Apr 30, 2015 - [11] Mitchenko, E. I., R. V. Prakash, R. Sunder, Fatigue crack growth under an equivalent FALSTAFF spectrum, Fatigue Fract. Eng. Mater. Struct.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of TTP,.
Euler and R. Kirchhof: Electrochim Acta Vol. 26 (1981), p. 1383 doi:10.1016/0013-4686(81)90006-2. [19] A.A. Bolzan, C. Fong, B.J. Kennedy and C. J. Howard: ...
Effect of Material Properties on the Mechanical Performance of Nitinol Esophageal Stent: Finite. Element Analysis. 10.4028/www.scientific.net/MSF.773-774.9.
[8] XIU Zi-yang, Effects of extrusion deformation on mechanical properties of sub-micron Si3N4p/2024 composite, Trans. Nonferrous Met. Soc. China 19 (2009) ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of TTP,.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of TTP,.
1 The DTA, DDTA, TG, and DTG analyses of the riebeckite sample up to 1100 °C with 10 °C/min. Results. The results of the DTA, DDTA, TG, and DTG analyses ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
Fabrication of light guiding plate of double-side hot-embossing ..... Yimin Gu, Nadarajah Narendran, âDesign and evaluation of an LED-based light fixture",.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of Trans.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of Trans.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of Trans.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the ...
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of TTP,.
All rights reserved. No part of contents of this paper may be reproduced or transmitted in any form or by any means without the written permission of the publisher: Trans Tech Publications Ltd, Switzerland, www.ttp.net. (ID: 173.71.180.149-25/01/10,00:57:13)
50
THERMEC'2003
Materials Science Forum Vols. 426-432
51
52
THERMEC'2003
Materials Science Forum Vols. 426-432
53
54
THERMEC'2003
Materials Science Forum Vols. 426-432
55
56
THERMEC'2003
THERMEC'2003 doi:10.4028/www.scientific.net/MSF.426-432 New Challenges in the Thermomechanical Processing of HSLA Steels doi:10.4028/www.scientific.net/MSF.426-432.49
