Problem 1: In secured networks such as 802.1x or Cisco NAC, when the Intel.
AMT-enabled ... EAP-TLS or PEAP authentication failed during SSL handshake.
INFORMATION TECHNOLOGY -- Cisco Alternative ... SECTION II SECTION III ...
Certificate. NET 122 Network OS I. 5. NET 142 Network Mgmt Cisco I. 5.
is a client-server protocol, used to verify ... scalable and to offer more precise ... and/or path validation to a dedicated server. It also permits the centralized.
The Cisco Router Networking Certificate program is designed to teach
individuals to work with ... or Cisco Exploration 2 – Routing Protocols and
Concepts. 4.
Certificate Validation Protocol (SCVP), capable of building and validating the certification path. To implement a ... With the increase in security demands at.
This section discusses the setup for the Cisco routers in the Internet Lab. ... If you
are working on a Linux PC, create a kermit session to establish a command.
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_lisp/configuration/15-1mt/irl-15-1mt-book.html. In the meantime, ple
Cisco Intercompany Media Engine Installation and Configuration Guide. OL-
23284-01. 4. Cisco ASA Configuration. The Cisco Adaptive Security Appliance ...
To configure the Content Engine to receive and send Real-Time Streaming
Protocol (RTSP) broadcasts, use the rtsp global configuration command. To
disable ...
Explanation. BASIC MODE CHANGING COMMANDS router is used for generic
router name and. Lab-b for name after change router> enable. Move from User to
...
(a corrupted Cisco IOS image). You can also access the boot loader if you have lost or forgotten the switch password. No
2-1. Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference.
78-12155-05. 2. Cisco IOS Commands abort. Use the abort VLAN database ...
Retrying... Download. Connect more apps... Try one of the apps below to open or edit this item. Basic cisco commands boo
prepares students to take the Cisco CCNA certification exam. REQUIREMENTS
FOR ... 32 Cisco CCNA 2-Working at Sm-Med Business or ISP (F). 3. Second ...
all cisco commands pdf. all cisco commands pdf. Open. Extract. Open with. Sign In. Main menu. Displaying all cisco comma
Sign in. Loading⦠Whoops! There was a problem loading more pages. Whoops! There was a problem previewing this document
Cisco Router Basic Configuration Reference. Basic Global Configuration.
Command example. Description enable. Enter Privileged Exec mode configure ...
Configuring IP Routing Commands 105 ... Configuring the Cisco Interior Gateway
Routing Protocol 125 ... Configuring AppleTalk Routing Commands 211.
Cisco Router Basic Configuration Reference. Basic Global Configuration.
Command example. Description enable. Enter Privileged Exec mode configure ...
Permission to make digital/hard copy of part of this work for personal or .... gatekeeper need only verify Akenti's signature of the certificate, and verify that the.
self-certified key, we propose to use a concept of self-certificate. It is a user-generated ... the public key is wrong or the digital signature is wrong. So the owner of ...
Abstract. Self-certified key [Gir91,PH97] is a public key which includes the certification information of a CA in the public key itself. It pro- vides implicit ...
set of (possibly) distributed certificates digitally signed by unrelated stakeholders from different domains. These policy certificates are independently created by ...
enhanced email Recover a user's private key by archiving it for encryption certifications Plan and perform the deploymen
3-769. Cisco Wide Area Application Services Command Reference. OL-24489-
01. Chapter 3 CLI Commands. PKI Certificate Authority Configuration Mode.
Chapter 3
CLI Commands
PKI Certificate Authority Configuration Mode Commands To configure public key infrastructure (PKI) encryption certificate authorities on a WAAS device, use the crypto pki ca global configuration command. To delete a PKI encryption certificate authority, use the no form of the command. crypto pki ca certificate_authority_name no crypto pki ca certificate_authority_name
Syntax Description
certificate_authority_name
Defaults
No default behavior or values.
Command Modes
global configuration
Device Modes
application-accelerator
Name of the certificate authority (CA). The CA name may contain up to 64 characters.
central-manager
Usage Guidelines
Use the command to add and configure a certificate authority. This command initiates the certificate authority configuration mode, indicated by the (config-ca) prompt. Within certificate authority configuration mode, you can use the various commands (ca-certificate, description, revocation check, and so on) to define an encryption certificate authority. To return to global configuration mode, enter exit at the certificate authority configuration mode prompt.
Examples
The following example shows how to create or edit a certificate authority named mycertauth. If the certificate authority is already established on the WAAS device, the crypto pki ca command edits it. If the certificate authority does not exist, the crypto pki ca command creates it. WAE(config)# crypto pki ca mycertauth WAE(config-ca)# description This-is-my-CA-description WAE(config-ca)# exit WAE(config)#
Related Commands
(config-ca) ca-certificate
Cisco Wide Area Application Services Command Reference OL-24489-01
Cisco Wide Area Application Services Command Reference
3-770
OL-24489-01
Chapter 3
CLI Commands (config-ca) ca-certificate
(config-ca) ca-certificate To set the certification authority file to be used by the WAAS device, use the ca-certificate certification authority configuration command. ca-certificate filename.ca
Syntax Description
filename.ca
Defaults
No default behavior or values.
Command Modes
certification authority configuration
Device Modes
application-accelerator
Filename of the certificate authority. The filename must end in .ca and be no longer than 32 characters.
central-manager
Usage Guidelines
Before you can assign a certification authority file using the ca-certificate command, the certification authority file must be imported using the crypto import ca-certificate EXEC command. See the crypto import command.
Examples
The following example shows how to specify the certification authority file to use: WAE(config)# crypto pki ca mycertauth WAE(config-ca)# ca-certificate mycafile.ca
Cisco Wide Area Application Services Command Reference OL-24489-01
3-771
Chapter 3
CLI Commands
(config-ca) description
(config-ca) description To enter a description for the certification authority to be used by the WAAS device, use the description command. description description-text
Syntax Description
description-text
Defaults
No default behavior or values.
Command Modes
certification authority configuration
Device Modes
application-accelerator
Test to briefly describe the certification authority being used. The description text cannot contain spaces and must not exceed 256 characters.
central-manager
Examples
The following example shows how to define the descriptive text for the certification authority: WAE(config)# crypto pki ca mycertauth WAE(config-ca)# description This-is-my-CA-description
Cisco Wide Area Application Services Command Reference
3-772
OL-24489-01
Chapter 3
CLI Commands (config-ca) revocation-check
(config-ca) revocation-check To configure the certification authority revocation checking method, use the revocation-check command. revocation-check {none | ocsp-cert-url | ocsp-url} [none | ocsp-cert-url | ocsp-url]
Syntax Description
none
No revocation checking is used.
ocsp-cert-url
Enables Online Certificate Status Protocol (OCSP) revocation status checking using the CA server URL defined in the CA certificate.
ocsp-url
Enables OCSP revocation status checking using the URL defined for the global OCSP settings.
Defaults
No default behavior or values.
Command Modes
certification authority configuration
Device Modes
application-accelerator central-manager
Examples
The following example shows how to configure certification authority revocation checking to use the URL defined in the global OCSP settings: WAE(config)# crypto pki ca mycertauth WAE(config-ca)# revocation-check ocsp-url
The following example shows how to configure revocation checking to use the URL defined in the global OCSP settings as the first method, and to use no checking as the second method: WAE(config)# crypto pki ca mycertauth WAE(config-ca)# revocation-check ocsp-url none
