PRODUCT SPECIFICATION DESIGN & DEVELOPMENT: In late 2010 the Nissan Navara D40 ST-X 550 was released with a 3.0L V6 Diesel engine. To feed the more powerful power plant Nissan have installed a large intercooler between the chassis rails at the front of the vehicle. This has prevented fitment of the existing ARB bull bar for 2 reasons; 1, The size and position of the intercooler does not allow the existing mount brackets to be fitted and 2, there was concern that fitment of a bullbar and winch would significantly block the air flow to the intercooler, potentially impeding performance. As a solution to this, new mount brackets have been developed allowing fitment to the chassis rails without interfering with the intercooler. These mount brackets are both airbag and winch compatible with the bar tested to take a maximum winch force of 9500lbs (Warn XP 9.5) in a single line pull. To allow air flow to the intercooler a new style of bar has been developed. This uses an open lower pan design with a higher winch position allowing a greater open area than the original bumper bar whilst still providing frontal protection. A grille is installed in the lower aperture of the bar to prevent large debris from damaging the engine components. For winch fitment, the 3540050 Winch Install kit is required. This includes a folding licence plate bracket, longer power cables and all fasteners required to fit a Warn winch to the bar. Sales staff and customers should be aware that the bar should not be fitted with a winch without this kit as the folding bracket allows the license plate to be positioned in a way that does not affect air flow through the bar. The bar features underwing panels and centre stone shield as standard. A new UVP panel set is under development as the current model does not fit. Nissan Navara D40 V6 - Deluxe Combination Bar
Durable steel construction for maximum protection Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength and approach angle Split centre & open lower pan design for maximum strength and airflow Cover straps attached to the uprights ensure there are no exposed edges Continuous uprights through the bumper section of the bar strengthens the outer frame Vehicle specific design to complement the Navara and maximise functionality; Superbly engineered, air bag compatible mounting system secures to chassis via high tensile bolts Equally suited to both winch and non-winch applications Will accommodate Warn low mount model electric winches up to the XP9500 Twin Hi-Lift jacking points located in the pan of the bar Provision to accommodate a range of IPF & ARB driving lights Injection moulded fog light/turn signal surrounds Durable urethane buffers Retains original equipment tow points Two aerial brackets located in the frame of the bar Finished in a hard-wearing powder coat with the added option of colour coding to individual vehicles
DRIVING LIGHT MOUNTS: Combination bars include laser cut holes in the top of the centre pan for fitment of a range of compatible driving lights such as ARB Intensity LED & IPF 108, 808, 800 & 900 series lights.
AERIAL MOUNTS: Two aerial mounts are welded to the centre tube to allow fitment of UHF/AM radio and mobile phone aerials/ antennas.
Nissan Navara D40 V6 - Deluxe Combination Bar
||
www.arb.com.au
2
WINCH MODEL FITMENT: Navara Combination style winch bars fit the following winches: • • • • • •
An optional winch mounting kit P/No 3540050 is required for fitting all winch models.
FOG LIGHT: ARB Fog Light surrounds incorporating recessed clearance/indicator light assemblies are fitted as standard and can be upgraded to include the optional ARB Fog Light kit P/No 6821201.
HILIFT JACKING POINTS: Each bar comes standard with two reinforced HiLift jacking points fitted to the centre pan.
