Quick Install Guide - pdfstream.manualsonline.com

USB 2.0 Digital TV Receiver (ISDB-T) DTR-100DB

Quick Install Guide

2011-K10050-000

Page 1

Table of Contents 1 SYSTEM REQUIREMENTS........................................... 3 2 PACKAGE CONTENTS ................................................. 3 3 BEFORE STARTUP........................................................ 3 3.1 Physical Specification............................................. 3 3.2 Physical Installation ............................................... 4 4 USER INTERFACE ......................................................... 7 4.1 Launch Presto! PVR Application ......................... 7 4.2 Main Monitor ......................................................... 7 4.3 Main screen & Menu ............................................. 7 5 FURTHER INFORMATION .......................................... 10

Page 2

1 System Requirements Š Pentium 4 compatible processor 1.2GHz or higher Š Š Š Š Š Š Š Š Š

(2.0GHz recommended) Minimum 256MB RAM or above (512MB recommended) VGA card with minimum 32MB memory AC97 compatible sound card 1 GB free HD space CD-ROM drive (For software installation) One available USB2.0 port Microsoft DirectX 9 or above Windows 2000(SP4) / XP (SP2) / Vista (32bit) Windows Media Player 9 or above

2 Package Contents Š DTR-100DB USB 2.0 Digital TV Receiver Š Installation CD (Include User Manual, Quick Installation Guide, Utility and Driver)

Š ISDB-T TV Antenna

3 Before Startup 3.1 Physical Specification Outlook DTR-100DB USB 2.0 Digital TV Receiver

Page 3

3.2 Physical Installation This chapter explains how to install DTR-100DB with your computer or notebook. 1. Connecting USB Port Connect USB connector of the DTR-100DB to the USB port on your computer or notebook. 2. Connecting Terrestrial Antenna Connect the supplied ISDB-T antenna to the VHF/UHF port on the backside of the DTR-100DB.

3. Install Device Driver & Utility (1) After installing the DTR-100DB into your computer or notebook, the system will find a new hardware device as the below figure “Found New Hardware Wizard” will appear. Please click “Cancel” to exit the Wizard.

Page 4

(2) Please insert the supplied CD into your CD drive, and then install the utility and driver. There are three utilities in the supplied CD: Windows Media Player 9, Microsoft DirectX 9, and Presto! PVR. The installation procedure: Windows Media Player 9 Î Microsoft DirectX 9Î Presto! PVRÎ DTR-100DB’s Driver.

Page 5

Parameter Windows Media Player 9

Microsoft DirectX 9

Description Before installing DTR-100DB’s driver, it is necessary to install Windows Media Player 9 and DirectX 9, or higher version for your Operating System. If your system already has Windows Media Player 9 and DirectX 9, or higher version, you can skip this part of installation.

Presto! PVR

This option to install PVR software and this is user interface allow you to access and work with the digital video, and recorded TV programs from your TV or home computer.

Driver

To install the DTR-100DB’s driver.

"Note

(1) If you install the DTR-100DB with Notebook, please make sure the “Power Saving” function is turned OFF. (The “Power saving” function will lower down the CPU Performance and may effect the DTR100DB’s operation). (2) Be sure, if you connect the antenna to the DTR-100DB and please adjust it to a better reception angle and location every time.

Page 6

4 User Interface Before you begin, make sure that the antenna is connected to the DTR-100DB device.

4.1 Launch Presto! PVR Application (1) Double-click Desktop Icon “Presto! PVR”.

4.2 Main Monitor NewSoft Presto! PVR is an application for turning your computer into a media center. It allows you to watch and record your favorite TV programs. You have the convenience of a VCR without having to rewind any tape.

4.3 Main screen & Menu

Page 7

Parameter a Program Status

Description At the top of the presentation area, the program status (Recording or playing), as well as the video quality, will be listed. PS. The Program status will appear only when playing or recording a program.

b

c d

Information Window

List the time along with the channel number and name.

Full Screen Minimize Screen Close Screen

There are the buttons for controlling the viewer.

EPG / Captions

There are special feature buttons.

Settings / Help e

History

Check the programs that have already been record

f

Previous Channel

There buttons are for choosing a channel to watch on TV. Either by going up or down a channel goes back to the previously viewed channel, or choosing from the channel list.

Next Channel Last Channel Channel List Viewer

Page 8

g

Increase Volume Decrease Volume

Mute h

Stop Backward Forward

i

Record Pause

The volume controls let you turn it up and down as well as off, and the indicator show the current volume level The program control buttons are used for going forward, going backward, or to stop time shifting and recording. They are available after recording or time shifting button is clicked or after you have chosen a program or video to play from the History dialog box. These buttons are used for recording program or time shifting.

Page 9

5 Further Information If you still have any problem on connecting, please check user’s manual on the bundled CD for detail configuration. If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: [email protected]

Page 10