Print

MILANO - TECHNICAL CATALOG

DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS GENERAL CHARACTERISTICS FOR FLARED TUBE FITTINGS SAE 37 - JIC TABLE PRESSURE, TUBE AND THREAD The fittings characteristics included on this catalog are similar to standard SAE J846, J514, J515, J531, J518 and DIN EN ISO 8434-2 code: The code system used is similar to standard SAE J846, consists of two number groups and a letters group: the first number group identify fittings, the second one symbolizes the sizes identification, and letters group symbolizes the material and assembly, as described below: FITTINGS SAE IDENTIFICATION: SAE identifies fittings through a six digits number, divided into 3 groups of 2 digits each, representing: a) The fitting’s type; b) The fitting’s format; c) The fitting’s side and combinations.

Pressue Nominal (PN) bar

TUBE Inch Trace

THREAD UNF Class 2A

PN PN PN PN PN PN PN PN PN PN PN

1/4 5/16 3/8 1/ 2 5/8 3/4 7/8 1 1.1/4 1.1/2 2

7/16 x 20 1/2 x 20 9/16 x 18 3/4 x 16 7/8 x 14 1.1/16 x 12 1.3/16 x 12 1.5/16 x 12 1.5/8 x 12 1.7/8 x 12 2.1/2 x 12

350 350 250 250 200 200 160 160 125 100 080

-4 -5 -6 -8 -10 -12 -14 -16 -20 -24 -32

RAW MATERIAL MATERIAL IDENTIFICATION: The raw material is identified by the letters: B = BRASS C = CARBON STEEL S = STAINLESS STEEL Ex: 070102-8-2 C ASSEMBLY IDENTIFICATION: Add the letter "A" to request the fitting with its multiple components (body, nut, and sleeve) Ex: 070102-8-2 CA Add "+ O" to request a fitting with O-ring Ex: 070120-8-8 C+O Add "+ L" to request a fitting with locknut Ex: 070601-8-8 C+L The fitting size is determined by the dash system, each one representing their respective side size. The size of the tube end must precede the thread dimension or the others fitting sides. For fittings with different sizes combination for tube end, the largest tube end must precede the smaller unions, bends and elbows. For "TEEs”, the tube end (1) must be the higher then (2). The traces must be given as the sequency defined below:

Components Body Fitting linear and nut Wide Body Fitting

Steel (C) SAE 12L14 9SMnPb Drawn SAE 1020 1030 / 1035 Forged

Brass (B) Stainless(S) SAE CA 360 SAE 30316 Drawn Drawn SAE CA377 Forged

SAE 30316 Forged

Surface Treatments: Material

Steel (C)

Brass (B) Stainless (S)

Surface Treatment - Zinc Electrodeposition with blue chromate (Trivalent) Resistance: 96 Hours of Salt Fog Testing (Salt Spray) ASTM B-117 - Rust or Black Phosphating (for welding items)

Pickling Pickling and Passivation

ECOLOGICAL SURFACE TREATMENT

(2)

(1)

(3) Ex. 070426-8-6-8 C

Print Page

The MILANO has been using the treatment of zinc electrodepositing with blue shade (Trivalent) environmentally friendly, with the use of trivalent chromium. Other information, please consult our Sales or Technical department. E-mail: [email protected] Phone +55 019 2102-2500 Site: www.milano.ind.br

Print Chapter

82


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS TUBE TO MALE NPT

Male Connector 070102.....

Male Elbow 070202.....

Page 85

Long Male Elbow 071502.....

TUBE TO FEMALE NPT

070101.....

070601.....

Union (Long)

Union (higher hex)

070119.....

UDLJIC.....

Female Branch Tee 070427....

Bulkhead Union Elbow 070701.....

Union Elbow 070201....

Union Tee

070401....

Union Cross 070501....

Page 88

45° Bulkhead Union Elbow 070801.....

TUBE TO STRAIGHT UNF THREAD

Bulkhead Run Tee 070958....

Bulkhead Branch Tee 070959....

Bulkhead LockNut 070118....

Page 89

Connector

Long Connector

Elbow

45° Elbow

Run Tee

070120.....

070122.....

070220.....

070320....

070428....

Print Page

Male Branch Tee 070425....

Page 87

BULKHEAD UNIONS

Bulkhead Union

Female Run Tee 070426....

Female Elbow 070203.....

TUBE TO TUBE

Union

Male Run Tee 070424....

Page 86

Female Bulkhead Connector 070603.....

Female Connector 070103.....

45° Male Elbow 070302....

Branch Tee

070429....

Print Chapter

83


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS TUBE TO SWIVEL NUT

Swivel Nut Elbow 070221.....

Page 90

45° Swivel Nut Elbow 070321....

AUXILIARY COMPONENTS

Nut 070110.....

Long Nut 070111L .....

TUBE END REDUCER

Swivel Nut Run Tee 070432....

Swivel Nut Branch Tee 070433....

Page 91

Inch Sleeve 070115.....

Cap 070112....

Plug 070109....

Page 92

One Piece 070105.....

Two Piece 070123..... (Body) Assembled with Nut 070110

TUBE TO MALE THREAD

Male Adapter BSP / Metric UMJIC........x........ Pag. 93

MALE SWIVEL ADAPTER

Male Swivel Adapter BSP / Metric UPG.....UNFx....... Pag. 94

Male Swivel Adapter BSP / Metric NPT / BSP TAPER (BSPT) UPG......UNFx....... Pag. 95

Notes:

Print Page

Print Chapter

84


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS MALE CONNECTOR 070102

LONG MALE ELBOW 071502

MALE ELBOW 070202

L

M

M

EX

B

Online quotation

A

N3

A

N

P

I

A

Online quotation

Online quotation

B B

Ex. 070102-8-8 C

Ex. 071502-6-8 C

Ex. 070202-8-6 C

45° MALE ELBOW

MALE BRANCH TEE

MALE RUN TEE 070424

070302

M

M2

070425

N

N

M

N

B

B M

A A

Online quotation

M

2

Online quotation

A

A

A

Online quotation

B

Ex. 070302-12-12 C

Ex. 070424-8-8-8 C

Thread A UNF class 2A

T Inch

Trace

1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 7/8 1 1 1.1/4 1.1/4 1.1/2 1.1/2 2

-

4 4 4 5 5 6 6 6 6 8 8 8 8 10 10 10 12 12 12 14 16 16 20 20 24 24 32

Thread B NPT Trace

7/16-20 7/16-20 7/16-20 1 / 2-20 1/2-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 1.1/16-12 1.1/16-12 1.1/16-12 1.3/16-12 1.5/16-12 1.5/16-12 1.5/8-12 1.5/8-12 1.7/8-12 1.7/8-12 2.1/2-12

-

2 4 8 2 4 2 4 6 8 4 6 8 12 6 8 12 8 12 16 12 12 16 16 20 20 24 32

Hex (Ex)

Ex. 070425-8-8-6 C

I

L

M

M2

N

N2

N3

P

14,0 14,0 14,0 14,0 14,0 14,1 14,1 14,1 14,1 16,7 16,7 16,7 16,7 19,3 19,3 19,3 21,9 21,9 21,9 22,6 23,1 23,1 24,3 24,3 27,5 27,5 33,9

31,0 36,0 42,7 31,0 36,1 31,8 36,3 36,3 42,5 38,9 38,9 45,4 47,0 43,1 48,0 49,5 52,3 52,1 57,1 53,1 53,5 58,4 61,5 62,2 68,1 68,1 79,0

22,6 26,9 24,1 26,9 26,9 26,9 29,0 31,2 31,8 31,8 33,7 36,0 36,8 36,8 38,9 42,2 42,2 43,9 46,0 46,0 52,3 52,3 59,2 77,7

18,3 21,1 19,6 21,1 21,1 21,1 22,0 22,3 24,9 24,9 25,1 26,4 28,2 28,2 32,5 32,5 35,3 37,3 37,3 40,4 45,2 56,4

19,8 27,7 19,8 27,7 22,8 27,7 31,0 37,3 31,0 31,0 37,3 40,4 33,0 37,3 40,4 40,4 40,4 42,9 45,2 50,0 59,6 60,5 67,1 76,2

16,3 21,8 16,3 21,8 17,0 21,8 24,1 29,7 24,1 24,1 29,7 30,5 24,8 29,7 30,5 30,5 32,3 32,7 37,6 42,4 45,0 53,6

29,7 36,3 30,7 40,1 46,2 55,1 62,0 67,3 76,5 93,7 104,1 122,2

9,7 14,2 19,0 9,7 14,2 9,7 14,2 14,2 19,0 14,2 14,2 19,0 19,0 14,2 19,0 19,0 19,0 19,0 23,9 19,0 19,0 23,9 23,9 24,6 24,6 25,4 26,2

Inch

1/8-27 1/4-18 1/2-14 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/4-14 3/8-18 1/2-14 3/4-14 1/2-14 3/4-14 1-11.1/2 3/4-14 3/4-14 1-11.1/2 1-11.1/2 1.1/4 1.1/4 1.1/2 2-11.1/2

1/2 9/16 7/8 9/16 9/16 5/8 5/8 3/4 7/8 13/16 13/16 7/8 1.1/8 15/16 15/16 1.1/8 1.1/8 1.1/8 1.3/8 1.1/4 1.3/8 1.3/4 1.11/16 1.11/16 2 2 2.5/8

1 - The table codes refers to the fittings in Carbon Steel (C) To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070102-8-8 S, 070202-8-6 S. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070102-8-8 B 070302-12-12 B.

Print Page

Print Chapter

85


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS FEMALE BULKHEAD CONNECTOR

FEMALE CONNECTOR 070103

070603

L2

L

B A

B

Online quotation

EX1

Ex. 070103-8-8 C

A

Ex. 070603-8-6 C+L

FEMALE BRANCH TEE

FEMALE RUN TEE 070426

FEMALE ELBOW 070203 M1

Online quotation

EX2

070427

M1

M1

M1

A

Online quotation

A

N1

Online quotation

A

M1

N1

B

A

Online quotation

A

B

B

Ex. 070203-6-8 C

Ex. 070426-8-6-8 C


T Inch 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1 1.1/4 1.1/2 2

Trace -

4 4 5 5 6 6 6 8 8 8 10 12 12 14 16 20 24 32

Inch 7/16-20 7/16-20 1/2-20 1/2-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 1.1/16-12 1.1/16-12 1.3/16-12 1.5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

Thread B NPT Trace -2 -4 -2 -4 -2 -4 -6 -4 -6 -8 -8 -8 - 12 - 12 - 16 - 20 - 24 - 32

Inch 1/8-27 1/4-18 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11.1/2 1.1/4-11.1/2 1.1/2-11.1/2 2-11.1/2

Ex. 070427-8-8-8 C

Hex EX1

Hex EX2

Inch

Inch

9/16 11/16 3/4 9/16 3/4 3/4 3/4 13/16 7/8 7/8 1 1.1/8 1.1/8 1.1/8 1.1/8 1.3/8 1.3/8 1.3/8 1.1/2 1.5/8 1.5/8 2 2 2.3/8 2.7/8 -

I1

L

L2

M1

N1

30,5 30,5 32,5 36,6 40,1 44,4 44,4 44,4 45,7 -

46,7 46,7 52,3 59,4 67,6 73,9 73,4 78,5 81,3 -

30,2 35,3 29,7 35,3 35,6 37,1 39,6 45,6 48,0 52,1 52,3 52,3 59,7 63,2 66,5 75,4

27,4 30,9 27,4 30,9 26,9 31,2 33,2 31,6 36,1 36,1 41,7 42,1 48,0 47,2 55,1 59,2 73,4 83,8

16,8 22,4 16,8 22,4 16,8 22,4 25,9 22,4 25,9 31,2 31,2 31,2 34,5 36,1 41,1 43,2 52,8 60,7

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070103-8-8 S, 070603-8-6 S + L. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070203-6-8 B 070426-8-6-8 B.

Print Page

Print Chapter

86


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS UNION (HIGHER HEX)

UNION 070101

UNION (LONG) UDL JIC

070119

2M

L1

L1

A

A Ex1

EX2

Online quotation

A

Ex. 070101-6-6 C

A

A

A

Ex1

Online quotation

Online quotation

Ex. UDL JIC-6-6 C

Ex. 070119-8-8 C

UNION ELBOW

UNION TEE

UNION CROSS

070201

070401

070501

M1

M

M

M

M

Online quotation

A

Online quotation

A M

Ex. 070201-12-12 C

Ex. 070401-16-16-16 C


T Inch 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1.1/4 1.1/2 2

Trace -

4 5 6 8 10 12 14 16 20 24 32

7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1.1/16-12 1.3/16-12 1.5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

A

M

N1

M

A

Online quotation

Ex. 070501-8-8-8-8 C

Hex Ex1 Inch

Hex Ex2 Inch

L1

M

1/2 9/16 5/8 13/16 15/16 1.1/8 1.1/4 1.3/8 1.11/16 2 2.5/8

11/16 3/4 13/16 1 1.1/8 1.3/8 1.1/2 1.5/8 1.7/8 2.1/8 2.3/4

34,8 34,8 35,8 41,1 47,8 54,9 56,1 57,2 61,7 69,8 86,4

22,6 24,1 26,9 31,8 36,8 42,2 43,9 46,0 52,3 59,2 77,7

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C"and put the letter "S". Ex 070101-8-8 S, S 070201-12-12 S. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070401-16-16-16 B, 070501-8-8-8-8 B.

Print Page

Print Chapter

87


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS BULKHEAD UNION

BULKHEAD UNION ELBOW

45° BULKHEAD UNION ELBOW

070601

070701

070801

I1

M9

M4

L4 I2

0,8

K1

I2

K1

M

A

A

M3

2

Online quotation

EX2

Online quotation

A

Online quotation

A

A

Ex. 070601-8-8 C+L

Ex. 070701-12-12 C+L

Ex. 070801-8-8 C+L

BULKHEAD RUN TEE

BULKHEAD BRANCH TEE

BULKHEAD LOCKNUT

070958

070959

070118

M3

M4

M3

M3

K1

EX2 Thread A

K1

I2

A

Ex. 070958-12-12-12 C+L

M4

Online quotation

I2

A A

M3

A

Online quotation

T1

Ex. 070959-8-8-8 C+L

Thread A UNF class 2A Inch Trace class 2B 1/4 -4 7/16-20 5/16 -5 1/2-20 3/8 -6 9/16-18 1/2 -8 3/4-16 5/8 - 10 7/8-14 3/4 - 12 1.1/16-12 7/8 - 14 1.3/16-12 1 - 16 1.5/16-12 1.1/4 - 20 1.5/8-12 1.1/2 - 24 1.7/8-12 2 - 32 2.1/2-12 T

Online quotation

Ex. 070118-12 C

Hex EX2 Inch

I1

I2

K1

L4

M2

M3

M4

M9

T1

11/16 3/4 13/16 1 1.1/8 1.3/8 1.1/2 1.5/8 1.7/8 2.1/8 2.3/4

30,5 30,5 32,5 36,6 40,1 44,4 44,4 44,4 45,7 46,0 53,1

25,9 25,9 27,7 31,8 35,3 39,6 39,6 39,6 40,9 41,1 48,5

2,4 2,4 2,4 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2

52,6 52,6 55,4 62,0 69,6 78,5 79,2 79,8 84,1 89,4 106,7

18,3 19,6 21,1 24,9 28,2 32,5 35,3 37,3 40,4 45,2 56,4

24,6 26,2 27,7 34,5 39,6 45,2 47,2 49,3 55,1 59,4 73,4

40,4 41,1 46,0 53,6 60,7 67,8 69,3 71,1 79,2 86,9 104,4

38,9 38,9 42,4 49,3 55,1 62,0 63,5 65,0 67,3 67,8 73,9

6,4 6,4 6,9 7,9 9,1 10,4 10,4 10,4 10,4 10,4 10,4

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070601-8-8 S + L, 070701-12-12 S + L. To order Brass (B), remove the letter "C" and put the letter "B". Ex. 070601-16-16 B + L, 070118-12 B.

Print Page

Print Chapter

88


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS STRAIGHT THREAD CONNECTOR 070120

STRAIGHT THREAD ELBOW 070220

STRAIGHT THREAD LONG CONNECTOR 070122

L5

M

L6

I

I3

I4

I3

A

Ex. 070120-8-8 C+O

Online quotation

B

EX

A

I5

Online quotation

B

EX

Ex. 070122-12-12 C+O

Ex. 070220-8-8 C+O STRAIGHT THREAD BRANCH TEE 070429

RUN TEE

070428 M

M

M7

M2

Online quotation

B

STRAIGHT THREAD

45° STRAIGHT THREAD ELBOW 070320

M7

A

M

I5 M 8

B

Ex. 070320-8-8 C+O

Inch Trace 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 7/8 1 1 1 1 1.1/4 1.1/4 1.1/4 1.1/2 1.1/2 2

-

4 4 4 4 5 6 6 6 8 8 8 8 10 10 10 12 12 12 12 14 14 16 16 16 16 20 20 20 24 24 32

7/16-20 7/16-20 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 1.1/16-12 1.1/16-12 1.1/16-12 1.1/16-12 1.3/16-12 1.3/16-12 1.5/16-12 1.5/16-12 1.5/16-12 1.5/16-12 1.5/8-12 1.5/8-12 1.5/8-12 1.7/8-12 1.7/8-12 2.1/2-12

Thread B UNF class 2A Trace Inch -

4 5 6 8 5 6 8 10 6 8 10 12 8 10 12 8 10 12 16 14 16 14 16 16 20 16 20 24 24 32 32

7/16-20 1/2-20 9/16-18 3/4-16 1/2-20 9/16-18 3/4-16 7/8-14 9/16-18 3/4-16 7/8-14 1.1/16-12 3/4-16 7/8-14 1.1/16-12 3/4-16 7/8-14 1.1/16-12 1.5/16-12 1.3/16-12 1.5/16-12 1.3/16-12 1.5/16-12 1.5/16-12 1.5/8-12 1.5/16-12 1.5/8-12 1.7/8-12 1.7/8-12 2.1/2-12 2.1/2-12

Hex EX

A

A

Online quotation

B

I5

B

Ex. 070428-12-10-12 C+O Thread A UNF class 2A

T

A

M

Online quotation

M7

I5

A

Online quotation

Ex. 070429-12-12-10 C+O

I

I3

I4

I5

L5

L6

M

M2

M7

M8

14,0 14,0 14,0 14,0 14,0 14,1 14,1 14,1 16,7 16,7 16,7 16,7 19,3 19,3 19,3 21,9 21,9 21,9 21,9 22,6 22,6 23,1 23,1 23,1 23,1 24,3 24,3 24,3 27,5 27,5 33,9

9,1 9,1 9,9 11,1 9,1 9,9 11,1 12,7 9,9 11,1 12,7 15,1 11,1 12,7 15,1 11,1 12,7 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1

35,3 36,8 39,6 47,8 53,1 63,5 68,3 72,1 88,1 98,6 122,9

17,8 19,6 17,8 19,6 22,4 19,6 22,4 25,9 22,4 25,9 29,5 25,9 29,5 29,5 29,5 29,5 29,5 29,5 29,5 29,5

31,2 31,2 33,0 34,8 31,2 33,0 35,1 38,1 36,6 37,6 40,6 44,7 41,7 43,2 47,2 45,2 46,4 50,0 50,8 50,5 51,3 51,8 51,1 51,8 53,8 59,2 55,1 56,9 60,2 64,3 70,6

52,8 54,5 58,7 68,6 77,2 91,7 96,5 101,1 119,1 131,3 159,8

22,6 26,9 24,1 26,9 29,2 31,8 31,8 34,0 36,8 36,8 38,9 42,2 42,2 46,0 43,9 46,0 46,0 52,3 59,2 77,7

18,3 19,6 21,1 24,9 25,4 28,2 32,5 32,5 35,3 37,3 40,4 45,2 56,4

26,2 31,8 27,7 31,8 36,8 33,5 36,8 43,2 39,4 43,2 49,3 45,2 49,3 52,1 50,8 52,1 52,1 57,2 60,7 73,4

26,7 26,7 29,0 33,0 38,6 38,6 40,1 43,9 45,7 47,2 48,5 48,5 47,2

Inch 9/16 5/8 11/16 7/8 5/8 11/16 7/8 1 11/16 7/8 1 1.1/4 7/8 1 1.1/4 7/8 1 1.1/4 1.1/2 1.3/8 1.1/2 1.3/8 1.3/8 1.1/2 1.7/8 1.11/16 1.7/8 2.1/8 2.1/8 2.3/4 2.3/4

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070120-8-8 S + O, 070220-12-12 S + O. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070320-8-8 B + O, 070220-8-8 B + O.

Print Page

Print Chapter

89


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS SWIVEL NUT ELBOW 070221

45° SWIVEL NUT ELBOW 070321 M2

M

M

M5

6

A

A

Online quotation

Online quotation EX3

EX3

A

A

Ex. 070321-12-12 C

Ex. 070221-8-8 C

SWIVEL NUT RUN TEE

SWIVEL NUT BRANCH TEE

070432

070433 M

M5

M

A

A M5

A M

M

A EX3

EX3

Online quotation

Ex. 070432-8-8-8 C

T Inch 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1.1/4 1.1/2 2

Thread A UNF class 2A Trace class 2B -

4 5 6 8 10 12 14 16 20 24 32

7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1.1/16-12 1.3/16-12 1.5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

Online quotation

A

Ex. 070433-12-12-12 C

Hex EX3 Inch 9/16 5/8 11/16 7/8 1 1.1/4 1.3/8 1.12 2 2.1/4 2.7/8

M

M2

M5

M6

22,6 24,1 26,9 31,8 36,8 42,2 43,9 46,0 52,3 59,2 77,7

18,3 19,6 21,1 24,9 28,2 32,5 35,3 37,3 40,4 45,2 56,4

25,4 26,9 31,8 35,1 41,1 44,4 45,2 50,8 58,7 65,8 85,9

23,9 25,4 28,4 32,5 36,6 38,1 41,1 44,4 51,6 57,2 73,9

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070221-8-8 S, 070321-12-12 S. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070432-8-8-8 B, 070221-8-8 B.

Print Page

Print Chapter

90


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS NUT 070110

LONG NUT

INCH SLEEVE

070111

070115

L1

L

D A

Online quotation

EX

A

Online quotation

Online quotation

EX

Ex. 070110-12 C

Ex. 070115-16 C

Ex. 070111L-16 C CAP 070112

PLUG 070109

L1

L3 A

Online quotation

EX

Ex. 070109-20 C

Ex. 070112-16 C

T Inch

Thread A UNF class 2A Trace class 2B

1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1.1/4 1.1/2 2

-

4 5 6 8 10 12 14 16 20 24 32

Online quotation

A EX1

7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1.1/16-12 1.3/16-12 1.5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

Hex EX

Hex EX1

Inch

Inch

9/16 5/8 11/16 7/8 1 1.1/4 1.3/8 1.1/2 2 2.1/4 2.7/8

1/2 9/16 5/8 13/16 15/16 1.1/8 1.1/4 1.3/8 1.11/16 2 2.5/8

D

L

L1

L3

25,4 26,9 27,7 32,5 37,6 42,2 46,0 49,3 55,6 58,7 69,8

10,4 11,2 12,7 14,2 16,8 17,3 19,3 19,8 23,1 28,4 30,2

15,5 17,0 18,3 21,3 24,6 25,9 27,4 28,4 31,0 35,8 44,2

20,3 20,3 21,3 23,9 27,9 32,5 33,3 33,8 36,8 41,9 52,1

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070110-12 S, 070111-12 S. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070115-8 B, 070109-20 B.

Print Page

Print Chapter

91


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS TUBE END REDUCER - ONE PIECE

070105 Online quotation

L

T Nominal outside diameter of the tube

5/8 3/4 7/8 1

Ex. 070105-14-10 C

para para para para

L

Trace

Inch

1/2 5/8 3/4 7/8

-

10 12 14 16

para para para para

-

8 10 12 14

36,5 42,1 46,7 48,5

TUBE END REDUCER - TWO PIECE

070123 Online quotation

Extremity To reduce T

Nominal outside diameter of the tube

L

Reducer Nut 070110

Ex. 070123-10-6 C

3/8 1/2 1/2 5/8 5/8 3/4 3/4 3/4 7/8 7/8 1 1.1/4 1.1/4 1.1/2

para para para para para para para para para para para para para para

L

Trace

Inch 1/4 1/4 3/8 1/4 3/8 1/4 3/8 1/2 3/8 5/8 3/4 3/4 1 1.1/4

-

6 8 8 10 10 12 12 12 14 14 16 20 20 24

to to to to to to to to to to to to to to

-

4 4 6 4 6 4 6 - 8 - 6 - 10 - 12 - 1 - 16 - 20

24,6 25,4 25,4 26,2 26,2 27,7 27,7 30,2 28,7 33,7 37,3 38,8 40,3 42,9

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex 070105-14-10 S, 070123-10-6 S. To order Brass (B), remove the letter "C" and put the letter "B". Ex 070105-10-8 B, 070123-20-16 B.

Print Page

Print Chapter

92


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS MALE ADAPTER BSP THREAD

Online quotation

T UM JIC BSP

I3

I

A EX

BSP

Ex. UMJIC -8X1/2 BSP C

Hex EX Inch

I

I3

L

1/8-28 1/4-19 3/8-19 1/4-19 1/4-19 3/8-19 3/8-19 1/2-14 1/2-14 1/2-14 3/4-14 1-11 1-11 1.1/4-11 1.1/4-11 1.1/2-11 1.1/4-11 1.1/2-11

5/8 3/4 7/8 3/4 3/4 7/8 7/8 1.1/8 1.1/8 1.1/8 1.3/8 1.3/4 1.3/4 2 2 2.3/8 2 2.3/8

14,0 14,0 14,0 14,0 14,2 14,2 16,8 16,8 19,3 21,8 21,8 21,8 23,0 23,0 24,0 24,0 27,4 27,4

7,6 11,2 11,2 11,2 11,2 11,2 11,2 14,5 14,5 14,5 14,5 18,5 18,5 18,5 18,5 18,5 18,5 18,5

27,7 31,5 33,0 31,5 31,8 33,3 37,3 42,2 43,2 47,2 46,7 54,6 55,9 57,7 58,7 58,7 61,7 61,7

Trace

Inch

L

Thread BSP

1/4 1/4 1/4 5/16 3/8 3/8 1/2 1/2 5/8 3/4 3/4 3/4 1 1 1.1/4 1.1/4 1.1/2 1.1/2

-

4 4 4 5 6 6 8 8 10 12 12 12 16 16 20 20 24 24

MALE ADAPTER METRIC THREAD UM JIC M

Online quotation

L I3

I

T

Thread Metric

Hex EX Inch

I

I3

L

M10x1 M12x1,5 M14x1,5 M16x1,5 M20x1,5 M24x1,5 M27x2

14 17 19 22 26 30 36

14,0 14,0 14,2 16,8 19,3 21,8 23,0

7,1 7,6 8,6 9,4 9,9 10,9 11,9

29,5 31,5 32,5 37,1 42,4 47,0 50,0

Inch Trace

A EX

Metric

1/4 5/16 3/8 1/2 5/8 3/4 1

-

4 5 6 8 10 12 16

Ex. UMJIC -8XM16X1,5 C

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex UMJIC 8x1 / 2 BSP S, UMJIC 12XM24X,5 S.

Print Page

Print Chapter

93


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS SWIVEL STRAIGHT THREAD CONNECTOR

Online quotation

UPG UNF x BSP L

T B

EX

I3

BSP

Ex. UPG 3/4 UNFX3/8 BSP C

Thread BSP

L

B

I3

Ex

Inch

Thread UNF class 2B

1/4 5/16 3/8 3/8 1/2 5/8 3/4 1 1.1/4

7/16-20 1/2-20 9/16-20 9/16-20 3/4-16 7/8-14 1.1/16-12 1.5/16-12 1.5/8-12

1/8-28 1/4-19 1/4-19 3/8-19 3/8-19 1/2-14 3/4-14 1-11 1.1/4-11

31,5 36,0 36,5 38,0 40,5 49,0 52,0 57,5 63,5

15,0 17,0 17,5 18,0 19,5 22,5 24,5 27,0 33,5

7,5 11,0 11,0 11,0 11,0 14,5 14,5 18,5 18,5

9/16 5/8 11/16 3/4 7/8 1 1.1/4 1.1/2 2

SWIVEL STRAIGHT THREAD CONNECTOR

Online quotation

UPG UNF x M L T B

EX

I3

Metric

Inch

1/4 5/16 3/8 1/2 5/8 3 /4 1 1.1/4

Thread UNF class 2B

7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1.1/16-12 1.5/16-12 1.5/8-12

Thread Metric

L

B

I3

Ex

M10x1 M12x1,5 M14x1,5 M16x1,5 M20x1,5 M24x1,5 M27x2 M36x2

32,0 36,0 37,5 41,5 47,5 50,0 56,5 63,0

16,5 19,0 19,0 21,0 24,5 25,0 29,0 33,5

8,5 9,0 10,0 11,0 12,0 13,0 14,0 16,0

9/16 5/8 11/16 7/8 1 1.1/4 1.1/2 2

Ex. UPG 7/8 UNFXM20X1,5 C

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex.: UPG 3/4 UNFX3 / 8 BSP S, UPG 1.1/16 UNFXM24X1,5 S.

Print Page

Print Chapter

94


DIN EN ISO 8434-2 - JIC 37° - FLARED TUBE FITTINGS SWIVEL STRAIGHT THREAD CONNECTOR

Online quotation

UPG UNF x BSPT

T

L B

Inch

Thread A UNF class 2B

1/4 5/16 3/8 1/2 1/2 5/8 3/4 3/4 1 1 1.1/4

7/16-20 1/2-20 9/16-18 3/4-16 3/4-16 7/8-14 1.1/16-12 1.1/16-12 1.5/16-12 1.5/16-12 1.5/8-12

Thread BSPT

L

B

P

Ex

34,0 37,0 37,5 40,0 40,0 48,5 51,0 52,5 57,0 60,0 67,0

13,5 15,0 15,5 17,0 17,0 19,5 21,0 21,0 24,0 24,0 28,5

12,0 12,0 12,0 12,0 12,0 16,0 16,0 17,5 17,5 20,5 22,5

9/16 5/8 11/16 7/8 7/8 1 1.1/4 1.1/4 1.1/2 1.1/2 2

P

A

BSPT Ex

Ex. UPG 3/4 UNFX3/8 BSPT C

1/4-19 1/4-19 1/4-19 1/4-19 3/8-19 1/2-14 1/2-14 3/4-14 3/4-14 1-11 1.1/4-11

SWIVEL STRAIGHT THREAD CONNECTOR

Online quotation

UPG UNF x NPT T L

Inch B

Thread A UNF class 2B

Thread NPT

7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 7/8-14 1.1/16-12 1.1/16-12 1.5/16-12

1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14

L

B

P

Ex

37,0 40,0 40,4 40,4 42,9 47,5 52,0 54,6 54,6 59,2

13,5 15,0 15,5 15,5 17,0 19,5 19,5 21,0 21,0 24,0

14,2 14,2 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0

9/16 5/8 11/16 3/4 7/8 1 1 1.1/4 1.1/4 1.1/2

P

A

NPT Ex

Ex. UPG 7/8 UNFX1/2 NPT C

1/4 5/16 3/8 3/8 1/2 5/8 5/8 3/4 3/4 1

1 - The table codes refers to the fittings in Carbon Steel (C). To order Stainless Steel (S), remove the letter "C" and put the letter "S". Ex UPG 3/4 UNFX3/8 BSPT S, UPG 1.1/16 UNFX1/2 NPT S.

Print Page

Print Chapter

95