Premier Metrology Solutions - Digital Measurement Metrology

6 downloads 214 Views 4MB Size Report
The DMM Group of Companies provide sales, accredited calibration, service, installation ...... OVM PRO Software: advance
PRECISION IS OUR VISION

Premier Metrology Solutions

LABORATORY ACCREDITATION BUREAU

ACCREDITED ISO/IEC 17025

DMM10-CA

www.dmm.ca

Certificate # L1048-1 Calibration, Testing & Dim Insp

1-866-960-9400

index

FORCE MEASUREMENT

4 5 6 7 8

digital force gauges & remote load/torque sensors digital force gauges & manual test stands material testing machines force testers torque and force measurement solutions

PROCESS INSTRUMENTS

9 10 11 12 13 14 15 16 17

sound and light meters durometers clamp meters digital multimeters infrared thermometers moisture meters, hygrometers and anemometers tachometers and stroboscopes thickness meters specialty meters

CALIBRATION INSTRUMENTS

18 19 20

process signal calibrators temperature calibrators pressure calibrators

OPTICAL INSTRUMENTS

21 22 23

video measuring systems profile projectors coordinate measuring machines

DIGITAL SCALES

24

scales and balances

TOOLS AND INSTRUMENTS

25 26 27 28

digital calipers height gauges dimensional instruments special gauges

CALIBRATION SERVICES

29 30 31 For technical assistance and orders please contact us:

2

1-866-960-9400 www.dmm.ca

DMM Lab offers 360° of services accredited in-lab calibration and inspection services accredited on-site calibration and repair services

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

about us

About Us over 25 years in metrology "As an accredited corporation to ISO/IEC 17025-2005, including the relevant requirements of ISO 9002-2000, We are dedicated to meeting and exceeding the highest industry standards for quality, value, service and technological advancement in the field of Metrology. Our attitude is to be the leader in this field. The ongoing education and empowerment of our personnel will undoubtedly keep us in the forefront of this science. We strongly believe in a strategy of continuous improvement and solid teamwork." “On a Quest for Better Measurements” The DMM Group of Companies provide sales, accredited calibration, service, installation, contract calibration management and training on major metrology equipment. DMM represents a number of high profile and respected manufacturers within North America and around the world. For more than 25 years, Digital Measurement Metrology Inc. has provided a high level of service and installation of metrology instruments for a number of high profile manufacturers across Canada. We strongly believe in quality work, customer satisfaction, and the embracing of technological advancement as reflected in our Mission Statement. SALES

ACCREDITED CALIBRATION

DMM’s Canadian Head Office is located at: 26 Automatic Road - Unit 4 Brampton, ON, L6S 5N7, Canada

SERVICES

DMM’s advantages History: a well established history of honesty and integrity High quality at a competitive price Wide range of services including on-site calibration of large equipment and contract management, repairs and supplying of certified measurement solutions Fast Turnaround: 5 days or better on most calibrations! Largest scope of accreditation in the industry Most instruments sold with accredited calibration certificate Online Tracking of Calibrations - free of charge

LABORATORY ACCREDITATION BUREAU

ACCREDITED ISO/IEC 17025

Certificate # L1048-1 Calibration, Testing & Dim Insp

How To Order doing business with us is easy All prices in this catalog reflect net cost to you in Canadian dollars. Prices do not include freight to you and any applicable taxes. Although every effort is made to maintain published prices, they are subject to change without notice. BY PHONE

Call us at 1-866-960-9400 and one of our representatives will be happy to help you.

BY FAX

Fax order to us at (905) 790-9266

BY EMAIL

Send your order to [email protected]

ONLINE

Visit www.dmm.ca

or [email protected] (for calibrations)

PAYMENT: Net 30 days to established customers. We also accept C.O.D. orders, bank wire transfers, Visa, Mastercard and American Express.

We stand behind our products! Warranty terms subject to type of product - please see website for more info. Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

3

digital force gauges & remote load/torque sensors

from

E-DFE Force Gauges

$1,049 CAD

from

DFS-R Force Gauges

$1,569 CAD

intermediate force measurement

The CHATILLON® E-DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the E-DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The E-DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. All E-DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories, NIST Certificate of Calibration with data and 2 Year Warranty.

The CHATILLON® DFS-R Series features our dedicated remote SLC Series load sensors as opposed to an integral load sensor used in our standard DFS Series. The DFS-R Series can be supplied with the same load capacities as our DFS with the addition of a 1,000 lbf (5 kN) capacity. Measurement accuracy for all capacities is better than 0.1% of full scale. The DFS-R gauge comes standard with an RS-232 cable, carrying case, battery adapter/charger, testing accessories, NIST Certificate of Calibration with data and 2 Year Warranty.

FORCEMEASUREMENT.CA

product features

product features

• Two Models and Seven Capacities Each - DFE Series (No Outputs) - E-DFE Series (w/Digital & Analog Outputs) • Advanced Operating Modes - Normal - Peak Tension and Compression - Load Limits - Pass-Fail Limits • Statistical Calculations - Mean with Maximum and Minimum Values - Coefficient of Variation with Mean and Standard Deviation - Standard Deviation with Variance and Mean - % Differentiation

• Integral Loadcells - Accuracy ±0.25% Full Scale - Mechanical Overload Protection to 150% Full Scale • Simple Operator Interface - High Resolution Display - Menus, Prompts and Function Keys for Easy Use • Optional Outputs (Standard on E-DFE Models) - RS232 Serial Data - Mitutoyo Digimatic - +2Vdc Analog

specs/ordering info Part# E-DFE Series

from

• Dedicated or Interchangeable Sensors - Load and Torque Sensors - Accuracies to better than 0.1% Full Scale • Advanced Operating Modes - Peak Tension, Compression & Torque • Simple Operator Interface - Normal - High Resolution Dot-Matrix - % or Sharp Break Detection - Menus w/ Prompts for Easy Use - Load Comparisons/Averaging - Dedicated & Function Keys w/ Navigation Pod - Contact Closure • Statistical Calculations - Load Limits - Mean w/ Maximum & Minimum Values - Pass-Fail Limits - Coefficient of Variation w/ Mean & Std Dev • Standard Outputs - Std Dev w/ Variance & Mean - RS232 Serial Data, - % Differentiation Mitutoyo Digimatic, +2Vdc Analog

specs/ordering info

Range

Accuracy

PRICE

seven models: 2 to 500 lbf

± 0.25% full scale

from $1,049

SLC Series

$619 CAD

Part#

Range

DFS-R Series

from

Dedicated SLC Sensor shown with DFS-R-ND force gauge (sold separately)

1000 ohms ±100 1000 ohms ±100 2.0 mV/V 150% Full Scale ±0.05% Full Scale ±0.05% Full Scale ±1.0% Full Scale 30° to 120°F (-40° to 82°C)

SLC Series

Range various models from 0.5 to 10.000 lbf

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

PRICE from $1,569

STS Series

$1,219 CAD

remote torque sensors for DFS-R-ND Series

The CHATILLON® STS Series Torque Sensors are used exclusively with Chatillon DFS-R-ND Series digital gauges. These high accuracy sensors feature "smart technology" that is recognized by the force gauge. The gauge can determine the sensor capacity, scaling requirements and determine sensor status including overload history.

Input Resistance: Output Resistance: Rated Output: Safe Overload: Non-Linearity: Hysteresis: Zero Balance: Operating Temp:

specs/ordering info Part#

± 0.1% full scale

Remote STS Sensor shown with DFS-R-ND force gauge (sold separately)

product features

product features Input Resistance: Output Resistance: Rated Output: Safe Overload: Non-Linearity: Hysteresis: Zero Balance: Operating Temp:

Accuracy

nine models: 0.5 to 1000 lbf

remote load sensors for DFS-R-ND Series

The CHATILLON® SLC Series loadcells are designed to be used exclusively with the Chatillon DFS-R-ND Series digital indicator. SLC loadcells feature "smart technology". The DFS-R-ND digital indicator recognizes the loadcell and automatically scales the gauge to the capacity of the loadcell connected.

4

advanced digital force gauge w/ remote loadcell

1000 ohms ±100 1000 ohms ±100 2.0 mV/V 150% Full Scale ±0.05% Full Scale ±0.05% Full Scale ±1.0% Full Scale 30° to 120°F (-40° to 82°C)

specs/ordering info Accuracy

PRICE

± 0.25% / ± 0.5%

from $619

Part# STS Series

Range

Accuracy

various models from 3 to 200 in-lb

± 0.3%

PRICE from $1,219

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

digital force gauges & manual test stands

$559

DFX Force Gauge

CAD

from

DFS Force Gauge

$1,459 CAD

basic peak force measurement

designed for basic & complex applications

The CHATILLON DFX Series is an economical digital force gauge ideal for applications where users are interested in basic peak force measurement. The DFX is available in four capacities (10lbf, 50 lbf, 100 lbf, 200 lbf) and features an integral loadcell with a measurement accuracy of better than 0.5% full scale. The DFX Series operates using two (2) 9Vdc alkaline batteries or using the standard battery eliminator.

The CHATILLON DFS Series offers the best price performance of any digital force gauge available today. This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS may be equipped with integral loadcells or smart remote sensors for load measurement or torque measurement. Measurement accuracy is better than 0.1% full scale.

A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings. Loads are displayed in ozf, gf, lbf, kgf and N units. The DFX Series force gauges come with a carrying case, battery eliminator, flat and hook adapters.

A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, percentage and sharp break detection, loadcell actuation and direction.

product features

product features • Advanced Operating Modes - Normal - Peak Tension and Compression • Integral Loadcells - Accuracy ±0.5% Full Scale - Mechanical Overload Protection to 150% Full Scale • Simple Operator Interface - High Resolution Display - Menus, Prompts and Function Keys for Easy Use - Load Bargraph • Selectable Display Languages • Battery Operated with Automatic Shutoff Power Saver - Over 120 hrs of continuous use with two 9Vdc alkaline batteries - Supplied with Universal Battery Eliminator (US, UK, Euro style plugs) • 1 Year Warranty

specs/ordering info Part# DFX Series

from

• Integral Loadcells - Accuracy ±0.1% Full Scale - Mechanical Overload Protection to 150% Full Scale • Advanced Operating Modes - Normal - Peak Tension and Compression - % or Sharp Break Detection - Load Comparisons & Load Averaging - 1st Peak and Ultimate Peak - Contact Closure - Load Limits - Pass-Fail Limits

• Statistical Calculations - Mean with Maximum and Minimum Values - Coefficient of Variation with Mean and Standard Deviation - Standard Deviation with Variance and Mean - % Differentiation • Simple Operator Interface - High Resolution Display - Menus, Prompts and Function Keys for Easy Use • Standard Outputs - RS232 Serial Data, Mitutoyo Digimatic, +2Vdc Analog • NIST Calibration with Data - Available IEC/ISO17025 Cert with Uncertainty • 2 Year Warranty

specs/ordering info

Range

Accuracy

4 models: 10 to 200 lbf

± 0.5% full scale

PRICE from $559

Part#

Range

DFS Series

8 models: 0.5 to 500 lbf

Accuracy

PRICE

± 0.1% full scale

from $1,459

FORCEMEASUREMENT.CA

from

Manual Test Stands

$329 CAD

easy-to-use solutions for force measurement

w ww.s h imana.ca

SHWSTS034

SHWSTS033

SHWSTS032 Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

SHWSTS035 For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

5

material testing machines from

LR5KPlus

$19,599 CAD

twin column testing machines

The LR5K Plus testing machine combines high performance, flexibility and exceptional ease of use. It is ideal for testing applications up to 5 kN and designed equally for routine quality control testing and for performing complex multi-stage tests. The machine uses high accuracy interchangeable XLC Series load cells for tension, compression and cycling through zero force measurements. The LR5KPlus is microprocessor controlled, incorporating world proven 32-bit technology for highly accurate load measurement and rapid data acquisition.

product features • Simple to set up, operate and maintain • Constant load holding • Load rate control • Saves up to 600 test results

• 10 programmable test set ups • Flash upgradeable • Extended column options for testing high extension materials

specs/ordering info Part#

LR5KPlus 5kN

FORCEMEASUREMENT.CA

Force Capacity Crosshead Speed Speed Accuracy Loadcell Accuracy Load Resolution Extension Resolution Travel Data Sampling Rate Display Extensometer Inputs

± 0.5% of reading 6 rpm; - Contact: 1 sec. > 60 rpm • Detecting Distance: 50 to 150 mm (2 to 6") typically; 300 mm (12") max. • Display: 5 digit LCD 10 mm high • Power supply: 4 AA 1.5 V batteries

$319 CAD

acurate laser measurements

Range 6 - 99,999 rpm

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

• Strong flash light at low range and week flash light at high range • Flash timer control conserves flash tube life • External trigger allows unit to be automatically Synchronize with equipment • Display: 10 mm (0.4") LCD • Measures: FPM (Flashes Per Minute) • Resolution: - 0.1 FPM (50~999.9 FPM) - 1 FPM (over 1000 FPM) • Sampling Time: 0.3 second • External trigger level: 3-24 V • Strobe Flash tube: Xenon lamp • Power supply: 110V A.C.

specs/ordering info PRICE $319

Part# SHGLSB013

Range

Accuracy

PRICE

50 to 12,000 FPM

±(0.05%n + 1d)

$275

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

15

thickness meters

www.shima na .ca

from

Coating Thickness Gauges

$489 CAD

with built-in or remote F/NF probes

built-in F (SHGLTM008-F) or F/NF (SHGLTM009-FN) probe

These are easy to use digital thick ness meters with built in probes to measure Ferrous & Non-Ferrous substrates. The F probes measure the thickness of nonmagnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . Often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.

remote F/NF probe (SHGLTM010-FN)

The N probes (only for SHGLTM009-FN) measure the thickness of nonmagnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

PROCESSINSTRUMENTS.CA

product features • Automatic substrate recognition. • Manual or automatic shut down. • Two measurement mode: Single and Continuous • Metric/Imperial conversion • Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface (sold separately) • Display: 4 digits, 10 mm LCD • Range: 0~1250 um/0~50mil (other range may be specified) • Resolution: - 0.1 um (0~99.9um) - 1 um (over 100um) • Accuracy: ±1~3%n or 2.5 um or 0.1mil (Whichever is the greater) • PC interface: RS232C interface (Cable and software is not included) • Power supply: 4 x 1.5 AAA size battery • Comes with Carrying case, Operation manual, Calibration foils

$553 CAD Coating Thickness Refinishing Gauge

Probe

SHGLTM008-F SHGLTM009-FN SHGLTM010-FN SHGLAC066

Range

built-in F 0~1250 um / 0~50mil built-in F/NF 0~1250 um / 0~50mil remote F & NF 0~1250 um / 0~50mil Software, RS232 Cable & USB to Serial Adapter

This refinishing gauge meets the standards of both ISO2178 and ISO-2360 as well as DIN, ASTM and BS.

Range

Accuracy

Resolution

PRICE

0~1250 um 0~50mil

1~3%n or 2.5 um or 0.1mil

0.1 um (0~99.9um)

$553

For technical assistance and orders please contact us:

www.dmm.ca

1 um (over 100um)

Software, RS232 Cable & USB to Serial Adapter

1-866-960-9400

• Applicable to measure the thickness of many materials, e. g. Steel, Cast iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron. • Automatic power off to conserve power. • Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface (sold separately) • Display: 4 digits, 10 mm LCD • Sound velocity: 1000 ~9000 m/s • PC interface: RS232C interface (Cable and software is not included) • Power supply: 4 x 1.5v AAA battery • Comes with Carrying case, Operation manual, Ultrasonic sensor

specs/ordering info

specs/ordering info

SHGLAC066

high accuracy measurements

product features

• F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g.iron, nickle etc.). Used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, etc. • N probes measure the thickness of non-magnetic coatings on non-magnetic metals. • Automatic substrate recognition. • Two measurement mode: Single and Continuous with Metric/English conversion • Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface (sold separately) • Display: 4 digits, 10 mm LCD • PC interface: RS232C interface (Cable and software is not included) • Power supply: 4 x 1.5 AAA size battery • Comes with Carrying case, Operation manual, Calibration foils, Substrate

SHGLTM011

$489 $553 $553 $55

With high power of emission and broad range of receiving sensitivity, this Ultrasonic Thick ness Meter can match probes of different frequencies. That makes it easy to measure the roughsurface, even cast iron.

SHGLTM011 is suitable for the laboratory and for use in harsh field conditions. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

Part#

PRICE

Ultrasonic Thickness Meter

$410 CAD

built-in F/NF probes w/ automatic substrate recognition

product features

16

specs/ordering info Part#

Part# SHGLTM023 SHGLAC066

Range 1.2~200mm (45# steel)

Accuracy

Resolution

PRICE

0.5%n+0.1

0.1 mm/0.001 inch

$410 $55

Software, RS232 Cable & USB to Serial Adapter

$55 Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

speciality meters

w ww.s h imana.ca

Digital Vibration Meter

$553 CAD

Surface Roughness Tester

$1,833 CAD

designed for easy on site vibration measurements

Vibration is a reliable indicator of the mechanical health or condition of a particular machine or product. An ideal machine will have very little or no vibration indicating that the motor, as well as peripheral devices such as gearboxes, fans, compressors, etc., are suitably balanced, aligned, and well installed.

Widely used in production site to measure surface roughness of various machinery-processed parts, calculate parameters according to selected measuring condition and clearly display all measurement parameters.

product features

specs/ordering info

specs/ordering info

Part#

Accuracy

PRICE

± 5%+2 digits

$553 $55

Software, RS232 Cable & USB to Serial Adapter

Refrigerant Leak Detector

$219 CAD

• Multiple parameter measurement: Ra, Rz, Rq, Rt • Highly sophisticated inductance sensor • Four wave filtering methods : RC, PC-RC, GAUSS and D-P • Display Range: - Ra, Rq: 0.025-16.00um/1.000-629.9uinch - Rz, Rt: 0.020-160.0um/0.780-6299uinch • Maximum driving stroke: 17.5mm/0.7inch • Resolution: - 0.001um if reading < 10um - 0.01um if 10um = 100um • Evaluation length :( 1~5) cut-off optional • PC interface: RS232C (PC Software & Cables sold separately) • Power supply: rechargeable Li-ion battery • Comes with: Carrying case, Main unit, Standard sensor, Standard sample plate, Power adapter, Operation manual, Screwdriver, Adjustable leg, Sheath of sensor

Part# SHGLST022 SHGLAC066

Accuracy

PRICE

Not more than ±10%

$1,833 $55

Software, RS232 Cable & USB to Serial Adapter

$220 CAD

Carbon Monoxide Gas Detector

can detect even small leaks of refrigerant gases

This Refrigerant Leak Detector is effective in detecting existing refrigerants including HFC, HCFC, CFC, SF6,R134a, and R123. An increasing tick rate sounds as a leak is pinpointed and the red indication light flashes more rapidly. The flexible gooseneck probe is ideal for hard to reach areas.

This meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The IT-CO180 Gas Detector Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: above 200 PPM, the beeper sounds continuously with the concentration of CO; from 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.

product features

product features

• Microprocessor control with advanced digital signal processing • Quickly and accurately mark any leak spot • Semiconductor gas sensor • No user calibration required • Gases Sensed: - CFCs: R11, R12, R13; - HCFCs: R22, R502, R500; - HFCs: R134a, R123, R125, R23, R404A, R407C, R410A and other halogen based compounds • Sensitivity: - R22, 134a: Hi 6g/year // L: 30g/year - R404A, 407C, 410A: Hi 8g/year // L: 40g/year • Probe: 390mm (15") flexible stainless probe • Power Supply: One 9V alkaline battery • Includes: reference leak source and carrying case

• 3 1/2 Backlit Digital LCD Display • High Accuracy, quick response • Pocket size and easy to use • Fast sampling • Max, Data hold and Auto shut off • Utilizes a stabilized electrochemical gas specific fast response sensor • Audible alarm starts at 35ppm • Sensor type: Stabilized electrochemical Gas-specific (CO) - 3 years typical sensor life • Power supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent. • Includes: carrying case and 9V battery

specs/ordering info

specs/ordering info Part#

Response Time

Warm-up Time

PRICE

IT-C-380

less than 1 second

10 seconds

$219

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

highly accurate instrument

PROCESSINSTRUMENTS.CA

product features • Parameters measured: Velocity, Acceleration, Displacement RPM and Frequency • Measuring range: - Velocity: 0.01-40.00 cm/s true RMS (0.000-16.00 inch/s) - Acceleration: 0.1-400.0m/s2 equivalent peak (0.3-1312 ft/s) - Displacement: 0.001-4.000mm (0.04-160.0 mil , equivalent pk-pk) - RPM (r/min): 60-99,990 r/min (readings should be multiplied by 10 if the display show '10') - Frequency: 1-20 kHz • Frequency range for measuring: - Acceleration: 10Hz. to 1kHz / In '1' mode 10Hz. to 10kHz / In '10' mode for bearing condition check - Velocity: 10Hz. to 1kHz - Displacement : 10Hz. to 1kHz • PC interface: RS232C (PC Software & Cables sold separately) • Power supply: 4x1.5 AAA size batteries • Comes with: Powerful rare earth magnet, Accelerometer, Stinger probe (Cone), Stinger probe (Ball), Carrying case, Operation manual

SHGLVM024 SHGLAC066

multiple parameter measurement: Ra, Rz, Rq, Rt

Part# IT-CO-180

Range

Accuracy

Resolution

PRICE

0 to 1000PPM

±5% or ± 10 PPM

1PPM

$220

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

17

process signal calibrators

from

JOFRA ASC300

$2,475 CAD

from

JOFRA CSC200

$1,195 CAD

advanced signal calibrator

Substantial enough to cover all your needs for a process signal calibrator with superior accuracy and compact enough to fit into your tool box. The JOFRA ASC300 measures and sources: TCs, RTDs, current, voltage, frequency, and pulse trains. This instrument is also designed to be compatible with the JOFRA APM pressure modules, thus offering true multifunction operability.

The CSC line of signal calibrators is dedicated units designed to make your calibration and maintenance tasks easier to perform. The JOFRA CSC200 is engineered for the calibration of temperature instruments offering the ability to measure and simulate several different types of RTDs and TCs. This instrument makes the job easy by utilizing a thermocouple plug for easy connection and it can work with 2, 3, or 4-wire RTDs.

CALIBRATIONINSTRUMENTS.CA

product features

product features

• Simultaneous input and output • Input and output: - RTD: 14 different types, - TC: 13 different types, - Current 0-24 mA DC, - Voltage 0-20 V DC, - Frequency 0 to 10 Khz, - Pulse train output, - Resistance 5 to 4000 Ohm • Isolated read-back circuit with 24 VDC loop power • Fuseless protection on all inputs • APM pressure module input for pressure applications • Graphical user interface with function keys • Part of a complete marine program • Calibrate pressure using external pressure modules with accuracies up to 0.01% F.S. • Calibrate temperature using JOFRA dry-block calibrators with accuracies up to 0.04°C / 0.07°F. • Full remote control of all functions with the help of simple ASCII commands.

specs/ordering info Part#

please call

Thermocouple Calibrator

$695 CAD

Part# CSC200 Series from

$595 CAD

Accuracy up to +/-0.1°C / 0.18°F

PRICE please call

JOFRA mAcal Calibrator milliampere loop calibrator

precise source for calibration w ww.shima na .ca

This is the economical answer to easy and accurate loop calibration. Test all 4-20 mA loops in your process with this handy calibrator that sources, reads, steps through test points, converts readings to percentages, and more.

This Shimana Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures mV or 8 different type of TC in units of Celsius or Fahrenheit.

product features

product features • Thermocouple Types: J, K, T, E, N, R, S, B • Resolution: - TC: 0.1°C or 0.1°F (J, K, T, E, N); 1°C or 1°F (R, S, B). - DC mV: 10 V (110mV range); 0.1mV (1100mV range) • Measure/Source Voltage: -10 ~ 110mV / -110 ~ 1100mV • Measure/Source Thermocouple: J / K / T / E / R / S / B / N / L / U • Cold Junction Error: ±0.5°C (-0~50°C ) • Maximum voltage applied between any terminal and earth ground or between any two terminals: 30V • Safety: this meter complies with the standard CE EN61326 • Standard: NIST-175 • LCD size: 40 x 63mm • Power supply: 4 x 1.5 V AAA battery • Includes: Operating Manual, Test Lead (1 pair), Alligator Clip (1 pair), Carrying Case, Battery

specs/ordering info Part# SHUTCB054

Voltage: ±(0.04%+2)

1-866-960-9400 www.dmm.ca

• Stepless setting of the current in the entire measuring range • Measures the loop power in the range 0-45 V • Measures the current with a resolution of 0.001 mA • Special fixed steps stored for linear and flow transmitters or valve positioners, which means that the test will be easier to perform • Built-in fixed current values. 7 different programs • Choose between manual and automatic steps with 10 or 30 seconds between steps • One person can perform the entire test by placing the MACAL in the process loop and operate from the control room • Large display: Includes large numbers for unit reading, a percentage display, and dedicated icons for calibrator status including a low battery indicator.

specs/ordering info Best Accuracy

For technical assistance and orders please contact us:

18

• TC and RTD input/output • Reads and simulates temperature • Fuseless protection on all inputs • User defined setpoints with a recall function, selectable cold junction compensation, and installed curves for 14 RTD and 13 TC types • Part of a complete marine program • Use the CSC200 in conjunction with your JOFRA dry-block calibrators • Use the CSC200 to read a JOFRA reference probe to ensure that you have the proper temperature for your test point • Ranges -Input and Output: - RTD: 14 types Resistance: 0 to 4000 Ω (read) Resistance: 5 to 4 000 Ω (source) - TC: 13 types mV: -10 to 75 mV (read) mV: -10 to 75 mV (source)

specs/ordering info PRICE

Accuracy ±0.2°C / 0.36°F

ASC300 Series

compact signal calibrator

Thermocouple: ±0.04% ±1°C

PRICE $695

Part# 75-MACAL

Accuracy ±0.05% F.S.

PRICE please call

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

temperature calibrators from

JOFRA ATC

$7,495 CAD

advanced temperature calibrator

This is a complete, standalone, on-site, documenting test laboratory with timesaving automatic functions. The ATC employs a unique active dual-zone heating/cooling block ensuring optimum temperature homogeneity in the calibration zone of the block. With the latest ATC models it is now possible to calibrate even more sensors at the same time and to calibrate large and odd size sensors in either a large diameter dry-block or in a liquid bath. JOFRACAL calibration software is included. Two models of the ATC series (ATC-140 and ATC-250) fitted with a 150 mm (5.9 in) deep well with a diameter of 63.5 mm (2.5 in) can be used both as dry-block calibrators and as liquid calibration baths with a magnetic stirrer.

product features • 12 different models including liquid baths and large diameter dry-block calibrators • Input for external reference probe • Input for sensor-under-test • MVI stability circuitry • 100% automatic calibration

• RS232 interface with JOFRACAL calibration software • Several time-saving features • Temperature range -45° to 650°C -49° to 1202°F • 12-month accuracy to ±0.04°C / 0.07°F • Stability to ±0.02°C / 0.04°F

specs/ordering info ATC Series

Accuracy ±0.04°C / 0.07°F

from

PRICE please call

JOFRA ITC

$5,500 CAD

from

JOFRA DTI-1000

$3,095 CAD

industrial temperature calibrator

reference digital temperature indicator

The ITC series heating block employs a modified dual-zone principle derived from the ATC series. This ensures good temperature homogeneity in the calibration zone of the block. The ITC-320 and ITC-650 also use the same inserts as the ATC series. This design offers a deep immersion depth and a wide enough diameter to allow for simultaneous insertion of a reference probe and the sensor-under-test or for multiple sensor tests.

Wherever there is a demand for reliable and accurate temperature measurement, you may use the DTI-1000 reference thermometer and the STS series of reference probes.

The user-friendly interface is adopted from the smaller CTC series. A large, clear, backlit display shows a vast amount of information including “SET” temperature, current temperature, time to stability, stability status, and status during auto step and switch test operations.

product features

specs/ordering info ITC Series

The JOFRA DTI-1000 is a fully traceable thermometer recommended as the reference instrument to verify the true temperature in any type of process or temperature calibrator, liquid bath, or dry-block calibrator. Use the DTI-1000 and the STS probes as your working temperature reference in any calibration application or use the set-up directly in custody transfer applications where high accuracy (low uncertainty) means money.

product features

• 3 different models • Timesaving auto-stepping and • RS232 interface with JOFRACAL software thermo-switch test functions • 12-month accuracy to ±0.25°C / 0.45°F • Interchangeable inserts including • MVI stability circuitry multi-hole designs • Stability to ±0.03°C / 0.05°F • Central dual-zone • Temperature range -23° to 650°C / -9°F to 1202°F

Part#

CALIBRATIONINSTRUMENTS.CA

Part#

Accuracy ±0.18°C / 0.32°F

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

• Dual channel inputs • RS232 interface with JOFRACAL software • DTI-1000 accuracy to ±0.004°C / 0.009°F

• DTI-1000 + STS probe to ±0.03°C / 0.054°F • Temperature range -200° to 750°C /-328°F to 1382°F

specs/ordering info PRICE please call

Part# DTI-1000

Accuracy ±0.005°C (±0.009°F)

PRICE please call

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

19

pressure calibrators

from

JOFRA APC

$1,795 CAD

from

JOFRA CPC

$995 CAD

advanced pressure calibrator

The APC is available as an indicator or in one of 6 test-ready systems. You can use the APC in applications from safety valve verification to calibration of pressure transmitters. This series is designed to meet high accuracy pressure calibration applications and to make your tasks easier. The APC offers dual information display, transmitter supply, and scalable mA input for % error calculation. The accuracy of the APC calibrators is superior throughout the ranges and is temperature compensated for operations in machine room applications.

The JOFRA CPC series is designed for easy and reliable check and calibration of pressure. Use the CPC series in applications such as verification or calibration of pressure gauges, transducers, transmitters, pressure switches, and safety valves. The CPC series is recognized by its high quality and carefully selected features that save time and make calibration tasks easy to perform; e.g. dual information display, transmitter mA reading, min/max recording, peak reading, and semi-automatic pressure switch test finding the closing, opening, and the hysteresis pressure (dead band).

CALIBRATIONINSTRUMENTS.CA

product features

product features

• Available as an indicator or with a • Pressure ranges pump in a complete system – 0 to 10 psi / 0 to 0.7 bar w/ vacuum • 17 different pressure units – 0 to 30 psi / 0 to 2 bar w/ vacuum • Computer interface – 0 to 200 psi / 0 to 15 bar w/ vacuum • Easy front panel operation – 0 to 500 psi / 0 to 35 bar w/ vacuum • External pressure module capability – 0 to 1,000 psi / 70 bar • Reads, sources, and scales – 0 to 3,000 psi / 200 bar transmitters – 0 to 5,000 psi / 350 bar • Pneumatic handpumps from – 0 to 10,000 psi / 700 bar vacuum to 40 bar • Hydraulic pumps from 0 to 700 bar

specs/ordering info Part# APC Series from

compact pressure calibrator

• Available as an indicator or with a pump in a complete system – System A with pneumatic pressure handpump – System B with pneumatic combination handpump (pressure / vacuum) • 11 different pressure units • Measures loop current to 24 mA • Reads pressure and current simultaneously • Switch test function • Supplied with fittings for NPT or BSP threads • Pressure ranges – 0 to 10 psi / 0 to 0.7 bar with vacuum – 0 to 30 psi / 0 to 2 bar with vacuum – 0 to 200 psi / 0 to 15 bar with vacuum

specs/ordering info

Accuracy ±0.04% of reading + 0.01% of full scale

PRICE please call

Part# CPC Series

PRICE

Accuracy ±0.05% of full scale

please call

JOFRA IPI

$995 CAD

industrial pressure indicator

JOFRA IPI indicators are the latest addition to our range of pressure instruments. These handy instruments combine the ease of an analog gauge with the accuracy and easy-to-read display of a digital calibrator. The IPI offers a long battery life, high accuracy, and even serial communication. The accuracy of the IPI rivals that of a pressure calibrator and is temperature compensated for shop or machine room applications. This versatile unit is available as a stand-alone indicator or in a complete test system.

Test-ready pressure systems for the APC, CPC and IPI calibrators Pump system F APC and IPI

product features • Available as an indicator or with a pump in a complete system • Accuracy to ±0.05% of F.S. • 18 different pressure units • Ideal for on-site use • Lightweight and portable with temperature compensation and long battery life • Pneumatic handpumps from vacuum to 40 bar • Hydraulic pumps from 0 to 700 bar

• Pressure ranges – 0 to 15 psi / 0 to 1 bar w/ vacuum – 0 to 30 psi / 0 to 2 bar w/ vacuum – 0 to 100 psi / 0 to 7 bar w/ vacuum – 0 to 300 psi / 0 to 21 bar w/ vacuum – 0 to 500 psi / 0 to 35 bar w/ vacuum – 0 to 1,000 psi / 70 bar – 0 to 2,000 psi / 140 bar – 0 to 3,000 psi / 200 bar – 0 to 5,000 psi / 350 bar – 0 to 10,000 psi / 700 bar

specs/ordering info Part# IPI Series

Accuracy ±0.05% of F.S. for positive pressure

For technical assistance and orders please contact us:

20

1-866-960-9400 www.dmm.ca

PRICE

Pump system B

Pump system C

APC,CPC and IPI

APC and IPI

please call Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

video measuring systems

w ww.s h imana.ca

from

Economical Video Machines

$14,985 CAD

non-contact accurate measurements/inspection

This video measuring machine can effectively view and measure profiles, surface shapes, size, angle and position of various complex work places. It is especially useful in microscopic inspection and macroscopic control of precise parts. It is suitable for Product Development on Reverse Engineering, Quality Inspection of parts such as watch components, electronic connector assembly, stamping metal parts, plastic, rubber components, spring circuit boards, etc.

Includes PC Computer with Monitor, Windows XP and OVM PRO Software, floor bench and all standard accessories.

product features • High precision granite base and column. Contour and surface illumination features LED with focused adjustable surface and bottom lighting. • Manual quick release of microstage to allow smooth manual positioning. • Telecentric zoom lens with precise stops. • OVM PRO Software: advanced edge detection tools which allows for quick drag and drop of multiple feature measurement • This model is equipped with the 3rd “Z” axis for positioning and focus indicator for “Z” axis measurement.

specs/ordering info SHGXVS067

X.Y.Z. axis travel

250 x 150 x 200 (mm)

Overall size (including base) Loading weight of worktable

Resolution X.Y accuracy Repeatability accuracy CCD

300 x 200 x 200 (mm)

1000 x 650 x 1650 (mm) 30 Kg

Operating Mode Magnification

SHGXVS068

Manual Optics 0.7x - 4.5x Image 28x - 180x 0.001 mm (3+L/200)μm ±2 μm 410,000 pixel color CCD

Working environment

Temp 20±5°C Humidity 50%-60% from

$17,985 CAD

Intensifier-Type Video Systems integral video measuring systems

Semi-automatic measuring software is adopted for the instrument, with multiple automatic image measuring tools; thus avoiding visual errors. This instrument has functions of SPC statistic and tolerance analyses and editor programming and learning functions, etc.; data and images may be output to AutoCAD to carry out next step data processing.

OPTICALINSTRUMENTS.CA

Part#

product features • High-precision granite base and upright columns guarantee the measuring accuracy of the instrument, with more stable performance. • The lens with fixed multiplying factor locationing and the software is adapted; it is unnecessary to carry out linear correction. • The Z-axel and light illumination adjustment panel, adapted with the pre-front panel control and with human-based design, are convenient for operation.

specs/ordering info Part#

SHGXVS069

X.Y.Z. axis travel

250 x 150 x 200 (mm)

Overall size (including base) Loading weight of worktable Operating Mode Magnification

more models (including CNCs) available on our website www.OpticalInstruments.ca

Resolution X.Y accuracy Repeatability accuracy CCD Working environment

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

SHGXVS070 300 x 200 x 200 (mm)

800 × 500 × 1650 (mm) 30 Kg Advanced Manual control (quick switch included) Optics 0.7x - 4.5x Image 28x - 180x 0.001 mm (3+L/200)μm ±2 μm 410,000 pixel color CCD Temp 20±5°C Humidity 45%-75% For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

21

profile projectors

www.shima na .ca

from

$9.459 CAD

Horizontal Profile Projectors super precision, stable and reliable performance

This Horizontal Optical Projector main body is constructed of welded Heavy Gauge steel. It has a tastefully visual outward appearance and convenient operating parameters such as a Swingaway Lamp House, including vertical work piece holder. It’s high quality optical system allows for very clear viewing with imaging that is accurate in multiplying factors.

product features • High precision V-Grooved straight line slide ways which facilitates smooth table movement in the X, Y and Z axis. • Dual height intensities for transmission of indirect lighting can be adaptable to the measuring of variety of work pieces of different materials. • The fiber optic surface illuminates transmission for indirect lighting. It is small in dimension but high in brightness which makes it convenient to use • The table (Micro Stage) features light weight Aluminum coating, with less friction & smooth movement. The side movements are to 20 degree on either side for Angular measurement

specs/ordering info

OPTICALINSTRUMENTS.CA

Part# Screen diameter Rotating range Rotating angle resolution Rotating angle accuracy

SHGXOC071 Ø 350 mm 0°-360° 1’ 4’

Worktable size

400 mm x 150 mm

X.Y.Z axis travel Accuracy of the instrument X.Z. Resolution

200 x 80 x 150 mm (3+L/75) μm 0.001 mm

from

$8.459 CAD

Vertical Profile Projectors Ø300 digital measuring projector

This Digital COMPARAtor can effectively test several work-pieces with complex shapes, such as templates punching pieces, cams, gears, threads by profile comparative and coordinates measuring ways. It is widely used in different measuring departments and inspection stations of the following industries: machinery, electron, instrument & meter, science & research institute, etc, including space-flight & aviation industry.

product features • Two-kinds of illumination (high and low level) can meet the measuring requirements of various work pieces • Non-spherical surface illumination system is processed by special technique which makes view field be symmetrical & clear and guarantee a higher accuracy • Axial flow fans are used for a strong heat dissipation, this is incomparable in analog products • Small bulk, low weight, so it’s very easy to move around • Long-life illuminating bulb can meet long time purposes • It is equipped with various accessories, multi-functional counter and mini-printer • Surface illumination system can be adjusted conveniently, so it is stable and reliable and operation is also comfortable • Workable base adopts front-door design so maintenance is more convenient

specs/ordering info Part# Screen diameter Rotating range Rotating angle resolution Rotating angle accuracy

For technical assistance and orders please contact us:

22

1-866-960-9400 www.dmm.ca

SHGXOC072 Ø 300 mm 0°-360° 1’ 6’

Worktable size

340 mm x 152 mm

X.Y.Z axis travel Accuracy of the instrument X.Y. Resolution

150 x 50 x 80 mm (4+L/25) μm 0.001 mm Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

coordinate measuring machines

from

Phoenix Series

$22,595 CAD

fully automatic DCC CMM ready for your floor

Building on decades of experience with shop floor Coordinate Measuring Machines, Helmel now offers the PHOENIX… a heavy-duty, covered version of its popular Checkmaster. The PHOENIX is made for harsh environments, with well-placed covers that prevent temperature shock. Its steel measuring scales on metal structures assure uniform expansion. The PHOENIX CMM incorporates all the time-proven features of its “big brother”, the MICROSTAR: hardened precision-ground ways, dual beam bridge with reliable V-and-Flat bearing arrangement and intrinsic accuracy. The latter is very important to reliably retain accuracy over time and reduce calibration cost.

product features • Granite worktable • Dual beam bridge design • Hardened and ground ways • Precision bearings • Fully covered for protection • Electronic touch probe interface • Calibration sphere

• 3/8"-16 Clamping inserts (M10 optional) • USB computer interface connection • Die cast, rugged 3-axis joystick controller • Pentium computer system w/ Custom key labels • GeoWidget training part • Geomet 101 DCC software w/ user guide • 1-Year CMM warranty

Model Number Measuring Range

X Y Z

Weight Volumetric Accuracy Scale Resolution Repeatability

112RB

112-102

216-142

12” (300 mm) 12” (300 mm) 10” (250 mm)

12” (300 mm) 12” (300 mm) 10” (250 mm)

16”(400 mm) 20” (500 mm) 14” (350 mm)

440 lbs (200kg) 0.00032” (8 μm) 0.00002” (0.5μm) 0.00012” (3 μm)

436 lbs (198kg) 0.00034” (8.6 μm) 0.00002” (0.5μm) 0.00012” (3 μm)

616 lbs (280 kg) 0.00038” (9.6 μm) 0.00002” (0.5 μm) 0.00012” (3 μm)

Linear Accuracy 0.00018” + 0.000006”/in. (4.5μm + L/150μm)L in mm. Performance per ANSI B 89.4.1a-1998. Standard is based on dynamic measurements with electronic probe and 300mm ball bar. Tests are at 68°F and 50% relative humidity. Power requirements: 120V, 60Hz, 10A, grounded AC outlet. Mechanical accuracy is intrinsic without volumetric compensating software.

The compact Check master is a bench top CMM ideal for lab or production floor. Hardened stainless steel ways and steel scales on steel structures offer uniform linear expansion minimizing thermal errors. The low cost means you can put competent inspection capability in multiple locations throughout your plant.

from

$16,995 CAD

Checkmaster Series the best CMM value

OPTICALINSTRUMENTS.CA

specs/ordering info

product features • Granite worktable • Locks on all three axes • Zero-play fine adjustment on all axes • Electronic touch probe interface • GeoWidget training part • Calibration sphere

• 3/8"-16 Clamping inserts (M10 optional) • USB ProCounter II Interface • Pentium computer system w/ Custom key labels • Renishaw TP-ES touch probe kit • Geomet Junior software w/ user guide • 1-Year CMM warranty

specs/ordering info Model Number Measuring Range

X Y Z

Weight Volumetric Accuracy Scale Resolution Repeatability

112-102

216-142

12” (300 mm) 12” (300 mm) 10” (250 mm)

16”(400 mm) 20” (500 mm) 14” (350 mm)

153 lbs (69 kg) 0.00034” (8.6 μm) 0.000020” (0.5μm) 0.00016” (4 μm)

250 lbs (113 kg) 0.00038” (9.6 μm) 0.000020” (0.5 μm) 0.00016” (4 μm)

Linear Accuracy 0.00018” + 0.000006”/in. (4.5μm + L/150μm)L in mm. Performance per ANSI B 89.4.1a-1998. Standard is based on dynamic measurements with electronic probe and 200mm or 300mm ball bar. Tests are at 68°F and 50% relative humidity. Power requirements: 120V, 60Hz, 10A, grounded AC outlet. Mechanical accuracy is intrinsic without volumetric compensating software Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

23

scales and balances

from

FTC Series

$995 CAD

from

CPB Series

$495 CAD

counting scales

counting scales

plate eighing steel w d te ss le ra in st Sta , illu 00 mm 240 x 2 m m 0 4 350 x 2

Protective working cover over key pad and casing, standard, can be reordered at any time

Metal housing robust and sturdy

Total weight

Protective working cover over key pad and housing

DIGITAL-SCALES.CA

Back-lit LCD display digit height 16 mm

product features

specs/ordering info

KERN FTC FTC FTC FTC FTC FTC

3K0.1 6K0.2 15K0.5 15K0.5 L 35K1 60K2

FTC FTC FTC FTC FTC FTC

3K0.5 DM 6K1 DM 15K2 DM 15K2 DLM 35K5 DM 60K10 DM

Max = 15 kg, d 1 = 2 g (from 0-6kg), d 2 = 5 g (from 6-15kg)

Weighing Verific. Min. range value load

3 6

-

-

0,02 0,04

5 5

240x200 240x200

0,1 0,2 0,1

15 15 35

-

-

0,1 0,1 0,2

5 8 8

240x200 350x240 350x240

0,2

60

-

-

0,4

8

350x240

CPB Counting Scales - Easy counting at a bargain price! Ideal for limited spaces thanks to battery operation, flat compact construction and low weight. Adjustment program CAL guaranties the scales high accuracy. External test weights available at an additional price.

1,5|3 3|6

0,5|1 1|2

• Counting resolution 60.000 Pt. • Overall dimensions WxDxH 315x355x110 mm • Permitted environmental temperature -10 … +40 °C. • RS232 • Large LCD display digit height 20 mm. Back-lit, 3-way adjustable: • Permanent “on” • By load change “on” (for 3 sec ) • Permanent “off” • Target piece input check-weighing with an acoustic signal • Counting results memory adds up all individual counting operations, result is shown in total weight and total pieces • Precise counting: the automatic reference optimization gradually improves the average value of the piece weight • Battery operating time approx. 70 h without back lighting. Charging time approx. 12 h. AUTO-OFF-Function can be set after 1, 5 or 30 min • Charge condition indicator • 2 Years warranty

mm

d1 | d 2 = Dual-range scale (D = Dual) automatic change of readout 10 20

0,02 0,04

5 5

240x200 240x200

2|5 2|5 5|10

6|15 6|15 15|35

2|5 2|5 5|10

40 40 100

0,1 0,1 0,2

5 8 8

240x200 350x240 350x240

10|20

30|60

10|20

200

0,4

8

350x240

1-866-960-9400 www.dmm.ca

stainl. steel

0,1 0,2

For technical assistance and orders please contact us:

24

Weighing platE

Max kg

e g

Min g

Min. piece Net weight at weight piece count. approx. g/piece kg

d g

0,5|1 1|2

Total number of pieces

product features

• Counting resolution 150.000 Pt. • Overall dimensions WxDxH: 265x335x10mm (under 15kg)/360x370x115mm • Permitted environmental temperature -10 … +40 °C. • RS232 • Net/Gross-weight to control the consumed weighing range at the touch of a button • Quantity/Weight switch with the touch of a button • Automatic Taring saves time when placing the container • Battery operation possible, internal, approx. 30 h. Charging time approx. 8h • 3 Years warranty

Readout

Reference weight

Input via numerical key pad: • Reference quantity variable • Reference weight in g

Capacity display a bar graph shows the remaining available weighing range Precise counting

When professionalism counts ... use a FTC Counting Scale! Precise counting: the automatic reference optimization gradually improves the average value of the piece weight.

Model

late

ing p

eigh teel w less s Stain 225 mm 275 x

specs/ordering info Model KERN CPB CPB CPB CPB

3K0.1 6K0.2 15K0.5 30K1

g

Min. piece weight at piece count. g/piece

Net weight approx. kg

± 0,4

0,05

4,1

0,2

± 0,8

0,1

4,1

15

0,5

± 1,5

0,25

4,1

30

1

±3

0,5

4,1

Linearity

Max kg

Reproducibility g

0,1

3

0,1

0,2

6

0,5 1

Readout

Weighing range

d g

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

digital calipers from

Zeus Digi Fiber

$1,999 CAD

w ww.s h imana.ca

sliding gauge on carbon fiber

Lightweight Digital Calipers, only 2.5 Kg for a gauge with 1000 mm range!

product features • Sliding gauge in carbon fiber • Tips on hardened, Tin coated stainless steel • Two different upper jaws (type. A or type. B) • Electronic RS232 mm/inc data output, water resistant • With fine adjustment carriage • Clamping screw • Delivery in wooden case

high quality gauges made in italy

specs/ordering info Part# DIGI FIBER 1000 DIGI FIBER 1500 DIGI FIBER 2000

from

Range

Resolution

Accuracy

PRICE

1000 mm 1500 mm 2000 mm

0.01 mm 0.01 mm 0.01 mm

±0.03 mm ±0.05 mm ±0.06 mm

$1,999 $4,295 $5,000

Digi Remor

$567 CAD

from

$54 CAD

Regular Digital Caliper (3 Keys) accords to DIN862 and ISO Standards

special digital gauging caliper

made in italy

Can be used in workshop conditions, has units conversion, data output, zero set at any position.

specs/ordering info Part# DIGI REMOR DIGI REMOR L

from

specs/ordering info

Range

Resolution

10-170 mm 20-180 mm

0.01 mm 0.01 mm

Accuracy

PRICE

± 0.03 mm ± 0.03 mm

$567 $595

Digi Ricor

$735 CAD

Part# ANRDC06 ANRDC08 ANRDC12

Range

Resolution

Accuracy

PRICE

0-150 mm 0-200 mm 0-300 mm

0.01 mm 0.01 mm 0.01 mm

±0.03 mm ±0.03 mm ±0.03 mm

$54 $89 $125

High Precision Caliper

$119 CAD

from

digital depth caliper with movable bridge

precision exceeds DIN862-88

This is a hardened stainless steel digital depth caliper with movable support.

high quality gauges made in italy

Hardened stainless steel measuring surface for long life, depth rod for depth measurement, lock to hold the slider in position, zero-setting, inch/mm conversion and Data Output.

It has electronic RS232, mm/inch conversion, push/pull support on the same level, clamping screw and it is water resistant.

specs/ordering info

specs/ordering info Part#

Range

Resolution

Accuracy

PRICE

Part#

Range

Resolution

Accuracy

PRICE

DIGI RICOR 300 DIGI RICOR 500 DIGI RICOR 600

300 mm 500 mm 600 mm

0.01 mm 0.01 mm 0.01 mm

±0.03 mm ±0.03 mm ±0.03 mm

$735 $924 $1,034

110-051 111-052 111-053

0-150 mm 0-200 mm 0-300 mm

0.005 mm 0.005 mm 0.005 mm

±0.01 mm ±0.02 mm ±0.03 mm

$119 $155 $212

from

Digi Arcer

$212 CAD

from

495 CAD

Digital Calipers without upper jaws with fine adjustment and pre-setting function

hardened stainless steel

Electronic RS232 mm/inch data output, water resistant. high quality gauges made in italy

specs/ordering info Part#

Range

Resolution

Accuracy

PRICE

DIGI ARCER 155 DIGI ARCER 200 DIGI ARCER 300

150 mm 200 mm 300 mm

0.01 mm 0.01 mm 0.01 mm

±0.02 mm ±0.02 mm ±0.02 mm

$212 $250 $438

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc PRECISION IS OUR VISION

TOOLSANDINSTRUMENTS.CA

All in one sliding gauge in hardened stainless steel. Made using Sylvac electronics, with RS232 data output and the option to pre-set two independent reading scales. high quality gauges

With fine adjustment, presetting function and zero-setting at any position. Jaw ends radiused are fit for accurate inside measurement and more durable than the knife edge jaws.

specs/ordering info Part# AN24INCHES AN32INCHES AN40INCHES

Range

Resolution

Accuracy

PRICE

0-600 mm 0-800 mm 0-1000 mm

0.01 mm 0.01 mm 0.01 mm

±0.04 mm ±0.04 mm ±0.04 mm

please call

$495 please call

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

25

height gauges

www.shima na .ca

from

Mini Digital Height Gauge

$99 CAD

from

Single Column Height Gauges

$223 CAD

with Double Datum Surfaces

Both the upside and the underside of the base are datum surfaces. The slider has two jaws on its left side and right side. - the jaw on the slider's left is for the bottom measuring face. - the jaw on the slider's right is for the upside measuring face. (When the base is on the inspection surface plate, the surface of the plate is regarded as the extension of bottom measuring face.)

with carbide-tipped scriber

Carbide-tipped scriber facilitates fine scribing on workpieces. Can easily measure height of small workpieces. The robust construction with a thick column provides highly repeatable measurements. Fine-adjustment carriage to feed the slider finely.

In case the inspection surface plate is unavailable, the upside of the base can be used as an inspection surface plate.

product features • With fine adjustment • Can easily measure height of small workpieces • The base bottom is made of hardened stainless steel • With data hold function and tolerance presetting functions • With absolute and relative measurement functions • With data output port

TOOLSANDINSTRUMENTS.CA

product features • Easy to operate • Units conversion • Zero set at any position • Delivery in wooden case

specs/ordering info specs/ordering info Part# SHAYHG057 SHAYHG074

from

$478 CAD

Range

Resolution

Accuracy

PRICE

0 - 125 mm 0 - 300 mm

0.01 mm 0.01 mm

±0.03 mm ±0.04 mm

$99 $149

Height Gauge with Hand Wheel

Part#

Range

Resolution

Accuracy

PRICE

131-101 131-105 131-106 131-110

0-300mm 0-500 mm 0-600 mm 0-1000 mm

0.01 mm 0.01 mm 0.01 mm 0.01 mm

±0.04 mm ±0.05 mm ±0.06 mm ±0.07 mm

$223 $309 $438 $750

from

High Precision Height Gauges

$1,195 CAD

with large smooth slider feed wheel

Made with hardened stainless steel this high quality height gauge has an ergonomic base in ground cast iron.

The robust construction with a thick column and large hand wheel provides highly repeatable measurements.

product features

product features

• Technical standard: JB5609-91 • Repeatability: 0.01 mm • Max response speed: 1m/s • Units conversion • Zero set at any position • Delivery in wooden case

• Electronic RS232 mm/inch data output water resistant • Regulation ring • Tripping fast (up and down) • Interchangeable accessories • Delivery in wooden case

Part#

Range

Resolution

Accuracy

PRICE

131-503 131-506

0 - 300 mm 0 - 600 mm

0.01 mm 0.01 mm

±0.04 mm ±0.06 mm

$478 $592

For technical assistance and orders please contact us:

1-866-960-9400 www.dmm.ca

high quality gauges made in italy

specs/ordering info

specs/ordering info

26

digital height gage with two columns

Part# RDCT-300 RDCT-600 RDCT-1000

Range

Resolution

Accuracy

PRICE

0-300mm 0-600 mm 0-1000 mm

0.01 mm 0.01 mm 0.01 mm

±0.03 mm ±0.03 mm ±0.04 mm

$1,195 $1,595 $1,745

Prices and specifications subject to change without notification.

Digital Measurement Metrology, Inc

PRECISION IS OUR VISION

dimensional instruments from

3 keys Digital Micrometer

$107 CAD

w ww.s h imana.ca

electronic outside micrometer

Digital Micrometers offer easy reading, gearless precision, with both English and Metric Measurements. An outside micrometer is typically used to measure wires, spheres, shafts and blocks.

product features • Extra large LCD for easy reading • Carbide-tipped measuring faces. • In/metric system conversion at any position. • Manual power on/off. • Zero setting at any position

specs/ordering info 211-101A 211-102A 211-104A

Range

Resolution

Accuracy

PRICE

0-25 mm 25-50 mm 75-100 mm

0.001 mm 0.001 mm 0.001 mm

±0.002 mm ±0.002 mm ±0.003 mm

$107 $125 $157

Horizontal Check Master

$1,995 CAD

from

Digital Thickness Gauges

$151 CAD

ideal mechanical reference artifact for calibration

Steel gauge block s also known as precision step gauge or master gauge block set are named so because it has the ultimate accuracy and is used as the standardised artifact.

precise dimensional measurements

Thick ness gages are used to make precise dimensional measurements on a wide variety of coatings and materials. Fit for measuring the thickness of paper, film, wire, sheet metal, jewelry, leather and similar materials.

product features • Zero setting at any position. • Two types of measuring faces . • In/metric system conversion at any position. • Contact points automatically close when not using.

product features • Parallellism of Block: 1 μm(0 < Measuring Range ≤ 300 mm) • Limit Error: ±1.2 μm(0 < Measuring Range ≤ 300 mm)

specs/ordering info Part#

specs/ordering info Part#

Range

General Step

Accuracy

PRICE

022-153

300 mm

30 mm

±1.2μm

$1,995

from

SDI Micro Digital Indicator

$280 CAD

SHAYTG064 SHAYTG075 SHAYTG065

from

Range

Probe depth

Resolution

Accuracy

PRICE

0-10 mm 0-10 mm 0-10 mm

30 mm 120 mm 30 mm

0.01 mm 0.01 mm 0.001 mm

±0.02 mm ±0.03 mm ±0.009 mm

$151 $180 $316

SDI Digital Indicator

$89 CAD

hi-resolution digital indicators

product features

product features

• Inch/metric • Extra large LCD screen for Easier Reading • Manual ON/OFF • Zero setting at any position • New Outlook with Silver-coated glass protector • Flat back • Response speed: