'Relay Practices Subcommittee' of the IEEE Power System. Relaying Committee.
He is an Editor of the IEEE Transactions on Power Delivery. He is the Founding ...
Tarlochan S. Sidhu received the B.E. (Hons.) degree from the Punjabi University, Patiala, India, in 1979 and the M.Sc. and Ph.D. degrees from the University of Saskatchewan, Saskatoon, SK, Canada, in 1985 and 1989, respectively. He was with the Regional Computer Center, Chandigarh, India, Punjab State Electricity Board, India, and Bell-Northern Research Ltd., Ottawa, ON, Canada. From 1990 to 2002, he was with the Department of Electrical Engineering, University of Saskatchewan, where he was Professor and Graduate Chairman of the Department. Currently, he is Professor and Chair of the Electrical and Computer Engineering Department at the University of Western Ontario, Canada. He is also the Hydro one Chair in Power Systems Engineering. Dr. Sidhu has authored/co-authored more than 200 journal and conference papers on the subjects of microprocessor based relaying and monitoring, applications of digital signal processing and artificial intelligence to power systems, and power system control. Five of these papers have won awards from the IEEE and IEE (UK). In addition, he has contributed to IEEE tutorials and special publications on the subject of power system protection. He has also participated in delivering a number of protection-related tutorials and short courses in various countries.
Who should attend? Field technical staff, graduate trainees, projects and utilities.
departamento de engenharia electrotécnica e de computadores
Course Speaker
Power System Protection and Automation SPA (Short Course)
SIDHU, Tarlochan S., Ph.D., P.Eng., CEng.
Course Promoter Helder Leite Ph.D., CEng.
Course Duration & Dates:
14 hours (2 days) | 2nd and 3rd of May 2011
He participates in the activities of the IEEE Power Engineering Society and CIGRE. Presently, he is the Chair of the ‘Relay Practices Subcommittee’ of the IEEE Power System Relaying Committee. He is an Editor of the IEEE Transactions on Power Delivery. He is the Founding Editor-in-Chief of the International Journal of Emerging Electric Power Systems (IJEEPS). He serves on the editorial boards of the IEEE Power Engineering Society Letters, Electric Power Systems Research and Electric Power Components and Systems. Dr. Sidhu is a Fellow of the Institution of Electrical and Electronics Engineer (IEEE), a Fellow of the Engineering Institute of Canada, a Fellow of the Institution of Engineers (India), and a Fellow of the Institute of Engineering & Technology (U.K.). He is also a Registered Professional Engineer in the Province of Ontario and a Chartered Engineer in the U.K.
LABORATÓRIO DE PROTECÇÕES
Venue: Room I-105 – University of Porto – Faculty of Engineering
Deadline for Registration: 15th of April of 2011
Fees: 650€
For more information contact: Helder Leite, (+351) 22 508 1800
[email protected]
How to Apply: www.fe.up.pt > Início > Cursos > Actualizações > SPA
email:
[email protected]
FEUP
FACULDADE DE ENGENHARIA UNIVERSIDADE DO PORTO
Skills and Learning outcomes · Improve the recognition of the impact of the intermittent weak sources on distance protection relays; and the impact of transient overvoltage on distance protection; · Enhance the understanding of the fundamental issues and practical methodology to help industry to prepare their organizations for implementation of the IEC 61850; Further review recent developments, practical experiences, pitfalls, and guidelines for IEC 61850, including critical steps for successful implementation; ·
Enhance your knowledge about protection maintenance and commissioning
Course Details
Module 1: Transmission line Protection · Principle of distance relays, Relay types, Communication channels · Test equipment & Test procedures · Impact of the intermittent weak sources on distance protection relays · Impact of transient overvoltage on distance protection · Impact of FACTS on the distance protection performance
Module 2: IEC 61850 · Developments in IEC 61850 and their impact on power system protection and control · Design approaches and specifying approaches for an IEC61850 system
Module 3: Protection Maintenance and commissioning · Switchgear and Relay Commissioning · CT magnetization and curve tests & CT polarity tests
· GOOSE engineering
· Revenue metering testing
o Stages involved in configuring a GOOSE application between two native IEC61850 protection relays o Generic Object Oriented Substation Event o Benefits of using GOOSE over traditional copper wire pilots o Information and service model o Testing and commission · Recent developments related to IEC61850
· Integration and Testing Challenges of IEC 61850 Multivendor Protection Schemes
Module 3: Protection Maintenance and commissioning · Protection maintenance overview, testing equipment familiarization (commissioning methods, points of isolations, primary and secondary injection, checking settings, returning to services)
· Testing and certification of IEC 61850 based Systems
Power Protection Laboratory Protection & Automation LABORATÓRIO DE PROTECÇÕES departamento de engenharia electrotécnica e de computadores
Research and Consulting
FEUP
FACULDADE DE ENGENHARIA UNIVERSIDADE DO PORTO
