RESEARCHERS & RESEARCH STUDENTS. IN SUSTAINABLE ENGINEERING CLUSTER. RESEARCHERS. Dato' Prof. Dr. Kamarudin Hussin. B.Sc., M.Sc., ...
RESEARCHERS & RESEARCH STUDENTS IN SUSTAINABLE ENGINEERING CLUSTER RESEARCHERS Prof. Dr.Shamsul Baharin Jamaludin B.App.Sc., M.Sc. (Univerisiti Sains Malaysia) Ph.D.(University of Leeds, UK) Research area: Composite metal, biomaterials, sustainable materials
Dato' Prof. Dr. Kamarudin Hussin B.Sc., M.Sc., Ph.D. (Universiti Sains Malaysia) Research area: Green technology
Prof. Dr. Zul Azhar Zahid Jamal B.Sc M.A. (Physics), Western Michigan University, USA, Ph.D. (Universityi of Liverpool, UK) Research area:Electronic Materials
Dr Mazlee Mohd Noor Dip.Eng. (Univerisiti Teknologi Malaysia) B.Eng., M.Sc. (Universiti Sains Malaysia) Ph.D (Universiti Malaysia Perlis) Research area: Composite metals, materials
Dr. Md Fazlul Bari B.Sc., M.Sc. (Univ Rajshahi, Bangladesh), Ph.D. (Universiti Sains Malaysia) Research area: Extractive metallurgy
Assoc. Prof. Ir. Mohd Ichwan Nasution B.Eng., M.Sc. (Kiev - Ukraina) Research area: Foundry metallurgy
RESEARCH STUDENTS Master Science by Research [Completed] Mohd Sobri Idris, (2003), Characterization of clinkers and effect to the cement production (Completed 2006) UNIMAP Nurhidayah Ahmad Zaidi, (2004), “ Fabrication and properties of cobalt implant composite” (Completed 2007) UNIMAP Zamri Yusoff, (2005), “Corrosion behaviour of Al 2014/Al2O3 and Al 2009/SiCw composite” (Completed 2007) UNIMAP Md Sohrab Hossain, (2006), “Preparation of microcapsule containing extractant to recover copper from electronic circuit board” (Completed 2009) UNIMAP Josef Hadipramana, (2007), “Ageing behaviour in Al-Cu metal matrix composite” (Completed 2009) UNIMAP Murizam Darus, 2003, “ Effect of heat treatment on the properties of recycled aluminium alloy (Completed 2009) UNIMAP
Raudhah Othman@Mustafa, (2007)” Effect of Nickel on Microstructure and some other properties of Co-Cr-Mo (Cobalt F75) Dental alloys using powder metallurgy” (Completed 2010) UNIMAP Rohaya Abdul Malek, (2007) “The effect of pressure on powder metallurgy in F75 biocompatible materials for biomedical applications” (Completed 2010) UNIMAP Alida binti Abdullah, (2009) “Development of coconut fibre reinforced cement composite application in construction” (Completed 2012) UNIMAP Doctor of Philosophy [Completed] Zuhailawati Hussain, (1999), The development of copper matrix composite for spot welding electrode (completed 2004) UNIMAP-USM Khairel Rafezi Ahmad, (2001), Fabrication, microstructure, properties and joining of composite aluminium reinforced with alumina particles (completed 2009) UNIMAP-USM MS. Noorzahan Begum, (2006), Solvent extraction of some metals ions by cyanex 272, 302, 301: equilibrium and kinetics study (completed 2009) UNIMAP Mazlee Mohd Noor, (2006), Fabrication and properties of recyled aluminium matrix composite (completed 2009) UNIMAP Saidatul Akmar Shamsudin, (2006), Fabrication and properties of ironalummina composite (completed 2010) UNIMAP-USM Zuraidawani Che Daud, (2007) “Synthesis and properties of cobaltchromium-molybdenum biocompatible materials for biomedical applications” (completed 2011) UNIMAP (Main) Zamri Yusoff, (2008), “Development and characterization of composite aluminium reinforced with palm ash” (Writing stage) UNIMAP (Main) Master Science by Research [On-going] Mohd Tajuddin Mohd Idris, (2007) “Procesing and Fabrication Biomaterial Powder Metallurgy Co-Cr-Mo using Arc Melting Technique” (on-going) UNIMAP
Mohd Hashahrin Firdaus bin Az’ri (2007) “ The study of alloying addition on Mg alloys sacrificial anode performance” (Writing stage) Noorsyakirah binti Abdullah, (2009) “Processing characteristics of metal injection moulding (MIM) of CoCrMo alloy powder using biocomposite binder” (on-going) UNIMAP Nurul Razliana binti Abdul Razak, (2009) “Fabrication and characterization of aluminium-magnesium silicate as a catalyst for conversion of plastic to oil” (on-going) UNIMAP Noorazimah binti Mohd Ab Llah. (2009) “Hydroxyapatite-Co F75 functionally graded biomaterials fabricated by powder metallurgy” (Writing stage) UNIMAP Mohd Radzi bin Ali, (2009) “Fabrication and properties of brake pad using fly ash and waste PCB” (on-going) UNIMAP Nur izzati Muhammad Nadzri (2011) “Development of coconut fibre-fly ash reinforced cement composite for application in construction” (on-going) UNIMAP Chan Kah Leong, (2011) “Synthesis and characterization of porous cobalt based alloy F75 scaffold fabricated by powder metallurgy” (on-going) UNIMAP Doctor of Philosophy [On-going] Che Mohd Ruzaidi Ghazali, (2006), Fabrication and properties of metal filled polymer (Writing stage ) UNIMAP Nur Maizatul Shima binti Adzali, (2008) “The development and characterization of magnesium alloys for biomaterials implant by powder metallurgy” (writing stage) UNIMAP Wan Abd Rahman Assyahid bin Wan Ibrahim, (2009) “Development of hard and wear resistance composite using microwave sintering process” (ongoing) UNIMAP Rahadiana Dwi Nofianti, (2009) “Synthesis of NiCuZn Ferrite nanoparticles using co-precipitation method and characterization of its magnetic properties” (on-going) UNIMAP
Sri Asliza binti Md Amin, (2011) “ Synthesis of Nickel/ Hydroxyapatite composite for biomaterials application” (on-going) UNIMAP Mohd Zaheruddin bin Kasmuin, (2011) “ Study of electroless deposition of cobalt onto Hydroxyapatite and solid state sintering” (on-going) UNIMAP (Co)
