patient helper on the stryker secure ii bed assembly ... - Mizuho OSI

PATIENT HELPER ON THE STRYKER SECURE IITM BED ASSEMBLY INSTRUCTIONS 3423 1. 2. 3. 4. 5.

one each

Attach Mizuho OSI Patient Helper Mounting Sleeve to the Stryker Patient Helper Bracket using the provided hardware. Insert the Patient Helper Upright into the Sleeve and secure with the Quick Release Knob. Attach the Trapeze Arm Assembly and Heavy Duty Trapeze. Adjust the Trapeze height as needed with the “S” hook on the chain. Swivel and lock the Trapeze Arm Assembly in any position using the Swivel Lock Handle.

Failure to securely tighten all knobs may lead to product failure and injury to the patient.

3. Trapeze Arm Assembly P/N 3423-05

5. Swivel Lock Handle P/N NH0817

2. Patient Helper Upright P/N 3423-6

4. Heavy Duty Trapeze P/N 3095

2. Quick Release Knob P/N 3423-19

1. Patient Helper Mounting Sleeve P/N 3423-1

1. Stryker Patient Helper Bracket Supplied from Stryker

____________________________________________________________________ LATEX

MIZUHO OSI ● 30031 Ahern Ave. ● Union City, CA EC REP

NW0519 Rev. B

!

94587 (800) 777-4674 ● FAX (510) 429-8500 www.mizuhosi.com

Emergo Europe ● Molenstraat 15 ● 2513 BH The Hague, The Netherlands

PATIENT HELPER ON THE STRYKER SECURE IITM BED ASSEMBLY INSTRUCITONS

ECN 10130 5/21/2010