Product Specification

Product Specification

+ DIAREX High Impact Polystyrene DI Typical Properties :

Properties Melt Flow Rate (200oC, 5 kg) Tensile Strength @ Yield Tensile Elongation Flexural Strength Flexural Modulus ( x10,000) Izod Impact Strength Rockwell Hardness Vicat Softening Point (1kg) Deflection Temperature (18.56 kg/cm2) 60o Gardner Gloss Underwriter Laboratory Type

H350 3.5 295 4,200 60 420 6,000 1.9 27 11 2 R112 104 219 78 172 UL-94HB HIPS High Impact

Typical Value

H350E

H950

3.8 254 3,600 57 333 4,700 1.8 25.3 14 2.6 R112 101 213 76 169 UL-94HB HIPS High Impact

3.0 345 4,900 50 457 6,500 1.8 26 11 2 R112 105 221 79 174 90 UL-94HB HIPS High Impact

Unit g/10 min kg/cm2 lb/in2 % kg/cm2 lb/in2 kg/cm2 lb/in2 kg.cm/cm ft.lb/in Scale o C o F o C o F %

Data based on injection molding test pieces. Note : The above data are intended to serve as a representative guide only for natural specimens and do not necessarily represent guaranteed values.

Copyright © 2012, PTT Global Chemical Public Company Limited All rights reserved.

Test Method ASTM D1238 ASTM D638 ASTM D638 ASTM D790 ASTM D790 ASTM D256 ASTM D785 ASTM D1525 ASTM D648 ASTM D523