy and safe for refrigeration technicians and installers.

Aplications:

Pumps, fans, compressors, condensers and evaporators.



Danfoss Drives

G

If we had to sum up Danfoss Drives in one word, that word would be ‘passion’. We are driven by drives and passionate about providing a competitive edge in key applications across various industries. This passion is clearly visible in many areas of our business. We live and breathe drives. Danfoss Drives is unique in that it is 100% focused on developing, manufacturing and supplying AC drives.

The VLT® AutomationDrive FC302 / FC301 The VLT® AutomationDrive is designed for variable speed control of all asynchronous motors and permanent magnet motors. It comes in a standard version (FC 301) and an advanced high dynamic version (FC 302) with additional functionalities. It helps save energy, increase flexibility, reduce costs related to spare parts and servicing, and optimize process control on any industrial machine or production line. Applications: Conveyors, positioning and synchronizing, cranes, mixers, centrifuges and palletizing and packaging machinery.

The VLT® HVAC Drive FC 102 The VLT® HVAC Drive is designed to bring optimized process control to all heating, ventilation and air conditioning (HVAC) applications. Easy to use and with built-in intelligence, the drive is fast and cost-effective to commission. It features a wide range of functions specifically developed for use with, for example, pumps, fans and compressors to save energy, meet environmental regulations and reduce costs in modern buildings. Aplications: Pumps, fans, compressors.

The VLT® Aqua Drive FC 202 The VLT® AQUA Drive is designed to provide the highest level of performance of AC-motor-driven water and wastewater applications. Featuring a wide range of powerful standard features, which can be expanded with performance-improving options, the drive is equally suited to both new and retrofit projects.

Aplications: Centrifugal pumps and blowers, positive displacement blowers.

Greenville Electrical was the first appointed Danfoss Drives PartnerNet Competence Centre in the UK and is currently the only one on the island of Ireland. We carry large quantities in stock, and can offer outstanding customer service, providing sales, support, commissioning and maintenance. Our dedicated service division can offer maintenance packages to help give piece of mind, reducing the down time associated with production.



Danfoss Drives - Filters Power options are designed to ensure the best possible reliability and efficiency for AC drives in system configurations where high attention is paid to power quality.

VLT® Advanced Active Filter AAF 006 The flexible filter for central/decentral harmonic mitigation. Applications: A range of applications for the water and wastewater, marine, oil and gas and mining industries.

VLT® Advanced Harmonic Filter AHF 005 010

Compared to traditional harmonic trap filters they offer a smaller foot print and higher harmonic reduction. The solution is available in two variants, AHF 005 and AHF 010. When connected in front of a Danfoss VLT® drive, the harmonic current distortion generated back to the mains is reduced to 5% and 10% Total Harmonic Current Distortion at full load. With a >98% efficiency the passive Advanced Harmonic Filters offer cost effective and very robust harmonic solutions specifically for power up to 250 kW. As stand-alone options the Advanced Harmonic Filters feature a compact housing that is easily integrated into existing panel space. This makes them well-suited for retrofit applications with limited adjustments of the frequency converter.

VLT® Sine-wave Filters MCC 101 VLT® Sine-wave Filter MCC 101 output filters are low-pass filters that suppress the switching frequency component from the drive and smooth out the phase-to-phase output voltage of the drive to become sinusoidal.



G

Danfoss Drives - Filters

G

Power options are designed to ensure the best possible reliability and efficiency for AC drives in system configurations where high attention is paid to power quality.

VLT® dV/dt Filter MCC 102 VLT® dV/dt Filter MCC 102 are differential-mode low-pass filters which reduce motor terminal phase-to-phase peak voltages spikes and reduce the rise time to a level that lowers the stress on the insulation of motor windings.

VLT® Common Mode Filters MCC 105 VLT® Common Mode Filters MCC 105 (HF-CM) cores are special nanocrystalline magnetic cores which have superior filtering performance compared to regular ferrite cores. They act like a common-mode inductor (between phases and ground).

Danfoss Decentral Drives

VLT® Decentral Drive FCD 302 Applications: With its IP 66 enclosure, the VLT Decentral Drive FCD 302 is ideal for conveyor applications, sorter systems, installations in wash-down areas or widely distributed applications with a large number of drives in, for example, the food and beverage and materials-handling industries.

VLT® OneGearDrive The VLT® OneGearDrive® is a highly efficient, permanent magnet, three-phase synchronous motor coupled with an optimized bevel gear box which helps to optimize plant productivity and reduce energy costs. With only one motor type and three available gear ratios, the motor concept covers all typical versions of conveyor drives commonly used in the food and beverage industry. The reduced range of physical configurations reduces costs and simplifies spare-part storage. Uniform mechanical dimensions reduce engineering and installation time and costs. The drive comes in two versions: Standard for use in dry and wet production areas and Hygienic for use in wet areas and environments with high cleaning intensity including aseptic and cleanroom production areas.



Danfoss Decentral Drives

G

Drive Motor FCP/FCM 106 The VLT® DriveMotor FCM 106 is delivered factory mounted to either an IE4-rated permanent magnet (PM) motor or IE2-rated induction motor (IM). Alternatively, for full flexibility in motor choice, system design and energy efficiency, choose your own motor and attach the standalone VLT® DriveMotor FCP 106. Installation costs and system complexity are significantly reduced thanks to the compact design of the VLT DriveMotor FCM 106. Costs are further reduced as the need for cabinets and long motor cables are eliminated. Installation is simple due to the integrated cooling system and an individually adjustable motor adapter plate. The standalone VLT DriveMotor FCP 106 provides you with a high level of flexibility and stable, energy-efficient operation as the drive automatically sets the optimal parameters for the attached motor. Applications: Pumps, fans and conveyors.

VLT® Integrated Servo Drive ISD 410 System The integration of a servomotor and electronic drive unit in the same housing reduces costs, improves flexibility and makes this drive system ideal for applications that require high flexibility and dynamics such as those in the food and beverage and packaging industries. The decentralization of the drive unit offers benefits in mounting, installation and operation. And, depending on the application, up to 60 drives can be integrated into the servo drive system. Applications: Various kinds of applications in the packaging and food and beverage industries.

VLT® Integrated Servo Drive ISD 510 System The VLT® Integrated Servo Drive ISD® 510 is a high-performance decentral servo motion solution that comprises a central power supply VLT® Servo Access Box (SAB®), drive modules and cabling infrastructure. The motion control is integrated into the drive so that motion sequence can take place independently. This releases the central PLC and offers a highly flexible drive concept. The decentralization of the drive unit offers benefits in mounting, installation and operation. And, depending on the application, the SAB can power up to 64 drives in a servo drive system. Applications: Packaging, food and beverage and pharmaceutical machinery applications.



Danfoss Soft Starters

G

VLT® Soft Start Controller MCD 100 An extremely cost-effective and compact soft starter that provides basic soft start and stop functionality and easy DIN rail mounting. The ‘fit and forget’ semiconductor design simplifies installation and reduces required panel space, and selection can be made on the basis of the motor power. Timed voltage ramp up and down are possible. Ramp time can be individually and accurately adjusted with rotary switches from 0.4–10 seconds, and starting torque can be adjusted from 0–85% of the direct on-line torque. Applications: Scroll compressors or reciprocating compressors in air-conditioning units, conveyors, pumps, fans and mixers.

VLT® Compact Starter MCD 200/202 Two families of soft starters that provide a total motor starting solution for motors up to 110 kW. The MCD 201 offers efficient motor-starting features, while the extended MCD 202 version provides enhanced soft-start functionality and additional motor-protection features. The series of soft starters offers easy DIN rail mounting for sizes up to 30 kW, 2-wire or 3-wire start/stop control and excellent starting duty (4 x le for 6 seconds; heavy starting ratings at 4 x le for 20 seconds). They are compatible with grounded delta power systems. Applications: Pumps, conveyors, fans, mixers and compressors.

VLT® Soft Starter MCD 500 A comprehensive solution for soft starting and stopping of three-phase asynchronous motors that increases uptime and reduces maintenance requirements. By integrating soft starters with AC motors, you can save energy, space and costs and increase the lifetime of your system by reducing wear on motors, power cables and the electrical distribution system. And there is no need to consider filters and screened cables, as soft starters generate zero harmonics. Applications: Centrifugal pumps and fans, conveyors, crushers, grinders, mixers, compressors, centrifuges, mills and saws.



Low Power Drives from Vacon

G

Combine innovation and hugh durability for the suistainable industries of tomorrow

Vacon® 100 Flow VACON® 100 FLOW is an AC drive that is dedicated to improving flow control and saving energy in industrial pump and fan applications. Applications: Fans, pumps, compressors, chillers and distribution, desalination and water-treatment applications.

Vacon® 100 Industrial VACON® 100 INDUSTRIAL is full of features and dedicated for a wide range of constant power/torque applications. The easy-to-use and robust motor controls improve the reliability and efficiency of all AC motor types, including induction and permanent magnet and synchronous reluctance motors. Applications: Fans, pumps, conveyors, compressors, steering gear, chippers and extruders.

Vacon® 20 Although extremely compact in size, the VACON® 20 is packed with functionality to help improve system performance and cost efficiency. Fast installation and set-up are possible due to easy-access terminals, integral DIN rail mounting and the parameter copying tool which can clone settings without needing mains power. The parameter list can be freely modified and application-specific parameter sets and default settings can be created. PLC functionality means individual control logic can be built into the drive and unused I/O options can be used for other machine-related tasks. Applications: Conveyors, extruders and packaging machines, textile winders, processing and washing machines, fans and pumps.

Vacon NXC Air Cooled Enclosed Drives The enclosed VACON® NXC is the compact drive that performs reliably in harsh operating conditions in, for example, the mining, oil and gas or water and wastewater industries. The thermally managed enclosure extends drive lifetime and ensures trouble-free operation. Applications: Pumps, fans, extruders, conveyors, thrusters and power conversion and propulsion units.

Vacon NXP Liquid Cooled Drive With one of the best power/size ratios, VACON® NXP Liquid Cooled drives are ideal for applications where space is at a premium or air cooling is difficult. Heavy industries with harsh operating conditions, such as in marine, offshore and mining environments benefit from the drive’s compact design and robust reliability. Applications: Compressors, wind turbines, extruders, pumps, fans, conveyors, crushers, thrusters, and propulsion, test-bench, crane, winch and powerconversion systems.



System Drives

G

Combine innovation and hugh durability for the suistainable industries of tomorrow

Vacon NXP Liquid Cooled Drive The VACON® NXP System Drive is a comprehensive configured common DC bus drive line up for heavy-industry needs where round-the-clock activity is required leaving little time for maintenance. All sections are grouped depending on their functionality, making it possible to plan each installation phase according to your requirements. The engineered sections slot in alongside each other allowing you to arrange integrated transport splits to save space. Alternatively, you can add extra transport sections to speed up installation. All larger modules have slide-out mechanics for easier set-up and maintenance. Applications: Metal lines, continuous web systems, winders and unwinders, crane systems, winches and conveyors.

Vacon NXP Liquid Cooled Drive The VACON® NXP range of common DC bus drive products includes a number of active front-ends, inverters and brake chopper units. They ensure all energy within a system is effectively utilized and redistributed. Common DC bus components can be used in many different combinations. In a regenerative DC bus system, the active front-end unit generates power back to the mains network. This is suitable for processes where braking is needed often and the braking power is relatively high. In a non-regenerative system, braking power is redistributed to other drives in the system and possible excess power can be dissipated as heat using an optional brake chopper and brake resistors. This is ideal for small production lines where braking is needed less often. Applications: Continuous web and roller table systems, winders and unwinders, cranes, hoists, gantry and trolley drives, centrifuges, winches, conveyors and excavators.

Decentral Drive Combine innovation and hugh durability for the suistainable industries of tomorrow

Vacon® 100 x VACON® 100 X features highly advanced control capability for almost all kinds of applications where a decentralized and robust solution is the best option. All the power components, including harmonic filtering chokes, are built into one compact and robust unit. A single terminal box contains the control unit and all the drive’s wiring freeing up space elsewhere. Applications: Fans, pumps, conveyors, compressors and extruders.



Danfoss Industrial Automation

G

Danfoss Industrial Automation provides a wide range of sensors for monitoring or control of pressure and temperature, and also switches and fluid controls

Pressure Transmitter Danfoss pressure transmitters help you keep demanding industrial processes under control. Accurate, robust and built for long life, they perform reliably day after day, even in the harshest environments.

Solenoid Valves Danfoss solenoid valve bodies and electrical coils are normally supplied separately and then combined.They are assembled quickly and simply without tools, providing optimum product flexibility and availability. If a coil does need to be replaced, it can be done without stopping or draining any system.The solenoid valves are also available as assembled units if required.

Temperature Sensors The Danfoss range of temperature sensors is based on decades of global experience within the marine industry and in refrigeration plants undoubtedly some of the toughest environments around. Even in these demanding surroundings you can trust our products; they have a long life thanks to their robust design.

Pressure Switches The range of pressure switches includes components for general industrial use as well as specialized switches for demanding applications.

Thermostatic Valves Thermostatic valves are a simple and reliable control solution requiring neither electricity nor control air. An example of application is automatic control of water temperature in cooling systems.The valves are available with remote or built-in sensor.

Electronic Pressure Transmitter The compact OEM electronic pressure switch, type MEP is designed for use in applications, where a combination of pressure signal and pressure switch is requested. It offers a reliable performance even under harsh environmental conditions. Excellent vibration stability, robust construction, and a high degree of EMI protection equip the electronic switch to meet the most stringent industrial requirements.

Contactor and Motor Starters Danfoss CI-TI™ contactors and motor starters provide trouble-free switching and maximum protection for your costly motors and other electrical equipment. The components are compact, easy to install and extremely reliable. They have been designed to meet our customers’ requirements, based on comprehensive application experience. More than sixty years of manufacturing experience ensure that our contactors and motor starters stand out with regards to quality and long life.



Danfoss Commercial Heating

G

Danfoss commercial heating applications can be easily introduced into existing premises and new builds, Danfoss invented the concept of radiator thermostats in 1943 and have since gone on to manufacturer many variations of thermostats and valves. With these valves and thermostats, todays’ commercial premises can save a substantial amount in heating costs and help reduce their footprint.

Commercial Control Valves, Actuators and Accessories Danfoss Commercial control valves, actuators and accessories are designed with energy saving in mind, with the rising importance of energy saving flow and heating control has never been more important, to get the most out of your heating system the Danfoss commercial range can help in not only maintaining performance, but can help drive down cost. With such a varied range, we at Greenville can help guide you in the best purchase to suit your need. Contact your Greenville rep today for a copy of the Danfoss Commercial product selection guide.

Temperature Controllers Danfoss Commercial Temperature controllers range from thermostatic valves (AVTQ) for use in instantaneous water heaters, developed for systems with plate heat exchangers, or temperature limiters (FJV) for automatic control of return water temperature from hot-water tanks in direct connected district heating systems, and for automatic control of return water temperature in district heating systems with mixing loop. Contact your Greenville rep today for a copy of the Danfoss Commercial product selection guide.

Pressure/Flow Controllers Danfoss Commercial Pressure and flow controllers, like the self-acting differential pressure relief controller (AFPA) is primarily for use in district heating systems. The controller opens on rising differential pressure acting like a switching mechanism. Whereas differential pressure controllers (AFP) closes on rising differential pressure.



Danfoss Commercial Heating

G

Danfoss commercial heating applications can be easily introduced into existing premises and new builds, Danfoss invented the concept of radiator thermostats in 1943 and have since gone on to manufacturer many variations of thermostats and valves. With these valves and thermostats, todays’ commercial premises can save a substantial amount in heating costs and help reduce their footprint.

Balancing Valves Danfoss commercial balancing valves can help maintain a limited flow rate on pipe systems and/or direct pressure from one piped system to another, whether these systems need to be manually monitored and adjusted or automatically, with so many applications for cooling or heating systems, Danfoss commercial balancing valves can help reduce cost and get the most out of your systems.

Time Controls Danfoss commercial Time Controls can come in multi-channel functionality for controlling heating temperature and water temperature, the more industrial/commercial bell-ringers(852) can be programmed to control boiler, lighting and process control, and pulsed output units for bellringing or siren sounding applications.

For more information regarding technical documents, or for more insight into some of the ranges we offer in this catalogue please contact one of our sales representatives or visit our website @ www.greenvilleidc.com. (In PDF format this document has links to each of the ranges and links to our website can be found through-out)



With over 130 years of experience in switchgear design and production, Dorman Smith Switchgear Limited continues to provide high quality equipment for low-voltage electrical distribution and circuit protection.

G

Fuse Combination Units

Available as housed or skeleton units in three and four-pole configurations from 32A to 800A. All switches have a short-circuit capacity of 80kA ms. All fuse combination units can be fitted to add-on enclosures, all with ingress protection of IP 4X

Circuit Protection Devices

• MCCB’s up to 1600A • - MCB’s up to 63A • ACB’s up to 6300A • RCBO’s up to 45A • RCCB’s up to 100A *Vast range of accessories are available

Surge Suppression Available in Type 1 and Type 2 and can be used with our range of distribution or panel boards. Enclosures are available for each range

Metering The Dorman Smith range includes digital kWh and multi-function meters, single and three-phase MID meters, Q2C quick to connect and now a new dual load meter. The Ci5 Q2C wiring solution offers pre-cut wiring looms with a range of plugin connections between the current transformer and meter for fast and error free installation. The new dual load meter is cost a effective and space saving metering system designed especially to provide energy readings from two separate current transformers in split load applications for power & lighting.

Panel and Distribution Boards

Loadbank 200

Loadbank 250

Fuse switch panel board rated at 800A. Form 2 as standard and Form 4 achieved with optional shielding fitted. Outgoing devices are fuse switches up to 200A. Surge protection and metering available as optional accessories.

Panel boards rated 400A or 800A. Incoming devices can be MCCB or fuse switch devices. Outgoing devices are YA3/YB3 frame MCCB up to 250A. Surge protection and metering available as optional accessories.



G Panel and Distribution Boards

Loadbank 125

Loadlimiter 63

SP&N boards rated at 125A and TP&N rated at 250A with various incoming options. Outgoing devices are MCB up to 63A and RCBO up to 45A. Factory built assemblies complete with metering installed, now available as vertical or horizontal split load for power & lighting applications.

Panel boards rated at 250A or 400A with YA2 frame MCCB outgoing devices up to 125A. Surge protection and metering available as optional accessories

General Purpose MCCB Enclosure Range of MCCB general purpose enclosure from 16A TO 1000A include a mounting facility for integral metering and/or earth leakage relay and current transformers.

Factory Built Assemblies Greenville is a major stockist of Dorman Smith Switchgear and can offer custom built assemblies for Lighting boards and Metered Power to comply with Part L2 regulations. We provide high quality equipment for low-voltage electrical distribution and circuit protection. To fulfil the requirements of all projects, we offer an in-house service to design, price, build and deliver all electrical switchboards to the required specifications. FBAs can be constructed using our wide range of equipment and extensive knowledge, experience and expertise in the manufacturing of controlpanels, split lighting and power distribution boards, panel boards and switchboards. We are a distributor of Dorman Smith switchgear which includes the Modis 1250 range and we can manufacture switchboards up to and including 400A and 3200A. The wide range of equipment available to us allows us to manufacture switchboards from other steelwork suppliers.



Crompton Instruments Crompton Instruments branded products offer proven reliability across a diverse array of industries including power generation, process control, test and measurement, utility, marine, defence and energy management applications.

Metering Systems Key products:

Integra DL1 Dual Load Digital Metering System Integra Ri3 Digital Metering System Integra 1630 Digital Metering System Integra 1222 Digital Metering System Integra Ci1 kWh Meter DRK kWh Meters (Single & Three-phase) MID Energy Meters

Current Transformers Key products:

Miniature Split Core Current Transformers 3-in-1 Current Transformer Q2C 3-in-1 Current Transformer Moulded Case Current Transformer Ring Current Transformer Split Core Current Transformer



G

G Since 1954, when it was founded, Finder has concentrated its efforts on the manufacture of quality products. Today it makes over 12,500 different products, including step relays, light dependent relays and other products for residential and commercial applications; industrial relays, miniature and ultra-slim relays, power relays, timers relay sockets and accessories. Industrial Socket Mounted and PCB Relays

Finder P.C.B Relays • Series 30 - Subminiature DIL relays 2A • Series 32 - Subminiature PCB relays 6A • Series 34 - Slim PCB relays(EMR or SSR) 0.1-2-6A • Series 36 - Miniature PCB Relays 10A • Series 40 - Miniature PCB Relays 8-10-12-16A

• Series 41 - Low-profile PCB relays 3-5-8-12-16A • Series 43 - Low-profile PCB relays 10-16A • Series 44 - Miniature PCB Relays 6-10A • Series 40 - Miniature PCB Relays 16A

Finder Industrial Series Relays • Series 46 - Miniature industrial relays 8 -16A • Series 55 - General purpose relays 7 - 10A • Series 56 - Power relays 12A • Series 60 - General purpose relays 6 - 10A

• Series 62 - Power relays 16A • Series 65 - Power relays 20 -30A • Series 66 - Power relays 30A • Series 67 - Solar relay 50A

Any of the P.C.B relays and the General purpose Industrial relays can be mounted to a socket, and in some cases P.C.B Relays and Industrial Relays can mounted in tandom to a single socket for din-rail mounting. Contact us with with sspecifics on what requirements you need the relay to have and we can provide the best version and best competitive price.

Finder Industrial Series Sockets • Series 93 - for 34/41 series relays • Series 90 - for 60/88 series relays • Series 92 - for 62 series relays • Series 94 - for 55/85 series relays

• Series 95 - for 40/41/43/44 series relays • Series 96 - for 56 series relays • Series 97 - for 46 series relays



G Salzer disconnect switches are hand operated switchgear for main circuits and are offered as ON-OFF switches (3, 4, 6 and 8) or as Changeover switches with the centre off (3 & 4 pole).

Enclosed Isolators

Design and Function • 90° switching angle • Forced open contacts • Terminal screws in open position • Finger protected (protection up to IP20) • Short circuit rating • Fulfils the load break requirements up to 690V or up to 1000V

Applications • ON-OFF switches • Mains switches • Emergency-Off switches • Safety switches • Distribution switches • Motor Switches

Enclosure Types Enclosure types of IP ratings as high as IP66 include: • Stainless steel enclosures • Insulated polycarbonate enclosure • Mild Steel

Contact Greenville for details on pricing, special pricing available on projects. Follow the links below or contact: [email protected] You can also find us on Twitter, Facebook and LinkedIn:



G Greenville, Specialist distributor of Electrical industrial products and assemblies are pleased to announce their appointment by Schneider, as a fully franchised partner for Schneider Power Distribution (MG)business. Greenville prides itself on representing quality global brands in the market place, we currently represent Schneider as their partner for Industry Business and this new arrangement cements our relationship to the benefit of both businesses and expands our Schneider product range.

Enclosures and Accessories Metallic Enclosures The Spacial range • Both wall mounted and floor standing • Max. load ranging from 600kg to 1000kg(floor standing) • Single or Double door features • Huge range of sizes available on request • Glass panel front on certain ranges

Insulating Enclosures The Thalassa range • Both wall mounted and floor standing • Single or Double door features • Huge range of sizes available on request • Glass panel front on certain ranges • Non UV and UV protected • Water tight with IP66 Accessories for enclosure include - Lamps, Door Switches, Document Pockets Etc.

Thermal Management Systems (For enclosure interior) The Climasys range is the cutting edge in climate control for the interior of enclosures, to maintain and reduce ambient temperature spikes or drops, options to filter the air from particles that may other wise damage critical control gear and sensors. • Cooling Units (Climasys CU) • Heat Exchangers (Climasys CE) • Fans (Climasys CV)

• • • •

Grills and Filters (Climasys CA) Condensor Heaters (Climasys CR) Temperature Sensors (Climasys CC) Software Package (ProClima)

Power & Control Gear Contactors and Protection relays The CT, iCT and Tesys range • Contactors and reversing contactors • Electronic Thermal and Thermal Overload relays • Intelligent, Direct on line and enclosed motor starters.

Power Supplies Phaseo General Purpose Power Supplies The Phaseo range can cater to single and 3-phase installations unregulated or regulated switch mode power supplies with supplies in ranges between 100V to 500V, 230V to 400V or 100V to 240V depending on range and phases.



G Industrial Automation and Control

Interface, Measurement and Control Relays The Zelio range • Machine Interface controllers • Industrial Displays • Timing controls and counters • Measurement relays (phases, voltage, current and frequency)

PLC and PAC Controllers

HMI (Terminals and Industrial PC) The Magelis range offers several components for interacting with machines, from small machine simple process equipment to Industrial PC and panel Displays

The Modicon Range serves a range of I/O coming in a variaty of IP ratings including harsher environments

Machine Safety and Sensors

Safety Controllers and Modules The Preventa range includes safety controllers, PLC’s and Modules, perfect for process applications and safety solutions

Proximity and Presence Sensors The Osisense range are a range of sensors that include Photo-electric, inductive and capacitive proximity sensors, Ultrasonic and Explosive Atmosphere sensors

Products of Note(Accessories etc.) Control Stations The Harmony range • Various Enclosures for all types of environments • Hanging pendant controls or static boxes • Wireless Controls (Harmony eXLhoist) • Pushbuttons, Switches, Pilot Lights • Modular Tower lights • Rotating Beacons • Sound Solutions



G Ready to Install and Final Distribution Products

Powerpact 4 This market-leading, low voltage distribution offer provides many unique features in the field of electrical distribution. The Powerpact 4 MCCB panel board range and Powerboard are ideally suited to installations where space is restricted or few outgoing circuits are required. • • • • • •

Can be added to any incoming or outgoing installation should the need arise Ratings covered are from 250A up to 1600A Protection for incoming and outgoing devices is provided by the Compact NS or NSX range of MCCB’s specifically adapted for Powerpact May be used as a main switchboard or sub distribution board Form 3b type 2 as standard Use of outgoing neutral or 4 pole breakers can increase the form rating to form 4b types 2 and 6

Power Busways

Canalis KN Prefabricated busbar trunking for low power distribution from 40A to 160A. Tap-off units rated current: 16 to 63A Technical characteristics: • Length of busbar trunking components: 1.5m and 3m • Rated busbar trunking current: 40 to 160A • Rated tap off units current: 16 to 63A • Rated insulating voltage: 500V • Number of active conductors: 4 + PE • Protection index: IP55 • Surface treatment: white RAL9001 • Regulations:compliant with IEC 60439-2

Canalis plug-on distribution boards Combine a moulded case circuit breaker tap-off with a distribution board in one unit. The Canalis rising main distribution boards combine a moulded case circuit breaker tap-off with a Schneider distribution board in one unit. For use in applications where rising mains are present and ideal where space is limited. The Canalis rising main distribution boards eliminate the need for a stand alone distribution board and cabling. • Available with up to 72 single pole outgoing ways • Supplied with factory fitted incomer up to 250A • Optional pre-wired pulsed or modbus meter • Choice of type A or type B distribution board

iBusway for Data Centre Monitored busbar trunking for data centre from 150 m² to more than 1,000 m² and 150 to 5000 kVA • Fixing system: raising floor and overhead • Rated busbar trunking current : 100 to 400A • Protection index : IP55, IK08 • Regulations : compliant with IEC 60439-2



G Ready to Install and Final Distribution Products

Acti9 Isobar Single & 3 Phase

Prisma Plus P

Multiform

The Acti9 Isobar single and 3 phase distribution boards can cater to the most complex installations

Wall-mounted and free-standing enclosures for electrical LV switchboards up to 3200A

High dependability LV distribution and motor control switchboard up to 7300A

Enclosed Switchgear

Twinbreak & Quadbreak

Masterpact Switch-disconnectors

Switch disconnector fuse up to 100A & Fuse switch disconnector up to 630A

High current switch disconnectors from 630 A to 6300 A

Moulded Case Circuit Breakers

Compact NS > 630A

Compact NG160

630 A to 3200 A moulded case circuit-breakers. 2 breaking capacities and 4 breaking performances.

Small size circuit breakers up to 160 A. 3 breaking performances: 16, 25 and 36 kA under 415 V

Power Monitoring & Control

PowerLogic Range

Acti 9 iEM3000 Acti 9 iEM3000 series power meters are cost attractive feature rich range of Din rail Mounted power meters


PowerLogic PM3000 & PM5000 series power meters are cost attractive feature rich range of Din rail Mounted power meters


G Common Mode Filters The use of all pole sine filters achieves excellent EMC properties, since both conducted and radiated disturbances are minimized. Thus, the usage is particularly recommended for filtering the drives of e.g. elevators, fans, pumps and compressors, which are located in sensitive environments such as medical facilities, measuring laboratories, IT or residential areas. • Rated currents from 2,5 A • Rated voltage 400 VAC ±10% • Protection class IP 00 • Switching frequency 8-16 kHz

All Pole Sinefilters The application of all-pole sine filters pays for itself by saving the cable shield with long motor cables. Another application relates to sensitive and difficult to-maintain motors. Bearing currents are completely prevented, and the winding insulation is no longer strained by rapid voltage changes. Examples: pumps, which are buried deep in the ground. Some fan motors. • For three-phase lines • Rated currents up to 2.5 A • Protection level IP20 (NEMA 1), above 50 A IP00 • Special development particularly for speeds up to 100,000 rpm

Sinusoidal Filters Sinusoidal filters change the output PWM voltage of frequency converters to a sinusoidal line-to-line voltage. Typical applications are noise reduced drives and the protection of sensible motors. Sinusoidal filters enable the operation with very long motor lines. • For three-phase lines • Sinusoidal Filters up 120Hz or 400Hz motor frequency • Rated currents from 2.5...500 A • Protection level IP20 (NEMA 1), above 50A IP00 • Special development particularly for speeds up to 100,000 rpm

Sinusoidal Filters Fuss du/dt-Filters are used to reduce the voltage slew rate at the output of frequency converters to values below 500 V/µs. • For three-phase lines • Rated currents from 6...610 A • Protection level IP20 (NEMA 1), above 180 A IP00

EMC Filters for Shielded Rooms

EMI Filters

For laboratory applications and shielded rooms. • For three-phase or single-phase lines • Voltage 250 V and 440 V • Nominal current 1...350 A • Frequency range 14 kHz...40 GHz • Protection class IP20


For laboratory applications and shielded rooms. • 2-, 3- and 4-phase filters • Voltage 230 V...690 V • Rated currents from 1...2.500 A • Protection level IP20 (NEMA 1), above 180A IP00


G

Cable Management Systems • Cable Tray & Cable Ladder • Salamandre Distribution Trunking • Cablofil Steel Wire Tray • Floor and Perimeter Systems • Swiftrack Channel Support (Steel Strut)

Industrial Plugs, Sockets & Combi Units P17 Tempra Pro Plugs & Sockets

Legrand’s P17 Tempra Pro range of LV 16A, 32A, 63A and 125A plugs and sockets offers improved strength, safety and a wealth of design features that add simplicity and speed to the installation process. Every aspect of the P17 Tempra Pro range has been designed with the user in mind. • LV 16A / 32A, 63A and 125A range of panel and surface mounting sockets, mobile sockets and straight plugs • IP44 and IP66 / 67 • IK09

P17 Tempra Plugs & Sockets • LV 16A / 32A appliance inlets • LV 63A / 125A range of panel and surface mounting sockets, mobile sockets, straight plugs and appliance inlets • IP44 and IP66 / 67 ranges • IK09

P17 Tempra Combination Units These combination units feature a unique plug-in design that enables the base to be wired independently of the cover, making installation both quicker and easier. • Available pre-assembled, or as self assembly version • Available with or without protection • IP44, IP55 and IP66 ranges • IK08

Hydra Plugs & Sockets The Hypra range is aimed at installations where maximum durability is a must... including the nuclear, chemical and process industries. • Integrated cable gland on entire IP66 / 67-55 range • Captive, slotted connection screws • Nickel-plated brass pins and contact sleeves • Captive, stainless steel external screws • Double jaw cable clamps • Available in two ranges, IP44 and IP66 / 67-55

Hydra Combination Units Tough and durable combination units available with Hypra Prisinter or Hypra panel mounting sockets. • Transparent lockable window, for security and instant monitoring • Captive, stainless steel external screws • Choice of circuit protection – DIN rail mounted MCB, RCBO and RCD protection options • IP44 and IP66 / 67-55 ranges • IK09

Hydra Prisinter Sockets With its unique interlocked load break, the Prisinter is a key asset to the Hypra range and is available in 16, 32 and 63A ratings • Padlockable cover • Compact combined socket and switch • Surface and panel mounting options • Available in plastic and metal versions • IK09 (Plastic) • IK10 (Metal)



G Decontator™ = Socket-Outlet + Switch Based on the MARECHAL technology, the DECONTACTOR™ plug and socket-outlet allows you to connect and disconnect on load up to 250 A and 75 kW without adding pilot wire, in a simple way, very quickly and without danger. You can connect and disconnect your machines in the minute and so: • Reduce downtime and downtime • Facilitate your preventive and corrective maintenance operations, • Reduce your costs. DECONTACTOR™ ranges DSN / DS / DN: 20A / 30A / 32A / 50A / 63A / 90A / 150A / 250A The DECONTACTOR™ industrial plugs are also available in ATEX version: DXN - COMPACT AND WATERTIGHT DECONTACTOR™ • from 20 A to 63 A DXA1- DECONTACTOR™ METAL • up to 20 A DX - DECONTACTOR™ METAL • from 20 A to 200 A.

Multicontact Connectors, Up to 37 Contacts MARECHAL® multicontact connectors are used for signal and control applications such as temporary phone lines and control of overhead cranes. The solid silver-nickel contacts assure superior conductivity, electrical performance and durability. Also the materials used for the bodies resist extreme conditions in harsh environments. PN7C, DN9C, PN12C, DN20C, DSN24C, DSN37C • from 5 A to 30 A - From 5 to 37 contacts PXN12C, DXN25C, DXN37C - ATEX MULTICONTACT CONNECTORS • From 12 to 37 contacts

Industrial Connectors up to to 600A Industrial plugs and socket-outlets cover all industrial electrical installations, even under the most extreme conditions. From 16 A to 600 A, these connectors are waterproof, robust with a long life span. They guarantee the electrical safety of the users and the durability of the equipment. PNC - COMPACT CONNECTOR • up to 16 A PN - COMPACT CONNECTOR • up to 30 A PNCX - COMPACT CONNECTOR • up to 10 A PF - HIGH-CURRENT PLUGS & SOCKETS • Up to 600 A/8 aux. DS4 - HIGH-CURRENT CONNECTORS • Up to 400 A/2 aux.

Unipolar Connectors up to 750A with Pilots In the most extreme environments, the MARECHAL® high current plugs ensures a steady and performant power supply on machines up to 700 A / 1000 V. The outdoor connectors, ground- or wall mounted plugs resist shocks and abuse. CS1000 - SINGLE POLE POWER CONNECTORS • Up to 400 A SP - SINGLE POLE POWER CONNECTORS • Up to 700 A + Pilotes CS - SINGLE-POLE WELDING CONNECTORS • From 75 A to 250 A SPeX - EX SINGLE POLE POWER CONNECTORS • Up to 680 A - 1 000 V

Socket, Distribution, Breakout, Junction, Bypass and Command/Control Boxes. MARECHAL® electrical boxes and enclosures are designed with many features and advantages for the electricians and end users: modularity, customization by choosing specific sizes and sockets and electrical compliance. The MARECHAL® distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes more particularly suited to power supply in tunnels. Socket and modular boxes BM / CD / BG / BRP / CRIC / Distribution boxes for tunnels EXPRESS® Atex boxes MXBS / MXBJ / B2X.



G Exterior Led Lighting Fluorescent / LED / Wellglass / Tank / Spot lights / Floodlights / Hand lamps Ex d, Ex de, Ex nA, Ex emb A complete range of lighting with dedicates design for hazardous areas. Manufactured either in stainless steel, marine grade aluminium and cast steel with an extra Polyurethane painting. Every single light brings excellent photometric properties.

Exterior Lighting Ideal for Onshore and Offshore, Marine applications and for all kinds of industry where a high level of corrosion resistance is required. Stainless steel AISI-304 or AISI-316L body, glass tempered window and glass-frame done in one unit without welding

Control Stations Range of GRP, Copper free aluminium or Stainless Steel control stations designed to offer a flexible, lightweight and cost effective solution tailor made upon customer request. To be assembled with Ex de operators in case EF.. Ex de version and with PL.. operators in case of CP.. Ex d version.

Ex Distribution and Junction Boxes Technor Italsmea offers a complete line of hazardous location junction boxes and enclosures. Whatever your wiring requirements, whatever corrosive conditions or extremes of weather your electrical system is exposed to, we have the enclosures and junction boxes you need for ATEX, IEC and IECEx Certified locations.

Visual Signals Technor® lights are used to provide warning of obstructions, call attention to moving vehicles or indicate equipment is operating. Flashing lights are used to provide warning and communication signals in areas where an audible warning cannot be heard. Technor® supplies static and rotating lights and other signal lights in a wide choice of types, styles and colors, featuring explosionproof construction for safe operation in locations exposed to hazardous gases, vapors and dusts.

Cable Glands Technor® cable glands are used in hazardous, industrial and commercial applications throughout the world, engineering safety and productivity in the most severe environmental conditions. Our global offering provides a termination solution for virtually every cable type used in hazardous and industrial environments.



G

Contrinex is a leading manufacturer of sensors for factory automation. The Swiss company, headquartered in Corminboeuf near Fribourg (CH), has a unique and innovative range of products whose features far surpass those of standard sensors. Since its foundation in 1972 by Peter Heimlicher, Dipl Ing ETH, Contrinex has grown from a one-man operation to a multinational group with over 500 employees worldwide. More than 14 subsidiaries cover the core markets in Europe, Asia, North and South America.

Inductive Sensors

An inductive sensor generates a magnetic field that is attenuated by a metal target. As a sensor nears its target, a sensing circuit detects the degree of attenuation and switches the output accordingly. Patented Condist® oscillator circuitry allows best-in-class operating distances, while all-metal construction – including the sensing face – is possible with revolutionary Condet® technology. Designers everywhere specify Contrinex inductive sensors as industrial limit switches and position switches, as pulse-counting devices, or for distance and speed measurement.

Range Includes: • • • • • • •

• • • • • •

Inductive BASIC Inductive MINIATURE Inductive EXTREME Inductive EXTRA PRESSURE up to 100 bar Inductive HIGH PRESSURE up to 1000 bar peak Inductive EXTRA TEMPERATURE up to 120°C Inductive HIGH TEMPERATURE up to 230°C

Inductive WASHDOWN Inductive ANALOG OUTPUT Inductive WELD-IMMUNE Inductive SPECIAL Inductive 2-WIRE Inductive CHIP-IMMUNE

Photoelectric Sensors

A reflex, or reflective, photoelectric sensor contains a transmitter and a receiver in a single housing, and emits a pulsed, focused light beam through a polarization filter toward a distant reflector. Reflected light returns to the sensor, passing through a second filter before arriving at the receiver. When a target object interrupts the light beam, the receiver detects the reduced light intensity and triggers the sensor.

Range Includes: • • • •

Photoelectric Cubic Miniature Photoelectric Cubic Compact Photoelectric Cubic Small Photoelectric Cubic Subminiature

• • • •

Photoelectric Cylindrical Miniature Photoelectric Cylindrical Small Photoelectric Light Grids Photoelectric cylindrical subminiature

Safety

Safetinex light curtains and access control barriers have been designed by Contrinex to offer high quality safeguarding solutions for both personnel and machinery. The range comprises highly sensitive Type 4 devices for finger, hand and access protection in various lengths. For use in rough environments, all types are available with improved degree of protection IP67 and operating temperatures as low as -35°C.

Range Includes: • • • •

Safety Finger Protection Safety Hand Protection Safety Access Control Safety Accessories

RFID

RFID (Radio Frequency Identification) is used in numerous automation and logistics applications. Durable electronic labels (called transponders or tags) allow objects to be identified throughout production and logistics processes, storing essential data for tracking, tracing and quality assurance. No line of sight is required. Use RFID solutions to eliminate costly errors in complex operations, maximize quality and speed-to-market, and rationalize material flow.

Range Includes:

• RFID Low Frequency • RFID High Frequency



G

Contrinex is a leading manufacturer of sensors for factory automation. The Swiss company, headquartered in Corminboeuf near Fribourg (CH), has a unique and innovative range of products whose features far surpass those of standard sensors. Since its foundation in 1972 by Peter Heimlicher, Dipl Ing ETH, Contrinex has grown from a one-man operation to a multinational group with over 500 employees worldwide. More than 14 subsidiaries cover the core markets in Europe, Asia, North and South America.

Ultrasonic sensors

Contrinex ultrasonic sensors provide reliable, non-contact detection of solid,liquid, granular or powdered materials in air, tolerating precipitation, humidity, dust and fumes. Target materials may be colored, transparent, polished or matt; detection is practically independent of the target’s direction of travel. Diffuse-mode and reflex sensors emit bursts of high-frequency sound waves toward a target, measuring the time elapsed until an echo is received. They contain a transmitter and a receiver in a single housing. Ultrasonic sensors are compensated for temperature variation, but are unsuitable for use with very hot targets. The technology is ideal for distance measurement and presence- or proximitydetection at moderate distances.

Range Includes:

• Ultrasonic COMPACT M30 • Ultrasonic MINIATURE M12 • Ultrasonic SMALL M18

Capacitive sensors

Robust and extremely versatile, Contrinex capacitive sensors detect position or presence of conductive and nonconductive materials, including liquids, pastes and bulk solids. Capacitive technology permits detection of targets through thin non-metallic barriers, ideal for controlling packaging and filling processes.

Range Includes:

• Capacitive BASIC • Capacitive HIGH PERFORMANCE

With such a wide range of applications that require measurement and sensor hardware, industries that include, Automotive, filling stations, food and beverage, green energy and environment, logistics, machine tools, mobile equipment, packaging machines, purpose built machines and textile, it can be a challenge to find the correct sensor to suit your needs. At Greenville, we work closely with manufacturers and receive training on all their products to gain as much knowledge and experience as possible, this in turn allows us to provide our customers with expertise in what would be the best equipment for all applications.



G

Magneto Resistive Sensors (MRS) The magneto resistive sensors (MRS) detect the movement of ferromagnetic materials, by means of the change of the magnetic flow. They are available with (Series 350) or without (series 300) detection of direction of rotation. Applications: They are suitable for rotary speed sensing, for detection of gearwheels and for standstill control. Areas of use can be extremely rough, max. switching frequency of 15 kHz.

Optoelectronic Sensors (IS) The IS-120 series comprises optoelectronic sensors for use as light sensors (energetic or with background suppression) or as reflection light barriers. Light transmitter and receiver are both mounted in the same housing. The emitting diode emits radiation with a wavelength of 660 nm with red-light switches or 880 nm with infrared switches. When hitting the detected object the pulsed light is reflected diffusely and partially impinges on the receiver. With energetic sensors the received energy is evaluated whereby the possible sensing distance is dependent on the colour/reflection characteristics and dimension/design of the object. By using sensors with background suppression the angle of incidence is evaluated and thus the sensing distance is to a great extent independent of the object’s characteristics. Applications: For example, these sensors are applicable to detect objects in front of bright or strongly reflecting surfaces.

Inductive Sensors (IAS) Inductive sensors (IAS) feature transistorised oscillators whose power consumption is influenced by the approach of metals and other electrically conductive materials such as carbon. Applications: These devices can be used as limit switches and position sensors for monitoring and positioning applications in machines and installations as well as pulse generators for counter systems, distance measurements, speed control and many other applications.

Flow Sensors (SW) The SW-600 series is a range of flow sensors based on the calorimetric measuring principle. This principle is based on the physical effect that flowing medium absorbs heat energy. The cooling of the sensor tip by the flowing medium is registered and electronically evaluated. Applications: Flow sensors are an essential component of processing- and operation plants in systems technology in order to ensure operational safety. They are used for detection of liquid media and for coolant supply as well as for safety control of pumps.

With such a complex array of sensors to suit every varied need for sensing equipment it’s important to know what sensor is best for the job. Our staff is trained by Rechner and Contrinex to help our customers in getting what they need, our competitive pricing will set us apart from competition and help maximise your productivity. Accessories are available for the full range of Rechner sensors and are available at: www.rechner-sensors.com Contact us directly for the best available prices.



G RECHNER Sensors as a company, is a market leader in capacitive sensor technology. Capacitive measurement is our core competence. RECHNER’s world of sensors offers the most innovative range of capacitive sensors for level control or position control. RECHNER excels in every sense, from capacitive sensor technology with more than 1500 models, with a large range of dimensions and process connections, up to uncompromising customer-centered service. RECHNER Sensors offer more to help the efficiency and enhance the total automation of your process.

Capacitive Sensors (KAS) Capacitive sensors (KAS) react to metals and non-metals that exceed a specific capacitance on approaching the active surface. The sensing distance with respect to a specific material is greater the higher the dielectric constant. Applications: The sensors are used to detect objects, for counting functions and for all types of level monitoring applications in liquid materials (i.e. water, oil, acids, glue) and bulk materials (i.e. powder, granulate, pellets).

Capacitive Sensors with Extreme Long Sensing Distance (KXS) The capacitive sensors with extreme long sensing distance (KXS/KXA) are based on the three-electrode measuringprinciple. This measuring principle allows much larger sensing distances compared to the two electrode principle of common capacitive sensors (KAS), up to 10- times the norm. Although one achieves essentially larger switching distances with these capacitive systems, the size of the sensors is small. Applications: KXS Systems are used for applications where the sensing distances of standard sensors are not sufficient. A further feature is the Duplex- or Triplex-operation. With the corresponding evaluation unit it is possible to adjust 1, 2 or 3 switching points with only one sensor.

Capacitive Level Measurement Systems (KFS/KFA/KFX) The capacitive level measurement systems (KFS/KFA/KFX) operate according to the three-electrode principle. With this principle the container or an additional electrode serve as a counter-electrode to the probe electrodes. For this reason it is necessary with this system that the container is of a conductive material or a “substitute electrode” is fixed to the container wall, e.g. copper foil. These systems are available with probes for analogue filling level measurement or for detection up to 4 measuring points. The position of the switching points and the analogue measuring area is custom made within the possible effective range and therefore it can be determined for optimized matching of each application. Applications Level measurements of bulk material, liquids or pastes are possible with a dielectric constant.

Isolating Switching Amplifiers (Ex Barriers) The EG…-130-… series control units contain a DC-side short-circuit protected power pack, voltage stabiliser and output relay. These control units can be actuated by all 2, 3 and 4-wire sensors with PNP, NPN, NO, NC or antivalent functions, i. e. our series IAS-10…, IAS-20…, IAS-60…, KAS-70…, KAS-80…, KAS- 90…, and SW-600.



Whether you want to check the carbon content of waste water or keep an eye on the salt content of your process water, when it comes to water analysis, HACH is the perfect choice. With years of experience in water analysis, offer a broad range of services.

G

Testing Equipment DR3900 Benchtop Spectrophotometer Compact benchtop VIS spectrophotometer with RFID technology for reliable and traceable measurement results of routine analysis and user applications. This system is designed to deliver accurate results by supporting the operator from sampling to sample preparation, sample analysis and documentation. By means of RFID technology you can trace your samples completely back to the sampling point. Lot number and expiry date information of the LCK cuvette tests are logged thanks to the 2D barcode. The RFID module reads out and displays all batch specific information from the test box. The batch certificate can be printed out immediately via the spectrophotometer.

LT200 Dry thermostat Thermostat LT200 for standard and special digestions Pre-programmed for all standard digestions and freely programmable for user specific digestions 9x13mm and 2x20mm holes Integrated protection cover Illuminated digital display for remaining time/temperature and operator guidance 3 pre-programmed and 6 freely programmable storage spaces Temperature settings between 37°C and 150°C in 1°C steps, time setting between 1 and 480 min • Great flexibility • Excellent reproducibility • Simple handling

2100Q Portable Turbidimeter Easiest calibration and verification with accurate results every time. The 2100Q Portable Turbidimeter offers unsurpassed ease of use and accuracy in turbidity measurement. Only Hach offers this unique combination of advanced features and measurement innovation, giving you accurate results every time. Compliant with USEPA Method 180.1 design criteria. • • • • •

Easy on-screen assisted calibration and verification Simple data transfer Accurate for rapidly settling samples Convenient data logging Optical system for precision in the field

TU5 Series Benchtop Turbidimeters The TU5 Series benchtop turbidimeters for drinking water and other pure water applications feature a revolutionary 360° x 90° Detection Technology™, engineered to see more of your sample than any other turbidimeter. This unique technology is used in both the TU5 online and TU5 benchtop turbidimeters, allowing you for the first time to remove the uncertainty of which measurement to trust. The 360° x 90° Detection delivers the best low level precision and sensitivity while minimising variability from test to test. The TU5 Series benchtop turbidimeters are available in four different models with stable laser light source: two EPA and two ISO models, each with an additional RFID option that allows you to compare values from online and lab measurements.



Greenville IDC - supplying quality products to Water and Wastewater monitoring applications.

G

SL1000 Portable Parallel Analyzer™ (PPA) Water Quality Testing. Dramatically Streamlined. The Hach SL1000 Portable Parallel Analyzer (PPA) performs the same tests with less than half the manual steps. Get highly accurate results, with less opportunity for errors, in a fraction of the time. Up to six parameters, tested simultaneously. NEW PARAMETERS! The following Phase II chemkeys have been released: orthophosphate, hardness, dissolved iron, and alkalinity. Free + Total Chlorine AND Copper are NOW EPA Approved! • Faster Testing • Less Variability • Less Hassle • Patented Chemkey® Technology

Chemistries, Reagents & Field Kits Hach offers a wide range of kits, from easy-to-use, single parameter color comparators to comprehensive portable laboratories with advanced instrumentation — for fast, accurate results in the field or lab. Applications include drinking water, wastewater, potable water, boiler water, and more. Hach test kits come with everything you need to start testing, including all required apparatus and a full reagent set, all in a rugged Hach carrying case. Hach chemistries are rigorously tested in combination with packaging and instruments to ensure the highest possible system performance. No other company can offer these advantages.

At Greenville we pride ourselves on our customer relations in the water industry, for all your testing and water treatment needs, our sales staff will do all they can to accommodate your needs.

Municipal Waste Water Treatment


Drinking Water Suppliers


Beverage Industries

G Controllers Digital Controllers Hach Company’s family of Digital Controllers provides versatile options for measuring your water treatment parameters. Controllers are configurable so you can custom build a product to fit your needs. Depending on the module, Hach’s digital controllers can be directly used with up to eight analog or digital sensors and they can be networked to several other controllers to support many more sensors and parameters. View all the Digital Controller options below.

Ranges Include: • • • •

Polymetron 9500 SC1000 Controller Display Module SC1000 Controller Probe Module SC200 Controller

Analogue Controllers Hach Company’s family of Analog Controllers provides economical options for measuring your water treatment parameters. Controllers can be wired in multiple hookup arrangements to meet your application requirements. Selected controllers are available with hazardous area certification for use in rough, industrial applications. View all the Analog Controller options below.

Ranges Include: • • • •

Orbisphere 366xEx Controllers • Orbisphere 51x Hydrogen Controllers Orbisphere 410/510 Carbon Dioxide Controllers • Orbisphere 51x Nitrogen Controllers Orbisphere 410/510 Oxygen Controllers • Si794 Transmitters Orbisphere 410/510 Ozone Controller

Sensors Ammonuim Sensors Ranges Include: • A-ISE sc Sensors • AN-ISE sc Sensors

Nitrate Sensors Ranges Include:

• N-ISE sc Nitrate Sensor • Nitratax sc Nitrate Sensors

Suspended Solids Ranges Include: • Solitax sc Sensors • TSS Portable • TSS sc Sensors

Ultrasonic Flow • SC200 Controller 10m Cable 20m Cable 30m Cable

pH & ORP Sensors Ranges Include: • • • • •

12mm Combi pH/ORP 1200-S ORP Sensors 1200-S sc pH Sensors 8362 sc High Purity Sensors Analogue Differential pH Sensors

• FP360 sc Oil in Water • • • •

Combi pH/ORP Sensors Differential ORP Sensors Digital Differential pH Sensors LCP pH Sensors

Organics • UVAS plus sc Sensor

Optical Multiparameter • Opus UV Sensors

Dissolved Oxygen Sensors Ranges Include: • • • • •

5500 Clark DO Sensors 5740 sc DO Sensors LDO sc Luminescent DO Sensors Orbisphere 311xx Oxygen Sensors Polymetron 9x82 Sensors

• • •

Orbisphere A1100 Oxygen Sensors OrbisphereK1100/K1200 Oxygen Sensors Orbisphere M1100 Oxygen Sensors

Conductivity Sensors Ranges Include: • • • • • • •

3400 Analogue Contacting Conductivity Sensor 3400 Digital Contacting Conductivity Sensor 3700 Analogue Inductive Conductivity Sensors 3700 Digital Inductive Conductivity Sensors 3798 sc Electrodeless Conductivity Sensors 9523 Specific and Cationic Conductivity Analyser and pH Calculator Polymetron 9525 Degassed Cation Conductivity System


Oil in Water


Sludge Level • Sonatax sc Sensor

Hydrogen and Carbon Dioxide • Orbisphere 312xx Hydrogen Sensor

Nitrogen Sensors • Orbisphere 315xx Nitrogen Sensor

Ozone Sensors • Orbisphere C1100 Ozone Sensor

MJK Automation is a leading supplier of level, flow controllers and analysis instrumentation to wastewater treatment plants, waterworks and other industries worldwide. Since being founded in 1977, MJK Automation has enjoyed solid growth in Europe, Asia and North America. Today, the equipment developed and produced at our facilities in Denmark is marketed and serviced in more than 50 countries worldwide.

G

Monitoring & Control RTU The perfect pump controller will lower your operating costs. You will get lower power consumption, longer lifetime of the pump and better utilization of the sewer system and wells. A modern MJK RTU Pump Controller, not only just activate pumps – it is an intelligent, programmable device, which among many standard features, uses the parameters you decide to calculate the most efficient operation of your pumps. • Plug’n’Play • Programmable • Data Safety with the SCADA system

Chatter DataLogger Logging data today is not just processing data such as Oxygen, PH or level. Measuring and logging data from reserviors, lakes, rivers, streams, creeks, groundwater, surface water, harbors and many other places to help adapt and improve infastructure. Logging data far away from urban areas is handled by a battery powered data logger, that gather information and send the information to a SCADA system, dedicated databases or even as e-mails when its suitable to do so.

HMI 7” TouchScreen The clear and graphical design save time and ease the pump maintains operation by providing all data by a touch. Adding a HMI Display to a pump station, the maintenance team will save time, and get better and clear information. Designed for use with all types of water distribution pumps on the market. MJK HMI has built-in data logger. All measured analogue values are presented as graphs, and can be turned on/off for easy comparison. The latest 8 active and inactive alarms can be seen and, if active, acknowledged in the alarm list.

Level Measurement Hydrostatic Level Measurement Expert™ Hydrostatic Level Transmitters are developed to produce exact level measurements, in various liquid applications. The level transmitters are monitoring the levels in boreholes, wastewater and sewer wells or even in explosion hazardous areas.

Ultrasonic Measurement Ultrasonic measurement is perfect when measuring very greasy, corrosive or fluids otherwise harmful to a pressure transmitter. Also in cases of measuring relatively sterile water, you often do not want contact to the measured media.

On-Off Control MJK on-off level control provides simple on-off control and water level detection.



MJK Automation is a leading supplier of level, flow controllers and analysis instrumentation to wastewater treatment plants, waterworks and other industries worldwide. Since being founded in 1977, MJK Automation has enjoyed solid growth in Europe, Asia and North America. Today, the equipment developed and produced at our facilities in Denmark is marketed and serviced in more than 50 countries worldwide.

Flow Measurement Open Channel Flow Measurement MJK open channel flow meters are used in standard weirs and flumes and are adaptable to any standard or non-standard weir or flume. ISO 1438 standard flow calculation is calculated by level measuring on ultrasonic or hydrostatic level sensors.

Magflux Electromagnetic Flow Measurement The versatile modular designs of our MagFlux Electromagnetic Flow Meters offer a broad range of potential applications and the flexibility to meet a wide variety of pressurized closed pipe system requirements.

Prefabricated Flumes We offer a range of prefabricated flumes as add-on and accessories for the 713 Flow Converter. The flumes are available in stainless steel and fiberglass-reinforced polyester depending on the type, designed according to the ISO 1438 standards.

Analytical Measurement Measuring Dissolved Oxygen The amount of dissolved oxygen is essential for the micro biology process; the measurement of dissolved oxygen optimizes the process and even saves energy and reduces cost.

Measuring Turbidity and Suspended Solids The SuSix turbidity and Suspended solids Analytical measurement provides important parameters for the water treatment process.

PH and Redox Measurement The pHix Compact is an innovative pH or Redox transmitter designed for easy installation and maintenance with electrode, transmitter and mounting in one unit.

Water Sampling MJK sampling product range will help you getting very stable in or outlet sampling, and a world class raingauge.



G

G Mastervolt is part of Power Products, LLC, which includes various major brands within its Marine, Mobile & Industrial division. Ancor, BEP, Blue Sea Systems, Marinco, Mastervolt and ProMariner provided innovative electrical solutions as independent companies for decades. Now these leading companies have come together to offer the broadest and most complete electrical product range for every conceivable application.

Battery chargers You want to be able to charge your batteries safely, reliably and quickly, even if the grid power is of low quality. You also value batteries that have a long lifespan while maintaining their capacity. Mastervolt offers you the best possible solution. The Mastervolt 3-step+ charging method ensures more power and a longer life for your batteries. Our battery chargers integrate multiple functions, charging your batteries safely and completely even when they are depleted. Fast battery charging is guaranteed by the efficient use of the available grid or generator power (all Mastervolt battery chargers have a power factor correction).

Product Ranges(Static):

Portable:

• • • •

• Easy Charge Portable

Mass 24 V Mass 48 V ChargeMaster 12 V EasyCharge

Combis (inverter/charger combination)

Mastervolt Combis integrate a powerful battery charger, a quiet and efficient inverter and a versatile switching system in one robust, lightweight and compact device. This multi-faceted product offers a carefree power supply for recreational and professional use. Possible applications vary from launches to 16-metre yachts, from campers to demo trucks, from holiday homes to remote businesses, and from backup systems to grid connected systems with energy storage. Each Mass Combi, Mass Combi Ultra and Mass Combi Pro can be used as an automatic stand-alone device for a non-stop power supply or as part of a larger power system.

Product Ranges: • Mass Combi 12 V • Mass Combi 24 V

• Mass Combi Ultra 12 V • Mass Combi Ultra 24 V • Mass Combi Ultra 48 V


• Mass Combi Pro 12 V • Mass Combi Pro 24 V


G

Sine wave inverters

Your AC installation offers you a wealth of benefits by making the use of any domestic appliance possible, from microwave oven to hairdryer, DVD player to power tools. A Mastervolt inverter allows you to easily convert the voltage of your 12 V or 24 V battery to 230V/50Hz or 120V/60Hz, so you enjoy all the comforts of home wherever you choose to go.

Product Ranges: • Mass Sine 12 V • Mass Sine 24 V • Mass Sine Ultra 24 V

• AC Master 12 V • AC Master 24V

Batteries

Mastervolt provides autonomous power for vehicles, boats, houses and furniture that may not be connected to the grid for long periods of time. Powerful, robustly constructed batteries are the key. Mastervolt offers several battery technologies, all designed for optimal performance, reliability and longevity in harsh environments.

Product Ranges: • Lithium Ion

• MVG 12 V • AGM 12 V

• AGM 6 V • AGM SlimLine • MVSV 2 V

Accesories: • Battery Terminals • Isolation Covers

Other systems of note: Power Managment:

AC transfer systems - Mass System Switch, MasterSwitch Mattery Management - BI Battery Isolators, Battery Mate, Charge Mate, Battery Watch Circuit breakers - AD Rocker Circuit Breakers Isolation Transformers - Mass GI, IVET (Without cabinet), Transfer systems with Soft Start

Control Gear and Displays: CZone - DC Interfaces, AC Interfaces, Displays, Network Interfaces, Network cables & connectors, Accessories Electrical Switchboards - Waterproof switches (without control button) 15A, 10/30V DC, Control buttons with illuminated legends, Installation frames for waterproof switches, Combined fuse/switch panel Master Bus - MasterHunt 500, DC Distribution 500, Digital DC 10x10A, MasterBus Interfaces, MasterBus Displays, Masterbus Accessories Remote Control & Monitoring - Amperian, Battery Monitoring, Control Panels, Analogue Meters



G Street lighting cut-outs, passive electrical terminations & feeder pillars Greenville are a distributor of Tofco Feeder Pillars, these are available in the 100, 300 and 500 series. Standard sizes are 200mm up to 2500mm wide. They are available to be finished in any colour on request. These UK made products can be supplied pre-wired to your specification. Column Doors, Control Boxes and Bracket Arms of all shapes and sizes are also available. Tofco’s fabricated feeder pillars are a staple in the U.K, as one of the leading suppliers of roadside traffic furniture and street lighting distribution housing. At Greenville we stock the Tofco’s entire collection, the 100, 300 and 500 series feeder pillars. Our staff at Greenville can help you with your selection of dimensions, single or double door, IP ratings, Color & of course best value for money.

The 100 series Specifications:

Optional Extras:

Fabricated from 3mm mild steel sheet. Standard finish is hot dipped galvanised. 18mm thick exterior grade ply backboard, treated with anti-fungicidal wood preservative. Earth strap fitted to pillar and door. Fitted with triangular headed locks. Door aperture fully gasketed. Pillar ventilation incorporated into design. Fitted with an integral root section which can be bitumen coated. Designed to IP54.

Can be manufactured from stainless steel. Door can be hinged via 2no. stainless steel hinges. Can be supplied painted leatherette grey or other colours on request. Pillar can be supplied for surface mounting. Anti-graffiti / fly poster textured finish. Vandal resistant padlock bar (VRB). Other locks available.

The 300 series Optional Extras:

Specifications:

Can be manufactured from stainless steel. Door can be hinged via 2no. stainless steel hinges. Can be supplied painted leatherette grey or other colours on request. Pillar can be supplied for surface mounting. Anti-graffiti / fly poster textured finish. Vandal resistant padlock bar (VRB). Other locks available.

Fabricated from 3mm mild steel sheet. Standard finish is hot dipped galvanised. 18mm thick exterior grade ply backboard, treated with anti-fungicidal wood preservative. Earth strap fitted to pillar and door. Fitted with triangular headed locks. Door aperture fully gasketed. Pillar ventilation incorporated into design. Fitted with an integral root section which can be bitumen coated. Designed to IP54.



G The 500 series Optional Extras:

Specifications:

Can be supplied painted leatherette grey or other colours on request. Pillar can be supplied for surface mounting. Anti-graffiti / fly poster textured finish. Padlock facility. Vandal resistant padlock bar (VRB).

Fabricated from 5mm mild steel sheet. Standard finish is hot dipped galvanised. 18mm thick exterior grade ply backboard, treated with anti-fungicidal wood preservative. Pillar door hinged using internal Heavy duty HDG hinges. Earth strap fitted to pillar and door. Fitted with Heavy duty stainless steel locks c/w cover and security screw cap. A4 document holder fitted to inside of door. Door stay mechanism. Fitted with a detachable root section, open to front and back for easy cable entry. Root section Bitumen coated. Designed to IP44.

Lighting Column Door Fabrications

With other sizes available, options for Anti Vandal Hex Locks and the option to be supplied painted, Greenville can faciltate and best advise which door and to what specification you require. Specifications: Fabricated from 2mm mild steel sheet. Standard finish is hot dipped galvanised to BS EN 1461. Fitted with M8 brass earth stud. M8 tri-head lock.

Optional Extras: Can be supplied painted. Anti vandal Hex-pin locks are available.

