Papercraft Norton Instructions 1• Cut out all the parts A to E. Note: There are two parts for A. Cut around outer edge only. 2• Lightly score along all the dotted lines. Fold the scored lines. 3• Glue the backs of parts A (x2), B and D. Fold and stick together to make wings x 2, tail and hair.
4• Cut along white lines x 4. 5• Take front body part C. Stick 7 to back side of body as marked. 6• Stick 8 to back side of body as marked. 7• Stick 10, 11 and 12 to back side of body as marked. 8• Stick 1 and 4 to back side of beak. Stick 2, 3 and 9 to back side of head as marked. 9• Stick 5 to back side of beak and 6 to main front body as marked. 10• Fold legs together and stick. Then stick 13 and 14 to the base as marked. 11• Insert D into cut made in top of head. 12• Insert A into cuts made on either side of body. 13• Insert B into cut made at the bottom of the back.