reflection WARDROBE. Thank you for purchasing the Reflection Wardrobe. ... for
assembly, place the contents on a carpeted or padded area to protect themĀ ...
reflection
WARDROBE
assembly hardware
16 - wood dowels
24 - large bolts
6 - hinges
8 - shelf supports
4 - small bolts
12 - small screws
mounting hardware
Thank you for purchasing the Reflection Wardrobe. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
4 - plastic 4 - small anchors screws
4 - large screws
2 - large screws
24 - medium screws
4 - mounting brackets
2 - wall straps
Missing hardware? Please call 800.606.6387 for replacements.
tools required
phillips head screwdriver (We recommend the use of hand tools instead of power tools)
components
1 - partition
1 - top panel
1 - bottom panel
1 - rod
2 - side panels (1 left, 1 right) Made in Vietnam - r04
1 - fixed shelf
2 - hook assemblies
2 - adjustable shelves
1 - back panel
2 - doors (1 left, 1 right)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 1 of 6
reflection
WARDROBE
left and right side panels
fixed shelf
1
Insert 2 wood dowels into fixed shelf as shown.
2
Insert 2 wood dowels into right and left side panels as shown.
top panel bottom panel
3
Insert 6 wood dowels into bottom panel.
Made in Vietnam - r04
4
Insert 4 wood dowels into top panel.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 2 of 6
reflection
WARDROBE
Note: Do not over tighten the bolts
fixed shelf
partition
right side panel
fixed shelf
5
Fit dowels of fixed shelf into corresponding holes of partition and secure with 3 large bolts, using a phillips head screwdriver. Do not over tighten the bolts.
6
Fit dowels of right side panel into fixed shelf and secure with 3 large bolts.
left side panel
back panel
7
A. With assistance of another adult, fit back panel into groove of right side panel. B. Fit dowels of left side panel into fixed shelf and secure with 3 large bolts.
Made in Vietnam - r04
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 3 of 6
reflection
WARDROBE
bottom panel
8
Fit dowels of bottom panel into corresponding holes of assembly and secure with 9 large bolts.
A
top panel
B
9
A. Fit dowels of top panel into corresponding holes of assembly and secure with 6 large bolts. B. Secure back panel to assembly with 2 large screws.
Made in Vietnam - r04
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 4 of 6
reflection B
WARDROBE
hook assembly
NOTE: Do not over tighten the screws
left door
A left door
right door
10
A. Attach 3 hinges to left and right doors with 2 small screws per hinge. Secure, but do not over tighten, screws with a phillips head screwdriver. B. Attach each hook assembly to left and right doors with 4 small bolts.
11
Position case assembly on left side panel as shown. With assistance, attach hinges of left door with 4 medium screws per hinge. With assitance, position case assembly on its right side and repeat step 11 for hinges of right door.
A
rod
C NOTE: When positioning assembly upright, be careful to support the doors to prevent them from opening or closing suddenly
12
A. With assistance, position assembly upright. Insert 8 shelf supports into assembly as shown. Press firmly to secure. B. Place 2 adjustable shelves onto shelf supports and make sure each shelf is securely supported. C. Place rod onto corresponding supports inside assembly. Assembly is now complete.
A Badjustable shelf
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Made in Vietnam - r04
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 5 of 6
reflection
WARDROBE
optional wall mounting instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
C
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
D
A
E
A. Attach 2 brackets to the top of the assembled unit with 2 small screws per bracket. B. With the assistance of another adult, place the unit in desired location against the wall. Mark the location of the hole in the bracket on the wall. Move the unit out of the workspace. C. Drill holes slightly smaller in diameter than the anchors. Insert 1 plastic anchor into each hole until they are flush to the wall. D. Insert 2 large screws through each bracket and plastic anchor. Secure, but do not over tighten with a phillips head screwdriver. E. Place the unit back into position against the wall and thread the wall strap through both brackets and pull until tight. Wall mounting assembly is now complete.
hinge adjustment
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A. 2) Depth adjustment: Loosen screw A, push hinge arm forwards or backwards, re-tighten screw A and secure screw B with a 1/4 turn clockwise. 3) Height adjustment: Loosen screw C, adjust door height and re-tighten screw C.
Made in Vietnam - r04
A
A
C C
B
B 1
2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
3
Page 6 of 6