Menu Functions Setting Quick Guide - Aifo

45 downloads 32 Views 143KB Size Report
Display shows flash power in f-stop Elinchrom format. Display shows flash power in Ws / Joule. The Symbol “Ws” LED lights up and indicates that this function is ...
Quick Guide

RX

Photocell Function EL-Skyport Remote Control

Setup Menu Setup Sub Menu

Ready Charge Beep

Battery Charge Status Display for flash power & setup

Slow Charge

Photocell Outlet B (33%)

Synchronisation plug, 3,5mm

“Ws” (Joule) displays the power setting in Wattseconds Outlet A (100%)

Manual flash release & LED ready indication

Auto-OFF (The unit shuts down to save Battery energy. The time delay can be individually programmed)

ON / OFF

LED Pilotlight

Power setting -/+ 1/10 steps (or Setup Touches for programmable function)

Menu Functions

All functions are accessible with the following touch buttons: Press this button multiple times to select the function you want to setup.

Menu

Press this button to access preselected functions and further sub functions.

Sub Menu

Select higher/ lower values.

Power

Master reset

Press together

and turn on the unit

If after 2-5 seconds no other settings have been applied the unit returns to standard mode and the display shows the flash power setting. New settings are stored automatically.

Setting

Enter into Menu

Toggle sub-menu Photocell OFF Photocell ON

Photocell – Basic Functions : Press 1X

Automatic pre-flash setup

Press 1X

>