PRESSURE BALANCE BATH/SHOWER FITTING VOLUME AND ...

UPGRADABLE PRESSURE BALANCE BATH/SHOWER FITTING VOLUME AND TEMPERATURE CONTROL VALVE

MODEL NUMBER: R120 Pressure Balance Rough Valve Body only Direct sweat inlets/outlets. LESS trim. Available Trim Kits Colony Soft Princeton

R120SS Pressure Balance Rough Valve Body only with Screwdriver stops Reliant 3

Seva

Direct sweat inlets/outlets. Screwdriver stops. LESS trim.

Ceramix

R125 Pressure Balance Rough Valve Body only Female thread inlets/outlets. LESS trim. Moments

Standard

Jasmine

Green Tea

R125SS Pressure Balance Rough Valve Body only with Screwdriver stops

Copeland

Female thread inlets/outlets. Screwdriver stops. LESS trim.

R127 Pressure Balance Rough Valve Body only PEX inlets/Direct sweat outlets. LESS trim.

R127SS Pressure Balance Rough Valve Body only with Screwdriver stops

R120 Valve Body Shown

PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim. See reverse for available trim kits. 41mm TO 83mm (1-5/8 TO 3-1/4)

1/2" NPT

GENERAL DESCRIPTION: Cast brass body, washerless 47mm ceramic disc valve cartridge with volume and temperature control, and hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat, threaded, or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trim kits.

PRODUCT FEATURES: Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy control over both water temperature and volume. Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water. Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. Two piece design allows valve to be tested prior to trim installation. Wide Rough-in Range: From 1-5/8" to 3-1/4".

VALVE BODY OPTIONS INLETS 103 mm (4-1/16") SHR. 1/2" NOM. COPPER SWEAT

51.5 mm (2-1/32")

INLETS 1/2" NOM. COPPER SWEAT

103 mm (4-1/16") TUB 1/2" NOM. COPPER SWEAT

FINISHED WALL

SWEAT (R120) 149 mm (5-7/8") 51 mm (2")

SHR. 1/2" NOM. COPPER SWEAT

OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 1651mm (65) AND 1981mm (78)

INLETS 1/2" NPT

103 mm (4-1/16")

TUB 1/2" NOM. COPPER SWEAT

SWEAT (STOPS) (R120SS) OPTION 457 mm (18")

SHR 1/2" NPT

INLETS 86 mm (3-3/8")

25mm (1 MIN.)

86 mm (3-3/8") INLETS 1/2" NPT TUB PORT 1/2" NPT

THREADED (R125) 149 mm (5-7/8")

1/2" 102 mm COPPER (4") TOP OF TUB RIM

86 mm (3-3/8")


BOTTOM OF TUB

TUB 1/2" NOM. COPPER SWEAT INLETS 1/2" NPT

THREADED (STOPS) (R125SS) 109mm (4-1/4") SHR. 1/2" NOM. COPPER SWEAT

52 mm (2-1/32")


165mm (6-1/2") 52 mm (2-1/32")


1/2" PEX INLETS (ASTM F1807)

PEX (R127)


1/2" PEX INLETS (ASTM F1807)

PEX (STOPS) (R127SS)

SUGGESTED SPECIFICATION: Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12____, Trim Kit - American Standard Model # ____.____. B7 © 2009 AS America Inc.

UPGRADABLE PRESSURE BALANCE BATH/SHOWER FITTING VOLUME AND TEMPERATURE CONTROL VALVE

Valve + Trim: Trim Kit & Valve Body Packaged Separately To order: Specify valve body and trim kit desired

FLOW RATE*

8 GALLONS PER MINUTE

Example: R120 - Direct Sweat Valve Body T508.502 - Princeton Bath/Shower Trim Kit

Spout

6 4 2 0 20

40

60

80

100

INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold.

TRIM KITS

TRIM KITS

VALVES

CODES AND STANDARDS R120

R120SS

R125

R125SS

R127

R127SS

Direct Sweat Inlets/ Outlets

Direct Sweat Inlets/Outlets w/ Screwdriver Stops

Female Thread Inlets/ Outlets

Female Thread Inlets/Outlets w/ Screwdriver Stops

PEX Inlets/Direct Sweat Outlets

PEX Inlets/Direct Sweat Outlets w/ Screwdriver Stops

Colony "Soft"

Reliant 3

Reliant 3 w/mod Plate

Princeton

Seva

Copeland

B/S

T675.502

T385.502

T385.522

T508.502

T480.502

T005.502

Shower

T675.501

T385.501

T385.521

T508.501

T480.501

T005.501

Valve

T675.500

T385.500

T385.520

T508.500

T480.500

T005.500

Colony "Soft" with FloWise®

Reliant 3 with FloWise

Seva with FloWise

B/S

T675.508

T385.508

T480.508

Shower

T675.507

T385.507

T480.507

Ceramix

Moments

Standard

Jasmine

B/S

T000.502

T506.502

T6282

T808.502

T010.502

Shower

T000.501

T506.501

T6281

T808.501

T010.501

Valve

T000.500

T506.500

T6280

T808.500

T010.500

Green Tea

B8 © 2009 AS America Inc.

These products meet or exceed the following codes and standards: ANSI A 117.1 ASSE 1016 ASME A112.18.1 CSA B 125 • Showerhead with 2.5gpm/9.5L.min. flow restrictor.

TRIM KITS FOR VOLUME & TEMPERATURE CONTROL VALVES Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.

Trim Kit COLONY SOFT

Model # Description

Finishes

Roughing-In Dimensions

T675.502 BATH/SHOWER Trim Kit • Metal Lever handle • "Easy Clean" Showerhead • Shower arm and flange • Slip-on Diverter tub spout

FINISHED WALL 4" REF. (102mm)

1-5/8" TO 3-1/4" (41mm - 83mm.)

7" REF. (178mm)

T675.501 SHOWER ONLY Trim Kit • Metal Lever handle • "Easy Clean" Showerhead • Shower arm and flange

.002 Polished Chrome .295 Satin Nickel (PVD)

74" FOR HEAD CLEARANCE (188cm)

6" (153mm) 3" (76mm)

18" (457mm) optional

6" (153mm)

1-1/2 REF. (38mm)

T675.500 VALVE ONLY Trim Kit • Metal Lever handle

4" REF. (102 mm)

5-1/8" REF. (130mm) TOP OF TUB RIM BOTTOM OF TUB

COLONY SOFT WITH FLOWISE

T675.508 BATH/SHOWER Trim Kit • Metal lever handle • Water Saving FloWise® Showerhead • Turbine Spray - 1.5gpm max. flow • Angle adjustable • Showerhead, arm and flange • Diverter tub spout • Less valve

6" (153mm) 3" (76mm)


6" (153mm)

1-1/2 REF. (38mm)

4" REF. (102 mm)

5-1/8" REF. (130mm) TOP OF TUB RIM BOTTOM OF TUB

T385.502 BATH/SHOWER Trim Kit • Metal wall escutcheon • Metal lever handle • "Easy Clean" Showerhead • Shower arm and flange • Slip-on diverter tub spout • LESS valve

1-5/8"" TO 3-1/4" (41mm - 83mm) FINISHED WALL

108mm (4-1/4 REF.)

152mm (6 REF.)

T385.501 SHOWER ONLY Trim Kit • Metal wall escutcheon .002 Polished Chrome • Metal lever handle .295 Satin Nickel (PVD) • "Easy Clean" Showerhead • Shower arm and flange • LESS valve T385.500 VALVE ONLY Trim Kit • Metal wall escutcheon • Metal lever Handle • LESS valve


1-5/8" TO 3-1/4" (41mm - 83mm.)

7" REF. (178mm) 74" FOR HEAD CLEARANCE (188cm)

T675.507 SHOWER ONLY Trim Kit • Metal lever handle • Water Saving FloWise Showerhead • Turbine Spray - 1.5gpm max. flow • Angle adjustable • Showerhead, arm and flange • Less valve

RELIANT 3




6" (153mm)

3" (76mm)

18" (457mm) optional 1" MIN. (25mm)

4" (102mm)

5-1/8" REF (130mm) TOP OF TUB RIM

BOTTOM OF TUB

6" (153mm)


Model # Description

Trim Kit RELIANT 3

T385.522 BATH/SHOWER Trim Kit • Large metal wall escutcheon • Metal lever Loop handle • "Easy Clean" Showerhead • Shower arm and flange • Slip-on diverter tub spout • LESS valve

Finishes

Roughing-In Dimensions 1-5/8"" TO 3-1/4" (41mm - 83mm) FINISHED WALL


108mm (4-1/4 REF.)

152mm (6 REF.)

T385.521 SHOWER ONLY Trim Kit • Large metal wall escutcheon • Metal lever Loop handle • "Easy Clean" Showerhead • Shower arm and flange • LESS valve T385.520 VALVE ONLY Trim Kit • Large metal wall escutcheon • Metal lever Loop Handle • LESS valve


9" (228mm)

3" (76mm)


1" REF. (25mm)

13" (330mm)

5-1/8" REF (130mm)

4" (102mm)

TOP OF TUB RIM BOTTOM OF TUB 1-5/8"" TO 3-1/4" (41mm - 83mm)

RELIANT 3 WITH FLOWISE

T385.522 BATH/SHOWER Trim Kit • Metal wall escutcheon • Metal lever handle • Water Saving FloWise® Showerhead • Turbine Spray-1.5gpm max. flow • Angle adjustable • Shower arm and flange • Slip-on diverter tub spout • LESS valve

FINISHED WALL

4" REF (102mm)


7" REF (178mm) 74" FOR HEAD CLEARANCE (188cm)

6" (153mm)

3" (76mm)


1" REF. (25mm)

6" (153mm)

5-1/8" REF (130mm)

4" (102mm)

TOP OF TUB RIM BOTTOM OF TUB

PRINCETON

T508.502 BATH/SHOWER Trim Kit • Metal Lever Handle • Wall escutcheon • Showerhead, arm and flange • Slip-on diverter tub spout • LESS Valve T508.501 SHOWER ONLY Trim Kit .002 Polished Chrome • Metal Lever Handle .068 Blackened Bronze • Wall escutcheon .295 Satin Nickel (PVD) • Showerhead, arm and flange • LESS Valve

7" REF. (178mm) Off 8-1/8" (205mm)

3-5/8 (92mm) optional 18" (457mm) optional

4" REF. (102 mm)

1-1/2 REF. (38mm)

5" REF. (127mm)


TOP OF TUB RIM

1-5/8" TO 3-1/4" (41mm - 83mm.)

7" REF. (178mm)



8" (203mm)

18" (457mm) optional 1-1/2 REF. (38mm)

T480.500 VALVE ONLY Trim Kit • Brass wall escutcheon • Metal Lever handle

4" REF. (102 mm)

TOP OF TUB RIM

B10

4-1/2" (113mm)

7-1/8" (181mm)

5-1/8" REF. (130mm)

BOTTOM OF TUB

© 2009 AS America Inc.

Hot

BOTTOM OF TUB

T480.502 BATH/SHOWER Trim Kit • Brass wall escutcheon • Metal Lever handle • "Vario" adjustable showerhead • Shower arm and flange • Slip-on Diverter tub spout T480.501 SHOWER ONLY Trim Kit • Brass wall escutcheon • Metal Lever handle • "Vario" adjustable showerhead • Shower arm and flange

1-5/8" TO 3-1/4" (41mm - 83mm.)


T508.500 VALVE ONLY Trim Kit • Metal Lever Handle • Wall escutcheon • LESS Valve SEVA



Trim Kit SEVA WITH FLOWISE®

Model # Description T480.508 BATH/SHOWER Trim Kit • Brass wall escutcheon • Metal lever handle • Water Saving FloWise Showerhead • Turbine Spray-1.5gpm max. flow • Angle adjustable • Shower arm and flange • Slip-on diverter tub spout • LESS valve T4 80.507 SHOWER ONLY Trim Kit • Metal wall escutcheon • Metal lever handle • Water Saving FloWise Showerhead • Turbine Spray-1.5gpm max. flow • Angle adjustable • Shower arm and flange

Finishes

Roughing-In Dimensions 1-5/8"" TO 3-1/4" (41mm - 83mm)


FINISHED WALL

4" REF (102mm)

7" REF (178mm) 74" FOR HEAD CLEARANCE (188cm)

8" (203mm)


1" REF. (25mm)

4-1/2" (113mm)

7-1/8" (181mm)

5-1/8" REF (130mm)

4" (102mm)


• LESS valve CERAMIX

T000.502 BATH/SHOWER Trim Kit • Brass wall escutcheon • Metal Lever handle • "Vario" adjustable showerhead • Cast Brass shower arm • Cast Brass diverter tub spout

STANDARD

7" REF. (178mm)

T6281 SHOWER ONLY Trim Kit • Metal wall escutcheon • Porcelain Lever Handle • 5" Adjustable showerhead T62820 BATH/SHOWER Trim Kit • Metal wall escutcheon • Porcelain Lever Handle T005.502 BATH/SHOWER Trim Kit • Metal Lever Handle • Metal wall escutcheon • Adjustable “3 function” showerhead, arm and flange • Slip-on diverter tub spout • LESS Valve T005.501 SHOWER ONLY Trim Kit • Metal Lever Handle • Metal wall escutcheon • Adjustable “3 function” showerhead, arm and flange • LESS Valve T005.500 VALVE ONLY Trim Kit • Metal Lever Handle • Metal wall escutcheon • LESS Valve

1/2" REF . (13mm)

Note: Trim kits CANNOT be used with Ceramix spool type valves.

T6282 Polished Chrome T6282S Satin Nickel (PVD)

4-3/4" (121mm)

6-11/16" (170mm)

5" REF. (127mm)

4" REF. (102 mm)

TOP OF TUB RIM

BOTTOM OF TUB

57mm - 83mm (2-1/4 - 3-1/4)

FINISHED WALL

130mm (5-1/8)REF.

191mm (7-1/2) REF. 1880mm (74) FOR HEAD CLEARANCE 194mm (7-5/8)



457 (18) OPTIONAL

25mm (1)

102mm (4)

143mm (5-5/8) REF.

181mm (7-1/8)

TOP OF TUB RIM

BOTTOM OF TUB

41mm TO 76mm 1-5/8" TO 3"

FINISHED WALL

.002 Polished Chrome .068 Blackened Bronze (PVD) .295 Satin Nickel (PVD)

108mm 4-1/4" REF.

152mm 6" REF. "SEE ILLUSTRATION " 1880mm 74" FOR HEAD CLEARANCE

191mm 7-1/2"

457mm 18" OPTIONAL 38mm 1-1/2"

102mm 4"

124mm 4-7/8" REF.



7-1/8" REF. (182mm)


T6282 BATH/SHOWER Trim Kit • Metal wall escutcheon • Porcelain Lever Handle • 5" Adjustable showerhead • Cast brass I.P.S. diverter tub spout

COPELAND

4" REF. (102mm)


T000.501 SHOWER ONLY Trim Kit • Brass wall escutcheon • Metal Lever handle • "Vario" adjustable showerhead • Cast Brass shower arm T000.500 VALVE ONLY Trim Kit • Brass wall escutcheon • Metal Lever handle

1-5/8" TO 3-1/4" (41mm - 83mm.)

FINISHED WALL



Trim Kit

Model # Description

Finishes

Roughing-In Dimensions FINISHED WALL

MOMENTS

T506.502 BATH/SHOWER Trim Kit • Brass wall escutcheon • Adjustable “3 function” showerhead • Brass diverter tub spout • LESS Valve

3/4" TO 2-3/8" (19mm-60mm)

.002 Polished Chrome .075 Stainless Steel (PVD) 5-5/8" REF. (143mm)

2-3/8" (60mm) 8-1/8" REF. (216mm)


• Brass wall escutcheon • Adjustable “3 function” showerhead • LESS Valve

TUB

18" (457mm) OPTIONAL 1-1/2" REF. (13mm)

T506.500 VALVE ONLY Trim Kit

T808.502 BATH/SHOWER Trim Kit • Brass wall escutcheon • Metal Lever Handle • Rain showerhead • Cast brass shower arm • Cast brass diverter tub spout T808.501 SHOWER ONLY Trim Kit • Brass wall escutcheon • Metal Lever Handle • Rain showerhead • Cast brass shower arm

T010.502 BATH/SHOWER Trim Kit • Metal wall escutcheon • 6 3/4" Rain showerhead • Brass shower arm • Metal diverter tub spout • Metal Lever Handle • LESS valve

TOP OF TUB RIM

BOTTOM OF TUB

.002 .008 .068 .099 .295 .297 .299

Polished Chrome Polished Nickel Blackened Bronze (PVD) Polished Brass (PVD) Satin Nickel (PVD) Satin/Brass mixage (PVD) Pol. Chrome/Brass (PVD) mix.

1-5/8" TO 3-1/4" (41mm - 83mm)

FINISHED WALL

2" (51mm)

4-7/8" (123mm)

1-1/2" REF. 8.5" REF. (215mm) 7-5/8" (194mm)

74" FOR HEAD CLEARANCE (188cm) 18" (457mm) optional

7-5/8" (194mm)

1-1/2" REF. (38mm)

4" (102mm)

T808.500 BATH/SHOWER Trim Kit • Brass wall escutcheon • Metal Lever Handle GREEN TEA

6-1/2" (165mm)

4" (102mm)

• Brass wall escutcheon • LESS Valve JASMINE

7-1/4" REF. (184mm)

TOP OF TUB RIM

BOTTOM OF TUB

.002 Polished Chrome .075 Stainless Steel (PVD)

FINISHED WALL

1-5/8" TO 3"

79mm 3-1/8" REF.

1/2" NPT

241mm 9-1/2" REF.

"SEE ILLUSTRATION "

T010.501 SHOWER ONLY Trim Kit • Metal wall escutcheon • 6 3/4" Rain showerhead • Brass shower arm • Metal Lever Handle • LESS valve

1880mm 74" FOR HEAD CLEARANCE 191mm 7-1/2" Dia. 457mm 18" OPTIONAL 109mm 4-3/16"

T010.500 VALVE ONLY Trim Kit • Metal wall escutcheon • Metal Lever Handle • LESS valve

117mm 4-5/8" REF. 149mm 5-7/8" REF. TOP OF TUB RIM

1/2" NPT 102mm 4"

BOTTOM OF TUB


8-3/8" (213mm)

SHR

T506.501 SHOWER ONLY Trim Kit