Pre-accepted Structural Program

Pre-accepted Structural Program (List in ascending order of Program Reference) Program Reference S0001 S0002 S0003 S0004

S0009 S0010 S0011

Program SPACE GASS NL-STRESS SCALE QSE CONCRETE SUBFRAME ANALYSIS QSE CONCRETE - R C BEAM DESIGN QSE CONCRETE - R C BASE DESIGN QSE CONCRETE - R C COLUMN DESIGN QSE CONCRETE - R C SLAB DESIGN SPACE GASS SUPERSTRESS LEAP 5

S0012

COLUMN-ULS

1998-06-12

S0013

1998-06-12 2.12

1998-06-12

DESIGN TO BS8110

5.42 5.42 6.0

2005-02-27 2005-04-09 2008-05-19 2004-10-22 2004-08-12

STATIC LINEAR ANALYSIS PART

S0021

CADS 8110 - BEAM MODULE CADS 8110 - COLUMN MODULE SAFE SAFE RC ETABS FAP CONTINUOUS BEAM ANALYSIS AND DESIGN (REF. NO. HD/V2/BD-95) CONTINUOUS BEAM ANALYSIS AND DESIGN (REF. NO. WH/V2/BD-95) RAPT

ANALYSIS PART FOR FRAMEWORK STRUCTURES ONLY SADS MODULE, SLENDER COLUMN EXCLUDED ANALYSIS PART ONLY

S0022 S0023 S0024 S0025 S0026 S0027 S0028 S0029 S0030 S0031

STAAD III/ISDS RC_COLUMN SUPERSTRESS PFAD-V PFAD-L SAFE GTSTRUDL ETABS ADBEAM ADRIB

S0032 S0033 S0034

ADSEC ADCOL ADSLAB

S0035 S0036

SPACE GASS PROKON C1: CB (CONTINUOUS BEAM AND DETAILING)

S0005 S0006 S0007 S0008

S0014 S0015 S0016 S0017 S0018 S0019

S0020

Version 6.16A

Valid Till 1998-04-30 1999-05-02 1999-05-02 1998-05-14

Remarks ANALYSIS PART ONLY SECTION DESIGN TO BS8110 ONLY

1998-05-14 1998-05-14 1998-05-14 1998-05-14 6.16B 3.0 4.1

1998-05-19 1998-06-08 1998-06-08

ANALYSIS PART ONLY

1998-07-09

4.50

1998-07-20

17.0

5.41 9201PC 5.41 4.0 2.0

1998-08-31 2004-03-20 1998-09-17 1998-09-19 1998-09-19 1998-10-09 1998-10-04 2007-12-28 2004-05-22 2005-02-10

3.0 3.0 2.0

2005-01-09 2005-01-08 2005-02-10

6.16F

1998-11-09 1998-11-24

3.1C

FOR REINFORCED & POST-TENSIONED CONCRETE BEAM & SLAB SYSTEMS ANALYSIS PART ONLY

ANALYSIS PART ONLY STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS AND DESIGN TO BS 8110:1985 ANALYSIS TO BS 8110 : 1985 ONLY STATIC LINEAR ANALYSIS AND DESIGN TO BS 8110:1985 ANALYSIS PART ONLY

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0037 S0038 S0039

S0040 S0041 S0042 S0043 S0044 S0045 S0046 S0047 S0048 S0049 S0050 S0051 S0052 S0053 S0054 S0055

S0056 S0057 S0058 S0059 S0060 S0061 S0062 S0063 S0064 S0065 S0066 S0067 S0068 S0069 S0070 S0071 S0072 S0073 S0074 S0075 S0076

Program PROKON C4: COL (COLUMN DESIGN) PROKON C5: CIRCOL (CIRCLE COLUMN DESIGN) PROKON C12: GENCOL (GENERAL COLUMN DESIGN) PROKON G1: SEC (SECTION PROPERTIES) SAP 90 PLUS ETABS ETABS PLUS ETABS ETABS PLUS QSE SPACE COMPOS

Version 4.14

Valid Till 2005-07-30

Remarks

4.12

2005-07-30

1.08

2005-07-30

4.05

2005-08-28

5.40 6.03 6.04 6.04 6.0 W1.23 6.2

2007-10-18 1998-12-18 1998-12-18 1998-12-18 1998-12-19 1998-12-27 2005-04-13

RAPT MULTIFRAME 4D ETABS PLUS CSC FASTSOLVE S-FRAME CSC FASTSOLVE P-FRAME CSC FASTRAK GENERAL SECTION DESIGN MODULE CSC FASTRAK SIMPLE BEAM DESIGN MODULE CSC FASTRAK SIMPLE CONNECTION DESIGN MODULE PROKON C6: SLAB ADSEC PROKON C3: FINITE ELEMENT SLAB DESIGN TBSA ATSStructE - RELEASE 20 OASYS AP102+ AND DP102 SAFE PLUS PFAD - PAD FOOTING ANALYSIS & DESIGN SAP 90

5.01 1.04 6.10 2.1K 1.06K

1999-01-04 2006-04-15 1999-01-18 1999-02-15 1999-02-15 1999-02-15

5.41

2015-04-15

PRODAS 8110 - CORE WALL MODULE STAAD III SAFERC PLUS GTSTRUDL AES-STRUCTURAL ANALYSIS SOLVER AESSTRUCT AESSTRUCT GENERAL RC COLUMN DESIGN AND ANALYSIS OASYS AP+ COLUMNS 2 SAP 90 PLUS RAPT W-ARMER

1.0

1999-04-10

20 5.40 9201RS

1999-04-11 2002-07-11 1999-04-21 1999-04-21

ANALYSIS PART ONLY

BCR VERSION BS8110 VERSION

1.0

1999-04-21 1999-04-21 2020-08-09

6.2 5.41 5.03 2.0

2012-04-13 1999-04-29 1999-04-29 2002-07-11

STATIC LINEAR ANALYSIS PART

STATIC LINEAR ANALYSIS PART AND DESIGN TO BS5950:PART 3:SECTION 3.1:1990 STATIC LINEAR ANALYSIS PART

1999-02-15 1999-02-15

3.06 2.0 3.05

1999-03-04 2002-04-21 2005-08-28

ANALYSIS TO BS8110 ONLY

4.2 20.1 6.3 5.50

1999-03-14 2013-08-24 2005-06-25 1999-03-24 2010-04-06

ANALYSIS AND DESIGN TO BS 8110:1985 Pad Footing Analysis & Design STATIC LINEAR STRUCTURAL ANALYSIS ONLY

ANALYSIS PART ONLY

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0077

Version

Valid Till 2002-06-10

4.0 4.0 5.21 1.001 2.1

2005-06-26 2005-06-26 2008-12-17 2014-03-06 2008-07-26

1.0 6.05 1.2 5.42 5.40

2007-10-27 1999-05-17 1999-05-20 2005-07-29 1999-05-21 1999-06-05 1999-06-05 1999-06-05

S0105

Program DESIGN OF WALL & LINTEL (REF. NO. WH/V2/WD-96) MICROSAFE 2-D MICROSAFE 3-D MICROSTRAN RCAP MICROFEAP II (P2 MODULE) CAPBS ETABS PLUS OASYS BUCKLE SAFE PLUS SAFECO SLAB MODULE (HKBCR) BEAM MODULE COLUMN MODULE (HKBCR) COREWALL MODULE SLAB MODULE (BS8110) BEAM MODULE COLUMN MODULE (BS8110) COREWALL MODULE SUPERSTRESS OASYS AP202 FOOTINGS WALL DESIGN RAPT NL3DCBL.BAS TENSYL PROKON A1: PLANE FRAME ANALYSIS PROKON A3: SPACE FRAME ANALYSIS PROKON A4: SPACE TRUSS ANALYSIS SPACE GASS

S0106 S0107 S0108 S0109 S0110 S0111

ETABS PLUS ETABS SUPERCONCRETE SC-BEAM SUPERCONCRETE SC-SLAB SUPERCONCRETE SC-RCOL PIGCAR

S0112 S0113

GSA MICROSTRAN CONCRETE/8110 MOUDULE MICROSTRAN - STEEL/5950 MOUDULE RCD87 ETABS PLUS OASYS PIGLET RCAP8 SUPERSTRESS RAPT OASYS ALP

S0078 S0079 S0080 S0081 S0082 S0083 S0084 S0085 S0086 S0087 S0088 S0089 S0090 S0091 S0092 S0093 S0094 S0095 S0096 S0097 S0098 S0099 S0100 S0101 S0102 S0103 S0104

S0114 S0115 S0116 S0117 S0118 S0119 S0120 S0121

3.1 1.3 1.0 5.10 2.0 1.3 5.04

1999-06-05 1999-06-05 1999-06-05 1999-06-05 1999-06-05 1999-06-09 1999-06-18 1999-06-25 1999-06-27 2020-08-09 1999-07-03 2003-02-23

6.14

1999-07-31

5.03

1999-07-31

7.0

2005-06-20

6.12 6.1 1.1D 1.0F 1.0D FEBRUAR Y 1995 6.1 5.5

2009-07-30 1999-09-25 1999-10-14 1999-10-14 1999-10-14 2017-07-21

5.5

1999-11-01

6.1 1.20 1.001 3.1D 5.04 2.9

2004-12-19 2005-08-28 1999-11-12 2014-03-06 1999-11-21 1999-11-26 1999-12-10

2009-04-20 1999-11-01

Remarks

Static Linear Analysis Part Only

PRODAS MODULE ANALYSIS TO HKBCR, PRODAS MODULE PRODAS MODULE PRODAS MODULE, HKBCR PRODAS MODULE DESIGN TO BS 8110, PRODAS MODULE PRODAS MODULE PRODAS MODULE, BS8110

ANALYSIS PART AND STEEL MEMBERS DESIGN MODULE TO BS 5950:1990 STATIC LINEAR ANALYSIS PART

STATIC LINEAR ANALYSIS ONLY

STATIC LINEAR ANALYSIS ONLY

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0122 S0123 S0124 S0125 S0126 S0127 S0128 S0129 S0130 S0131 S0132 S0133 S0134 S0135 S0136 S0137

S0138 S0139

S0140 S0141 S0142 S0143 S0144

S0145 S0146 S0147 S0148 S0149 S0150 S0151

S0152

S0153 S0154

Program COSMOS/M STAR-LINEAR STATIC ANALYSIS MODULE ETABS PLUS ETABS PLUS MCAP/MCM ASAS-H SAP 90 PLUS COLUMN 1996# DESIGN OF CONTINUOUS BEAMS RAPT MICROSTRAN TBSA LPILE PLUS PROKON A1: PLANE FRAME ANALYSIS PROKON A3: SPACE FRAME ANALYSIS PROKON A4: SPACE TRUSS ANALYSIS PROKON S1: AXIALLY LOADED MEMBER TO BS5950 PROKON S2: COMBINED STRESS DESIGN TO BS5950 PROKON S3: BEAM-COLUMN CONNECTION TO BS5950 PROKON S5: BASE PLATE DESIGN TO BS5950 PROKON S10: BOLT GROUP STAAD III/ISDS N8110B2-BEAM N8110RC2, N8110IC2, N8110CC2 & N8110WL2-COLUMN & WALL SPACE GASS S-FRAME FOR WINDOWS GROUP PROKON A5: ANALYSIS OF A SINGLE SPAN BEAM PROKON A6: BEAM ON ELASTIC SUPPORT PROKON C3: FINITE ELEMENT SLAB ANALYSIS PROKON C6: RECTANGULAR SLAB DESIGN TO BS 8110 PROKON C7: REINFORCED CONCRETE BASE DESIGN TO BS 8110 PROKON C9: DESIGN FOR CRACK WIDTHS TO BS 8007 PROKON C10: CONCRETE SECTION DESIGN TO BS 8110

Version 1.75

Valid Till 1999-12-17

Remarks

5.41 6.03

2020-08-09 2018-08-24 1999-12-23 2000-01-19 2003-11-07 2000-01-21 2000-01-30

Static Linear Analysis Part STATIC LINEAR ANALYSIS PART

H11 5.5

5.11 5.5 5.0 2.0 5.06

2000-02-09 2006-04-15 2013-08-24 2000-02-16 2000-02-18

6.02

2000-02-18

5.05

2000-02-18

3.10

2000-02-18

2.13

2000-02-18

4.06

2000-02-18

3.09

2000-02-18

2.02 18A

2000-02-18 2006-07-03 2009-11-02 2012-09-02

3.5 1.01K 3 1.04

2000-03-14 2000-03-10 2000-03-14 2000-03-24

1.02

2000-03-24

3.06

2000-03-24

3.07

2000-03-24

3.17

2000-03-24

3.07

2005-07-30

2.05

2000-03-24

STATIC LINEAR ANALYSIS PART

STATIC LINEAR ANALYSIS PART ONLY ANALYSISI MODULE ONLY

ANALYSIS PART ONLY Analysis and Design to BS8110: 1985

ANALYSIS PART ONLY

ANALYSIS & DESIGN TO BS 8110

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0155

S0156 S0157

S0158 S0159 S0160 S0161 S0162 S0163 S0164 S0165 S0166 S0167 S0168

Program PROKON G1: CALCULATION OF SECTION PROPERTIES SAP 90 OASYS COLUMNS 2 AP123+ ANALYSIS OF R. C. IRREGULAR COLUMNS ETABS SAFE SAFECO PLUS SAFERC PLUS CBEAMM (CONTINUOUS BEAM ANALYSIS) PIGLET QSE SPACE QSE STEEL DESIGNER BS 5950:PART 1:1990 QSE SPACE NAF-NIDA

Version 4.08

Valid Till 2000-03-24

5.5 6.2

2000-05-01 2010-06-25

6.13 5.5 5.5 5.5

2009-07-05 2003-08-31 2000-05-05 2000-05-05 2000-05-20

JANUARY 1995 W2.10 W1.00

2000-05-27 2003-03-08 2018-04-08

STATIC LINEAR ANALYSIS PART

2.20 2

2019-09-20 2009-07-05

STATIC LINEAR ANALYSIS PART NON-LINEAR ANALYSIS AND DESIGN TO BS 5950

1

2009-06-22

1.001

2003-09-05 2014-03-06

S0176 S0177 S0178 S0179 S0180 S0181

NAF-SHELL (NON-LINEAR ANALYSIS) RCAP1 WALL DESIGN TO BS8110 : 1985 LEAP 5 STAAD III CALCULATION OF EFFECTS CAUSED BY LATERAL LOADS CALCULATION OF PILE AND PILE CAP CALCULATION OF FOOTING TDAS FRAMANAL BEAM-LFM BEAM-ULS COLUMN-LFM COLUMN-ULS

S0182

COLUMN-ULS2

2000-08-22

S0183 S0184

WALL-LFM WALL-ULS

2018-03-29 2000-08-22

S0185

PROKON A1: PLANE FRAME ANALYSIS C1: CONTINUOUS BEAM AND SLAB DESIGN TO BS8110 OASYS FABLON CAPBS CAPCP

S0169 S0170 S0171 S0172 S0173

S0174 S0175

S0186

S0187 S0188 S0189

5.11 21.0

2000-07-30 2000-09-21 2003-09-13

Remarks

ANALYSIS OF R. C. IRREGULAR COLUMNS

STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART EXCLUDING REINFORCEMENT DESIGN

STRUCTURAL ALALYSIS PART ONLY ANALYSIS PART ONLY

2018-03-15 2018-03-15 2.0 2.0

2006-07-26 2006-07-26 2018-03-29 2018-03-29 2018-03-29 2000-08-22

5.07

2000-09-14

SADS MODULE SADS MODULE SADS MODULE SADS MODULE SADS MODULE SADS MODULE (1.4D + 1.4W IS NOT INCLUDED IN DESIGN) SADS MODULE (1.4D + 1.4W IS NOT INCLUDED IN DESIGN) SADS MODULE SADS MODULE (1.4D + 1.4W IS NOT INCLUDED IN DESIGN) PROKON MODULE

4.06

2000-09-14

PROKON MODULE

1CC.0.10 1.5 2.5

2000-08-29 2019-09-25 2016-10-29

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0190

Program COSMOS/M

Version 1.75A

Valid Till 2004-07-31

S0191 S0192

STRAND 6 PIGLET

2000-09-09 2000-09-09

S0193 S0194 S0195 S0196

SAP 2000 SAP 2000 PILECAP MICROFEAP II (P1 MODULE) ETABS PLUS OASYS GSA SAP 2000 SAFE PLUS SAFECO SAFERC SAP 2000 GTSTRUDL CADS RC BEAM DESIGNER SECTAN

6.16 APRIL 1994 6.03 6.02 4.1 3.3

2000-09-14 2000-09-14 2000-09-21 2014-09-01

6.13 5.3 6.04 5.5 5.5 5.5 6.0 9701 2.12 2.3.28

2004-02-10 2000-09-25 2000-10-15 2009-07-30 2005-08-28 2000-10-15 2000-10-16 2001-04-27 2004-01-15 2019-03-08

11.3 5.20 5.30 1.0 6.1 6.1

2000-12-04 2000-12-04 2019-09-20 2004-04-01 2007-01-15 2018-04-19 2016-11-05

6.1

2016-11-05

ANALYSIS PART AND DESIGN TO BS8110:1985

6.1

2016-11-05

ANALYSIS PART AND DESIGN TO BS8110:1985

3.3 2.0

2019-02-11 2019-07-19

PLANE FRAME ANALYSIS

S0197 S0198 S0199 S0200 S0201 S0202 S0203 S0204 S0205 S0206 S0207 S0208 S0209 S0210 S0211 S0212 S0213 S0214 S0215 S0216 S0217 S0218 S0219 S0220 S0221 S0222 S0223 S0224 S0225 S0226 S0227

LUSAS MYSTRO RAPT ETABS PLUS MAIN SAP 2000 PLUS OASYS BEAMS (AP102+ & DP102+) OASYS COLUMNS1 (DP103+) OASYS SLABS2 (AP112+, DP112+ & DP113) PLANFRAM CONTINUOUS BEAM : ANALYSIS & RC DESIGN RC WALL DESIGN : WALLIA.BAS SPACE TRUSS PLANE GRID SPACE FRAME ANALYSIS FOR WINDOWS

S0228

STAAD III ETABS Standard SAP 2000 PLUS SAP 2000 PLUS PLANE FRAME : ANALYSIS & RC DESIGN SPACE GASS

S0229 S0230 S0231 S0232

ETABS ETABS PLUS INSTRESS CADS ANALYSE 3D

Remarks STATC STRUCTURAL ANALYSIS USING BEAM3D ELEMENT, TRUSS3D ELEMENT, AND SHELL4 ELEMENT DELETED

EXCLUDING TORSION DESIGN

STATIC LINEAR ANALYSIS PART

STATIC LINEAR ANALYSIS PART EXCLUDING REINFORCEMENT DESIGN ANALYSIS PART ONLY DESIGN TO BS 8110:1985 ANALYSIS PART AND CRACK WIDTH DESIGN TO BS 8110:1985 & BS 8007

ANALYSIS AND DESIGN TO BS8110:1985 STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART ANALYSIS PART AND DESIGN TO BS8110:1985

2001-02-08

1.7

2019-02-11 2019-02-11 2019-02-11 2004-07-02

21.1w 5.10 6.0 6.02 1.0

2009-11-20 2012-09-01 2001-02-20 2001-02-26 2019-07-19

8.0

2003-08-31

5.4 6.20 3.11 1.52

2004-02-11 2019-09-20 2019-07-28 2004-12-16

STATIC LINEAR ANALYSIS PART BUT EXCLUDING BUCKLING ANALYSIS STATIC LINEAR ANALYSIS PART Static Linear Analysis Part

ANALYSIS PART AND STEEL MEMBER DESIGN MODULE TO BS 5950 STATIC LINEAR ANALYSIS PART Staric Linear Analysis Part

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0233 S0234 S0235 S0236 S0237 S0238 S0239 S0240 S0241 S0242 S0243 S0244 S0245 S0246 S0247 S0248 S0249 S0250 S0251 S0252 S0253 S0254 S0255 S0256 S0257 S0258 S0259 S0260 S0261 S0262 S0263 S0264 S0265 S0266 S0267 S0268 S0269 S0270 S0271 S0272 S0273 S0274 S0275 S0276 S0277

Program MESAP RC_SECTION PC-MPILE PRODAS HKBCR - BEAM MODULE PRODAS HKBCR - COLUMN MODULE PRODAS HKBCR - SLAB MODULE PRODAS HKBCR - CORE WALL MODULE PRODAS BS8110 - BEAM MODULE PRODAS BS8110 - COLUMN MODULE PRODAS BS8110 - SLAB MODULE PRODAS BS8110 - CORE WALL MODULE BEAMBCR SAP 2000 PLUS BEAM 1990 COLUMN 1990 PILEGROUP RIGID BEAM ANALYSIS PILECAP MICROFEAP II : P1 MODULE MICROFEAP II : P2 MODULE ETABS PLUS LIMITSD PILENCAP BEAM BS8110 (H.K.) STAAD III ETABS CADS RC COLUMN DESIGNER OASYS GSA FADRING PILING AND PILE CAP ANALYSIS RCOL8110 ICOL8110 CCOL8110 WALL8110 BEAM8110 LATERAL PILE CEDRUS 3 PLUS STATIK 3 SUPERSTRESS SAP 90 SUPERSAP CADS 8110 R.C. DESIGN COMBFTG PILEFTG CAPCP

Version

1.40

Valid Till 2004-03-20 2004-03-20 2004-04-03 2016-06-20

Remarks

2016-06-20 2016-06-20 2016-06-20 2016-06-20 2016-06-20 2016-06-20 2016-06-20 1.0 6.06

1.0

3.0 1.0 6.21

2001-03-16 2011-07-22 2001-03-23 2001-03-23 2008-11-02 2009-01-26 2004-09-11 2004-06-13 2004-06-13 2011-07-03 2001-04-29 2001-04-29

19.0a 5.30 1.0

2001-04-29 2001-05-06 2005-06-18 2001-05-25

4.0 1.01 1.0

2001-06-09 2013-08-24 2017-05-19

2.0 2.29 2.18 3.0F 5.40

2008-11-07 2008-11-07 2008-11-07 2008-11-07 2008-11-07 2005-09-02 2019-05-08 2019-05-08 2001-06-29 2001-07-02 2005-06-13 2001-07-05 2010-07-31 2010-07-31 2018-06-17

2.0

Static Linear Analysis Part DESIGN TO BS 8110:1985 DESIGN TO BS 8110:1985

ANALYSIS PART ONLY

STATIC LINEAR ANALYSIS PART FOR DESIGN OF RAFT, FOOTINGS, PILES & PILE CAP ANALYSIS PART ONLY

STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART DELETED

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0278 S0279 S0280 S0281 S0282 S0283 S0284 S0285 S0286 S0287 S0288 S0289 S0290 S0291 S0292 S0293 S0294 S0295 S0296

S0297 S0298 S0299 S0300 S0301 S0302

S0303

S0304 S0305 S0306 S0307

S0308 S0309 S0310 S0311 S0312 S0313 S0314 S0315 S0316 S0317 S0318

Program CEDURS OASYS AP102+ AND DP102+ OASYS DP8103 OASYS AP8102 OASYS AP8123 STRUSS APPEND-PFRAME CONTBM MODULAR PANCOL5E PIGLET BDS RECSD CONBEAM PLANE TRUSS SPACE TRUSS WALL-87CODE CPLANE STRUCTURAL ANALYSIS OF BEAM ON ELASTIC FOUNDATION RECTCOL, IRRCOL, CIRCOL & WALL OASYS ALP CONTINUOUS BEAM ANALYSIS SPACE GASS REG1990 N8110RC, N8110C, N8110CC, N8110WL - COLUMN & WALL THREE DIMENSIONAL STRUCTURAL ANALYSIS BY RECTANGULAR FINITE ELEMENTS BENDSTBM NAF-LIN CAP STRUCTURAL ANALYSIS OF SLAB ON ELASTIC FOUNDATION MTDISTBM ANALYSIS OF PLANE STRESS APPLICATIONS BEAMR87 N8110B - BEAM RAPT ASPACE CGRID ANALYSIS OF PLATE BENDING DPLANE PFAP TBSA

Version 2.22 6.2 4.7B 4.3B 4.5B 2.1 1.01 1.01 5.2 APRIL 1994 1.003 CP1987 5 7.0 7.0 7.0 7.0

Valid Till 2001-07-06 2007-09-26 2001-07-21 2006-06-20 2001-07-21 2005-02-07 2005-02-07 2001-07-27 2008-07-26 2020-08-09 2017-03-06

Remarks FOR LINEAR STATIC ANALYSIS ONLY ANALYSIS AND DESIGN TO BS8110:1985

2008-01-03 2001-07-27 2008-01-02 2011-09-11 2011-09-11 2001-07-29 2011-09-11 2001-07-29

2008-01-03 3.6

2011-01-02 2001-08-02

6.15a

2001-08-02

ANALYSIS PART AND MEMBER DESIGN MODULE TO BS 5950

2004-09-17 2005-07-02

2001-08-05

1.0 1.0

2011-09-11 2011-05-20 2008-01-03 2001-08-05

ANALYSIS PART ONLY

2011-09-11 2001-08-05 1.0 4.32

1.00

2001-08-09 2005-07-02 2005-03-19 2011-09-11 2011-09-11 2001-08-09 2011-09-11 2001-08-11 2005-05-21

ANALYSIS AND DESIGN TO BS8110:1985

ANALYSIS MODULE ONLY

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0319 S0320 S0321 S0322 S0323

S0330

Program MICROLEAP PILELOAD FCAP SUPERSTRESS FADMATFD-MAT FOUNDATION ANALYSIS USING FINITE DIFFERENCES ANCORE N114RC, N114IC, N114CC, N114WL COLUMN & WALL PT-PILEGROUP DAMS (FOR PLANE FRAME ONLY) DAMS (FOR SPACE FRAME ONLY) DESIGN OF COREWALL UNDER BIAXIAL BENDING MICROSTARN-2D

S0331

MICROSTRAN-3D

S0332 S0333

SUBFRAME PROGRAM COMPLY WITH BS8110 N114B-BEAM

S0334

PC PAFEC-FE

S0335 S0336 S0337 S0338 S0339 S0340 S0341 S0342 S0343 S0344 S0345 S0346 S0347 S0348 S0349 S0350

TURBO STRESS OASYS ALP LATPILE BEAM.LV BEAM.SV LFCORE.1987 FLAT SLAB AMENDMENT CAP PLANE TRUSS SPACE TRUSS SADS SAP 90 SUBFRAME SAP 386 SAFE PLUS WMKYS9-FOUNDATION ANALYSIS AND DESIGN SAFE PLUS SAFE PLUS WMKYS6-IRREGULAR CORE WALL STRUCTURE DESIGN WMKYS10-SUBFRAME ANALYSIS AND DESIGN WMKYS1-3 DIMENSIONAL FRAME SYSTEM ANALYSIS WMKYS2-GENERAL FRAME ANALYSIS

S0324 S0325 S0326 S0327 S0328 S0329

S0351 S0352 S0353

S0354 S0355 S0356

Version 1.05 1.0 1.0 2.1E

Valid Till 2001-08-11 2001-08-11 2020-06-08 2001-08-12 2018-05-07

2001-08-18 2015-05-30 1.0

Remarks

EXCLUING NON-LINEAR OPTION

Analysis and Design to Structural Use of Concrete 1987

2001-08-10 2011-09-11 2011-09-11 2001-08-18

2.21 NOV85 3.23 JUL86

2001-08-18 2001-08-18 2005-09-26 2017-03-31

LEVEL 7.2 2.0 3.4

1.1

5.0 5.40 4.3 5.10

5.41 5.4

Analysis and Design to Structural Use of Concrete 1987

2001-08-18 2020-05-31 2001-08-19 2013-12-02 2004-05-22 2004-05-22 2004-05-22 2005-01-17 2001-08-31 2001-09-07 2001-09-07 2001-09-07 2005-03-10 2005-09-26 2001-09-09 2001-09-10 2011-04-07

STATIC LINEAR ANALYSIS PART

ANALYSIS PART ONLY

2005-08-28 2001-09-10 2011-04-07

2011-04-07 2001-09-13 2008-06-13

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0357 S0358 S0359 S0360 S0361 S0362 S0363 S0364 S0365 S0366 S0367 S0368 S0369 S0370

Version 3.0G 2.0

S0402

Program SUPERSTRESS PAL HKBR (BCR1990) ETABS STANDARD ETABS PLUS W.K. CHUNG COREDF-001 W.K. CHUNG BENTDF-001 SUPERSTRESS SUPERSTRESS BIAXALBM LOADFM OMEGA SAFE WMKYS8-BIAXIAL BENDING COLUMN DESIGN COLUMN SUPERSTRESS ETABS BIAXIAL SAFECO PLUS FAP CADS ANALYSIS 3D GTSTRUDL ETABS NON-LINEAR LFCORE FAGUS 3 STAAD III SAP 90 PLUS CADS ANALYSE 3D SAP 2000 PLUS SAP 2000 PLUS SAP 2000 PLUS CAP87 SUPER-ETABS DESIGN OF CONTINUOUS BEAM CORE DESIGN MICROFEAP II (P1 MODULE) MICROFEAP II (P2 MODULE) CONTINUOUS BEAM ANALYSIS AND DESIGN WIND BENT ANALYSIS WALL ANALYSIS COREWALL DESIGN S-FRAME CADS FE SLAB DESIGNER CONTBM1 CADS RC PAD BASE DESIGNER SAP 2000 NONLINEAR

S0403 S0404 S0405

SAP 2000 NONLINEAR SAFE PLUS CADS RC BEAM DESIGNER

S0371 S0372 S0373 S0374 S0375 S0376 S0377 S0378 S0379 S0380 S0381 S0382 S0383 S0384 S0385 S0386 S0387 S0388 S0389 S0390 S0391 S0392 S0393 S0394 S0395 S0396 S0397 S0398 S0399 S0400 S0401

6.21 5.10

4.1C 3.1F 3.0 1.0 5.10

2 4.2C1 5.11 2 5.40 2 1.61 9801 6.20 1 1.09c 12.0a 5.31 1.72 6.13 6.13 6.13 2.0

Valid Till 2007-10-19 2013-10-18 2001-09-16 2001-09-16 2001-09-16 2004-10-02 2004-10-02 2005-02-27 2008-01-27 2011-09-11 2008-01-03 2011-09-11 2001-10-14 2011-04-07 2008-01-02 2016-12-16 2001-10-26 2008-01-02 2005-02-27 2008-01-02 2001-11-10 2011-08-07 2009-01-25 2001-11-22 2019-05-08 2001-11-25 2001-11-25 2001-11-30 2009-11-02 2001-12-08 2011-02-26 2001-12-17 2005-01-08

3.1

2005-01-15 2005-02-18

1.1

2005-02-27

1.0

2005-02-10

1.00

2005-02-10 2005-02-10 2005-02-10 2006-10-28 2002-01-04 2002-01-17 2002-01-17

7.08

2002-02-24

7.08 6.15 2.21

2002-02-24 2008-04-20 2002-02-21

1.01-K 1.0

Remarks STATIC LINEAR ANALYSIS PART

STATIC AND LINEAR ANALYSIS PART ONLY

STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART

ANALYSIS PART ONLY

STATIC LINEAR ANALYSIS PART

LINEAR STATIC ANALYSIS ONLY STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART ONLY

ANALYSIS PART ONLY LINEAR STATIC ANALYSIS ONLY STATIC LINEAR ANALYSIS PART DELETED IN JUNE 1999 STEEL DESIGN TO BS5950 STATIC LINEAR ANALYSIS PART ONLY ANALYSIS AND DESIGN TO BS8110:1985

ANALYSIS PART ONLY

STATIC LINEAR ANALYSIS AND ANALYSIS USING HOOK ELEMENT ONLY STEEL DESIGN TO BS 5950 DESIGN TO BS 8110

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0406 S0407

Program CADS ANALYSE 3D SAP 386

S0408 S0409

COLDES/8110 STAAD III

S0410 S0411

Version 1.77 4.4 Pro 386-4 1.0 22.3bWM

Valid Till 2002-02-21 2002-02-25 2002-02-25 2012-04-13

SAFE PLUS SAP 90

6.12 5.30

2002-03-07 2002-03-08

S0412 S0413 S0414 S0415

BEAM 2 LEAP5 APPEND-PGRID SUPERSTRESS

1.001 6.0 4.3

2014-03-06 2007-02-05 2002-03-15 2005-12-17

S0416 S0417

1.78 1.0

2002-03-29 2006-03-18

S0418

CADS ANALYSE 3D COLUMN DESIGN FOR BIAXIAL LOAD SAP 2000 NONLINEAR

7.08

2002-05-24

S0419

SATWE

2008-04-29

S0420 S0421 S0422 S0423 S0424 S0425 S0426 S0427

CADS ANALYSE 3D CADS RC BEAM DESIGNER STRAND6 CADS FE SLAB DESIGNER MICROSTRAN WALL DESIGN PIGLET SABLE

October 1997 1.79 2.23 6.17 1.01 6.50 1.0 MAY 1997 3.22

2002-05-10 2002-05-10 2002-05-10 2002-05-17 2008-06-12 2014-03-06 2008-09-28 2002-07-11

S0428

SABLE-3D

2.10

2002-07-11

S0429 S0430 S0431

CADS RC BEAM DESIGNER PILE LOAD S-STEEL

2.40 4.0 1.0-K

2008-04-19 2020-06-08 2002-07-12

S0432 S0433 S0434 S0435 S0436

SAP 2000 PLUS SAP 2000 STANDARD SAP 2000 STANDARD SAP 2000 STANDARD ALGOR (ACCUPAK/VE)

7.11 7.11 7.11 7.11 12.02-1999

2008-11-02 2006-10-27 2006-10-27 2006-10-27 2020-08-09

S0437 S0438

7.3 1.10

2002-08-04 2002-08-29

S0439

OASYS GSA CADS RC PAD BASE DESIGNER SPACE GASS

8.02a

2008-10-27

S0440 S0441

SAFE PLUS SAFE PLUS

6.21 6.23

2002-09-02 2017-05-27

S0442 S0443 S0444

COLUMN-ULS COLUMN-ULS2 WALL-ULS

2 2 2

2020-04-06 2020-04-06 2020-04-06

Remarks LINEAR STATIC ANALYSIS ONLY

STATIC LINEAR ANALYSIS PART FOR PLANE TRUSS AND SPACE FRAME ONLY STATIC LINEAR STRUCTURAL ANALYSIS ONLY STATIC LINEAR ANALYSIS ONLY Static linear analysis and analysis with limits on supports

STATIC LINER ANALYSIS AND ANALYSIS USING HOOK ELEMENT ONLY, CONCRETE DESIGN TO BS 8110:1985 STATIC LINEAR ANALYSIS ONLY STATIC LINEAR ANALYSIS ONLY DESIGN TO BS 8110:1985 STATIC LINEAR ANALYSIS ONLY ANALYSIS PART ONLY STATIC LINEAR ANALYSIS ONLY

STATIC LINEAR ANALYSIS WITH BEAM ELEMENT ONLY STATIC LINEAR ANALYSIS WITH BEAM ELEMENT ONLY DESIGN TO BS 8110:1985 STEEL DESIGN TO BS 5950:PART 1:1990 FOR HOT ROLLED SECTION ONLY Static Linear Analysis Part STEEL DESIGN TO BS 5950:1990 CONCRETE DESIGN TO BS 8110:1985 STATIC LARGE DISPLACEMENT GEOMETRICALLY NONLINEAR ANALYSIS USING TRUSS ELEMENT AND 3D SHELL ELEMENT ONLY

STATIC LINEAR ANALYSIS AND STEEL MEMBER DESIGN MODULE TO BS 5950:1990 Static Linear Analysis and Concrete Design to BS8110:1985 SADS MODULES SADS MODULES SADS MODULES

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0445

Program IMAGES 3D

Version 3.0

Valid Till 2002-08-18

HK VERSION 1.1 1.00

2011-06-18

2018-03-15

1.33

2002-08-31

7.11

2002-09-02

PROKON A1 : PLANE FRAME ANALYSIS PROKON C21 : SECTION DESIGN FOR CRACK WIDTHS CIRCULAR RC COLUMN DESIGN BS 8110:1985 STAAD III HKCOL RC COLUMN DESIGN - BS 8110:1985 GTSTRUDL PILE AND PILE CAP ANALYSIS AND DESIGN PCAD OASYS GSA FOR WINDOWS STAAD III

W1.2.00

2002-09-18

W1.2.00

2002-09-18

4.0

2009-07-05

20.2 1999 2.1

2003-01-20 2003-01-25 2009-07-05

STATIC LINEAR ANALYSIS PART ONLY

9901 1.0

2003-02-22 2009-02-28

STATIC LINEAR ANALYSIS PART

7.4.2 23.0W

2019-02-10 2003-03-14

4.0 W1.2.00

2006-04-15 2003-03-23

1.0 4.0 5.3 2.43 W1.2.00

2003-04-05 2003-04-13 2003-04-16 2003-05-10 2003-05-22

S0467

inTENS PROKON G01 : SECTION PROPERTIES CALCULATION PILE CAP S-FRAME ADBEAM CADS RC BEAM DESIGNER PROKON A12 : BEAM ON ELASTIC SUPPORT PROKON C1 : CB

STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART FOR TRUSS/FRAME STRUCTURE ONLY TENSION STRUCTURE ANALYSIS

4.16

2003-05-22

S0468 S0469 S0470 S0471

ADCOL SAFE PLUS OASYS ADSEC SPACE GASS

5.4 6.30 5.4 8.04a

2018-10-22 2018-06-16 2012-10-04 2018-04-09

S0472 S0473 S0474 S0475 S0476

SAP 2000 PLUS SAP 2000 STANDARD SAP 2000 STANDARD SAP 2000 STANDARD SAP 2000 NONLINEAR

7.40 7.40 7.40 7.40 7.40

2018-11-05 2018-06-09 2018-08-30 2018-08-30 2020-06-08

S0477 S0478 S0479

BEAMCAP MICROSTRAN ETABS PLUS

3.0 7.0 6.23

2003-09-04 2019-03-08 2010-03-28

S0446

PKPM SERIES CAD SOFTWARE

S0447

FOUNDATION DESIGN ON RIGID CAP CADS RC COLUMN DESIGNER SAP 2000 NONLINEAR

S0448 S0449 S0450 S0451

S0452 S0453 S0454 S0455 S0456 S0457

S0458 S0459 S0460 S0461 S0462 S0463 S0464 S0465 S0466

Remarks STATIC LINEAR ANALYSIS AND ANALYSIS USING "LIMIT DISPLACEMENT IN COMPRESSION SPRING ELEMENT" ONLY STRUCTURAL DESIGN PART TO BS 8110:1985

STATIC LINEAR ANALYSIS AND ANALYSIS USING GAP ELEMENT ONLY

STATIC LINEAR ANALYSIS PART ANALYSIS AND DESIGN TO BS 8110:1985 ANALYSIS AND DESIGN TO BS 8110:1985

ANALYSIS AND DESIGN TO BS 8110:1985 OF CONTINUOUS R.C. BEAM Analysis and Design to BS8110: 1985 STATIC LINEAR ANALYSIS PART ANALYSIS TO BS 8110:1985 STATIC LINEAR ANALYSIS AND STEEL MEMBER DESIGN MODULE TO BS 5950 STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART STEEL DESIGN TO BS 5950:1990 CONCRETE DESIGN TO BS 8110:1985 STATIC LINEAR ANALYSIS AND ANALYSIS USING GAP ELEMENT STATIC LINEAR ANALYSIS PART STATIC LINEAR ANALYSIS PART

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0480 S0481

S0482

Program GENERALIZED ELASTIC SUPPORTED BEAM LUSAS

Version 1.0

Valid Till 2019-03-08

Remarks

13

2007-10-24

STATIC LINEAR ANALYSIS PART AND NATURAL FREQUENCY ANALYSIS OF STRUCTURES

2.0

2007-06-27

W1.7.04

2004-03-15

S0486 S0487 S0488 S0489 S0490 S0491

PILE AND PILE CAP DESIGN (PPCD) PROKON C01 : CONTINUOUS BEAM AND SLAB DESIGN TO BS8110:1985 WALL4D.BAS: RC WALL DESIGN PROKON C11 : RECTANGULAR COLUMN DESIGN TO BS8110:1985 MCAP ETABS PLUS ETABS PLUS MCAP OASYS PIGLET STRAND7

S0492 S0493

GTSTRUDL TBCAD

25 1.0

2004-09-17 2004-11-14

S0494 S0495

MCAP CADS RCCOLUMN DESIGNER CADS ANALYSIS 3D

5.45 1.52

2020-06-04 2005-03-10

3.00

2005-03-06

7.22 3.14 1.0

2011-05-07 2005-03-07 2019-03-30

S0500

ETABS PLUS CADS RC BEAM DESIGNER FOUNDATION DESIGN ON ELASTIC CAP (FDE) COSMOS/M

2.5

2011-10-16

S0501

ETABS PLUS

7.22

2011-05-07

S0502 S0503

ETABS PLUS PROKON C01

7.22 W1.7.09

2005-03-21 2020-09-05

S0504 S0505 S0506

MERO IDS-CB8110 MODULE SPACE GASS

384 7.1 8.07

2017-02-16 2014-04-25 2013-03-07

S0507

STRAND7

1.06

2005-04-14

S0508

ALGOR

2020-08-09

S0509

Statik 3

RELEASE 12 2.57

S0483

S0484 S0485

S0496 S0497 S0498 S0499

2019-02-11 W1.7.00

2019-07-28

6.53 7.13 7.13 7.48 2.9 1.06

2004-04-08 2019-09-20 2019-09-20 2007-06-14 2004-07-02 2004-08-14

2011-07-23

Analysis and Design to Structural Use of Concrete 1987

STATIC LINEAR ANALYSIS PART CONCRETE DESIGN TO BS8110:1985

STATIC LINEAR ANALSIS OF PLANE FRAME/TRUSS AND SPACE FRAME/TRUSS STATIC LINEAR ANALYSIS PART AUTOMATIC FLOOR LOAD CALCULAION BASED ON TRIBUTARY AREA AND CALCULATION OF MOMENT OF INERTIA OF SECTIONS DESIGN TO BS8110:1985 STATIC LINEAR ANALYSIS PART FOR 2D STRUCTURES STATIC LINEAR ANALYSIS PART DESIGN TO BS8110:1985 STATIC LINEAR ANALYSIS AND DESIGN STATIC GEOMETRIC NON-LINEAR ANALYSIS USING BEAM3D/TRUSS3D/SHELL3/SHELL3T/SHELL4/ SHELL4T ELEMENTS GRAVITY LOAD COLLECTION USING SLAB SECTION WITH PLATE OR SHELL-TYPE BEHAVIOUR CONCRETE DESIGN TO BS8110:1985 CONTINUOUS BEAM AND SLAB DESIGN TO BS8110:1985 STATIC LINEAR ANALYSIS OF SPACE TRUSS STEEL MEMBER DESIGN MODULE TO BS5950:1990 STATIC GEOMETRIC NON-LINEAR ANALYSIS USING BEAM ELEMENT AND PLATE /SHELL ELEMENT STAIC LINEAR ANALYSIS USING PLATE/SHELL ELEMENT Static Linear Analysis Part Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0510 S0511 S0512 S0513 S0514 S0515 S0516 S0517 S0519 S0520 S0521 S0522 S0523 S0524 S0525 S0526 S0527 S0528 S0529 S0530 S0531 S0532 S0533 S0534 S0535 S0536 S0537 S0538 S0539 S0540 S0541 S0542 S0543 S0544 S0545

Program Cedrus 3 Plus CADS RC COLUMN DESIGNER CADS RC BEAM DESIGNER CADS ANALYSE 3D PileCap 2000 GTSTRUDL STAAD / Pro-QSE QSE Steel Designer BS5950 FAGUS 3 Oasys GSA for Windows ETABS PLUS SAFE

Version 2.44 1.53

Valid Till 2018-07-14 2008-08-28

Remarks Static Linear Analysis Part Design to BS 8110:1985

3.16 3.12

Design to BS 8110:1985 Static Linear Analysis Part for 2D Structures

26 6.0 1.7 1.15h 7.6.1 8.09 7.01

2008-08-28 2005-08-28 2008-09-29 2005-09-17 2017-07-13 2017-07-13 2005-10-07 2005-10-07 2012-02-05 2017-11-04

Prokon A1: Plane Frame Analysis Prokon A3 : Space Frame Analysis Prokon A4 : Space Truss Analysis Prokon S1: Member Design for Axial Stress Prokon S2 : Member Design for Combined Stress COMPOS

W1.7.10

2012-05-20

Static Linear Analysis Part Static Linear Analysis Part Static Linear Analysis and Concrete Design to BS8110:1985 Static Linear Analysis Part Only

W1.7.05

2015-09-24

Static Linear Analysis Part Only

W1.7.02

2012-05-20

Static Linear Analysis Part Only

W1.7.04

2009-01-26

Design to BS5950:1990

W1.7.07

2009-01-26

Design to BS5950:1990

7.3.1

2012-02-23

22.3aW 5.02 26 26 1.0 5.7 5.9 5.11 5.02 1.1F W6.1 HK 7.2 7.2 3.31 3.41 1.61

2009-01-25 2009-04-20 2009-05-28 2006-05-19 2006-05-19 2018-01-04 2018-10-22 2018-10-22 2012-10-04 2009-04-29 2017-05-13 2006-05-13 2012-10-04 2009-07-06 2006-05-22 2006-05-22 2006-05-22

Static Linear Analysis Part and Design to BS5950 : Part 3 : Section 3.1 : 1990 Static Linear Analysis Part Only Static Linear Analysis Part Only

3.21 8.1.5 8.1.5 W1.9.03 8.67 5.15 8.1.5

2006-05-22 2012-06-15 2006-06-02 2018-05-28 2009-07-04 2006-08-24 2006-09-19

S0546 S0547 S0548 S0549 S0550 S0551 S0552

STAAD-III S-FRAME Continuous Beam GTSTRUDL GTSTRUDL ROCKCONE ADBEAM ADCOL ADSEC S-Steel SYWSCFLAT PROVERBE ADSEC ADC CADS ANALYSE 3D CADS ANALYSE 3D CADS RC COLUMN DESIGNER CADS RC BEAM DESIGNER SAP2000 Standard SAP2000 Plus Prokon C13:GENCOL Framework Multiframe 4D SAP2000 Nonlinear

S0553 S0554

ESA-PT SYWFEM - Design

4.1 4.05

2006-09-19 2006-09-25

S0555

S-Frame

6.1

2006-09-28

Static Linear Analysis Part Static Linear Analysis Part

Concrete Design to BS8110 : 1985 Steel Design to BS5950 :1990 Analysis and Design to BS8110:1985 Analysis and Design to BS8110: 1985 Analysis to BS8110:1985 Steel Design to BS5950:Part 1:1990

Analysis to BS8110:1985 Analysis and Design to BS8110:1985 Static Linear Analysis Part for 2D Structures Static Linear Analysis Part for 2D Structures Design to BS 8110:1985 Design to BS 8110:1985 Static Linear Analysis Part Static Linear Analysis Part General Column Design to BS8110:1985 Static Linear Analysis Only Static Linear Analysis Part Static Linear Analysis and Analysis using GAP and HOOK Element Static Linear Analysis Part only Static Linear Analysis and Design to BS8110:1985 Only Static Linear Analysis Part Only

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0556 S0557

Version 6.14 W1.9.00

Valid Till 2010-09-24 2009-10-14

Remarks Steel Design to BS 5950 : Part 1 :1990 Crack Width Checking to BS8007 Only

S0558 S0559 S0560 S0561 S0562 S0563 S0564 S0565 S0566

Program S-Steel Prokon C21: Section Design for Crack Width SPACE GASS Repute GTSTRUDL GTSTRUDL GTSTRUDL RAM Frame SAP2000 Standard SAP2000 Plus SAP2000 Nonlinear

8.07 1.0 27 27 27 8.04 7.50 7.50 7.50

2013-03-07 2007-01-11 2007-01-15 2007-01-15 2007-01-15 2007-01-20 2007-01-27 2007-01-27 2007-01-27

S0567 S0568 S0569

ESA-Prima Win ROBOT Millennium PIGLET

3.4 15.5.1 October 1996

2007-02-02 2007-03-01 2010-05-30

Static Linear Analysis Only Linear Soil Model Only Static Linear Analysis Part Concrete Design to BS8110:1985 Steel Design to BS5950:1990 Linear Static Lateral Load Analysis Part Only Static Linear Analysis Part Static Linear Analysis Part Static Linear Analysis and Analysis using GAP and HOOK Elements Static Linear Analysis Part Only Static Linear Analysis Part - Analysis for vertical loading only (piles are assumed to be vertical). - Analysis for vertical and horizontal loading in one plane only (piles are assumed to be raked only in the plane of loading). - Full analysis of pile group under vertical, horizontal and torsional loading (piles may be raked in any direction).

S0570 S0571 S0572 S0573 S0574 S0575

W-SECT C-SECT S-Frame SPACE GASS SAP2000 Prokon A3 : Space Frame Analysis CADS ANALYSE 3D CADS RC COLUMN DESIGNER CADS RC BEAM DESIGNER STRAND7 STRAND7

6 6 6.2 9.03 8.2.9 W1.8.13

2007-05-30 2007-06-06 2013-06-08 2018-09-18 2007-06-20 2007-06-28

Static Linear Analysis Part only Static Linear Analysis Only Static Linear Analysis Part Static Linear Analysis Part Only

3.44 1.62

2007-06-24 2007-06-24

Static Linear Analysis Part for 2D Structures Designer to BS 8110:1985

3.23 2.2.5 2.2.5

2007-06-24 2007-06-24 2007-06-24

ETABS ETABS MIDAS/Gen Oasys GSA for Windows SOFISTIK Modules GENF, SOFIMESH, AQUA, SOFILOAD, ASE and STAR2 B-SECT BEAM-LFM BEAM - ULS COLUMN - LFM COLUMN - ULS COLUMN - ULS2 WALL - LFM WALL - ULS RCD 2004 SWALL CADS RC COLUMN DESIGNER

8.3.7 8.3.7 5.8.1 8.0

2019-08-03 2019-08-03 2007-07-13 2007-07-12 2016-01-06

Designer to BS 8110:1985 Static Linear Analysis Part Static Geometric Non-linear Analysis for Beam, Truss, Plate & Shell Elements Static Linear Analysis Part Gravity Load Collection Static Linear Analysis Part Static Linear Analysis Part Static Linear Analysis Part

6 3 3 3 3 3 3 3

2007-07-18 2018-06-24 2019-05-11 2018-06-24 2019-05-11 2019-05-11 2018-06-24 2019-05-11 2015-02-28 2014-03-06 2008-01-13

Design to BS 8110:1985

S0576 S0577 S0578 S0579 S0580 S0581 S0582 S0583 S0584 S0585

S0586 S0587 S0588 S0589 S0590 S0591 S0592 S0593 S0594 S0595 S0596

1.0 1.65

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0597 S0598

Program CADS RC BEAM DESIGNER SuperSTRESS

S0599 S0600 S0601 S0602 S0603 S0604

Version 3.27 6.1c

Valid Till 2008-01-13 2008-01-13

CADS ANALYSE 3D ADSEC ROBOT Millennium VLA-S1 VLA-S2 VLA-S5

3.51 7.3 17.5 1.0 1.0 1.0

2008-01-17 2008-01-18 2008-01-25 2020-04-13 2020-04-13 2020-04-13

S0605

VLA-S6

1.0

2020-04-13

S0606 S0607 S0608

Microstran Lateral Pile SAFE

8.0 5.0 8.0.6

2020-05-21 2020-05-31 2020-06-08

S0609 S0610 S0611 S0612 S0613 S0614 S0615 S0616 S0617 S0618

SAP2000 RuckZuck Shear Wall VLA-S3 VLA-S4 VLA-S7 VLA-F1 VLA-F2 VLA-F3 FAP

9.1.0 5

2017-12-21 2008-06-03 2008-06-05 2020-04-13 2020-04-13 2020-04-13 2020-05-01 2020-05-01 2020-05-01 2008-09-14

S0619

TCP Design

S0620 S0621 S0622

VLA-G2 TEDDS 8.0 STAAD.Pro

S0623 S0624 S0625 S0627 S0628 S0629

PIGLET VLA-G1 ADAPT-PT Tower Peak RAPT CAD RC COLUMN DESIGNER CAD RC BEAM DESIGNER GTSTRUDL GTSTRUDL GTSTRUDL Tower Peak ETABS Plus SAP2000 SAP2000 SPACE GASS SPACE GASS CBHK2004

S0630 S0631 S0632 S0633 S0634 S0635 S0636 S0637 S0638 S0639 S0640 S0641

Rectangular RC Column Design (ULS)

1.0 1.0 1.0 1.0 1.0 1.0 8110X April 2005 1.0 - Mar 2005 1.0

Remarks Design to BS 8110:1985 Static linear analysis and analysis with limits on supports Static Linear Analysis Part for 2D Structures Analysis to BS8110:1985 Static Linear Analysis Part

Design to Code of Practice for Structural Use of Concrete 2004 with concrete grade not exceeding C45 Design to Code of Practice for Structural Use of Concrete 2004 with concrete grade not exceeding C45 Static Linear Analysis Part Static Linear Analysis and Concrete Design to BS8110:1985 Static Linear Analysis Part

2008-09-19

Release 2004 5.1 1.0 7.10 1.0 6.1 1.66

2020-05-01 2008-11-22 2017-07-02

Continuous Beam Analysis Static Linear Analysis Part

2018-08-11 2020-05-01 2008-10-16 2017-12-21 2008-10-25 2009-01-16

Analysis and Design to BS8110:1985 Static Linear Analysis of Tall Building Analysis and Design to BS8110:1985 Designer to BS 8110:1985

3.28 28 28 28 1.0 P5.40 9.1.6 9.1.6 10.21 10.21 1.0

2009-01-16 2009-01-05 2009-01-05 2009-01-05 2017-12-21 2019-03-23 2017-12-03 2009-01-25 2009-01-25 2009-01-25 2009-02-07

1.0

2012-03-11

Designer to BS 8110:1985 Static Linear Analysis Part Concrete Design to BS8110:1985 Steel Design to BS5950:1990 Analysis and Design of Foundation Group Static Linear Analysis Part Static Linear Analysis Part Steel Design to BS5950:1990 Static Linear Analysis Part Steel Design to BS5950:1990 Continuous Beam Analysis and RC Design to HK Code of Practice for Structural Use of Concrete 2004 Concrete Grade not Exceeding C45

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0642 S0644 S0645 S0646 S0647 S0648 S0649 S0650 S0651 S0652

Program Circular RC Column Design (ULS) ADCOL BEAM 04 Col 04 SWALL 04 ADAPT - Floor Pro RSTAB SuperSTRESS SuperSTRESS Wood-Armer NAF-NIDA

S0653 S0654 S0655 S0656 S0657 S0658 S0659

SAP2000 BEAM-2004 Column-2004 Wall-2004 HKBM2004 inTENS Orion R14

S0660

Version 5.0

Valid Till 2012-03-11

8.0 1.0 1.0 1.0

2009-02-15 2015-04-24 2015-04-24 2015-04-24 2009-03-31 2017-08-07 2015-08-16 2015-08-16 2018-02-10

5 6.4D 3.0G 7

Remarks Concrete Grade not Exceeding C45

Concrete Grade not Exceeding C45 Concrete Grade not Exceeding C45 Concrete Grade not Exceeding C45 Analysis and Design to BS8110:1985

9.1.6 1 1 1 1.01 5.3

2012-11-02 2013-11-08 2013-11-08 2013-11-08 2018-10-11 2009-07-10 2019-05-16

CONBEAM2006

1.0

2009-07-23

S0661

Wall RC Design ( ULS)

1.0

2009-07-24

S0662

FAP

2015-07-09

S0663

TCP Design

2015-09-17

Concrete Grade not Exceeeding C45

S0664 S0665 S0666 S0667 S0668 S0669

TEDDS S-FRAME ROBOT Millennium SAP2000 STRAND7 STRAND7

8110X200 4 March 2006 2.0 March 2006 9.0 7.0 19.0 10.0.8 2.3.6 2.3.6

Static linear analysis Part Design of Concrete Slab to BS 8110:1985 Non-linear Analysis and Design to Code of Practice for the Structural Use of Steel 2005 Elastic Buckling of Frame and Shell Concrete Grade not Exceeding C45 Concrete Grade not Exceeding C45 Concrete Grade not Exceeding C45 Concrete Grade not Exceeding C45 Tension Structure Analysis - Static Linear Analysis only - Only default "Area Factor 1.0" in stiffness options of building analysis is allowed - Users may need to assess the effect of differential elastic shortening of column/wall elements - Transfer plate is modelled by grillage of beams RC Design to HK Code of Practice for Structural Use of Concrete 2004 RC Design to HK Code of Practice for Structural Use of Concrete 2004 Concrete Grade not Exceeding C45

2009-08-16 2015-07-22 2018-05-07 2018-07-14 2012-11-18 2009-10-26

S0670

Prokon C11: Rectangular Column Design Prokon C13 : General Column Design ETABS ETABS GTSTRUDL GTSTRUDL GTSTRUDL CADS RC COLUMN DESIGNER CADS RC BEAM DESIGNER CADS ANALYSE 3D

S0671 S0672 S0673 S0674 S0675 S0676 S0677 S0678 S0679

W2.2.07

2009-11-27

W2.2.03

2009-11-27

9.1.0 9.1.0 29 29 29 1.68

2018-11-25 2018-11-25 2009-12-07 2009-12-07 2009-12-07 2009-12-06

Continuous Beam Analysis Static Linear Analysis Part only Static Linear Analysis Part Static Linear Analysis Part Static Linear Analysis Part Static Geometric Non-linear Analysis for Beam, Truss, Plate & Shell Elements RC Design to HK Code of Practice for Structural Use of Concrete 2004 RC Design to HK Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part Gravity Load Collection Static Linear Analysis Part Concrete Design to BS8110 : 1985 Steel Design to BS 5950 : 1990 Design to BS8110: 1985

3.30 3.62

2009-12-06 2009-12-06

Design to BS 8110: 1985 Static Linear Analysis Part for 2D Structures

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0680 S0681 S0682 S0683

S0684

Program Prokon C01 : Continuous Beam and Slab Design Oasys GSA for Windows COLUMN2006 Tower Peak

S0690 S0691 S0692 S0693

PRODAS 2004 - SLAB MODULE PRODAS 2004 - BEAM MODULE PRODAS 2004 - COLUMN MODULE PRODAS 2004 - CORE WALL MODULE Foundation Design on Rigid Cap Foundation Design on Elastic Cap (FDE) SPACE GASS SPACE GASS SPACE GASS SPACE GASS

S0694 S0695 S0696 S0697

SAP2000 SAP2000 SAP2000 ADSEC

S0698 S0699 S0700

S0685 S0686

Version W2.2.24

Valid Till 2013-01-24

8.2 1.0 1.0

2010-02-08 2010-02-27 2013-07-20

Remarks Excluding desgin for flanged beam and concrete grade not exceeding C45 Static Linear Analysis Part for rc column with concrete grade not exceeding C45 Reinforced Concrete Design to Code of Practice for structural Use of Concrete 2004 for concrete grade not exceeding C45

2010-05-09 2010-05-09 2010-05-09

Concrete grade not exceeding C45

2010-05-09

Concrete grade not exceeding C45

2.00

2019-03-08

Concrete grade not exceeding C45

2.00

2019-03-08

Concrete grade not exceeding C45

10.50 10.50 10.50 10.50

2016-06-16 2016-06-16 2016-06-16 2016-06-16

11.0.4 11.0.4 11.0.4 8.0

2019-03-30 2013-08-24 2013-08-24 2013-08-02

Static Linear Analysis Part Analysis of elastic critical load Steel Design to BS 5950: 1990 Steel Design to Code of Practice for the Structural Use of Steel 2005 Static Linear Analysis Part Steel Design to BS5950 : 1990 Elastic Buckling of Frame and Shell Analysis to code of Practice for Structural Use of Concrete 2004 and PNAP 296

ISA TEDDS Orion

5.0 10.0 R14

2010-08-26 2018-10-15 2019-05-16

S0701 S0702 S0703 S0704 S0705

Orion BEAM - 2004 COLUMN-2004 Wall - 2004 LUSAS

R14 2.0 2.0 2.0 14

2010-09-17 2019-10-06 2019-10-06 2019-05-11 2010-10-14

S0706

STAAD.Pro

2017-05-26

S0707 S0708

S-Steel SPACE GASS

Release 2006 7.02 10.5

2014-06-13 2011-02-04

S0709

SAP2000

11.0.4

2014-02-14

S0710

ADAPT-Floor Pro

3.10

2011-02-19

S0711

ADAPT-PT

8.0

2014-07-27

S0712 S0713

SYWSCFLAT 2004 CBHK2004

2.0

2017-05-13 2017-03-05

S0687 S0688 S0689

Continous Beam Analysis Design Part to Code of Practice for Structural Use of Concrete 2004 with concrete grade not exceeding C45 Design Part to BS8110: 1985 SADS Modules SADS Modules SADS Modules Static Linear Analysis Part and Natural Frequency Analysis of Structures Static linear analysis only Steel Design to BS5950: Part 1 :1990 Second Order Analysis Inclusion of member imperfections is not automatic and must be input manually Second Order Analysis Inclusion of member imperfections is not automatic and must be input manually. Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2004 Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2004 Concrete grade not exceeding C45 Continuous Beam Analysis and RC Design to Code of Practice for Structural Use of Concrete 2004 with Concrete grade not exceeding C70 Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0714

Program ANSYS

S0715

TowerPeak

S0716

ADAPT-ABI

S0717 S0718 S0719 S0720 S0721 S0722

Version Release 10.0 1.0

Valid Till 2017-08-04

Remarks Solid Element SOLID45 - Linear Analysis Only

2017-12-21

4.09

2011-05-19

Static linear analysis for superstructure combined with foundation Post-Tensioning Analysis only to Code of Practice for Structural Use of Concrete 2004

COLUMN2006 Prokon C11 Prokon C13 Prokon C01

2.0 W.2.4.01 W.2.4.01 W.2.4.01

2014-07-13 2020-06-11 2020-06-11 2020-06-11

W.2.3.06 W.2.3.20

2017-06-15 2017-06-15

S0723

Prokon C13 Prokon C01 Continous Beam/Slab ADC

8.1

2011-06-29

S0724

Orion R15

R15

2011-07-07

S0725 S0726 S0727 S0728 S0729

2.0 R15

2011-07-20 2011-09-16 2017-07-21 2017-07-21 2017-07-21

Static Linear Analysis Part Concrete grade not exceeding C70 Concrete grade not exceeding C70 Concrete grade not exceeding C70

2017-07-21

Concrete grade not exceeding C70

S0731

CONBEAM2006 Orion PRODAS 2004 - Slab Module PRODAS 2004 - Beam Module PRODAS 2004 - Column Module PRODAS 2004 - Corewall Module TowerPeak

2.0

2015-02-20

S0732 S0733 S0734 S0735 S0736 S0737 S0738 S0739

GTSTRUDL GTSTRUDL GTSRUDL CADS Analyse 3D Oasys GSA for Windows Oasys GSA for Windows CADS RC BEAM DESIGNER NAF-NIDA

29.1 29.1 29.1 3.67 8.3 8.3 3.33 8

2012-02-22 2012-02-22 2012-02-22 2012-02-23 2012-03-10 2012-03-10 2012-03-15 2015-03-14

S0740 S0741 S0742 S0743 S0744 S0745 S0746 S0747

ETABS ETABS Rectangular RC Column Design Circular RC Column Design ETABS ETABS inTENS RCD09

9.5.0 9.5.0 1.0 5.0 8.5.1 8.5.1 5.5 2.0.0

2018-06-17 2018-06-17 2018-08-23 2018-08-23 2012-04-15 2012-04-15 2012-06-07 2019-03-14

S0748 S0749

SPACE GASS SAP2000

10.50 12.0.2

2012-08-11 2019-02-01

S0750

SAP2000

12.0.2

2019-02-01

Reinforced concrete design to Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part Concrete Design to BS8110:1985 Steel Design to BS5950:1990 Static Linear Analysis Part for 2D Structures Static Linear Analysis Part Elastic Critical Load Factor Analysis Design to BS8110: 1985 Non-linear Analysis and Design to Code of Practice for the Structural Use of Steel 2005 Static Linear Analysis Part Gravity Load Collection ULS ULS Static Linear Analysis Part Gravity Load Collection Tension Structure Analysis Design to COde of Practice for Structural Use of Concrete 2004 Dynamic Frequency Analysis for Space Frame -Static Linear Analysis Part -The users may need to assess the effect of differential axial shortening of column/wall elements Steel Design to B5950: 1990

S0751

SAP2000

12.0.2

2019-02-01

S0752 S0753

Wall RC Design (ULS) Oasys ALP

1.0 18.2

2018-08-23 2018-05-20

S0730

Rectangular Column Design General Column Design Continuous Beam/Slab (Concrete grade not exceeding C70) General Column Design Concrete grade not exceeding C70 Analysis and Design to Code of Practice for Structural Use of Concrete 2004 Analysis and Design to Code of Practice for Structural Use of Concrete 2004

Linear Elastic Buckling Analysis of Frame and Shell Only ULS

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0754

Program CONBEAM2006

Version 3.0

Valid Till 2015-10-29

S0755

ADAPT BUILDER Floor Pro 2009/2010

S0756

LUSAS

14.3

2017-02-16

S0757

ADSEC

8.1

2012-11-17

S0758

RAPT

6.2

2012-11-16

S0759 S0760 S0761

Oasys GSA for Windows Oasys GSA for Windows Orion

8.4 8.4 15.1

2012-11-18 2012-11-18 2016-01-24

S0762

Orion

15.1

2016-01-24

S0763

ADC

8.2

2012-12-20

S0764

v.2010

2013-01-12

v.2010

2013-01-12

Elastic Critical Load Factor Analysis

v.2010

2013-01-12

Natural Frequency Analysis of Structures

S0767

RSA (ROBOT Structural Analysis) RSA (ROBOT Structural Analysis) RSA (ROBOT Structural Analysis) SAP2000

Analysis to Code of Practice for Structural Use of Concrete 2004 Analysis and Design to Code of Practice for Structural Use of Concrete 2004 Static Linear Analyssi Part Elastic Critical Load Factor Analysis - Static linear analysis only - Only desault "Area Factor 1.0" in stiffness options of building analysis is allowed - User may need to assess the effect of differential elastic shortening of column/wall elements - Transfer plate is modelled by grillage of beams - Analysis of inclined wall and pile cap is not included Design to Code of Practice for Structural Use of Concrete 2004 Analysis and Design to code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part

12.0.2

2013-01-13

S0768 S0769 S0770

STRAND7 Cedrus 5 Cedrus 5

2.3.7 1.30 1.30

2020-03-16 2019-05-08 2019-05-08

S0771

Cedrus 5

1.30

2019-05-08

S0772 S0773 S0774 S0775

GTSTRUDL GTSTRUDL GTSTRUDL BEAM - 2004

30 30 30 3.0

2017-12-21 2017-12-21 2017-12-21 2019-02-28

Second Order Analysis Inclusion of member imperfections is not automatic and must be input manually Static Linear Analysis Part Static Linear Analysis for Plate Structures Only Dynamic Frequency Analysis for Plate Structures Only Flexural Design for Reinforced and Pretressed Concrete to Code of Practice for Structural Use of Concrete 2004 for Plate Structural Only The user is required to input the appropriate reduction factor a and concrete ultimate strain e to make sure the design is in accordance with the Code of Practice for Structural Use of Concrete 2004 (second edition) based on BS 8110:1985) Static Linear Analysis Part Concrete Design to BS 8110: 1985 Steel Design to BS 5950: 1990

S0765 S0766

2012-10-22

Remarks Analysis and Design of Continuous Slabs and Beams to Code of Practice for Structural Use of Concrete 2004 Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2004 with Concrete Grade not exceeding C45 ( Static Linear Analysis and Natural Frequency Analysis of Structures ) * * The users may need to assess the effect of differential axial shortening of column/wall elements

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0776 S0777

Version 3.0 5.41

Valid Till 2019-02-28 2013-02-23

2010

2013-03-22

S0779

RSA ( ROBOT Structural Analysis) S-Frame

7.0

2013-04-26

S0780 S0781 S0782

S-Frame SAFE SAFE

7.0 12.2.0 12.2.0

2013-06-09 2016-12-22 2016-12-22

S0783 S0784

CADS ANALYSE 3D Orion

3.72 R16*

2013-09-08 2019-11-27

S0785

Orion

R16

2019-11-27

S0786 S0787

SAP2000 SAP2000

14.2.0 14.2.0

2020-01-09 2020-01-09

S0788

SAP2000

14.2.0

2020-01-09

S0789

1.91

2013-10-18

S0790 S0791

CADS RC COLUMN DESIGNER CADS RC BEAM DESIGNER ADSEC

3.51 8.2

2013-10-10 2016-09-26

S0792

ADC

8.3

2016-09-26

S0793 S0794 S0795

Oasys GSA for Windows Oasys GSA for Windows SPACE GASS

8.5 8.5 10.81

2013-10-24 2013-10-24 2013-11-08

S0796 S0797 S0798

SPACE GASS SPACE GASS SPACE GASS

10.81 10.81 10.81

2013-11-08 2013-11-08 2013-11-08

S0778

Program COLUMN - 2004 SAP90

Remarks - "Beam on Elastic Foundation" Approach of 2D Analysis for Earth Retaining Structures - "Beam on Elastic Foundation" approach is restricted to the limitations as stipulated under Chapter 5.4.6 of GCO Publication 1/90 - " Review of Design Methods for Excavations" P-Delta only Elastic Analysis by Moment Amplification - "Beam on Elastic Foundation" Approach of 2D-Analysis for Earth Retaining Structures - Beam on Elastic Foundation" approach is restricted to the limitations as stipulated under Chapter 5.4.6 of GCO Publication 1/90 - "Review of Design Methods for Excavations" Tension Structure Analysis Static Linear Analysis Part Concrete Design to Code of Practice for Structural Use fo Concrete 2004 Static Linear Analysis Part for 2D Structures 1. Static linear analysis only 2. Only default "Area Factor 1.0" in stiffness options of building analysis is allowed 3. Users may need to assess the effect of differential elastic shortening of column/wall elements. 4. Transfer plate is modelled by grillage of beams 5. Analysis of inclined wall and pile cap is not included Design to Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Linear Elastic Buckling Analysis of Frame and Shell Only Second Order Analysis Inclusion of memeber imperfections is not automatic and must be nput manually. Design to BS 8110: 1985 Design to BS 8110: 1985 Analysis to Code of Practice for Structural Use of concrete 2004 and PNAP 296 Analysis and Design to Code of Practice for Structural Use of Concrete 2004 and PNAP 296 Static Linear Analysis Part Elastic Critical Load Factor Analysis - Analysis of plate element is not included - Static Linear Analysis Part Analysis of Elastic Critical Load Steel Design to BS 5950: 1990 Steel Design to Code of Practice for the Structural Use of Steel 2005

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0799

Program SPACE GASS

Version 10.81

Valid Till 2013-11-08

S0800 S0801

SPACE GASS Membrane

10.81 1.42

2013-11-08 2013-12-30

S0802 S0803

STRAND7 STRAND7

2.4.4 2.4.4

2017-05-06 2017-05-06

S0804 S0805 S0806 S0807 S0808 S0809

STRAND7 STRAND7 ETABS ETABS SAFE SAFE

2.4.4 2.4.4 9.7.2 9.7.2 12.3.1 12.3.1

2017-05-06 2017-05-06 2020-04-24 2020-04-24 2020-08-21 2020-08-21

S0810 S0811 S0812 S0813

GTSTRUDL GTSTRUDL GTSTRUDL ADAPT-ABI

31 31 31 4.5

2017-08-18 2017-08-18 2017-08-18 2014-08-23

S0814 S0815 S0816

STRAND7 S-Frame ADAPT BUILDER Floor Pro 2009/2010

2.3.8 R11

2014-08-25 2017-10-13 2014-11-08

S0817 S0818

1.0 v.2012

2015-01-30 2015-02-28

v.2012

2015-02-28

Elastic Critical Load Factor Analysis

v.2012

2015-02-28

Natural Frequency Analysis of Structures

v.2012

2015-02-28

P-D-only Elastic Analysis by Moment Amplification

S0822

SODA RSA (Robot Structural Analysis Professional) RSA (Robot Structural Analysis Professional) RSA (Robot Structural Analysis Professional) RSA (Robot Structural Analysis Professional) IDS-CB8110 Module

Remarks - Second Order Analysis - Inclusion of member imperfection is not automatic and must be input manually Dynamic Frequency Analysis for Space Frame Static Linear Analysis of Steel Structure with Geometric Non-linear Cable and Tension Membrane Only Static Linear Analysis Part Static Geometric Non-linear Analysis for Beam, Truss, Plate & Shell Elements Elastic Critical Load Factor Analysis Natural Frequency Analysis of Structures Static Linear Analysis Part Gravity Load Collection Static Linear Analysis Part Concrete Design to Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part Concrete Design to BS8110:1985 Steel Design to BS 5950: 1990 Post-Tensioning Analysis only to Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part Static Linear Analysis Part Only Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2004 with Concrete Grade not exceeding C60 Static Linear Analysis Part Static Linear Analysis Part

8.0

2015-03-05

S0823

SAP2000

15.1.0

2018-05-07

S0824

SAP2000

15.1.0

2018-05-07

S0825 S0826 S0827 S0828 S0829 S0830 S0831

SAP2000 Statik 5 Oasys ALP Oasys GSA for Windows Oasys GSA for Windows inTENS SODA

15.1.0 2.01 19.1 8.6 8.6 5.6 1.0

2018-05-07 2018-05-10 2018-05-10 2015-05-02 2015-05-02 2015-05-20 2015-06-10

The application is limited to continuous beam analysis and RC design to Code of Practice for Structural Use of Concete grade not exceeding C45. Static Linear Analysis Part ( The users may need to asscess the effect of differential axial shortening of column/wall elements.) Linear Elastic Buckling Analysis of Frame and Shell Only Second Order Analysis Static Linear Analysis Part

S0832

S-Frame

R11

2018-06-15

S0819 S0820 S0821

Static Linear Analysis Part Elastic Critical Load Factor Analysis Tension Structure Analysis Non Linear Analysis and Design to Code of Practice for Structural Use of Steel 2005 Second order P-D-only Elastic Analysis Only to Code of Practice for Structural Use of Steel 2005

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0833

Program S-Steel

S0834 S0835

Version R11

Valid Till 2018-06-01

Repute SuperSTRESS

2.0 7.1C

2015-07-22 2015-07-25

S0836

SuperSTRESS

7.2C

2018-08-30

S0837

v.2013

2018-12-23

v.2013

2018-12-23

Elastic Critical Load Factor Analysis

v.2013

2018-12-23

Natural Frequency Analysis of Structures

v.2013

2018-12-23

P-D-only Elastic Analysis by Moment Amplification

S0841 S0842 S0843 S0844

RSA (Robot Structural Analysis Professional) RSA (Robot Strucrural Analysis Professional) RSA (Robot Structural Analysis Profressional) RSA (Robot Structural Analysis Profressional) GTSTRUDL GTSTRUDL GTSTRUDL NAF-NIDA

Remarks Steel Design to Code of Practice for Structural Use of Steel 2005 Linear Soil Model Only -Static linear analysis Part -The users may need to assess the effect of differential axial shortening of column/wall elements -Static linear analysis Part -The users may need to assess the effect of differential axial shortening of column/wall elements Static Linear Analysis Part

32 32 32 9

2018-07-16 2018-07-16 2018-07-16 2018-07-16

S0845

SAP2000

15.1.0

2015-10-04

S0846

WALL8

2010

2015-10-07

S0847

Prokon A3

W2.5.45

2019-06-05

S0848

PLATE

1.0

2015-11-06

S0849 S0850 S0851 S0852

SPACE GASS SPACE GASS SPACE GASS SPACE GASS

11 11 11 11

2018-09-18 2018-09-18 2018-09-18 2018-09-18

S0853 S0854 S0855 S0856

SPACE GASS SPACE GASS SODA SODA

11 11 2.0 2.0

2015-11-14 2015-11-14 2020-01-03 2020-01-03

Static Linear Analysis Part Concrete Design to BS 8110:1985 Steel Design to BS5950: 1990 Non-linear Analysis and Design to Code of Practice for the Structural Use of Steel 2011 Tension and Compression Only Analysis of Frame Member Wall Design to Code of Practice for Structural Use of Concrete 2004 Space Frame Analysis (Static Linear Analysis Part Only) Analysis and Design of Plate Structure to Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part Analysis of Elastic Critical Load Steel Design to BS 5950: 1990 Steel Design to Code of Practice for the Structural Use of Steel 2011 Second Order Analysis Dynamic Frequency Analysis for Space Frame Static Linear Analysis Part Non Linear Analysis and Design to Code of Practice for Structural Use of Steel 2011

S0857 S0858 S0859 S0860 S0861

BEAM 2 ETABS PRODAS 2004 - Slab Module PRODAS 2004 - Beam Module PRODAS 2004 - Column Module PRODAS 2004 - Corewall Module Orion R17

2011 9.5.0

2016-01-03 2016-03-03 2016-03-25 2016-03-25 2016-03-25

Eigenvalue Analysis Concrete grade not exceeding C100 Concrete grade not exceeding C100 Concrete grade not exceeding C100

2016-03-25

Concrete grade not exceeding C100

2019-11-27

- Analysis and Design to Code of Practice for Structural Use of Concrete 2004 - Only default "Area Factor 1.0" in stiffness options of building analysis is allowed. - Users may need to assess the effect of differential elastic shortening of column/wall elements. - Transfer plate is modeled by grillage of beams. - Analysis of pile cap is not included.

S0838 S0839 S0840

S0862 S0863

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0864 S0865 S0866 S0867 S0868 S0869 S0870 S0871 S0872 S0873 S0874 S0875 S0876 S0877

Program WALL 8 ETABS ETABS BEAM2 PRODAS 2013 - Slab Module PRODAS 2013 - Beam Module PRODAS 2013 - Column Module PRODAS 2013 - Corewall Module SAFE SAFE CADS RC BEAM DESIGNER CADS RC COLUMN DESIGNER CADS ANALYSE 3D CBHK2013

Version 2013

Valid Till 2020-01-17

9.7.4 9.7.4 2013

2019-06-06 2019-06-06 2020-01-17 2019-09-08 2019-09-08 2019-09-08

Remarks - Wall Design to Code of Practice for Structural Use of Concrete 2004 and 2013 Static Linear Analysis Part Gravity Load Collection Concrete grade not exceeding C100 Concrete grade not exceeding C100 Concrete grade not exceeding C100

2019-09-08

Concrete grade not exceeding C100

12.3.2 12.3.2

2019-09-07 2019-09-07

4.03 2.03

2016-07-24 2016-07-24

Static Linear Analysis Part Concrete Design to Code of Practice for Structural Use of Concrete 2004 Design to BS8110: 1985 Design to BS8110: 1985

4.12 3.0

2016-07-28 2019-07-19

S0878

ADAPT BUILDER Floor Pro 2012

2020-01-05

S0879

SAD Modules: BEAM - 2013

4.0

2019-08-17

S0880

4.0

2019-08-17

S0881

SADS Modules: COLUMN 2016 SADS Modules: WALL - 2013

4.0

2019-08-17

S0882

Orion R18*

S0883

Membrane

2.16

2020-01-03

S0884 S0885

NIDA-MNN ADAPT-PT

2013 2012

2019-11-24 2017-01-05

S0886 S0887 S0888 S0889

ETABS ETABS SAP2000 SAP2000

13.1.3 13.1.3 16.0.2 16.0.2

2017-01-27 2017-01-27 2017-02-19 2017-02-19

S0890 S0891

SAP2000 SAP2000

16.0.2 16.0.2

2017-02-19 2017-02-19

S0892 S0893

Strand 7 Strand 7

2.4.6 2.4.6

2020-02-19 2020-02-19

S0894 S0895 S0896 S0897

Strand 7 Strand 7 S-FRAME S-FRAME

2.4.6 2.4.6 9.02 9.02

2017-02-27 2017-02-27 2020-02-06 2020-02-06

2019-11-27

Static Linear Analysis Part for 2D Structures Continuous Beam Analysis and RC Design to Code of Practice for Structural Use of Concrete 2013 with Concrete grade not exceeding C70 Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2004 with Concrete Grade not exceeding C60 Design for Code of Practice for Structural Use of Concrete 2013 Design for Code of Practice for Structural Use of Concrete 2013 Design for Code of Practice for Structural Use of Concrete 2013 - Only default "Area Factor 1.0" in stiffness options of building analysis is allowed. - Users may need to assess the effect of differential elastic shortening of column/wall elements. - Transfer plate is modeled by grillage of beams. - Analysis of pile cap is not included. Static Linear Analysis of Steel Structure with Geometric Non-linear Cable and Tension Membrane Only Large Deflection Analysisof Cable Net Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis Part Gravity Load Collection Static Linear Analysis Part Linear Elastic Buckling Analysis of Frame and Shell Only Second Order Analysis Tension and Compression Only Analysis of Frame Member Static Linear Analysis Part Static Geometric Non-linear Analysis for Beam, Truss, Plate & Shell Elements Elastic Critical Load Factor Analysis Natural Frequency Analysis of Structures Static Linear Analysis Part Tension Structure Analysis Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0898 S0899 S0900 S0901 S0902 S0903 S0904 S0905 S0906

Program Tower Peak Prokon C13 STAAD.Pro V8i SELECTseries 5 SAFE SAFE

Version 3.0

Valid Till 2020-05-03

W.2.6.11 20.07.10.4 1 14.0.0 14.0.0

2020-06-11 2020-07-18 2020-06-25 2020-06-25

1.1 8.7 8.7 2014

2017-06-19 2020-05-07 2020-05-07 2017-06-24

Static Linear Anslysis Part Concrete Design to Code of Practice for Structural Use of Concrete 2013 Static Linear Analysis Part Static Linear Analysis Part Elastic Critical Load Factor Analysis Static Linear Analysis Part

2014

2017-06-24

Elastic Critical Load Factor Analysis

2014

2017-06-24

Natural Frequency Analysis of Structures

2014

2017-06-24

P-D-only Elastic Analysis by Moment Amplification

33 33 33 12 12 12

2017-07-28 2017-07-28 2017-07-28 2017-08-05 2017-08-05 2017-08-05

Static Linear Analysis Part Concrete Design to BS8110:1985 Steel Design to BS 5950: 1990 Static Linear Analysis Part Analysis of Elastic Critical Load Steel Design to Code of Practice for the Structural Use of Steel 2011 Second Order Analysis Dynamic Frequency Analysis for Space Frame [BD ref. No. S0917] Static Linear Analysis Part and Design to Code of Practice for Structural Use of Steel 2011 - BEAM - 2013 is a program for analyzing continuous beam and designing beam section complying with the Code of Practice for Structural Use of Concrete 2013 (the Code). This is an upgraded version from version 4.0 by incorporating the requirements of the Fire Limit State Design as stipulated in the Code of Practice for Structural Use of Concrete 2013. - COLUMN - 2013 is program for designing column sections according to the Code. This is an upgraded version from version 4.0 by incorporating the requirements of the Fire Limit State Design as stipulated in the Code of Practice for Structural Use of Concrete 2013. - WALL - 2013 is program for designing wall sections according to the Code. This is an upgraded version from version 4.0 by incorporating the requirements of the Fire Limit State Design as stipulated in the Code of Practice for Structural Use of Concrete 2013. Static Linear Elastic Analysis Part Only Continuous Beam/Slab Design Analysis and Design to Code of Practice for Structural Use of Concrete 2004 Analysis to Code of Practice for Structural Use of concrete 2013

S0910 S0911 S0912 S0913 S0914 S0915

MIDAS Gen 2014 Oasys GSA for Windows Oasys GSA for Windows RSA (ROBOT Structural Analysis Professional) RSA (ROBOT Structural Analysis Professional) RSA (ROBOT Structural Analysis Professional) RSA (ROBOT Structural Analysis Professional) GTSTRUDL GTSTRUDL GTSTRUDL SPACE GASS SPACE GASS SPACE GASS

S0916 S0917

SPACE GASS SPACE GASS

12 12

2017-08-05 2017-08-05

S0918

COMPOS

8.4

2017-08-11

S0919

BEAM – 2013

5.0

2020-08-10

S0920

COLUMN – 2013

5.0

2020-08-10

S0921

WALL - 2013

5.0

2020-08-10

S0922 S0923 S0924

RM Bridge Prokon C01 TowerStruct

V8i W.2.6.06 1.0

2017-09-29 2017-10-21 2018-01-12

S0925

AdSec

8.3

2018-01-20

S0907 S0908 S0909

Remarks Reinforced Concrete Design to Code of Practice for Structural Use of Concrete 2013 General Column Design Static Linear Analysis Part

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0926

Program ADC

Version 8.4

Valid Till 2018-01-21

S0927 S0928

SAP2000 SAP2000

17.1.1 17.1.1

2018-02-04 2018-02-04

S0929 S0930

SAP2000 SAP2000

17.1.1 17.1.1

2018-02-04 2018-02-04

S0931 S0932 S0933 S0934 S0935 S0936 S0937 S0938

ETABS ETABS LimitState: Slab SAP2000 ETABS ETABS SAFE SAFE

13.2.2 13.2.2 1.0.d 17.1.1 15.1.0 15.1.0 14.1.1 14.1.1

2018-02-15 2018-02-15 2018-08-05 2018-08-13 2018-08-10 2018-08-10 2018-08-10 2018-08-10

S0939

ADAPT-Builder 2012, ADAPT-Floor Pro

S0940 S0941 S0942 S0943

ETABS ETABS SAP2000 SAP2000

15.2.0 15.2.0 18.0.1 18.0.1

2019-03-23 2019-03-23 2019-03-30 2019-03-30

S0944 S0945

SAP2000 SAP2000

18.0.1 18.0.1

2019-03-30 2019-03-30

S0946 S0947

SAP2000 SAFE

18.0.1 14.1.1

2019-03-30 2019-07-28

S0948 S0949 S0950

ETABS SPACE GASS SPACE GASS

15.2.0 12.5 12.5

2019-08-03 2019-08-08 2019-08-08

S0951

SPACE GASS

12.5

2019-08-08

S0952 S0953 S0954 S0955

SPACE GASS SPACE GASS inTENS SAFE

12.5 12.5 6.4 14.1.1

2019-08-08 2019-08-08 2019-09-06 2019-09-07

S0956 S0957

LimitState: Slab RCD2016

2.0.b 2.1

2019-09-29 2020-02-20

S0958 S0959 S0960 S0961 S0962

ETABS ETABS ETABS SAFE SAFE

16.0.1 16.0.1 16.0.1 14.2.0 14.2.0

2020-03-01 2020-03-01 2020-03-01 2020-03-08 2020-03-08

S0963

SAFE

14.2.0

2020-03-08

2018-10-26

Remarks Analysis and Design to Code of Practice for Structural Use of concrete 2013 Static Linear Analysis Part Linear Elastic Buckling Analysis of Frame and Shell Only Second Order Analysis Tension and Compression Only Analysis of Frame Member Static Linear Analysis Part Gravity Load Collection Stage Construction Analysis Part Static Linear Analysis Part Gravity Load Collection Static Linear Anslysis Part Concrete Design to Code of Practice for Structural Use of Concrete 2013 Post-Tensioning Analysis and Design to Code of Practice for Structural Use of Concrete 2013 with Concrete Grade not exceeding C60 Static Linear Analysis Part Gravity Load Collection Static Linear Analysis Part Linear Elastic Buckling Analysis of Frame and Shell Only Second Order Analysis Tension and Compression Only Analysis of Frame Member Stage Construction Analysis Part Post Tensioning Design of Slabs and Beams to Code of Practice for Structural Use of concrete 2013 – Non-ductility Design Only Staged Construction Analysis Static Linear Analysis Part Analysis of Elastic Critical Load to Code of Practice for the Structural Use of Steel 2011 Steel Design to Code of Practice for the Structural Use of Steel 2011 Second Order Analysis Dynamic Frequency Analysis for Space Frame Tension Structure Analysis Nonlinear Analysis with Tension/Compression only Supports Reinforced Concrete Sections - Design to Code of Practice for Structural Use of Concrete 2013 Static Linear Analysis Part Gravity Load Collection Staged Construction Analysis Static Linear Analysis Part Concrete Design to Code of Practice for Structural Use of Concrete 2013 Nonlinear Analysis with Tension/Compression only Supports

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0964

Program SAFE

Version 14.2.0

Valid Till 2020-03-08

S0965

RCD2016

2.1

2020-03-30

S0966

AdSec

8.4

2020-04-09

S0967

MIDAS Civil 2015

1.3

2020-05-03

S0968

VLA-SLIB

1.0

2020-05-17

S0969

SCIA Engineer

15.2

2020-05-23

S0970

OASYS GSA for Windows

8.7

2020-06-18

S0971 S0972 S0973 S0974 S0975 S0976

SKYCIV Structural 3D ETABS ETABS ETABS SAP2000 SAP2000

2 16.1.0 16.1.0 16.1.0 19.1.0 19.1.0

2020-06-19 2020-06-19 2020-06-19 2020-06-19 2020-06-21 2020-06-21

S0977 S0978

SAP2000 SAP2000

19.1.0 19.1.0

2020-06-21 2020-06-21

S0979 S0980 S0981

SAP2000 SAFE SAFE

19.1.0 16.0.1 16.0.1

2020-06-21 2020-06-25 2020-06-25

S0982

SAFE

16.0.1

2020-06-25

S0983

SAFE

16.0.1

2020-06-25

Remarks Post Tensioning Design of Slabs and Beams to Code of Practice for Structural Use of concrete 2013 – Non-ductility Design Only Steel Sections and Composite Sections - Design to Code of Practice for the Structural Use of Steel 2011 Analysis to Code of Practice for Structural Use of Concrete 2013 and Code of Practice for Structural Use of Concrete 2004 Static Linear Analysis, Non-linear Analysis, Staged Construction Analysis VLA-SLIB comprises a series of program functions for performing specific structural engineering calculation: (i) VLA_areaintegral - calculating the values of a double integral performed over a specified region; (ii) VLA_lineprop - calculating the properties (area, centroid, first moment of area and second moment of area) of a region formed by a group of narrow rectangular strips; (iii) VLA_areaprop - calculating the properties (area, centroid, first moment of area and second moment of area) of a region; (iv) VLA_stressdist1 - calculating the equivalent line loads for a region formed by a group of narrow rectangular strips when subject to vertical loads and moments; (v) VLA_stressdist2 - calculating the stress distribution underneath a user specified region when subject to vertical loads and moments; (vi) VLA_rokcone - calculating the total weight of rock cone, soil above cone or both soil and rock cone within a feasible zone for a rock socketed pile Static Linear Analysis and Second Order P-D-only Elastic Analysis Pattern Load Analysis to the Code of Practice for Structural Use of Concrete 2013 and Code of Practice for the Structural Use of Steel 2011 Static Linear Analysis Static Linear Analysis Part Gravity Load Collection Staged Construction Analysis Static Linear Analysis Part Linear Elastic Buckling Analysis of Frame and Shell Only Second Order Analysis Tension and Compression Only Analysis of Frame Member Stage Construction Analysis Part Static Linear Analysis Part Concrete Design to Code of Practice for Structural Use of Concrete 2013 Nonlinear Analysis with Tension/Compression only Supports Post Tensioning Design of Slabs and Beams to Code of Practice for Structural Use of concrete 2013 – Non-ductility Design Only

Last revision date: 15/9/2017

Pre-accepted Structural Program Program Reference S0984

S0985 S0986 S0987

Program ETABS

CADS RC BEAM DESIGNER CADS RC COLUMN DESIGNER ANSYS Solid185

Version 16.1.0

Valid Till 2020-07-10

4.10 2.10

2020-07-11 2020-07-11

Remarks Concrete Reinforcement Design of Slabs and Plates to Code of Practice for Structural Use of Concrete 2013 Design to BS8110: 1985 Design to BS8110: 1985

16.0

2020-08-08

Static Linear Analysis Part

 

Last revision date: 15/9/2017